MX: Set a common gpio.h for all i.MX
Each i.MX has its own gpio.h, defining the same structure. The internal GPIO controller has the same layout (at least for the register used by u-boot) and can be shared. Signed-off-by: Stefano Babic <sbabic@denx.de> Tested-by: Matt Sealey <matt@genesi-usa.com>
This commit is contained in:
parent
c55068e5b8
commit
5fecb36ca0
|
@ -25,21 +25,6 @@
|
||||||
#ifndef __ASM_ARCH_MX25_GPIO_H
|
#ifndef __ASM_ARCH_MX25_GPIO_H
|
||||||
#define __ASM_ARCH_MX25_GPIO_H
|
#define __ASM_ARCH_MX25_GPIO_H
|
||||||
|
|
||||||
/* Converts a GPIO port number and the internal bit position
|
#include <asm/imx-common/gpio.h>
|
||||||
* to the GPIO number
|
|
||||||
*/
|
|
||||||
#define MXC_GPIO_PORT_TO_NUM(port, bit) (((port - 1) << 5) + (bit & 0x1f))
|
|
||||||
|
|
||||||
/* GPIO registers */
|
|
||||||
struct gpio_regs {
|
|
||||||
u32 gpio_dr; /* data */
|
|
||||||
u32 gpio_dir; /* direction */
|
|
||||||
u32 psr; /* pad satus */
|
|
||||||
u32 icr1; /* interrupt config 1 */
|
|
||||||
u32 icr2; /* interrupt config 2 */
|
|
||||||
u32 imr; /* interrupt mask */
|
|
||||||
u32 isr; /* interrupt status */
|
|
||||||
u32 edge_sel; /* edge select */
|
|
||||||
};
|
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
|
@ -25,11 +25,6 @@
|
||||||
#ifndef __ASM_ARCH_MX31_GPIO_H
|
#ifndef __ASM_ARCH_MX31_GPIO_H
|
||||||
#define __ASM_ARCH_MX31_GPIO_H
|
#define __ASM_ARCH_MX31_GPIO_H
|
||||||
|
|
||||||
/* GPIO Registers */
|
#include <asm/imx-common/gpio.h>
|
||||||
struct gpio_regs {
|
|
||||||
u32 gpio_dr;
|
|
||||||
u32 gpio_dir;
|
|
||||||
u32 gpio_psr;
|
|
||||||
};
|
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
|
@ -25,16 +25,6 @@
|
||||||
#ifndef __ASM_ARCH_MX35_GPIO_H
|
#ifndef __ASM_ARCH_MX35_GPIO_H
|
||||||
#define __ASM_ARCH_MX35_GPIO_H
|
#define __ASM_ARCH_MX35_GPIO_H
|
||||||
|
|
||||||
/* GPIO registers */
|
#include <asm/imx-common/gpio.h>
|
||||||
struct gpio_regs {
|
|
||||||
u32 gpio_dr; /* data */
|
|
||||||
u32 gpio_dir; /* direction */
|
|
||||||
u32 psr; /* pad satus */
|
|
||||||
u32 icr1; /* interrupt config 1 */
|
|
||||||
u32 icr2; /* interrupt config 2 */
|
|
||||||
u32 imr; /* interrupt mask */
|
|
||||||
u32 isr; /* interrupt status */
|
|
||||||
u32 edge_sel; /* edge select */
|
|
||||||
};
|
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
|
@ -25,11 +25,6 @@
|
||||||
#ifndef __ASM_ARCH_MX5_GPIO_H
|
#ifndef __ASM_ARCH_MX5_GPIO_H
|
||||||
#define __ASM_ARCH_MX5_GPIO_H
|
#define __ASM_ARCH_MX5_GPIO_H
|
||||||
|
|
||||||
/* GPIO registers */
|
#include <asm/imx-common/gpio.h>
|
||||||
struct gpio_regs {
|
|
||||||
u32 gpio_dr;
|
|
||||||
u32 gpio_dir;
|
|
||||||
u32 gpio_psr;
|
|
||||||
};
|
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
|
@ -25,11 +25,6 @@
|
||||||
#ifndef __ASM_ARCH_MX6_GPIO_H
|
#ifndef __ASM_ARCH_MX6_GPIO_H
|
||||||
#define __ASM_ARCH_MX6_GPIO_H
|
#define __ASM_ARCH_MX6_GPIO_H
|
||||||
|
|
||||||
/* GPIO registers */
|
#include <asm/imx-common/gpio.h>
|
||||||
struct gpio_regs {
|
|
