Merge branch 'master' of git://git.denx.de/u-boot-nand-flash

* 'master' of git://git.denx.de/u-boot-nand-flash:
  PPC: Fix socrates NAND problem
  PPC: Fix fsl_upm.c by renaming nand handling functions
  NAND: Make page, erase, oob size available via cmd_nand
  mtd: eLBC NAND: remove elbc_fcm_ctrl->oob_poi
  NAND: Add -y option to nand scrub command
  NAND: Add nand read.raw and write.raw commands
  NAND: Really ignore bad blocks when scrubbing
  spl, nand: add 4bit HW ecc oob first nand_read_page function
  mxc_nand: fix a problem writing more than 32MB
  mxc_nand: fixed some typos (cosmetic)
  nand: increase chip_delay in mv kirkwood nand driver
This commit is contained in:
Wolfgang Denk 2011-10-04 22:20:25 +02:00
commit 4f7549d2dc
11 changed files with 184 additions and 124 deletions

View File

@ -29,13 +29,13 @@
#include <asm/io.h>
static int state;
static void nand_write_byte(struct mtd_info *mtd, u_char byte);
static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
static u_char nand_read_byte(struct mtd_info *mtd);
static u16 nand_read_word(struct mtd_info *mtd);
static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
static int nand_device_ready(struct mtd_info *mtdinfo);
static void sc_nand_write_byte(struct mtd_info *mtd, u_char byte);
static void sc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
static u_char sc_nand_read_byte(struct mtd_info *mtd);
static u16 sc_nand_read_word(struct mtd_info *mtd);
static void sc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
static int sc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
static int sc_nand_device_ready(struct mtd_info *mtdinfo);
#define FPGA_NAND_CMD_MASK (0x7 << 28)
#define FPGA_NAND_CMD_COMMAND (0x0 << 28)
@ -47,22 +47,22 @@ static int nand_device_ready(struct mtd_info *mtdinfo);
#define FPGA_NAND_DATA_SHIFT 16
/**
* nand_write_byte - write one byte to the chip
* sc_nand_write_byte - write one byte to the chip
* @mtd: MTD device structure
* @byte: pointer to data byte to write
*/
static void nand_write_byte(struct mtd_info *mtd, u_char byte)
static void sc_nand_write_byte(struct mtd_info *mtd, u_char byte)
{
nand_write_buf(mtd, (const uchar *)&byte, sizeof(byte));
sc_nand_write_buf(mtd, (const uchar *)&byte, sizeof(byte));
}
/**
* nand_write_buf - write buffer to chip
* sc_nand_write_buf - write buffer to chip
* @mtd: MTD device structure
* @buf: data buffer
* @len: number of bytes to write
*/
static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
static void sc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
struct nand_chip *this = mtd->priv;
@ -75,34 +75,34 @@ static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
/**
* nand_read_byte - read one byte from the chip
* sc_nand_read_byte - read one byte from the chip
* @mtd: MTD device structure
*/
static u_char nand_read_byte(struct mtd_info *mtd)
static u_char sc_nand_read_byte(struct mtd_info *mtd)
{
u8 byte;
nand_read_buf(mtd, (uchar *)&byte, sizeof(byte));
sc_nand_read_buf(mtd, (uchar *)&byte, sizeof(byte));
return byte;
}
/**
* nand_read_word - read one word from the chip
* sc_nand_read_word - read one word from the chip
* @mtd: MTD device structure
*/
static u16 nand_read_word(struct mtd_info *mtd)
static u16 sc_nand_read_word(struct mtd_info *mtd)
{
u16 word;
nand_read_buf(mtd, (uchar *)&word, sizeof(word));
sc_nand_read_buf(mtd, (uchar *)&word, sizeof(word));
return word;
}
/**
* nand_read_buf - read chip data into buffer
* sc_nand_read_buf - read chip data into buffer
* @mtd: MTD device structure
* @buf: buffer to store date
* @len: number of bytes to read
*/
static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
static void sc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
int i;
struct nand_chip *this = mtd->priv;
@ -117,27 +117,27 @@ static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
}
/**
* nand_verify_buf - Verify chip data against buffer
* sc_nand_verify_buf - Verify chip data against buffer
* @mtd: MTD device structure
* @buf: buffer containing the data to compare
* @len: number of bytes to compare
*/
static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
static int sc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
for (i = 0; i < len; i++) {
if (buf[i] != nand_read_byte(mtd));
if (buf[i] != sc_nand_read_byte(mtd));
return -EFAULT;
}
return 0;
}
/**
* nand_device_ready - Check the NAND device is ready for next command.
* sc_nand_device_ready - Check the NAND device is ready for next command.
* @mtd: MTD device structure
*/
static int nand_device_ready(struct mtd_info *mtdinfo)
static int sc_nand_device_ready(struct mtd_info *mtdinfo)
{
struct nand_chip *this = mtdinfo->priv;
@ -147,11 +147,11 @@ static int nand_device_ready(struct mtd_info *mtdinfo)
}
/**
* nand_hwcontrol - NAND control functions wrapper.
* sc_nand_hwcontrol - NAND control functions wrapper.
* @mtd: MTD device structure
* @cmd: Command
*/
static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
static void sc_nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
{
if (ctrl & NAND_CTRL_CHANGE) {
state &= ~(FPGA_NAND_CMD_MASK | FPGA_NAND_ENABLE);
@ -178,19 +178,19 @@ static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
}
if (cmd != NAND_CMD_NONE)
nand_write_byte(mtdinfo, cmd);
sc_nand_write_byte(mtdinfo, cmd);
}
int board_nand_init(struct nand_chip *nand)
{
nand->cmd_ctrl = nand_hwcontrol;
nand->cmd_ctrl = sc_nand_hwcontrol;
nand->ecc.mode = NAND_ECC_SOFT;
nand->dev_ready = nand_device_ready;
nand->read_byte = nand_read_byte;
nand->read_word = nand_read_word;
nand->write_buf = nand_write_buf;
nand->read_buf = nand_read_buf;
nand->verify_buf = nand_verify_buf;
nand->dev_ready = sc_nand_device_ready;
nand->read_byte = sc_nand_read_byte;
nand->read_word = sc_nand_read_word;
nand->write_buf = sc_nand_write_buf;
nand->read_buf = sc_nand_read_buf;
nand->verify_buf = sc_nand_verify_buf;
return 0;
}

