Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'

Conflicts:
	tools/Makefile
This commit is contained in:
Albert ARIBAUD 2013-09-11 09:59:27 +02:00
commit 5480ac3217
20 changed files with 766 additions and 45 deletions

View File

@ -464,6 +464,10 @@ Andre Schwarz <andre.schwarz@matrix-vision.de>
mvblm7 MPC8343
mvsmr MPC5200
Inderpal Singh <inderpal.singh@linaro.org>
Arndale ARM ARMV7 (EXYNOS5250 SoC)
Jon Smirl <jonsmirl@gmail.com>
pcm030 MPC5200

View File

@ -866,7 +866,7 @@ clean:
$(obj)tools/gdb/{astest,gdbcont,gdbsend} \
$(obj)tools/gen_eth_addr $(obj)tools/img2srec \
$(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \
$(obj)tools/mk{smdk5250,}spl \
$(obj)tools/mk{$(BOARD),}spl \
$(obj)tools/mxsboot \
$(obj)tools/ncb $(obj)tools/ubsha1 \
$(obj)tools/kernel-doc/docproc \

View File

@ -290,10 +290,19 @@ static inline unsigned int s5p_gpio_part_max(int nr)
return EXYNOS5_GPIO_PART2_MAX;
} else if (cpu_is_exynos4()) {
if (nr < EXYNOS4_GPIO_PART1_MAX)
return 0;
else
return EXYNOS4_GPIO_PART1_MAX;
if (proid_is_exynos4412()) {
if (nr < EXYNOS4X12_GPIO_PART1_MAX)
return 0;
else if (nr < EXYNOS4X12_GPIO_PART2_MAX)
return EXYNOS4X12_GPIO_PART1_MAX;
else
return EXYNOS4X12_GPIO_PART2_MAX;
} else {
if (nr < EXYNOS4_GPIO_PART1_MAX)
return 0;
else
return EXYNOS4_GPIO_PART1_MAX;
}
}
return 0;

View File

@ -8,6 +8,8 @@
#ifndef __ASM_ARCH_MMC_H_
#define __ASM_ARCH_MMC_H_
#define S5P_MMC_DEV_OFFSET 0x10000
#define SDHCI_CONTROL2 0x80
#define SDHCI_CONTROL3 0x84
#define SDHCI_CONTROL4 0x8C
@ -55,7 +57,9 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width);
static inline unsigned int s5p_mmc_init(int index, int bus_width)
{
unsigned int base = samsung_get_base_mmc() + (0x10000 * index);
unsigned int base = samsung_get_base_mmc() +
(S5P_MMC_DEV_OFFSET * index);
return s5p_sdhci_init(base, index, bus_width);
}
#endif

View File

@ -8,6 +8,8 @@
#ifndef __ASM_ARCH_MMC_H_
#define __ASM_ARCH_MMC_H_
#define S5P_MMC_DEV_OFFSET 0x100000
#define SDHCI_CONTROL2 0x80
#define SDHCI_CONTROL3 0x84
#define SDHCI_CONTROL4 0x8C
@ -55,7 +57,9 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width);
static inline unsigned int s5p_mmc_init(int index, int bus_width)
{
unsigned int base = samsung_get_base_mmc() + (0x10000 * index);
unsigned int base = samsung_get_base_mmc() +
(S5P_MMC_DEV_OFFSET * index);
return s5p_sdhci_init(base, index, bus_width);
}
#endif

View File

@ -0,0 +1,34 @@
#
# Copyright (C) 2013 Samsung Electronics
#
# SPDX-License-Identifier: GPL-2.0+
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
COBJS += arndale_spl.o
ifndef CONFIG_SPL_BUILD
COBJS += arndale.o
endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
ALL := $(obj).depend $(LIB)
all: $(ALL)
$(LIB): $(OBJS)
$(call cmd_link_o_target, $(OBJS))
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

