sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

nand: Freescale Integrated Flash Controller NAND support 

Add NAND support (including spl) on IFC, such as is found on the p1010.

Note that using hardware ECC on IFC with small-page NAND (which is what
comes on the p1010rdb reference board) means there will be insufficient
OOB space for JFFS2, since IFC does not support 1-bit ECC.  UBI should
work, as it does not use OOB for anything but ECC.

When hardware ECC is not enabled in CSOR, software ECC is now used.

Signed-off-by: Dipen Dudhat <Dipen.Dudhat@freescale.com>
[scottwood@freescale.com: ECC rework and misc fixes]
Signed-off-by: Scott Wood <scottwood@freescale.com>
This commit is contained in:
Dipen Dudhat 2011-03-22 09:27:39 +05:30 committed by Kumar Gala
parent 49249e137d
commit 52f90dad60
6 changed files with 1149 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
View File

@ -21,10 +21,12 @@
*/
#include <common.h>
#include <asm/fsl_ifc.h>
#include <asm/io.h>
void cpu_init_f(void)
{
#ifdef CONFIG_FSL_LBC
fsl_lbc_t *lbc = LBC_BASE_ADDR;
/*
@ -39,6 +41,14 @@ void cpu_init_f(void)
#else
#error CONFIG_SYS_NAND_BR_PRELIM, CONFIG_SYS_NAND_OR_PRELIM must be defined
#endif
#endif
#ifdef CONFIG_FSL_IFC
#if defined(CONFIG_SYS_CSPR0) && defined(CONFIG_SYS_CSOR0)
set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0);
set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0);
set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0);
#endif
#endif
#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;

18
arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
View File

@ -23,6 +23,8 @@
* MA 02111-1307 USA
*/
#include "config.h" /* CONFIG_BOARDDIR */
OUTPUT_ARCH(powerpc)
SECTIONS
{
@ -52,8 +54,18 @@ SECTIONS
. = ALIGN(8);
__init_begin = .;
__init_end = .;
.resetvec ADDR(.text) + 0xffc : {
#if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */
.bootpg ADDR(.text) + 0x1000 :
{
start.o (.bootpg)
}
#define RESET_VECTOR_OFFSET 0x1ffc /* IFC has 8K sram */
#elif defined(CONFIG_FSL_ELBC)
#define RESET_VECTOR_OFFSET 0xffc /* LBC has 4k sram */
#else
#error unknown NAND controller
#endif
.resetvec ADDR(.text) + RESET_VECTOR_OFFSET : {
KEEP(*(.resetvec))
} = 0xffff
@ -64,4 +76,4 @@ SECTIONS
}
__bss_end__ = .;
}
ASSERT(__init_end <= 0xfff00ffc, "NAND bootstrap too big");
ASSERT(__init_end <= (0xfff00000 + RESET_VECTOR_OFFSET), "NAND bootstrap too big");

6
arch/powerpc/include/asm/fsl_ifc.h
View File

@ -69,6 +69,7 @@
*/
/* Enable ECC Encoder */
#define CSOR_NAND_ECC_ENC_EN 0x80000000
#define CSOR_NAND_ECC_MODE_MASK 0x30000000
/* 4 bit correction per 520 Byte sector */
#define CSOR_NAND_ECC_MODE_4 0x00000000
/* 8 bit correction per 528 Byte sector */
@ -857,10 +858,7 @@ struct fsl_ifc_nand {
u32 res19[0x10];
u32 nand_fsr;
u32 res20;
u32 nand_eccstat0;
u32 nand_eccstat1;
u32 nand_eccstat2;
u32 nand_eccstat3;
u32 nand_eccstat[4];
u32 res21[0x20];
u32 nanndcr;
u32 res22[0x2];

1
drivers/mtd/nand/Makefile
View File

@ -37,6 +37,7 @@ COBJS-$(CONFIG_NAND_ATMEL) += atmel_nand.o
COBJS-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o
COBJS-$(CONFIG_NAND_DAVINCI) += davinci_nand.o
COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
COBJS-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o
COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
COBJS-$(CONFIG_NAND_KB9202) += kb9202_nand.o
COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o

