sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

USB: EHCI: Allow EHCI post-powerup configuration in board files 

This patch allows USB to work on some hosts, which need additional frobing after
the host was powered up via regular USB powerup sequence.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Jason Liu <r64343@freescale.com>
This commit is contained in:
Marek Vasut 2011-07-11 02:37:01 +02:00 committed by Remy Bohmer
parent 055d969332
commit 3874b6d674
1 changed files with 10 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
drivers/usb/host/ehci-hcd.c
View File

@ -205,6 +205,14 @@ static inline void ehci_invalidate_dcache(struct QH *qh)
}
#endif /* CONFIG_EHCI_DCACHE */
void __ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
{
mdelay(50);
}
void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
__attribute__((weak, alias("__ehci_powerup_fixup")));
static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec)
{
uint32_t result;
@ -713,8 +721,8 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
* usb 2.0 specification say 50 ms resets on
* root
*/
wait_ms(50);
/* terminate the reset */
ehci_powerup_fixup(status_reg, &reg);
ehci_writel(status_reg, reg & ~EHCI_PS_PR);
/*
* A host controller must terminate the reset