||||||
u32 gpio_dr;
|
|
||||||
u32 gpio_dir;
|
|
||||||
u32 gpio_psr;
|
|
||||||
};
|
|
||||||
|
|
||||||
#endif /* __ASM_ARCH_MX6_GPIO_H */
|
#endif /* __ASM_ARCH_MX6_GPIO_H */
|
||||||
|
|
|
@ -172,8 +172,6 @@
|
||||||
#define IMX_IIM_BASE OCOTP_BASE_ADDR
|
#define IMX_IIM_BASE OCOTP_BASE_ADDR
|
||||||
#define FEC_QUIRK_ENET_MAC
|
#define FEC_QUIRK_ENET_MAC
|
||||||
|
|
||||||
#define GPIO_NUMBER(port, index) ((((port)-1)*32)+((index)&31))
|
|
||||||
|
|
||||||
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
|
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
|
||||||
#include <asm/types.h>
|
#include <asm/types.h>
|
||||||
|
|
||||||
|
|
|
@ -0,0 +1,39 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2011
|
||||||
|
* Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
#ifndef __ASM_ARCH_IMX_GPIO_H
|
||||||
|
#define __ASM_ARCH_IMX_GPIO_H
|
||||||
|
|
||||||
|
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
|
||||||
|
/* GPIO registers */
|
||||||
|
struct gpio_regs {
|
||||||
|
u32 gpio_dr; /* data */
|
||||||
|
u32 gpio_dir; /* direction */
|
||||||
|
u32 gpio_psr; /* pad satus */
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define IMX_GPIO_NR(port, index) ((((port)-1)*32)+((index)&31))
|
||||||
|
|
||||||
|
#endif
|
|
@ -87,12 +87,12 @@ struct i2c_pads_info i2c_pad_info0 = {
|
||||||
.scl = {
|
.scl = {
|
||||||
.i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
|
.i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
|
||||||
.gpio_mode = MX6Q_PAD_EIM_D21__GPIO_3_21 | PC,
|
.gpio_mode = MX6Q_PAD_EIM_D21__GPIO_3_21 | PC,
|
||||||
.gp = GPIO_NUMBER(3, 21)
|
.gp = IMX_GPIO_NR(3, 21)
|
||||||
},
|
},
|
||||||
.sda = {
|
.sda = {
|
||||||
.i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
|
.i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
|
||||||
.gpio_mode = MX6Q_PAD_EIM_D28__GPIO_3_28 | PC,
|
.gpio_mode = MX6Q_PAD_EIM_D28__GPIO_3_28 | PC,
|
||||||
.gp = GPIO_NUMBER(3, 28)
|
.gp = IMX_GPIO_NR(3, 28)
|
||||||
}
|
}
|
||||||
};
|
};
|
||||||
|
|
||||||
|
@ -101,12 +101,12 @@ struct i2c_pads_info i2c_pad_info1 = {
|
||||||
.scl = {
|
.scl = {
|
||||||
.i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
|
.i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
|
||||||
.gpio_mode = MX6Q_PAD_KEY_COL3__GPIO_4_12 | PC,
|
.gpio_mode = MX6Q_PAD_KEY_COL3__GPIO_4_12 | PC,
|
||||||
.gp = GPIO_NUMBER(4, 12)
|
.gp = IMX_GPIO_NR(4, 12)
|
||||||
},
|
},
|
||||||
.sda = {
|
.sda = {
|
||||||
.i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
|
.i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
|
||||||
.gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO_4_13 | PC,
|
.gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO_4_13 | PC,
|
||||||
.gp = GPIO_NUMBER(4, 13)
|
.gp = IMX_GPIO_NR(4, 13)
|
||||||
}
|
}
|
||||||
};
|
};
|
||||||
|
|
||||||
|
@ -115,12 +115,12 @@ struct i2c_pads_info i2c_pad_info2 = {
|
||||||
.scl = {
|
.scl = {
|
||||||
.i2c_mode = MX6Q_PAD_GPIO_5__I2C3_SCL | PC,
|