View File

@ -0,0 +1,101 @@
/*
* Copyright (C) 2013 Samsung Electronics
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/dwmmc.h>
#include <asm/arch/power.h>
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
return 0;
}
int dram_init(void)
{
int i;
u32 addr;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE);
}
return 0;
}
int power_init_board(void)
{
set_ps_hold_ctrl();
return 0;
}
void dram_init_banksize(void)
{
int i;
u32 addr, size;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
size = get_ram_size((long *)addr, SDRAM_BANK_SIZE);
gd->bd->bi_dram[i].start = addr;
gd->bd->bi_dram[i].size = size;
}
}
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
int ret;
/* dwmmc initializattion for available channels */
ret = exynos_dwmmc_init(gd->fdt_blob);
if (ret)
debug("dwmmc init failed\n");
return ret;
}
#endif
static int board_uart_init(void)
{
int err = 0, uart_id;
for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) {
err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE);
if (err) {
debug("UART%d not configured\n",
(uart_id - PERIPH_ID_UART0));
return err;
}
}
return err;
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
int err;
err = board_uart_init();
if (err) {
debug("UART init failed\n");
return err;
}
return err;
}
#endif
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
printf("\nBoard: Arndale\n");
return 0;
}
#endif

View File

@ -0,0 +1,50 @@
/*
* Copyright (c) 2012 The Chromium OS Authors.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/spl.h>
#define SIGNATURE 0xdeadbeef
/* Parameters of early board initialization in SPL */
static struct spl_machine_param machine_param
__attribute__((section(".machine_param"))) = {
.signature = SIGNATURE,
.version = 1,
.params = "vmubfasirM",
.size = sizeof(machine_param),
.mem_iv_size = 0x1f,
.mem_type = DDR_MODE_DDR3,
/*
* Set uboot_size to 0x100000 bytes.
*
* This is an overly conservative value chosen to accommodate all
* possible U-Boot image. You are advised to set this value to a
* smaller realistic size via scripts that modifies the .machine_param
* section of output U-Boot image.
*/
.uboot_size = 0x100000,
.boot_source = BOOT_MODE_OM,
.frequency_mhz = 800,
.arm_freq_mhz = 1000,
.serial_base = 0x12c30000,
.i2c_base = 0x12c60000,
.mem_manuf = MEM_MANUF_SAMSUNG,
};
struct spl_machine_param *spl_get_machine_params(void)
{
if (machine_param.signature != SIGNATURE) {
/* Will hang if SIGNATURE dont match */
while (1)
;
}
return &machine_param;
}

View File

@ -0,0 +1,39 @@
/*
* SAMSUNG Arndale board device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
#include "exynos5250.dtsi"
/ {
model = "SAMSUNG Arndale board based on EXYNOS5250";
compatible = "samsung,arndale", "samsung,exynos5250";
aliases {
serial0 = "/serial@12C20000";
console = "/serial@12C20000";
};
mmc@12200000 {
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
};
mmc@12210000 {
status = "disabled";
};
mmc@12220000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
};
mmc@12230000 {
status = "disabled";
};
};

View File

@ -1,18 +0,0 @@
#
# Copyright (C) 2010 Samsung Electronics
# Kyungmin Park <kyungmin.park@samsung.com>
#
# SPDX-License-Identifier: GPL-2.0+
#
# On S5PC100 we use the 128 MiB OneDRAM bank at
#
# 0x30000000 to 0x35000000 (80MiB)
# 0x38000000 to 0x40000000 (128MiB)
#
# On S5PC110 we use the 128 MiB OneDRAM bank at
#
# 0x30000000 to 0x35000000 (80MiB)
# 0x40000000 to 0x50000000 (256MiB)
#
CONFIG_SYS_TEXT_BASE = 0x34800000