850
drivers/mtd/nand/fsl_ifc_nand.c Normal file
View File

@ -0,0 +1,850 @@
/* Integrated Flash Controller NAND Machine Driver
*
* Copyright (c) 2011 Freescale Semiconductor, Inc
*
* Authors: Dipen Dudhat <Dipen.Dudhat@freescale.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <common.h>
#include <malloc.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/fsl_ifc.h>
#define MAX_BANKS 4
#define ERR_BYTE 0xFF /* Value returned for read bytes
when read failed */
#define IFC_TIMEOUT_MSECS 10 /* Maximum number of mSecs to wait for IFC
NAND Machine */
struct fsl_ifc_ctrl;
/* mtd information per set */
struct fsl_ifc_mtd {
struct mtd_info mtd;
struct nand_chip chip;
struct fsl_ifc_ctrl *ctrl;
struct device *dev;
int bank; /* Chip select bank number */
unsigned int bufnum_mask; /* bufnum = page & bufnum_mask */
u8 __iomem *vbase; /* Chip select base virtual address */
};
/* overview of the fsl ifc controller */
struct fsl_ifc_ctrl {
struct nand_hw_control controller;
struct fsl_ifc_mtd *chips[MAX_BANKS];
/* device info */
struct fsl_ifc *regs;
uint8_t __iomem *addr; /* Address of assigned IFC buffer */
unsigned int cs_nand; /* On which chipsel NAND is connected */
unsigned int page; /* Last page written to / read from */
unsigned int read_bytes; /* Number of bytes read during command */
unsigned int column; /* Saved column from SEQIN */
unsigned int index; /* Pointer to next byte to 'read' */
unsigned int status; /* status read from NEESR after last op */
unsigned int oob; /* Non zero if operating on OOB data */
unsigned int eccread; /* Non zero for a full-page ECC read */
};
static struct fsl_ifc_ctrl *ifc_ctrl;
/* 512-byte page with 4-bit ECC, 8-bit */
static struct nand_ecclayout oob_512_8bit_ecc4 = {
.eccbytes = 8,
.eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
.oobfree = { {0, 5}, {6, 2} },
};
/* 512-byte page with 4-bit ECC, 16-bit */
static struct nand_ecclayout oob_512_16bit_ecc4 = {
.eccbytes = 8,
.eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
.oobfree = { {2, 6}, },
};
/* 2048-byte page size with 4-bit ECC */
static struct nand_ecclayout oob_2048_ecc4 = {
.eccbytes = 32,
.eccpos = {
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
32, 33, 34, 35, 36, 37, 38, 39,
},
.oobfree = { {2, 6}, {40, 24} },
};
/* 4096-byte page size with 4-bit ECC */
static struct nand_ecclayout oob_4096_ecc4 = {
.eccbytes = 64,
.eccpos = {
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47,
48, 49, 50, 51, 52, 53, 54, 55,
56, 57, 58, 59, 60, 61, 62, 63,
64, 65, 66, 67, 68, 69, 70, 71,
},
.oobfree = { {2, 6}, {72, 56} },
};
/* 4096-byte page size with 8-bit ECC -- requires 218-byte OOB */
static struct nand_ecclayout oob_4096_ecc8 = {
.eccbytes = 128,
.eccpos = {
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47,
48, 49, 50, 51, 52, 53, 54, 55,
56, 57, 58, 59, 60, 61, 62, 63,
64, 65, 66, 67, 68, 69, 70, 71,
72, 73, 74, 75, 76, 77, 78, 79,
80, 81, 82, 83, 84, 85, 86, 87,
88, 89, 90, 91, 92, 93, 94, 95,
96, 97, 98, 99, 100, 101, 102, 103,
104, 105, 106, 107, 108, 109, 110, 111,
112, 113, 114, 115, 116, 117, 118, 119,
120, 121, 122, 123, 124, 125, 126, 127,
128, 129, 130, 131, 132, 133, 134, 135,
},
.oobfree = { {2, 6}, {136, 82} },
};
/*
* Generic flash bbt descriptors
*/
static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