View File

@ -362,15 +362,31 @@ usage:
#endif
static void nand_print_info(int idx)
static void nand_print_and_set_info(int idx)
{
nand_info_t *nand = &nand_info[idx];
struct nand_chip *chip = nand->priv;
const int bufsz = 32;
char buf[bufsz];
printf("Device %d: ", idx);
if (chip->numchips > 1)
printf("%dx ", chip->numchips);
printf("%s, sector size %u KiB\n",
nand->name, nand->erasesize >> 10);
printf(" Page size %8d b\n", nand->writesize);
printf(" OOB size %8d b\n", nand->oobsize);
printf(" Erase size %8d b\n", nand->erasesize);
/* Set geometry info */
sprintf(buf, "%x", nand->writesize);
setenv("nand_writesize", buf);
sprintf(buf, "%x", nand->oobsize);
setenv("nand_oobsize", buf);
sprintf(buf, "%x", nand->erasesize);
setenv("nand_erasesize", buf);
}
int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
@ -407,7 +423,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
putc('\n');
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) {
if (nand_info[i].name)
nand_print_info(i);
nand_print_and_set_info(i);
}
return 0;
}
@ -418,7 +434,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE)
puts("no devices available\n");
else
nand_print_info(dev);
nand_print_and_set_info(dev);
return 0;
}
@ -464,10 +480,21 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
nand_erase_options_t opts;
/* "clean" at index 2 means request to write cleanmarker */
int clean = argc > 2 && !strcmp("clean", argv[2]);
int o = clean ? 3 : 2;
int scrub_yes = argc > 2 && !strcmp("-y", argv[2]);
int o = (clean || scrub_yes) ? 3 : 2;
int scrub = !strncmp(cmd, "scrub", 5);
int spread = 0;
int args = 2;
const char *scrub_warn =
"Warning: "
"scrub option will erase all factory set bad blocks!\n"
" "
"There is no reliable way to recover them.\n"
" "
"Use this command only for testing purposes if you\n"
" "
"are sure of what you are doing!\n"
"\nReally scrub this NAND flash? <y/N>\n";
if (cmd[5] != 0) {
if (!strcmp(&cmd[5], ".spread")) {
@ -504,19 +531,12 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
opts.spread = spread;
if (scrub) {
puts("Warning: "
"scrub option will erase all factory set "
"bad blocks!\n"
" "
"There is no reliable way to recover them.\n"
" "
"Use this command only for testing purposes "
"if you\n"
" "
"are sure of what you are doing!\n"
"\nReally scrub this NAND flash? <y/N>\n");
if (!scrub_yes)
puts(scrub_warn);
if (getc() == 'y') {
if (scrub_yes)
opts.scrub = 1;
else if (getc() == 'y') {
puts("y");
if (getc() == '\r')
opts.scrub = 1;
@ -598,6 +618,22 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
.mode = MTD_OOB_RAW
};
if (read)
ret = nand->read_oob(nand, off, &ops);
else
ret = nand->write_oob(nand, off, &ops);
} else if (!strcmp(s, ".raw")) {
/* Raw access */
mtd_oob_ops_t ops = {
.datbuf = (u8 *)addr,
.oobbuf = ((u8 *)addr) + nand->writesize,
.len = nand->writesize,
.ooblen = nand->oobsize,
.mode = MTD_OOB_RAW
};
rwsize = nand->writesize + nand->oobsize;
if (read)
ret = nand->read_oob(nand, off, &ops);
else
@ -695,6 +731,9 @@ U_BOOT_CMD(
"nand write - addr off|partition size\n"
" read/write 'size' bytes starting at offset 'off'\n"
" to/from memory address 'addr', skipping bad blocks.\n"
"nand read.raw - addr off|partition\n"
"nand write.raw - addr off|partition\n"
" Use read.raw/write.raw to avoid ECC and access the page as-is.\n"
#ifdef CONFIG_CMD_NAND_TRIMFFS
"nand write.trimffs - addr off|partition size\n"
" write 'size' bytes starting at offset 'off' from memory address\n"
@ -714,7 +753,7 @@ U_BOOT_CMD(
"nand erase.chip [clean] - erase entire chip'\n"
"nand bad - show bad blocks\n"
"nand dump[.oob] off - dump page\n"
"nand scrub off size | scrub.part partition | scrub.chip\n"
"nand scrub [-y] off size | scrub.part partition | scrub.chip\n"
" really clean NAND erasing bad blocks (UNSAFE)\n"
"nand markbad off [...] - mark bad block(s) at offset (UNSAFE)\n"
"nand biterr off - make a bit error at offset (UNSAFE)"

