sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH. 

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
This commit is contained in:
Bartlomiej Sieka 2007-05-27 17:26:46 +02:00
parent 4520fd4d2c
commit 7049288fb1
2 changed files with 22 additions and 22 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
board/motionpro/motionpro.c
View File

@ -102,7 +102,7 @@ void reset_phy(void)
/*
* Helper function to initialize SDRAM controller.
*/
static void sdram_start (int hi_addr)
static void sdram_start(int hi_addr)
{
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@ -134,7 +134,7 @@ static void sdram_start (int hi_addr)
/*
* Initalize SDRAM - configure SDRAM controller, detect memory size.
*/
long int initdram (int board_type)
long int initdram(int board_type)
{
ulong dramsize = 0;
#ifndef CFG_RAMBOOT
@ -187,7 +187,7 @@ long int initdram (int board_type)
}
int checkboard (void)
int checkboard(void)
{
uchar rev = *(vu_char *)CPLD_REV_REGISTER;
printf("Board: Promess Motion-PRO board (CPLD rev. 0x%02x)\n", rev);
@ -204,7 +204,7 @@ void ft_board_setup(void *blob, bd_t *bd)
#if defined(CONFIG_STATUS_LED)
void __led_init (led_id_t regaddr, int state)
void __led_init(led_id_t regaddr, int state)
{
*((vu_long *) regaddr) |= ENABLE_GPIO_OUT;
@ -214,7 +214,7 @@ void __led_init (led_id_t regaddr, int state)
*((vu_long *) regaddr) &= ~LED_ON;
}
void __led_set (led_id_t regaddr, int state)
void __led_set(led_id_t regaddr, int state)
{
if (state == STATUS_LED_ON)
*((vu_long *) regaddr) |= LED_ON;
@ -222,7 +222,7 @@ void __led_set (led_id_t regaddr, int state)
*((vu_long *) regaddr) &= ~LED_ON;
}
void __led_toggle (led_id_t regaddr)
void __led_toggle(led_id_t regaddr)
{
*((vu_long *) regaddr) ^= LED_ON;
}

32
include/configs/motionpro.h
View File

@ -117,27 +117,27 @@
"fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \
"ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \
"multi_image_file=kernel+initrd+dtb.img\0" \
"load=tftp $(u-boot_addr) $(u-boot)\0" \
"load=tftp ${u-boot_addr} ${u-boot}\0" \
"update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; " \
"cp.b $(u-boot_addr) fff00000 $(filesize);" \
"cp.b ${u-boot_addr} fff00000 ${filesize};" \
"prot on fff00000 fff3ffff\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
"nfsroot=${serverip}:${rootpath}\0" \
"fat_args=setenv bootargs rw\0" \
"addmtd=setenv bootargs $(bootargs) $(mtdparts)\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):" \
"$(netmask):$(hostname):$(netdev):off panic=1 " \
"console=$(console)\0" \
"net_nfs=tftp $(kernel_addr) $(bootfile); " \
"tftp $(fdt_addr) $(fdt_file); run nfsargs addip; " \
"bootm $(kernel_addr) - $(fdt_addr)\0" \
"net_self=tftp $(kernel_addr) $(bootfile); " \
"tftp $(fdt_addr) $(fdt_file); " \
"tftp $(ramdisk_addr) $(ramdisk_file); " \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
"${netmask}:${hostname}:${netdev}:off panic=1 " \
"console=${console}\0" \
"net_nfs=tftp ${kernel_addr} ${bootfile}; " \
"tftp ${fdt_addr} ${fdt_file}; run nfsargs addip; " \
"bootm ${kernel_addr} - ${fdt_addr}\0" \
"net_self=tftp ${kernel_addr} ${bootfile}; " \
"tftp ${fdt_addr} ${fdt_file}; " \
"tftp ${ramdisk_addr} ${ramdisk_file}; " \
"run ramargs addip; " \
"bootm $(kernel_addr) $(ramdisk_addr) $(fdt_addr)\0" \
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
"fat_multi=run fat_args addip; fatload ide 0:1 " \
"${multi_image_addr} ${multi_image_file}; " \
"bootm ${multi_image_addr}\0" \
@ -418,6 +418,6 @@ extern void __led_set(led_id_t id, int state);
#define OF_CPU "PowerPC,5200@0"
#define OF_SOC "soc5200@f0000000"
#define OF_TBCLK (bd->bi_busfreq / 4)
#define OF_STDOUT_PAT "/soc5200@f0000000/serial@2000"
#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
#endif /* __CONFIG_H */