.i2c_mode = MX6Q_PAD_GPIO_5__I2C3_SCL | PC,
|
||||||
.gpio_mode = MX6Q_PAD_GPIO_5__GPIO_1_5 | PC,
|
.gpio_mode = MX6Q_PAD_GPIO_5__GPIO_1_5 | PC,
|
||||||
.gp = GPIO_NUMBER(1, 5)
|
.gp = IMX_GPIO_NR(1, 5)
|
||||||
},
|
},
|
||||||
.sda = {
|
.sda = {
|
||||||
.i2c_mode = MX6Q_PAD_GPIO_16__I2C3_SDA | PC,
|
.i2c_mode = MX6Q_PAD_GPIO_16__I2C3_SDA | PC,
|
||||||
.gpio_mode = MX6Q_PAD_GPIO_16__GPIO_7_11 | PC,
|
.gpio_mode = MX6Q_PAD_GPIO_16__GPIO_7_11 | PC,
|
||||||
.gp = GPIO_NUMBER(7, 11)
|
.gp = IMX_GPIO_NR(7, 11)
|
||||||
}
|
}
|
||||||
};
|
};
|
||||||
|
|
||||||
|
@ -229,9 +229,9 @@ int board_ehci_hcd_init(int port)
|
||||||
imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
|
imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
|
||||||
|
|
||||||
/* Reset USB hub */
|
/* Reset USB hub */
|
||||||
gpio_direction_output(GPIO_NUMBER(7, 12), 0);
|
gpio_direction_output(IMX_GPIO_NR(7, 12), 0);
|
||||||
mdelay(2);
|
mdelay(2);
|
||||||
gpio_set_value(GPIO_NUMBER(7, 12), 1);
|
gpio_set_value(IMX_GPIO_NR(7, 12), 1);
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
@ -413,12 +413,12 @@ struct button_key {
|
||||||
};
|
};
|
||||||
|
|
||||||
static struct button_key const buttons[] = {
|
static struct button_key const buttons[] = {
|
||||||
{"back", GPIO_NUMBER(2, 2), 'B'},
|
{"back", IMX_GPIO_NR(2, 2), 'B'},
|
||||||
{"home", GPIO_NUMBER(2, 4), 'H'},
|
{"home", IMX_GPIO_NR(2, 4), 'H'},
|
||||||
{"menu", GPIO_NUMBER(2, 1), 'M'},
|
{"menu", IMX_GPIO_NR(2, 1), 'M'},
|
||||||
{"search", GPIO_NUMBER(2, 3), 'S'},
|
{"search", IMX_GPIO_NR(2, 3), 'S'},
|
||||||
{"volup", GPIO_NUMBER(7, 13), 'V'},
|
{"volup", IMX_GPIO_NR(7, 13), 'V'},
|
||||||
{"voldown", GPIO_NUMBER(4, 5), 'v'},
|
{"voldown", IMX_GPIO_NR(4, 5), 'v'},
|
||||||
};
|
};
|
||||||
|
|
||||||
/*
|
/*
|
||||||
|
|
|
@ -34,8 +34,8 @@
|
||||||
DECLARE_GLOBAL_DATA_PTR;
|
DECLARE_GLOBAL_DATA_PTR;
|
||||||
|
|
||||||
#ifdef CONFIG_FEC_MXC
|
#ifdef CONFIG_FEC_MXC
|
||||||
#define GPIO_FEC_RESET_B MXC_GPIO_PORT_TO_NUM(4, 7)
|
#define GPIO_FEC_RESET_B IMX_GPIO_NR(4, 7)
|
||||||
#define GPIO_FEC_ENABLE_B MXC_GPIO_PORT_TO_NUM(4, 9)
|
#define GPIO_FEC_ENABLE_B IMX_GPIO_NR(4, 9)
|
||||||
void tx25_fec_init(void)
|
void tx25_fec_init(void)
|
||||||
{
|
{
|
||||||
struct iomuxc_mux_ctl *muxctl;
|
struct iomuxc_mux_ctl *muxctl;
|
||||||
|
@ -103,9 +103,9 @@ void tx25_fec_init(void)
|
||||||
/*
|
/*
|
||||||
* set each to 1 and make each an output
|
* set each to 1 and make each an output
|
||||||
*/
|
*/
|
||||||
gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 10), 1);
|
gpio_direction_output(IMX_GPIO_NR(3, 10), 1);
|
||||||
gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 11), 1);
|
gpio_direction_output(IMX_GPIO_NR(3, 11), 1);
|
||||||
gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 12), 1);
|
gpio_direction_output(IMX_GPIO_NR(3, 12), 1);
|
||||||
|
|
||||||
mdelay(22); /* this value came from RedBoot */
|
mdelay(22); /* this value came from RedBoot */
|
||||||
|
|
||||||
|
|
|
@ -56,7 +56,7 @@ int board_init()
|