static struct nand_bbt_descr bbt_main_descr = {
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
NAND_BBT_2BIT | NAND_BBT_VERSION,
.offs = 2, /* 0 on 8-bit small page */
.len = 4,
.veroffs = 6,
.maxblocks = 4,
.pattern = bbt_pattern,
};
static struct nand_bbt_descr bbt_mirror_descr = {
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
NAND_BBT_2BIT | NAND_BBT_VERSION,
.offs = 2, /* 0 on 8-bit small page */
.len = 4,
.veroffs = 6,
.maxblocks = 4,
.pattern = mirror_pattern,
};
/*
* Set up the IFC hardware block and page address fields, and the ifc nand
* structure addr field to point to the correct IFC buffer in memory
*/
static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
{
struct nand_chip *chip = mtd->priv;
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
struct fsl_ifc *ifc = ctrl->regs;
int buf_num;
ctrl->page = page_addr;
/* Program ROW0/COL0 */
out_be32(&ifc->ifc_nand.row0, page_addr);
out_be32(&ifc->ifc_nand.col0, (oob ? IFC_NAND_COL_MS : 0) | column);
buf_num = page_addr & priv->bufnum_mask;
ctrl->addr = priv->vbase + buf_num * (mtd->writesize * 2);
ctrl->index = column;
/* for OOB data point to the second half of the buffer */
if (oob)
ctrl->index += mtd->writesize;
}
static int is_blank(struct mtd_info *mtd, struct fsl_ifc_ctrl *ctrl,
unsigned int bufnum)
{
struct nand_chip *chip = mtd->priv;
struct fsl_ifc_mtd *priv = chip->priv;
u8 __iomem *addr = priv->vbase + bufnum * (mtd->writesize * 2);
u32 __iomem *main = (u32 *)addr;
u8 __iomem *oob = addr + mtd->writesize;
int i;
for (i = 0; i < mtd->writesize / 4; i++) {
if (__raw_readl(&main[i]) != 0xffffffff)
return 0;
}
for (i = 0; i < chip->ecc.layout->eccbytes; i++) {
int pos = chip->ecc.layout->eccpos[i];
if (__raw_readb(&oob[pos]) != 0xff)
return 0;
}
return 1;
}
/* returns nonzero if entire page is blank */
static int check_read_ecc(struct mtd_info *mtd, struct fsl_ifc_ctrl *ctrl,
u32 *eccstat, unsigned int bufnum)
{
u32 reg = eccstat[bufnum / 4];
int errors = (reg >> ((3 - bufnum % 4) * 8)) & 15;
if (errors == 15) { /* uncorrectable */
/* Blank pages fail hw ECC checks */
if (is_blank(mtd, ctrl, bufnum))
return 1;
/*
* We disable ECCER reporting in hardware due to
* erratum IFC-A002770 -- so report it now if we
* see an uncorrectable error in ECCSTAT.
*/
ctrl->status |= IFC_NAND_EVTER_STAT_ECCER;
} else if (errors > 0) {
mtd->ecc_stats.corrected += errors;
}
return 0;
}
/*
* execute IFC NAND command and wait for it to complete
*/
static int fsl_ifc_run_command(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
struct fsl_ifc *ifc = ctrl->regs;
long long end_tick;
u32 eccstat[4];
int i;
/* set the chip select for NAND Transaction */
out_be32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
/* start read/write seq */
out_be32(&ifc->ifc_nand.nandseq_strt,
IFC_NAND_SEQ_STRT_FIR_STRT);
/* wait for NAND Machine complete flag or timeout */
end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks();
while (end_tick > get_ticks()) {
ctrl->status = in_be32(&ifc->ifc_nand.nand_evter_stat);
if (ctrl->status & IFC_NAND_EVTER_STAT_OPC)
break;
}
out_be32(&ifc->ifc_nand.nand_evter_stat, ctrl->status);
if (ctrl->status & IFC_NAND_EVTER_STAT_FTOER)
printf("%s: Flash Time Out Error\n", __func__);
if (ctrl->status & IFC_NAND_EVTER_STAT_WPER)
printf("%s: Write Protect Error\n", __func__);
