configs: add configuration for ap1 and jb02

u-boot/include/configs/ap1.h

@@ -0,0 +1,65 @@
+/*
+ * This file contains the configuration parameters for the dbau1x00 board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/ar7240.h>
+#include <config.h>
+
+#define CONFIG_AR7240 1
+#define CONFIG_MACH_HORNET 1
+#define CONFIG_HORNET_1_1_WAR 1
+
+/* enable watchdog */
+#define CONFIG_HW_WATCHDOG
+
+#define CFG_CMD_BOOTCYCLE
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ *-----------------------------------------------------------------------
+ */
+ 
+#define CFG_MAX_FLASH_BANKS     1
+#define CFG_MAX_FLASH_SECT      256
+#define CFG_FLASH_SECTOR_SIZE   (64*1024)
+#define CFG_FLASH_SIZE          0x01000000
+
+#define BOARDCAL                        0x9fff0000
+
+#if (CFG_MAX_FLASH_SECT * CFG_FLASH_SECTOR_SIZE) != CFG_FLASH_SIZE
+#	error "Invalid flash configuration"
+#endif
+
+/* pll and ddr configuration */
+#define CONFIG_40MHZ_XTAL_SUPPORT 1
+#define NEW_DDR_TAP_CAL 1
+
+#undef CFG_PLL_FREQ
+#define CFG_PLL_FREQ	CFG_PLL_400_400_200
+
+#include <configs/ar7240_freq.h>
+
+#define CFG_ATHRS26_PHY  1
+
+#define CONFIG_IPADDR   192.168.2.100
+#define CONFIG_SERVERIP 192.168.2.254
+#define CFG_FAULT_ECHO_LINK_DOWN    1
+
+#define RECOVERY_FILENAME_STRING "openwrt-ar71xx-generic-sysmo-sob-ap1-squashfs-sysupgrade.bin"
+
+#define CFG_PHY_ADDR 0 
+
+#define CFG_AG7240_NMACS 2
+
+#define CFG_GMII     0
+#define CFG_MII0_RMII             1
+#define CFG_AG7100_GE0_RMII             1
+
+#include <configs/common.h>
+
+#include <cmd_confdefs.h>
+
+#endif	/* __CONFIG_H */

u-boot/include/configs/jb02.h

@@ -0,0 +1,65 @@
+/*
+ * This file contains the configuration parameters for the dbau1x00 board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/ar7240.h>
+#include <config.h>
+
+#define CONFIG_AR7240 1
+#define CONFIG_MACH_HORNET 1
+#define CONFIG_HORNET_1_1_WAR 1
+
+/* enable watchdog */
+#define CONFIG_HW_WATCHDOG
+
+#define CFG_CMD_BOOTCYCLE
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ *-----------------------------------------------------------------------
+ */
+ 
+#define CFG_MAX_FLASH_BANKS     1
+#define CFG_MAX_FLASH_SECT      256
+#define CFG_FLASH_SECTOR_SIZE   (64*1024)
+#define CFG_FLASH_SIZE          0x01000000
+
+#define BOARDCAL                        0x9fff0000
+
+#if (CFG_MAX_FLASH_SECT * CFG_FLASH_SECTOR_SIZE) != CFG_FLASH_SIZE
+#	error "Invalid flash configuration"
+#endif
+
+/* pll and ddr configuration */
+#define CONFIG_40MHZ_XTAL_SUPPORT 1
+#define NEW_DDR_TAP_CAL 1
+
+#undef CFG_PLL_FREQ
+#define CFG_PLL_FREQ	CFG_PLL_400_400_200
+
+#include <configs/ar7240_freq.h>
+
+#define CFG_ATHRS26_PHY  1
+
+#define CONFIG_IPADDR   192.168.2.100
+#define CONFIG_SERVERIP 192.168.2.254
+#define CFG_FAULT_ECHO_LINK_DOWN    1
+
+#define RECOVERY_FILENAME_STRING "openwrt-ar71xx-generic-sysmo-sob-jb02-squashfs-sysupgrade.bin"
+
+#define CFG_PHY_ADDR 0 
+
+#define CFG_AG7240_NMACS 2
+
+#define CFG_GMII     0
+#define CFG_MII0_RMII             1
+#define CFG_AG7100_GE0_RMII             1
+
+#include <configs/common.h>
+
+#include <cmd_confdefs.h>
+
+#endif	/* __CONFIG_H */