View File

@ -94,6 +94,15 @@ Commands:
of data for one 512-byte page or 2 256-byte pages. There is no check
for bad blocks.
nand read.raw addr ofs|partition
Read page from `ofs' in NAND flash to `addr'. This reads the raw page,
so ECC is avoided and the OOB area is read as well.
nand write.raw addr ofs|partition
Write page from `addr' to `ofs' in NAND flash. This writes the raw page,
so ECC is avoided and the OOB area is written as well, making the whole
page written as-is.
Configuration Options:
CONFIG_CMD_NAND

View File

@ -85,7 +85,6 @@ struct fsl_elbc_ctrl {
unsigned int mdr; /* UPM/FCM Data Register value */
unsigned int use_mdr; /* Non zero if the MDR is to be set */
unsigned int oob; /* Non zero if operating on OOB data */
uint8_t *oob_poi; /* Place to write ECC after read back */
};
/* These map to the positions used by the FCM hardware ECC generator */
@ -436,7 +435,6 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
case NAND_CMD_PAGEPROG: {
int full_page;
vdbg("fsl_elbc_cmdfunc: NAND_CMD_PAGEPROG "
"writing %d bytes.\n", ctrl->index);
@ -445,34 +443,13 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
* write so the HW generates the ECC.
*/
if (ctrl->oob || ctrl->column != 0 ||
ctrl->index != mtd->writesize + mtd->oobsize) {
ctrl->index != mtd->writesize + mtd->oobsize)
out_be32(&lbc->fbcr, ctrl->index);
full_page = 0;
} else {
else
out_be32(&lbc->fbcr, 0);
full_page = 1;
}
fsl_elbc_run_command(mtd);
/* Read back the page in order to fill in the ECC for the
* caller. Is this really needed?
*/
if (full_page && ctrl->oob_poi) {
out_be32(&lbc->fbcr, 3);
set_addr(mtd, 6, page_addr, 1);
ctrl->read_bytes = mtd->writesize + 9;
fsl_elbc_do_read(chip, 1);
fsl_elbc_run_command(mtd);
memcpy_fromio(ctrl->oob_poi + 6,
&ctrl->addr[ctrl->index], 3);
ctrl->index += 3;
}
ctrl->oob_poi = NULL;
return;
}
@ -680,13 +657,8 @@ static void fsl_elbc_write_page(struct mtd_info *mtd,
struct nand_chip *chip,
const uint8_t *buf)
{
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
fsl_elbc_write_buf(mtd, buf, mtd->writesize);
fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
ctrl->oob_poi = chip->oob_poi;
}
static struct fsl_elbc_ctrl *elbc_ctrl;