View File

@ -72,7 +72,7 @@ int checkboard(void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
int i;
int i, ret, ret_sd = 0;
/* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */
s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1);
@ -95,7 +95,36 @@ int board_mmc_init(bd_t *bis)
s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X);
}
return s5p_mmc_init(0, 4);
ret = s5p_mmc_init(0, 4);
if (ret)
error("MMC: Failed to init MMC:0.\n");
/*
* SD card (T_FLASH) detect and init
* T_FLASH_DETECT: EINT28: GPH3[4] input mode
*/
s5p_gpio_cfg_pin(&s5pc110_gpio->h3, 4, GPIO_INPUT);
s5p_gpio_set_pull(&s5pc110_gpio->h3, 4, GPIO_PULL_UP);
if (!s5p_gpio_get_value(&s5pc110_gpio->h3, 4)) {
for (i = 0; i < 7; i++) {
if (i == 2)
continue;
/* GPG2[0:6] special function 2 */
s5p_gpio_cfg_pin(&s5pc110_gpio->g2, i, 0x2);
/* GPG2[0:6] pull disable */
s5p_gpio_set_pull(&s5pc110_gpio->g2, i, GPIO_PULL_NONE);
/* GPG2[0:6] drv 4x */
s5p_gpio_set_drv(&s5pc110_gpio->g2, i, GPIO_DRV_4X);
}
ret_sd = s5p_mmc_init(2, 4);
if (ret_sd)
error("MMC: Failed to init SD card (MMC:2).\n");
}
return ret & ret_sd;
}
#endif

View File

@ -1,16 +0,0 @@
#
# Copyright (C) 2008 # Samsung Elecgtronics
# Kyungmin Park <kyungmin.park@samsung.com>
#
# On S5PC100 we use the 128 MiB OneDRAM bank at
#
# 0x30000000 to 0x35000000 (80MiB)
# 0x38000000 to 0x40000000 (128MiB)
#
# On S5PC110 we use the 128 MiB OneDRAM bank at
#
# 0x30000000 to 0x35000000 (80MiB)
# 0x40000000 to 0x48000000 (128MiB)
#
CONFIG_SYS_TEXT_BASE = 0x34800000

View File

@ -327,6 +327,7 @@ omap5_uevm arm armv7 omap5_uevm ti oma
dra7xx_evm arm armv7 dra7xx ti omap5
s5p_goni arm armv7 goni samsung s5pc1xx
smdkc100 arm armv7 smdkc100 samsung s5pc1xx
arndale arm armv7 arndale samsung exynos
origen arm armv7 origen samsung exynos
s5pc210_universal arm armv7 universal_c210 samsung exynos
snow arm armv7 smdk5250 samsung exynos

