sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

OMAP3 pandora: setup pin mux for pins used on rev3 boards 

Setup pin mux for GPIO pins connected on rev3 or later
boards. Also change NUB2 IRQ pin. This should not affect
older boards because they don't have any nubs (analog
controllers) attached to them.
This commit is contained in:
Grazvydas Ignotas 2009-07-08 00:29:59 +03:00 committed by Jean-Christophe PLAGNIOL-VILLARD
parent 67c97c346b
commit 5ff78122f2
1 changed files with 10 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
board/omap3/pandora/pandora.h
View File

@ -242,13 +242,15 @@ const omap3_sysinfo sysinfo = {
/* - WIFI_IRQ*/\
MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M4)) /*GPIO_161*/\
/* - nIRQ_NUB1*/\
MUX_VAL(CP(CAM_WEN), (IEN | PTU | DIS | M4)) /*GPIO_167*/\
MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTU | DIS | M4)) /*GPIO_162*/\
/* - nIRQ_NUB2*/\
/*Various other stuff*/\
MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | DIS | M4)) /*GPIO_163*/\
/* - nOC_USB5*/\
MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M4)) /*GPIO_22*/\
/* - MSECURE*/\
MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M4)) /*GPIO_115*/\
/* - POP_OVERHEAT*/\
/*External Resets and Enables*/\
MUX_VAL(CP(ETK_D0_ES2), (IDIS | PTD | DIS | M4)) /*GPIO_14*/\
/* - nHDPHN_SHUTDOWN*/\
@ -262,6 +264,13 @@ const omap3_sysinfo sysinfo = {
/* - RESET_NUBS*/\
MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTU | EN | M4)) /*GPIO_164*/\
/* - EN_USB_5V*/\
/*Spare GPIOs*/\
MUX_VAL(CP(GPMC_NCS7), (IEN | PTD | EN | M4)) /*GPIO_58*/\
MUX_VAL(CP(GPMC_WAIT2), (IEN | PTD | EN | M4)) /*GPIO_64*/\
MUX_VAL(CP(GPMC_WAIT3), (IEN | PTD | EN | M4)) /*GPIO_65*/\
MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M4)) /*GPIO_95*/\
MUX_VAL(CP(CAM_WEN), (IEN | PTD | EN | M4)) /*GPIO_167*/\
MUX_VAL(CP(HDQ_SIO), (IEN | PTD | EN | M4)) /*GPIO_170*/\
/*HS USB OTG Port (connects to HSUSB0)*/\
MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\
MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\