Kirkwood: dram_init is moved to dram.c

For all Kirkwood boards so far dram_init function is duplicated
dram_init function is moved to dram.c and relevant code from all
board specific files removed

If any board needs specific dram init handling than standard one,
then, a macro CONFIG_SYS_BOARD_DRAM_INIT should be defined in
board config header file and the dram_init function can be put
in board specific source file
For ex. keymile boards

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
This commit is contained in:
Prafulla Wadaskar 2010-09-30 19:33:19 +05:30
parent 3b467ec444
commit 6edf0f121f
7 changed files with 39 additions and 55 deletions

View file

@ -23,8 +23,11 @@
*/
#include <config.h>
#include <common.h>
#include <asm/arch/kirkwood.h>
DECLARE_GLOBAL_DATA_PTR;
#define KW_REG_CPUCS_WIN_BAR(x) (KW_REGISTER(0x1500) + (x * 0x08))
#define KW_REG_CPUCS_WIN_SZ(x) (KW_REGISTER(0x1504) + (x * 0x08))
/*
@ -56,3 +59,38 @@ u32 kw_sdram_bs(enum memory_bank bank)
result += 0x01000000;
return result;
}
#ifndef CONFIG_SYS_BOARD_DRAM_INIT
int dram_init(void)
{
int i;
gd->ram_size = 0;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
gd->bd->bi_dram[i].start = kw_sdram_bar(i);
gd->bd->bi_dram[i].size = kw_sdram_bs(i);
/*
* It is assumed that all memory banks are consecutive
* and without gaps.
* If the gap is found, ram_size will be reported for
* consecutive memory only
*/
if (gd->bd->bi_dram[i].start != gd->ram_size)
break;
gd->ram_size += gd->bd->bi_dram[i].size;
}
return 0;
}
/*
* If this function is not defined here,
* board.c alters dram bank zero configuration defined above.
*/
void dram_init_banksize(void)
{
dram_init();
}
#endif /* CONFIG_SYS_BOARD_DRAM_INIT */

View file

@ -108,17 +108,6 @@ int board_init(void)
return 0;
}
int dram_init(void)
{
int i;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
gd->bd->bi_dram[i].start = kw_sdram_bar(i);
gd->bd->bi_dram[i].size = kw_sdram_bs(i);
}
return 0;
}
#ifdef CONFIG_RESET_PHY_R
void mv_phy_88e1121_init(char *name)
{

View file

@ -110,17 +110,6 @@ int board_init(void)
return 0;
}
int dram_init(void)
{
int i;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
gd->bd->bi_dram[i].start = kw_sdram_bar(i);
gd->bd->bi_dram[i].size = kw_sdram_bs(i);
}
return 0;
}
#ifdef CONFIG_MV88E61XX_SWITCH
void reset_phy(void)
{

View file

@ -113,17 +113,6 @@ int board_init(void)
return 0;
}
int dram_init(void)
{
int i;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
gd->bd->bi_dram[i].start = kw_sdram_bar(i);
gd->bd->bi_dram[i].size = kw_sdram_bs(i);
}
return 0;
}
#ifdef CONFIG_RESET_PHY_R
/* Configure and enable MV88E1116 PHY */
void reset_phy(void)

View file

@ -109,17 +109,6 @@ int board_init(void)
return 0;
}
int dram_init(void)
{
int i;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
gd->bd->bi_dram[i].start = kw_sdram_bar(i);
gd->bd->bi_dram[i].size = kw_sdram_bs(i);
}
return 0;
}
void mv_phy_88e1116_init(char *name)
{
u16 reg;

View file

@ -108,17 +108,6 @@ int board_init(void)
return 0;
}
int dram_init(void)
{
int i;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
gd->bd->bi_dram[i].start = kw_sdram_bar(i);
gd->bd->bi_dram[i].size = kw_sdram_bs(i);
}
return 0;
}
#ifdef CONFIG_RESET_PHY_R
/* Configure and enable MV88E1116 PHY */
void reset_phy(void)

View file

@ -85,6 +85,7 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_SYS_BOARD_DRAM_INIT /* Used board specific dram_init */
/*
* How to get access to the slot ID. Put this here to make it easy