if (ctrl->eccread) {
int bufperpage = mtd->writesize / 512;
int bufnum = (ctrl->page & priv->bufnum_mask) * bufperpage;
int bufnum_end = bufnum + bufperpage - 1;
for (i = bufnum / 4; i <= bufnum_end / 4; i++)
eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]);
for (i = bufnum; i <= bufnum_end; i++) {
if (check_read_ecc(mtd, ctrl, eccstat, i))
break;
}
ctrl->eccread = 0;
}
/* returns 0 on success otherwise non-zero) */
return ctrl->status == IFC_NAND_EVTER_STAT_OPC ? 0 : -EIO;
}
static void fsl_ifc_do_read(struct nand_chip *chip,
int oob,
struct mtd_info *mtd)
{
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
struct fsl_ifc *ifc = ctrl->regs;
/* Program FIR/IFC_NAND_FCR0 for Small/Large page */
if (mtd->writesize > 512) {
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
(IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
(IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT));
out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
out_be32(&ifc->ifc_nand.nand_fcr0,
(NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
(NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
} else {
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
(IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT));
if (oob)
out_be32(&ifc->ifc_nand.nand_fcr0,
NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT);
else
out_be32(&ifc->ifc_nand.nand_fcr0,
NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
}
}
/* cmdfunc send commands to the IFC NAND Machine */
static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
int column, int page_addr)
{
struct nand_chip *chip = mtd->priv;
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
struct fsl_ifc *ifc = ctrl->regs;
/* clear the read buffer */
ctrl->read_bytes = 0;
if (command != NAND_CMD_PAGEPROG)
ctrl->index = 0;
switch (command) {
/* READ0 read the entire buffer to use hardware ECC. */
case NAND_CMD_READ0: {
out_be32(&ifc->ifc_nand.nand_fbcr, 0);
set_addr(mtd, 0, page_addr, 0);
ctrl->read_bytes = mtd->writesize + mtd->oobsize;
ctrl->index += column;
if (chip->ecc.mode == NAND_ECC_HW)
ctrl->eccread = 1;
fsl_ifc_do_read(chip, 0, mtd);
fsl_ifc_run_command(mtd);
return;
}
/* READOOB reads only the OOB because no ECC is performed. */
case NAND_CMD_READOOB:
out_be32(&ifc->ifc_nand.nand_fbcr, mtd->oobsize - column);
set_addr(mtd, column, page_addr, 1);
ctrl->read_bytes = mtd->writesize + mtd->oobsize;
fsl_ifc_do_read(chip, 1, mtd);
fsl_ifc_run_command(mtd);
return;
/* READID must read all possible bytes while CEB is active */
case NAND_CMD_READID:
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
(IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
out_be32(&ifc->ifc_nand.nand_fcr0,
NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT);
/* 4 bytes for manuf, device and exts */
out_be32(&ifc->ifc_nand.nand_fbcr, 4);
ctrl->read_bytes = 4;
set_addr(mtd, 0, 0, 0);
fsl_ifc_run_command(mtd);
return;
/* ERASE1 stores the block and page address */
case NAND_CMD_ERASE1:
set_addr(mtd, 0, page_addr, 0);
return;
/* ERASE2 uses the block and page address from ERASE1 */
case NAND_CMD_ERASE2:
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) |
(IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT));
out_be32(&ifc->ifc_nand.nand_fcr0,
(NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) |
(NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT));
out_be32(&ifc->ifc_nand.nand_fbcr, 0);
ctrl->read_bytes = 0;
fsl_ifc_run_command(mtd);
return;
/* SEQIN sets up the addr buffer and all registers except the length */
case NAND_CMD_SEQIN: {
u32 nand_fcr0;
ctrl->column = column;
ctrl->oob = 0;
if (mtd->writesize > 512) {
nand_fcr0 =
(NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) |
(NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT);
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
(IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) |
(IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT));
out_be32(&ifc->ifc_nand.nand_fir1, 0);
} else {
nand_fcr0 = ((NAND_CMD_PAGEPROG <<
IFC_NAND_FCR0_CMD1_SHIFT) |
(NAND_CMD_SEQIN <<
IFC_NAND_FCR0_CMD2_SHIFT));
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) |
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) |
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
(IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT));
out_be32(&ifc->ifc_nand.nand_fir1,
(IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT));
if (column >= mtd->writesize) {
/* OOB area --> READOOB */
column -= mtd->writesize;
nand_fcr0 |= NAND_CMD_READOOB <<
IFC_NAND_FCR0_CMD0_SHIFT;
ctrl->oob = 1;
} else if (column < 256) {
/* First 256 bytes --> READ0 */
nand_fcr0 |= NAND_CMD_READ0 << FCR_CMD0_SHIFT;
} else {
/* Second 256 bytes --> READ1 */
nand_fcr0 |= NAND_CMD_READ1 << FCR_CMD0_SHIFT;
}
}
out_be32(&ifc->ifc_nand.nand_fcr0, nand_fcr0);
set_addr(mtd, column, page_addr, ctrl->oob);
return;
}
/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
case NAND_CMD_PAGEPROG:
if (ctrl->oob)
out_be32(&ifc->ifc_nand.nand_fbcr, ctrl->index);
else
out_be32(&ifc->ifc_nand.nand_fbcr, 0);
fsl_ifc_run_command(mtd);
return;
case NAND_CMD_STATUS:
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT));
out_be32(&ifc->ifc_nand.nand_fcr0,
NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT);
out_be32(&ifc->ifc_nand.nand_fbcr, 1);
set_addr(mtd, 0, 0, 0);
ctrl->read_bytes = 1;
fsl_ifc_run_command(mtd);
/* Chip sometimes reporting write protect even when it's not */
out_8(ctrl->addr, in_8(ctrl->addr) | NAND_STATUS_WP);
return;
case NAND_CMD_RESET:
out_be32(&ifc->ifc_nand.nand_fir0,
IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT);
out_be32(&ifc->ifc_nand.nand_fcr0,
NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT);
fsl_ifc_run_command(mtd);
return;
default:
printf("%s: error, unsupported command 0x%x.\n",
__func__, command);
}
}
/*
* Write buf to the IFC NAND Controller Data Buffer
*/
static void fsl_ifc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
unsigned int bufsize = mtd->writesize + mtd->oobsize;
if (len <= 0) {
printf("%s of %d bytes", __func__, len);
ctrl->status = 0;
return;
}
if ((unsigned int)len > bufsize - ctrl->index) {
printf("%s beyond end of buffer "
"(%d requested, %u available)\n",
__func__, len, bufsize - ctrl->index);
len = bufsize - ctrl->index;
}
memcpy_toio(&ctrl->addr[ctrl->index], buf, len);
ctrl->index += len;
}
/*
* read a byte from either the IFC hardware buffer if it has any data left
* otherwise issue a command to read a single byte.
*/
static u8 fsl_ifc_read_byte(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