View File

@ -124,14 +124,14 @@ static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
fun_wait(fun);
}
static u8 nand_read_byte(struct mtd_info *mtd)
static u8 upm_nand_read_byte(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
return in_8(chip->IO_ADDR_R);
}
static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
static void upm_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
struct nand_chip *chip = mtd->priv;
@ -147,7 +147,7 @@ static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
fun_wait(fun);
}
static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
static void upm_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
int i;
struct nand_chip *chip = mtd->priv;
@ -156,7 +156,7 @@ static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
buf[i] = in_8(chip->IO_ADDR_R);
}
static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
static int upm_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
struct nand_chip *chip = mtd->priv;
@ -191,10 +191,10 @@ int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
#if CONFIG_SYS_NAND_MAX_CHIPS > 1
chip->select_chip = fun_select_chip;
#endif
chip->read_byte = nand_read_byte;
chip->read_buf = nand_read_buf;
chip->write_buf = nand_write_buf;
chip->verify_buf = nand_verify_buf;
chip->read_byte = upm_nand_read_byte;
chip->read_buf = upm_nand_read_buf;
chip->write_buf = upm_nand_write_buf;
chip->verify_buf = upm_nand_verify_buf;
if (fun->dev_ready)
chip->dev_ready = nand_dev_ready;

View File

@ -76,7 +76,7 @@ int board_nand_init(struct nand_chip *nand)
nand->options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING;
nand->ecc.mode = NAND_ECC_SOFT;
nand->cmd_ctrl = kw_nand_hwcontrol;
nand->chip_delay = 30;
nand->chip_delay = 40;
nand->select_chip = kw_nand_select_chip;
return 0;
}

View File

@ -350,7 +350,7 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr)
}
/*
* This function requests the NANDFC to initate the transfer
* This function requests the NANDFC to initiate the transfer
* of data currently in the NANDFC RAM buffer to the NAND device.
*/
static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
@ -394,7 +394,7 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
}
/*
* Requests NANDFC to initated the transfer of data from the
* Requests NANDFC to initiate the transfer of data from the
* NAND device into in the NANDFC ram buffer.
*/
static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
@ -637,7 +637,7 @@ static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
MTDDEBUG(MTD_DEBUG_LEVEL1, "Reading page %u to buf %p oob %p\n",
host->page_addr, buf, oob);
/* first read out the data area and the available portion of OOB */
/* first read the data area and the available portion of OOB */
for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
int stat;
@ -1179,7 +1179,7 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command,
/*
* before sending SEQIN command for partial write,
* we need read one page out. FSL NFC does not support
* partial write. It alway send out 512+ecc+512+ecc ...
* partial write. It always sends out 512+ecc+512+ecc
* for large page nand flash. But for small page nand
* flash, it does support SPARE ONLY operation.
*/
@ -1209,7 +1209,7 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command,
send_prog_page(host, 0, host->spare_only);
if (host->pagesize_2k && !is_mxc_nfc_11()) {
/* data in 4 areas datas */
/* data in 4 areas */
send_prog_page(host, 1, host->spare_only);
send_prog_page(host, 2, host->spare_only);
send_prog_page(host, 3, host->spare_only);
@ -1225,10 +1225,9 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command,
if (column != -1) {
/*
* MXC NANDFC can only perform full page+spare or
* spare-only read/write. When the upper layers
* layers perform a read/write buf operation,
* we will used the saved column adress to index into
* the full page.
* spare-only read/write. When the upper layers perform
* a read/write buffer operation, we will use the saved
* column address to index into the full page.
*/
send_addr(host, 0);
if (host->pagesize_2k)
@ -1372,12 +1371,23 @@ int board_nand_init(struct nand_chip *this)
/* Blocks to be unlocked */
writew(0x0, &host->regs->nfc_unlockstart_blkaddr);
writew(0x4000, &host->regs->nfc_unlockend_blkaddr);
/* Originally (Freescale LTIB 2.6.21) 0x4000 was written to the
* unlockend_blkaddr, but the magic 0x4000 does not always work
* when writing more than some 32 megabytes (on 2k page nands)
* However 0xFFFF doesn't seem to have this kind
* of limitation (tried it back and forth several times).
* The linux kernel driver sets this to 0xFFFF for the v2 controller
* only, but probably this was not tested there for v1.
* The very same limitation seems to apply to this kernel driver.
* This might be NAND chip specific and the i.MX31 datasheet is
* extremely vague about the semantics of this register.
*/
writew(0xFFFF, &host->regs->nfc_unlockend_blkaddr);
/* Unlock Block Command for given address range */
writew(0x4, &host->regs->nfc_wrprot);
/* NAND bus width determines access funtions used by upper layer */
/* NAND bus width determines access functions used by upper layer */
if (is_16bit_nand())
this->options |= NAND_BUSWIDTH_16;