View File

@ -14,6 +14,198 @@
DECLARE_GLOBAL_DATA_PTR;
static const char max77686_buck_addr[] = {
0xff, 0x10, 0x12, 0x1c, 0x26, 0x30, 0x32, 0x34, 0x36, 0x38
};
static unsigned int max77686_ldo_volt2hex(int ldo, ulong uV)
{
unsigned int hex = 0;
switch (ldo) {
case 1:
case 2:
case 6:
case 7:
case 8:
case 15:
hex = (uV - 800000) / 25000;
break;
default:
hex = (uV - 800000) / 50000;
}
if (hex >= 0 && hex <= MAX77686_LDO_VOLT_MAX_HEX)
return hex;
debug("%s: %ld is wrong voltage value for LDO%d\n", __func__, uV, ldo);
return 0;
}
int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV)
{
unsigned int val, ret, hex, adr;
if (ldo < 1 && ldo > 26) {
printf("%s: %d is wrong ldo number\n", __func__, ldo);
return -1;
}
adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1;
hex = max77686_ldo_volt2hex(ldo, uV);
if (!hex)
return -1;
ret = pmic_reg_read(p, adr, &val);
if (ret)
return ret;
val &= ~MAX77686_LDO_VOLT_MASK;
val |= hex;
ret |= pmic_reg_write(p, adr, val);
return ret;
}
int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode)
{
unsigned int val, ret, adr, mode;
if (ldo < 1 && 26 < ldo) {
printf("%s: %d is wrong ldo number\n", __func__, ldo);
return -1;
}
adr = MAX77686_REG_PMIC_LDO1CTRL1 + ldo - 1;
/* mode */
switch (opmode) {
case OPMODE_OFF:
mode = MAX77686_LDO_MODE_OFF;
break;
case OPMODE_STANDBY:
switch (ldo) {
case 2:
case 6:
case 7:
case 8:
case 10:
case 11:
case 12:
case 14:
case 15:
case 16:
mode = MAX77686_LDO_MODE_STANDBY;
break;
default:
mode = 0xff;
}
break;
case OPMODE_LPM:
mode = MAX77686_LDO_MODE_LPM;
break;
case OPMODE_ON:
mode = MAX77686_LDO_MODE_ON;
break;
default:
mode = 0xff;
}
if (mode == 0xff) {
printf("%s: %d is not supported on LDO%d\n",
__func__, opmode, ldo);
return -1;
}
ret = pmic_reg_read(p, adr, &val);
if (ret)
return ret;
val &= ~MAX77686_LDO_MODE_MASK;
val |= mode;
ret |= pmic_reg_write(p, adr, val);
return ret;
}
int max77686_set_buck_mode(struct pmic *p, int buck, char opmode)
{
unsigned int val, ret, mask, adr, size, mode, mode_shift;
size = ARRAY_SIZE(max77686_buck_addr);
if (buck >= size) {
printf("%s: %d is wrong buck number\n", __func__, buck);
return -1;
}
adr = max77686_buck_addr[buck];
/* mask */
switch (buck) {
case 2:
case 3:
case 4:
mode_shift = MAX77686_BUCK_MODE_SHIFT_2;
break;
default:
mode_shift = MAX77686_BUCK_MODE_SHIFT_1;
}
mask = MAX77686_BUCK_MODE_MASK << mode_shift;
/* mode */
switch (opmode) {
case OPMODE_OFF:
mode = MAX77686_BUCK_MODE_OFF;
break;
case OPMODE_STANDBY:
switch (buck) {
case 1:
case 2:
case 3:
case 4:
mode = MAX77686_BUCK_MODE_STANDBY << mode_shift;
break;
default:
mode = 0xff;
}
break;
case OPMODE_LPM:
switch (buck) {
case 2:
case 3:
case 4:
mode = MAX77686_BUCK_MODE_LPM << mode_shift;
break;
default:
mode = 0xff;
}
break;
case OPMODE_ON:
mode = MAX77686_BUCK_MODE_ON << mode_shift;
break;
default:
mode = 0xff;
}
if (mode == 0xff) {
printf("%s: %d is not supported on BUCK%d\n",
__func__, opmode, buck);
return -1;
}
ret = pmic_reg_read(p, adr, &val);
if (ret)
return ret;
val &= ~mask;
val |= mode;
ret |= pmic_reg_write(p, adr, val);
return ret;
}
int pmic_init(unsigned char bus)
{
static const char name[] = "MAX77686_PMIC";