/* If there are still bytes in the IFC buffer, then use the
* next byte. */
if (ctrl->index < ctrl->read_bytes)
return in_8(&ctrl->addr[ctrl->index++]);
printf("%s beyond end of buffer\n", __func__);
return ERR_BYTE;
}
/*
* Read two bytes from the IFC hardware buffer
* read function for 16-bit buswith
*/
static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
uint16_t data;
/*
* If there are still bytes in the IFC buffer, then use the
* next byte.
*/
if (ctrl->index < ctrl->read_bytes) {
data = in_be16((uint16_t *)&ctrl->
addr[ctrl->index]);
ctrl->index += 2;
return (uint8_t)data;
}
printf("%s beyond end of buffer\n", __func__);
return ERR_BYTE;
}
/*
* Read from the IFC Controller Data Buffer
*/
static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
{
struct nand_chip *chip = mtd->priv;
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
int avail;
if (len < 0)
return;
avail = min((unsigned int)len, ctrl->read_bytes - ctrl->index);
memcpy_fromio(buf, &ctrl->addr[ctrl->index], avail);
ctrl->index += avail;
if (len > avail)
printf("%s beyond end of buffer "
"(%d requested, %d available)\n",
__func__, len, avail);
}
/*
* Verify buffer against the IFC Controller Data Buffer
*/
static int fsl_ifc_verify_buf(struct mtd_info *mtd,
const u_char *buf, int len)
{
struct nand_chip *chip = mtd->priv;
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
int i;
if (len < 0) {
printf("%s of %d bytes", __func__, len);
return -EINVAL;
}
if ((unsigned int)len > ctrl->read_bytes - ctrl->index) {
printf("%s beyond end of buffer "
"(%d requested, %u available)\n",
__func__, len, ctrl->read_bytes - ctrl->index);
ctrl->index = ctrl->read_bytes;
return -EINVAL;
}
for (i = 0; i < len; i++)
if (in_8(&ctrl->addr[ctrl->index + i]) != buf[i])
break;
ctrl->index += len;
return i == len && ctrl->status == IFC_NAND_EVTER_STAT_OPC ? 0 : -EIO;
}
/* This function is called after Program and Erase Operations to
* check for success or failure.
*/
static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
struct fsl_ifc *ifc = ctrl->regs;
u32 nand_fsr;
if (ctrl->status != IFC_NAND_EVTER_STAT_OPC)
return NAND_STATUS_FAIL;
/* Use READ_STATUS command, but wait for the device to be ready */
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT));
out_be32(&ifc->ifc_nand.nand_fcr0, NAND_CMD_STATUS <<
IFC_NAND_FCR0_CMD0_SHIFT);
out_be32(&ifc->ifc_nand.nand_fbcr, 1);
set_addr(mtd, 0, 0, 0);
ctrl->read_bytes = 1;
fsl_ifc_run_command(mtd);
if (ctrl->status != IFC_NAND_EVTER_STAT_OPC)
return NAND_STATUS_FAIL;
nand_fsr = in_be32(&ifc->ifc_nand.nand_fsr);
/* Chip sometimes reporting write protect even when it's not */
nand_fsr = nand_fsr | NAND_STATUS_WP;
return nand_fsr;
}
static int fsl_ifc_read_page(struct mtd_info *mtd,
struct nand_chip *chip,
uint8_t *buf, int page)
{
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
fsl_ifc_read_buf(mtd, buf, mtd->writesize);
fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
if (ctrl->status != IFC_NAND_EVTER_STAT_OPC)
mtd->ecc_stats.failed++;
return 0;
}
/* ECC will be calculated automatically, and errors will be detected in
* waitfunc.
*/
static void fsl_ifc_write_page(struct mtd_info *mtd,
struct nand_chip *chip,
const uint8_t *buf)
{
fsl_ifc_write_buf(mtd, buf, mtd->writesize);
fsl_ifc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