View File

@ -2224,7 +2224,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
/*
* heck if we have a bad block, we do not erase bad blocks !
*/
if (nand_block_checkbad(mtd, ((loff_t) page) <<
if (!instr->scrub && nand_block_checkbad(mtd, ((loff_t) page) <<
chip->page_shift, 0, allowbbt)) {
printk(KERN_WARNING "nand_erase: attempt to erase a "
"bad block at page 0x%08x\n", page);

View File

@ -57,12 +57,6 @@ typedef struct mtd_info mtd_info_t;
#define cpu_to_je16(x) (x)
#define cpu_to_je32(x) (x)
/*****************************************************************************/
static int nand_block_bad_scrub(struct mtd_info *mtd, loff_t ofs, int getchip)
{
return 0;
}
/**
* nand_erase_opts: - erase NAND flash with support for various options
* (jffs2 formating)
@ -82,7 +76,6 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
int bbtest = 1;
int result;
int percent_complete = -1;
int (*nand_block_bad_old)(struct mtd_info *, loff_t, int) = NULL;
const char *mtd_device = meminfo->name;
struct mtd_oob_ops oob_opts;
struct nand_chip *chip = meminfo->priv;
@ -110,17 +103,15 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
* and disable bad block table while erasing.
*/
if (opts->scrub) {
struct nand_chip *priv_nand = meminfo->priv;
nand_block_bad_old = priv_nand->block_bad;
priv_nand->block_bad = nand_block_bad_scrub;
/* we don't need the bad block table anymore...
erase.scrub = opts->scrub;
/*
* We don't need the bad block table anymore...
* after scrub, there are no bad blocks left!
*/
if (priv_nand->bbt) {
kfree(priv_nand->bbt);
if (chip->bbt) {
kfree(chip->bbt);
}
priv_nand->bbt = NULL;
chip->bbt = NULL;
}
for (erased_length = 0;
@ -204,12 +195,8 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
if (!opts->quiet)
printf("\n");
if (nand_block_bad_old) {
struct nand_chip *priv_nand = meminfo->priv;
priv_nand->block_bad = nand_block_bad_old;
priv_nand->scan_bbt(meminfo);
}
if (opts->scrub)
chip->scan_bbt(meminfo);
return 0;
}

View File

@ -55,6 +55,7 @@ struct erase_info {
u_long priv;
u_char state;
struct erase_info *next;
int scrub;
};
struct mtd_erase_region_info {

View File

@ -135,6 +135,47 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block)
return 0;
}
#if defined(CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST)
static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
{
struct nand_chip *this = mtd->priv;
u_char *ecc_calc;
u_char *ecc_code;
u_char *oob_data;
int i;
int eccsize = CONFIG_SYS_NAND_ECCSIZE;
int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
int eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
uint8_t *p = dst;
int stat;
/*
* No malloc available for now, just use some temporary locations
* in SDRAM
*/
ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000);
ecc_code = ecc_calc + 0x100;
oob_data = ecc_calc + 0x200;
nand_command(mtd, block, page, 0, NAND_CMD_READOOB);
this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
nand_command(mtd, block, page, 0, NAND_CMD_READ0);
/* Pick the ECC bytes out of the oob data */
for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++)
ecc_code[i] = oob_data[nand_ecc_pos[i]];
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
this->ecc.hwctl(mtd, NAND_ECC_READ);
this->read_buf(mtd, p, eccsize);
this->ecc.calculate(mtd, p, &ecc_calc[i]);
stat = this->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
}
return 0;
}
#else
static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
{
struct nand_chip *this = mtd->priv;
@ -181,6 +222,7 @@ static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
return 0;
}
#endif /* #if defined(CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST) */
static int nand_load(struct mtd_info *mtd, unsigned int offs,
unsigned int uboot_size, uchar *dst)