Moved mpc8641hpcn_board_reset() out of cpu/ into board/.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
This commit is contained in:
Jon Loeliger 2006-05-31 11:24:28 -05:00
parent b2a941de06
commit 4d3d729c16
2 changed files with 99 additions and 84 deletions

View file

@ -25,6 +25,7 @@
*/ */
#include <common.h> #include <common.h>
#include <command.h>
#include <pci.h> #include <pci.h>
#include <asm/processor.h> #include <asm/processor.h>
#include <asm/immap_86xx.h> #include <asm/immap_86xx.h>
@ -35,6 +36,9 @@
extern void ft_cpu_setup(void *blob, bd_t *bd); extern void ft_cpu_setup(void *blob, bd_t *bd);
#endif #endif
#include "pixis.h"
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc(unsigned int dram_size); extern void ddr_enable_ecc(unsigned int dram_size);
#endif #endif
@ -292,4 +296,93 @@ ft_board_setup(void *blob, bd_t *bd)
#endif #endif
void
mpc8641_reset_board(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char cmd;
ulong val;
ulong corepll;
if (argc > 1) {
cmd = argv[1][1];
switch (cmd) {
case 'f': /* reset with frequency changed */
if (argc < 5)
goto my_usage;
read_from_px_regs(0);
val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10));
corepll = strfractoint(argv[3]);
val = val + set_px_corepll(corepll);
val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10));
if (val == 3) {
printf("Setting registers VCFGEN0 and VCTL\n");
read_from_px_regs(1);
printf("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n");
set_px_go();
} else
goto my_usage;
while (1); /* Not reached */
case 'l':
if (argv[2][1] == 'f') {
read_from_px_regs(0);
read_from_px_regs_altbank(0);
/* reset with frequency changed */
val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10));
corepll = strfractoint(argv[4]);
val = val + set_px_corepll(corepll);
val = val + set_px_mpxpll(simple_strtoul(argv[5], NULL, 10));
if (val == 3) {
printf("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
set_altbank();
read_from_px_regs(1);
read_from_px_regs_altbank(1);
printf("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n");
set_px_go_with_watchdog();
} else
goto my_usage;
while(1); /* Not reached */
} else if(argv[2][1] == 'd'){
/* Reset from next bank without changing frequencies but with watchdog timer enabled */
read_from_px_regs(0);
read_from_px_regs_altbank(0);
printf("Setting registers VCFGEN1, VBOOT, and VCTL\n");
set_altbank();
read_from_px_regs_altbank(1);
printf("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n");
set_px_go_with_watchdog();
while(1); /* Not reached */
} else {
/* Reset from next bank without changing frequency and without watchdog timer enabled */
read_from_px_regs(0);
read_from_px_regs_altbank(0);
if(argc > 2)
goto my_usage;
printf("Setting registers VCFGNE1, VBOOT, and VCTL\n");
set_altbank();
read_from_px_regs_altbank(1);
printf("Resetting board to boot from the other bank....\n");
set_px_go();
}
default:
goto my_usage;
}
my_usage:
printf("\nUsage: reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n");
printf(" reset altbank [cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>]\n");
printf("For example: reset cf 40 2.5 10\n");
printf("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n");
return;
} else
out8(PIXIS_BASE+PIXIS_RST,0);
}

View file

@ -32,7 +32,10 @@
#include <ft_build.h> #include <ft_build.h>
#endif #endif
#include "../board/mpc8641hpcn/pixis.h" #ifdef CONFIG_MPC8641HPCN
extern void mpc8641_reset_board(cmd_tbl_t *cmdtp, int flag,
int argc, char *argv[]);
#endif
int checkcpu (void) int checkcpu (void)
@ -146,9 +149,7 @@ soft_restart(unsigned long addr)
void void
do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{ {
char cmd; ulong addr;
ulong addr, val;
ulong corepll;
#ifdef CFG_RESET_ADDRESS #ifdef CFG_RESET_ADDRESS
addr = CFG_RESET_ADDRESS; addr = CFG_RESET_ADDRESS;
@ -181,86 +182,7 @@ do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
#else /* CONFIG_MPC8641HPCN */ #else /* CONFIG_MPC8641HPCN */
if (argc > 1) { mpc8641_reset_board(cmdtp, flag, argc, argv);
cmd = argv[1][1];
switch(cmd) {
case 'f': /* reset with frequency changed */
if (argc < 5)
goto my_usage;
read_from_px_regs(0);
val = set_px_sysclk(simple_strtoul(argv[2],NULL,10));
corepll = strfractoint(argv[3]);
val = val + set_px_corepll(corepll);
val = val + set_px_mpxpll(simple_strtoul(argv[4],
NULL, 10));
if (val == 3) {
printf("Setting registers VCFGEN0 and VCTL\n");
read_from_px_regs(1);
printf("Resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL ....\n");
set_px_go();
} else
goto my_usage;
while (1); /* Not reached */
case 'l':
if (argv[2][1] == 'f') {
read_from_px_regs(0);
read_from_px_regs_altbank(0);
/* reset with frequency changed */
val = set_px_sysclk(simple_strtoul(argv[3],NULL,10));
corepll = strfractoint(argv[4]);
val = val + set_px_corepll(corepll);
val = val + set_px_mpxpll(simple_strtoul(argv[5],NULL,10));
if (val == 3) {
printf("Setting registers VCFGEN0, VCFGEN1, VBOOT, and VCTL\n");
set_altbank();
read_from_px_regs(1);
read_from_px_regs_altbank(1);
printf("Enabling watchdog timer on the FPGA and resetting board with values from VSPEED0, VSPEED1, VCLKH, and VCLKL to boot from the other bank ....\n");
set_px_go_with_watchdog();
} else
goto my_usage;
while(1); /* Not reached */
} else if(argv[2][1] == 'd'){
/* Reset from next bank without changing frequencies but with watchdog timer enabled */
read_from_px_regs(0);
read_from_px_regs_altbank(0);
printf("Setting registers VCFGEN1, VBOOT, and VCTL\n");
set_altbank();
read_from_px_regs_altbank(1);
printf("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n");
set_px_go_with_watchdog();
while(1); /* Not reached */
} else {
/* Reset from next bank without changing frequency and without watchdog timer enabled */
read_from_px_regs(0);
read_from_px_regs_altbank(0);
if(argc > 2)
goto my_usage;
printf("Setting registers VCFGNE1, VBOOT, and VCTL\n");
set_altbank();
read_from_px_regs_altbank(1);
printf("Resetting board to boot from the other bank....\n");
set_px_go();
}
default:
goto my_usage;
}
my_usage:
printf("\nUsage: reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n");
printf(" reset altbank [cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>]\n");
printf("For example: reset cf 40 2.5 10\n");
printf("See MPC8641HPCN Design Workbook for valid values of command line parameters.\n");
return;
} else
out8(PIXIS_BASE+PIXIS_RST,0);
#endif /* !CONFIG_MPC8641HPCN */ #endif /* !CONFIG_MPC8641HPCN */