}
static void fsl_ifc_ctrl_init(void)
{
ifc_ctrl = kzalloc(sizeof(*ifc_ctrl), GFP_KERNEL);
if (!ifc_ctrl)
return;
ifc_ctrl->regs = IFC_BASE_ADDR;
/* clear event registers */
out_be32(&ifc_ctrl->regs->ifc_nand.nand_evter_stat, ~0U);
out_be32(&ifc_ctrl->regs->ifc_nand.pgrdcmpl_evt_stat, ~0U);
/* Enable error and event for any detected errors */
out_be32(&ifc_ctrl->regs->ifc_nand.nand_evter_en,
IFC_NAND_EVTER_EN_OPC_EN |
IFC_NAND_EVTER_EN_PGRDCMPL_EN |
IFC_NAND_EVTER_EN_FTOER_EN |
IFC_NAND_EVTER_EN_WPER_EN);
out_be32(&ifc_ctrl->regs->ifc_nand.ncfgr, 0x0);
}
static void fsl_ifc_select_chip(struct mtd_info *mtd, int chip)
{
}
int board_nand_init(struct nand_chip *nand)
{
struct fsl_ifc_mtd *priv;
struct nand_ecclayout *layout;
uint32_t cspr = 0, csor = 0;
if (!ifc_ctrl) {
fsl_ifc_ctrl_init();
if (!ifc_ctrl)
return -1;
}
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->ctrl = ifc_ctrl;
priv->vbase = nand->IO_ADDR_R;
/* Find which chip select it is connected to.
*/
for (priv->bank = 0; priv->bank < MAX_BANKS; priv->bank++) {
phys_addr_t base_addr = virt_to_phys(nand->IO_ADDR_R);
cspr = in_be32(&ifc_ctrl->regs->cspr_cs[priv->bank].cspr);
csor = in_be32(&ifc_ctrl->regs->csor_cs[priv->bank].csor);
if ((cspr & CSPR_V) && (cspr & CSPR_MSEL) == CSPR_MSEL_NAND &&
(cspr & CSPR_BA) == CSPR_PHYS_ADDR(base_addr)) {
ifc_ctrl->cs_nand = priv->bank << IFC_NAND_CSEL_SHIFT;
break;
}
}
if (priv->bank >= MAX_BANKS) {
printf("%s: address did not match any "
"chip selects\n", __func__);
return -ENODEV;
}
ifc_ctrl->chips[priv->bank] = priv;
/* fill in nand_chip structure */
/* set up function call table */
nand->write_buf = fsl_ifc_write_buf;
nand->read_buf = fsl_ifc_read_buf;
nand->verify_buf = fsl_ifc_verify_buf;
nand->select_chip = fsl_ifc_select_chip;
nand->cmdfunc = fsl_ifc_cmdfunc;
nand->waitfunc = fsl_ifc_wait;
/* set up nand options */
nand->bbt_td = &bbt_main_descr;
nand->bbt_md = &bbt_mirror_descr;
/* set up nand options */
nand->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
NAND_USE_FLASH_BBT;
if (cspr & CSPR_PORT_SIZE_16) {
nand->read_byte = fsl_ifc_read_byte16;
nand->options |= NAND_BUSWIDTH_16;
} else {
nand->read_byte = fsl_ifc_read_byte;
}
nand->controller = &ifc_ctrl->controller;
nand->priv = priv;
nand->ecc.read_page = fsl_ifc_read_page;
nand->ecc.write_page = fsl_ifc_write_page;
/* Hardware generates ECC per 512 Bytes */
nand->ecc.size = 512;
nand->ecc.bytes = 8;
switch (csor & CSOR_NAND_PGS_MASK) {
case CSOR_NAND_PGS_512:
if (nand->options & NAND_BUSWIDTH_16) {
layout = &oob_512_16bit_ecc4;
} else {
layout = &oob_512_8bit_ecc4;
/* Avoid conflict with bad block marker */
bbt_main_descr.offs = 0;
bbt_mirror_descr.offs = 0;
}
priv->bufnum_mask = 15;
break;
case CSOR_NAND_PGS_2K:
layout = &oob_2048_ecc4;
priv->bufnum_mask = 3;
break;
case CSOR_NAND_PGS_4K:
if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
CSOR_NAND_ECC_MODE_4) {
layout = &oob_4096_ecc4;
} else {
layout = &oob_4096_ecc8;
nand->ecc.bytes = 16;
}
priv->bufnum_mask = 1;
break;
default:
printf("ifc nand: bad csor %#x: bad page size\n", csor);
return -ENODEV;
}
/* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
if (csor & CSOR_NAND_ECC_DEC_EN) {
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.layout = layout;
} else {
nand->ecc.mode = NAND_ECC_SOFT;
}
return 0;
}