||||||
|
|
||||||
/* Setup of core volatage selection pin to run at 1.4V */
|
/* Setup of core volatage selection pin to run at 1.4V */
|
||||||
writel(gpio_mux_mode5, &muxctl->pad_ext_armclk); /* VCORE GPIO3[15] */
|
writel(gpio_mux_mode5, &muxctl->pad_ext_armclk); /* VCORE GPIO3[15] */
|
||||||
gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 15), 1);
|
gpio_direction_output(IMX_GPIO_NR(3, 15), 1);
|
||||||
|
|
||||||
/* Setup of input daisy chains for SD card pins*/
|
/* Setup of input daisy chains for SD card pins*/
|
||||||
writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_cmd);
|
writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_cmd);
|
||||||
|
@ -68,10 +68,10 @@ int board_init()
|
||||||
|
|
||||||
/* Setup of digital output for USB power and OC */
|
/* Setup of digital output for USB power and OC */
|
||||||
writel(gpio_mux_mode5, &muxctl->pad_csi_d3); /* USB Power GPIO1[28] */
|
writel(gpio_mux_mode5, &muxctl->pad_csi_d3); /* USB Power GPIO1[28] */
|
||||||
gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 28), 1);
|
gpio_direction_output(IMX_GPIO_NR(1, 28), 1);
|
||||||
|
|
||||||
writel(gpio_mux_mode5, &muxctl->pad_csi_d2); /* USB OC GPIO1[27] */
|
writel(gpio_mux_mode5, &muxctl->pad_csi_d2); /* USB OC GPIO1[27] */
|
||||||
gpio_direction_input(MXC_GPIO_PORT_TO_NUM(1, 18));
|
gpio_direction_input(IMX_GPIO_NR(1, 18));
|
||||||
|
|
||||||
/* Setup of digital output control pins */
|
/* Setup of digital output control pins */
|
||||||
writel(gpio_mux_mode5, &muxctl->pad_csi_d8); /* Ouput 1 Ctrl GPIO1[7] */
|
writel(gpio_mux_mode5, &muxctl->pad_csi_d8); /* Ouput 1 Ctrl GPIO1[7] */
|
||||||
|
@ -83,21 +83,21 @@ int board_init()
|
||||||
writel(0, &padctl->pad_csi_d5); /* Ouput 2 Stat pull up off */
|
writel(0, &padctl->pad_csi_d5); /* Ouput 2 Stat pull up off */
|
||||||
|
|
||||||
/* Switch both output drivers off */
|
/* Switch both output drivers off */
|
||||||
gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 7), 0);
|
gpio_direction_output(IMX_GPIO_NR(1, 7), 0);
|
||||||
gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 6), 0);
|
gpio_direction_output(IMX_GPIO_NR(1, 6), 0);
|
||||||
|
|
||||||
/* Setup of key input pin GPIO2[29]*/
|
/* Setup of key input pin GPIO2[29]*/
|
||||||
writel(gpio_mux_mode5 | MX25_PIN_MUX_SION, &muxctl->pad_kpp_row0);
|
writel(gpio_mux_mode5 | MX25_PIN_MUX_SION, &muxctl->pad_kpp_row0);
|
||||||
writel(0, &padctl->pad_kpp_row0); /* Key pull up off */
|
writel(0, &padctl->pad_kpp_row0); /* Key pull up off */
|
||||||
gpio_direction_input(MXC_GPIO_PORT_TO_NUM(2, 29));
|
gpio_direction_input(IMX_GPIO_NR(2, 29));
|
||||||
|
|
||||||
/* Setup of status LED outputs */
|
/* Setup of status LED outputs */
|
||||||
writel(gpio_mux_mode5, &muxctl->pad_csi_d9); /* GPIO4[21] */
|
writel(gpio_mux_mode5, &muxctl->pad_csi_d9); /* GPIO4[21] */
|
||||||
writel(gpio_mux_mode5, &muxctl->pad_csi_d4); /* GPIO1[29] */
|
writel(gpio_mux_mode5, &muxctl->pad_csi_d4); /* GPIO1[29] */
|
||||||
|
|
||||||