255
include/configs/arndale.h Normal file
View File

@ -0,0 +1,255 @@
/*
* Copyright (C) 2013 Samsung Electronics
*
* SPDX-License-Identifier: GPL-2.0+
*
* Configuration settings for the SAMSUNG Arndale board.
*/
#ifndef __CONFIG_ARNDALE_H
#define __CONFIG_ARNDALE_H
/* High Level Configuration Options */
#define CONFIG_SAMSUNG /* in a SAMSUNG core */
#define CONFIG_S5P /* S5P Family */
#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */
#define CONFIG_EXYNOS5250
#include <asm/arch/cpu.h> /* get chip and board defs */
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Enable fdt support for Exynos5250 */
#define CONFIG_ARCH_DEVICE_TREE exynos5250
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
/* Allow tracing to be enabled */
#define CONFIG_TRACE
#define CONFIG_CMD_TRACE
#define CONFIG_TRACE_BUFFER_SIZE (16 << 20)
#define CONFIG_TRACE_EARLY_SIZE (8 << 20)
#define CONFIG_TRACE_EARLY
#define CONFIG_TRACE_EARLY_ADDR 0x50000000
/* Keep L2 Cache Disabled */
#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define CONFIG_SYS_TEXT_BASE 0x43E00000
/* input clock of PLL: SMDK5250 has 24MHz input clock */
#define CONFIG_SYS_CLK_FREQ 24000000
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
#define CONFIG_CMDLINE_EDITING
/* Power Down Modes */
#define S5P_CHECK_SLEEP 0x00000BAD
#define S5P_CHECK_DIDLE 0xBAD00000
#define S5P_CHECK_LPA 0xABAD0000
/* Offset for inform registers */
#define INFORM0_OFFSET 0x800
#define INFORM1_OFFSET 0x804
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
/* select serial console configuration */
#define CONFIG_BAUDRATE 115200
#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
#define CONFIG_SILENT_CONSOLE
/* Console configuration */
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define EXYNOS_DEVICE_SETTINGS \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
EXYNOS_DEVICE_SETTINGS
/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC
#define CONFIG_SDHCI
#define CONFIG_S5P_SDHCI
#define CONFIG_DWMMC
#define CONFIG_EXYNOS_DWMMC
#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_SKIP_LOWLEVEL_INIT
/* PWM */
#define CONFIG_PWM
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
/* Command definition*/
#include <config_cmd_default.h>
#define CONFIG_CMD_PING
#define CONFIG_CMD_ELF
#define CONFIG_CMD_MMC
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_NET
#define CONFIG_CMD_HASH
#define CONFIG_BOOTDELAY 3
#define CONFIG_ZERO_BOOTDELAY_CHECK
/* USB */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_EXYNOS
#define CONFIG_USB_STORAGE
/* MMC SPL */
#define CONFIG_SPL
#define COPY_BL2_FNPTR_ADDR 0x02020030
#define CONFIG_SPL_LIBCOMMON_SUPPORT
/* specific .lds file */
#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x02023400
#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
#define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000"
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT "ARNDALE # "
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
#define CONFIG_SYS_HZ 1000
#define CONFIG_RD_LVL
#define CONFIG_NR_DRAM_BANKS 8
#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE
#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE
#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE
#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE
#define CONFIG_SYS_MONITOR_BASE 0x00000000
/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH
#undef CONFIG_CMD_IMLS
#define CONFIG_IDENT_STRING " for ARNDALE"
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SECURE_BL1_ONLY
/* Secure FW size configuration */
#ifdef CONFIG_SECURE_BL1_ONLY
#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */
#else
#define CONFIG_SEC_FW_SIZE 0
#endif
/* Configuration of BL1, BL2, ENV Blocks on mmc */
#define CONFIG_RES_BLOCK_SIZE (512)
#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */
#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
/* U-boot copy size from boot Media to DRAM.*/
#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
#define CONFIG_SPI_BOOTING
#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
#define CONFIG_CMD_PART
#define CONFIG_PARTITION_UUIDS
#define CONFIG_IRAM_STACK 0x02050000
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK
/* I2C */
#define CONFIG_SYS_I2C_INIT_BOARD
#define CONFIG_HARD_I2C
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C_SPEED 100000 /* 100 Kbps */
#define CONFIG_DRIVER_S3C24X0_I2C
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_MAX_I2C_NUM 8
#define CONFIG_SYS_I2C_SLAVE 0x0
#define CONFIG_I2C_EDID
/* PMIC */
#define CONFIG_PMIC
#define CONFIG_PMIC_I2C
#define CONFIG_PMIC_MAX77686
#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-arndale
/* Ethernet Controllor Driver */
#ifdef CONFIG_CMD_NET
#define CONFIG_SMC911X
#define CONFIG_SMC911X_BASE 0x5000000
#define CONFIG_SMC911X_16_BIT
#define CONFIG_ENV_SROM_BANK 1
#endif /*CONFIG_CMD_NET*/
/* Enable PXE Support */
#ifdef CONFIG_CMD_NET
#define CONFIG_CMD_PXE
#define CONFIG_MENU
#endif
/* Enable devicetree support */
#define CONFIG_OF_LIBFDT
/* Enable Time Command */
#define CONFIG_CMD_TIME
#endif /* __CONFIG_H */