271
nand_spl/nand_boot_fsl_ifc.c Normal file
View File

@ -0,0 +1,271 @@
/*
* NAND boot for FSL Integrated Flash Controller, NAND Flash Control Machine
*
* Copyright 2011 Freescale Semiconductor, Inc.
* Author: Dipen Dudhat <dipen.dudhat@freescale.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/fsl_ifc.h>
#include <linux/mtd/nand.h>
static inline int is_blank(uchar *addr, int page_size)
{
int i;
for (i = 0; i < page_size; i++) {
if (__raw_readb(&addr[i]) != 0xff)
return 0;
}
/*
* For the SPL, don't worry about uncorrectable errors
* where the main area is all FFs but shouldn't be.
*/
return 1;
}
/* returns nonzero if entire page is blank */
static inline int check_read_ecc(uchar *buf, u32 *eccstat,
unsigned int bufnum, int page_size)
{
u32 reg = eccstat[bufnum / 4];
int errors = (reg >> ((3 - bufnum % 4) * 8)) & 15;
if (errors == 15) { /* uncorrectable */
/* Blank pages fail hw ECC checks */
if (is_blank(buf, page_size))
return 1;
puts("ecc error\n");
for (;;)
;
}
return 0;
}
static inline void nand_wait(uchar *buf, int bufnum, int page_size)
{
struct fsl_ifc *ifc = IFC_BASE_ADDR;
u32 status;
u32 eccstat[4];
int bufperpage = page_size / 512;
int bufnum_end, i;
bufnum *= bufperpage;
bufnum_end = bufnum + bufperpage - 1;
do {
status = in_be32(&ifc->ifc_nand.nand_evter_stat);
} while (!(status & IFC_NAND_EVTER_STAT_OPC));
if (status & IFC_NAND_EVTER_STAT_FTOER) {
puts("flash time out error\n");
for (;;)
;
}
for (i = bufnum / 4; i <= bufnum_end / 4; i++)
eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]);
for (i = bufnum; i <= bufnum_end; i++) {
if (check_read_ecc(buf, eccstat, i, page_size))
break;
}
out_be32(&ifc->ifc_nand.nand_evter_stat, status);
}
static inline int bad_block(uchar *marker, int port_size)
{
if (port_size == 8)
return __raw_readb(marker) != 0xff;
else
return __raw_readw((u16 *)marker) != 0xffff;
}
static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
{
struct fsl_ifc *ifc = IFC_BASE_ADDR;
uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
int page_size;
int port_size;
int pages_per_blk;
int blk_size;
int bad_marker = 0;
int bufnum_mask, bufnum;
int csor, cspr;
int pos = 0;
int j = 0;
int sram_addr;
int pg_no;
/* Get NAND Flash configuration */
csor = CONFIG_SYS_NAND_CSOR;
cspr = CONFIG_SYS_NAND_CSPR;
if (!(csor & CSOR_NAND_ECC_DEC_EN)) {
/* soft ECC in SPL is unimplemented */
puts("WARNING: soft ECC not checked in SPL\n");
} else {
u32 hwcsor;
/* make sure board is configured with ECC on boot */
hwcsor = in_be32(&ifc->csor_cs[0].csor);
if (!(hwcsor & CSOR_NAND_ECC_DEC_EN))
puts("WARNING: ECC not checked in SPL, "
"check board cfg\n");
}
port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8;
if (csor & CSOR_NAND_PGS_4K) {
page_size = 4096;
bufnum_mask = 1;
} else if (csor & CSOR_NAND_PGS_2K) {
page_size = 2048;
bufnum_mask = 3;
} else {
page_size = 512;
bufnum_mask = 15;
if (port_size == 8)
bad_marker = 5;
}
pages_per_blk =
32 << ((csor & CSOR_NAND_PB_MASK) >> CSOR_NAND_PB_SHIFT);
blk_size = pages_per_blk * page_size;
/* Open Full SRAM mapping for spare are access */
out_be32(&ifc->ifc_nand.ncfgr, 0x0);
/* Clear Boot events */
out_be32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff);
/* Program FIR/FCR for Large/Small page */
if (page_size > 512) {
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
(IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
(IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT));
out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
out_be32(&ifc->ifc_nand.nand_fcr0,
(NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
(NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
} else {
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
(IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT));
out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
out_be32(&ifc->ifc_nand.nand_fcr0,
NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
}
/* Program FBCR = 0 for full page read */
out_be32(&ifc->ifc_nand.nand_fbcr, 0);
/* Read and copy u-boot on SDRAM from NAND device, In parallel
* check for Bad block if found skip it and read continue to
* next Block
*/
while (pos < uboot_size) {
int i = 0;
do {
pg_no = offs / page_size;
bufnum = pg_no & bufnum_mask;
sram_addr = bufnum * page_size * 2;
out_be32(&ifc->ifc_nand.row0, pg_no);
out_be32(&ifc->ifc_nand.col0, 0);
/* start read */
out_be32(&ifc->ifc_nand.nandseq_strt,
IFC_NAND_SEQ_STRT_FIR_STRT);
/* wait for read to complete */
nand_wait(&buf[sram_addr], bufnum, page_size);
/*
* If either of the first two pages are marked bad,
* continue to the next block.
*/
if (i++ < 2 &&
bad_block(&buf[sram_addr + page_size + bad_marker],
port_size)) {
puts("skipping\n");
offs = (offs + blk_size) & ~(blk_size - 1);
pos &= ~(blk_size - 1);
break;
}
for (j = 0; j < page_size; j++)
dst[pos + j] = __raw_readb(&buf[sram_addr + j]);
pos += page_size;
offs += page_size;
} while ((offs & (blk_size - 1)) && (pos < uboot_size));
}
}
/*
* Main entrypoint for NAND Boot. It's necessary that SDRAM is already
* configured and available since this code loads the main U-boot image
* from NAND into SDRAM and starts from there.
*/
void nand_boot(void)
{
__attribute__((noreturn)) void (*uboot)(void);
/*
* Load U-Boot image from NAND into RAM
*/
nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
(uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
#ifdef CONFIG_NAND_ENV_DST
nand_load(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_NAND_ENV_DST);
#ifdef CONFIG_ENV_OFFSET_REDUND
nand_load(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
(uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
#endif
#endif
/*
* Jump to U-Boot image
*/
/*
* Clean d-cache and invalidate i-cache, to
* make sure that no stale data is executed.
*/
flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
uboot();
}