/* Switch both LEDs off */
|
/* Switch both LEDs off */
|
||||||
gpio_direction_output(MXC_GPIO_PORT_TO_NUM(4, 21), 0);
|
gpio_direction_output(IMX_GPIO_NR(4, 21), 0);
|
||||||
gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 29), 0);
|
gpio_direction_output(IMX_GPIO_NR(1, 29), 0);
|
||||||
|
|
||||||
/* Setup of CAN1 and CAN2 signals */
|
/* Setup of CAN1 and CAN2 signals */
|
||||||
writel(gpio_mux_mode6, &muxctl->pad_gpio_a); /* CAN1 TX */
|
writel(gpio_mux_mode6, &muxctl->pad_gpio_a); /* CAN1 TX */
|
||||||
|
@ -148,12 +148,12 @@ int board_late_init(void)
|
||||||
writel(gpio_mux_mode2, &muxctl->pad_uart2_cts);
|
writel(gpio_mux_mode2, &muxctl->pad_uart2_cts);
|
||||||
|
|
||||||
/* assert PHY reset (low) */
|
/* assert PHY reset (low) */
|
||||||
gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 16), 0);
|
gpio_direction_output(IMX_GPIO_NR(3, 16), 0);
|
||||||
|
|
||||||
udelay(5000);
|
udelay(5000);
|
||||||
|
|
||||||
/* deassert PHY reset */
|
/* deassert PHY reset */
|
||||||
gpio_set_value(MXC_GPIO_PORT_TO_NUM(3, 16), 1);
|
gpio_set_value(IMX_GPIO_NR(3, 16), 1);
|
||||||
|
|
||||||
udelay(5000);
|
udelay(5000);
|
||||||
#endif
|
#endif
|
||||||
|
@ -161,12 +161,12 @@ int board_late_init(void)
|
||||||
e = getenv("gs_base_board");
|
e = getenv("gs_base_board");
|
||||||
if (e != NULL) {
|
if (e != NULL) {
|
||||||
if (strcmp(e, "G283") == 0) {
|
if (strcmp(e, "G283") == 0) {
|
||||||
int key = gpio_get_value(MXC_GPIO_PORT_TO_NUM(2, 29));
|
int key = gpio_get_value(IMX_GPIO_NR(2, 29));
|
||||||
|
|
||||||
if (key) {
|
if (key) {
|
||||||
/* Switch on both LEDs to inidcate boot mode */
|
/* Switch on both LEDs to inidcate boot mode */
|
||||||
gpio_set_value(MXC_GPIO_PORT_TO_NUM(1, 29), 0);
|
gpio_set_value(IMX_GPIO_NR(1, 29), 0);
|
||||||
gpio_set_value(MXC_GPIO_PORT_TO_NUM(4, 21), 0);
|
gpio_set_value(IMX_GPIO_NR(4, 21), 0);
|
||||||
|
|
||||||
setenv("preboot", "run gs_slow_boot");
|
setenv("preboot", "run gs_slow_boot");
|
||||||
} else
|
} else
|
||||||
|
|
|
@ -31,6 +31,7 @@
|
||||||
#define CONFIG_MACH_TYPE 3769
|
#define CONFIG_MACH_TYPE 3769
|
||||||
|
|
||||||
#include <asm/arch/imx-regs.h>
|
#include <asm/arch/imx-regs.h>
|
||||||
|
#include <asm/imx-common/gpio.h>
|
||||||
|
|
||||||
#define CONFIG_CMDLINE_TAG
|
#define CONFIG_CMDLINE_TAG
|
||||||
#define CONFIG_SETUP_MEMORY_TAGS
|
#define CONFIG_SETUP_MEMORY_TAGS
|
||||||
|
@ -53,7 +54,7 @@
|
||||||
#define CONFIG_SPI_FLASH_SST
|
#define CONFIG_SPI_FLASH_SST
|
||||||
#define CONFIG_MXC_SPI
|
#define CONFIG_MXC_SPI
|
||||||
#define CONFIG_SF_DEFAULT_BUS 0
|
#define CONFIG_SF_DEFAULT_BUS 0
|
||||||
#define CONFIG_SF_DEFAULT_CS (0|(GPIO_NUMBER(3, 19)<<8))
|
#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8))
|
||||||
#define CONFIG_SF_DEFAULT_SPEED 25000000
|
#define CONFIG_SF_DEFAULT_SPEED 25000000
|
||||||
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
|
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
|
||||||
#endif
|
#endif
|
||||||
|
|
Loading…
Reference in New Issue