View File

@ -13,7 +13,7 @@
#define CONFIG_SAMSUNG /* in a SAMSUNG core */
#define CONFIG_S5P /* S5P Family */
#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */
#define CONFIG_SMDK5250 /* which is in a SMDK5250 */
#define CONFIG_EXYNOS5250
#include <asm/arch/cpu.h> /* get chip and board defs */

View File

@ -29,6 +29,9 @@
/* DRAM Base */
#define CONFIG_SYS_SDRAM_BASE 0x30000000
/* Text Base */
#define CONFIG_SYS_TEXT_BASE 0x34800000
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG

View File

@ -34,6 +34,9 @@
/* DRAM Base */
#define CONFIG_SYS_SDRAM_BASE 0x30000000
/* Text Base */
#define CONFIG_SYS_TEXT_BASE 0x34800000
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG

View File

@ -139,6 +139,32 @@ enum {
EN_LDO = (0x3 << 6),
};
enum {
OPMODE_OFF = 0,
OPMODE_STANDBY,
OPMODE_LPM,
OPMODE_ON,
};
int max77686_set_ldo_voltage(struct pmic *p, int ldo, ulong uV);
int max77686_set_ldo_mode(struct pmic *p, int ldo, char opmode);
int max77686_set_buck_mode(struct pmic *p, int buck, char opmode);
#define MAX77686_LDO_VOLT_MAX_HEX 0x3f
#define MAX77686_LDO_VOLT_MASK 0x3f
#define MAX77686_LDO_MODE_MASK 0xc0
#define MAX77686_LDO_MODE_OFF (0x00 << 0x06)
#define MAX77686_LDO_MODE_STANDBY (0x01 << 0x06)
#define MAX77686_LDO_MODE_LPM (0x02 << 0x06)
#define MAX77686_LDO_MODE_ON (0x03 << 0x06)
#define MAX77686_BUCK_MODE_MASK 0x03
#define MAX77686_BUCK_MODE_SHIFT_1 0x00
#define MAX77686_BUCK_MODE_SHIFT_2 0x04
#define MAX77686_BUCK_MODE_OFF 0x00
#define MAX77686_BUCK_MODE_STANDBY 0x01
#define MAX77686_BUCK_MODE_LPM 0x02
#define MAX77686_BUCK_MODE_ON 0x03
/* Buck1 1 volt value */
#define MAX77686_BUCK1OUT_1V 0x5
/* Buck1 1.05 volt value */

View File

@ -52,7 +52,7 @@ BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX)
BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX)
BIN_FILES-y += mkenvimage$(SFX)
BIN_FILES-y += mkimage$(SFX)
BIN_FILES-$(CONFIG_SMDK5250) += mksmdk5250spl$(SFX)
BIN_FILES-$(CONFIG_EXYNOS5250) += mk$(BOARD)spl$(SFX)
BIN_FILES-$(CONFIG_MX23) += mxsboot$(SFX)
BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX)
BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX)
@ -87,6 +87,7 @@ NOPED_OBJ_FILES-y += ublimage.o
OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += envcrc.o
OBJ_FILES-$(CONFIG_CMD_LOADS) += img2srec.o
OBJ_FILES-$(CONFIG_CMD_NET) += gen_eth_addr.o
OBJ_FILES-$(CONFIG_EXYNOS5250) += mkexynosspl.o
OBJ_FILES-$(CONFIG_KIRKWOOD) += kwboot.o
OBJ_FILES-$(CONFIG_LCD_LOGO) += bmp_logo.o
OBJ_FILES-$(CONFIG_MX23) += mxsboot.o