ARM: lacie_kw: add support for WIRELESS_SPACE
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
This commit is contained in:
Albert ARIBAUD
Prafulla Wadaskar
parent
9d86f0c30b
commit
7202e8ae51
|
|
@ -0,0 +1,46 @@
|
|||
#
|
||||
# Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
|
||||
#
|
||||
# Based on Kirkwood support:
|
||||
# (C) Copyright 2009
|
||||
# Marvell Semiconductor <www.marvell.com>
|
||||
# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
|
||||
include $(TOPDIR)/config.mk
|
||||
ifneq ($(OBJTREE),$(SRCTREE))
|
||||
$(shell mkdir -p $(obj)../common)
|
||||
endif
|
||||
|
||||
LIB = $(obj)lib$(BOARD).o
|
||||
|
||||
COBJS := $(BOARD).o ../common/common.o
|
||||
|
||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
||||
OBJS := $(addprefix $(obj),$(COBJS))
|
||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
||||
|
||||
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
||||
$(call cmd_link_o_target, $(OBJS) $(SOBJS))
|
||||
|
||||
#########################################################################
|
||||
|
||||
# defines $(obj).depend target
|
||||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
#########################################################################
|
||||
|
|
@ -0,0 +1,82 @@
|
|||
#
|
||||
# Copyright (C) 2012 Albert ARIBAUD <albert.u.boot@aribaud.net>
|
||||
#
|
||||
# Based on netspace_v2 kwbimage.cfg:
|
||||
# Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
|
||||
#
|
||||
# Based on Kirkwood support:
|
||||
# (C) Copyright 2009
|
||||
# Marvell Semiconductor <www.marvell.com>
|
||||
# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
#
|
||||
# See file CREDITS for list of people who contributed to this
|
||||
# project.
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU General Public License as
|
||||
# published by the Free Software Foundation; either version 2 of
|
||||
# the License, or (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# Refer docs/README.kwimage for more details about how-to configure
|
||||
# and create kirkwood boot image
|
||||
#
|
||||
|
||||
# Boot Media configurations
|
||||
BOOT_FROM nand # Boot from NAND flash
|
||||
NAND_PAGE_SIZE 800
|
||||
|
||||
# SOC registers configuration using bootrom header extension
|
||||
# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
|
||||
|
||||
# Values taken from image original LaCie U-Boot header dump!
|
||||
|
||||
# Configure RGMII-0 interface pad voltage to 1.8V
|
||||
DATA 0xFFD100e0 0x1B1B1B9B
|
||||
|
||||
#Dram initalization for SINGLE x16 CL=5 @ 400MHz
|
||||
DATA 0xFFD01400 0x43000c30 # DDR Configuration register
|
||||
|
||||
DATA 0xFFD01404 0x37743000 # DDR Controller Control Low
|
||||
|
||||
DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1)
|
||||
|
||||
DATA 0xFFD0140C 0x00000A19 # DDR Timing (High)
|
||||
|
||||
DATA 0xFFD01410 0x0000CCCC # DDR Address Control
|
||||
|
||||
DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
|
||||
|
||||
DATA 0xFFD01418 0x00000000 # DDR Operation
|
||||
|
||||
DATA 0xFFD0141C 0x00000662 # DDR Mode
|
||||
|
||||
DATA 0xFFD01420 0x00000004 # DDR Extended Mode
|
||||
|
||||
DATA 0xFFD01424 0x0000F07F # DDR Controller Control High
|
||||
|
||||
DATA 0xFFD01428 0x00096630 # DDR2 ODT Read Timing (default values)
|
||||
|
||||
DATA 0xFFD0147C 0x00009663 # DDR2 ODT Write Timing (default values)
|
||||
|
||||
DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size
|
||||
DATA 0xFFD01508 0x00000000 # CS[1]n Base address to 0x0
|
||||
DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled
|
||||
DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
|
||||
DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
|
||||
DATA 0xFFD01494 0x00120012 # DDR ODT Control (Low)
|
||||
DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
|
||||
DATA 0xFFD0149C 0x0000E40F # CPU ODT Control
|
||||
DATA 0xFFD01480 0x00000001 # DDR Initialization Control
|
||||
DATA 0xFFD20134 0x66666666
|
||||
DATA 0xFFD20138 0x66666666
|
||||
DATA 0xFFD10000 0x01112222
|
||||
DATA 0xFFD1000C 0x00000000
|
||||
DATA 0xFFD10104 0x00000000
|
||||
DATA 0xFFD10100 0x40000000
|
||||
# End of Header extension
|
||||
DATA 0x0 0x0
|
||||
|
|
@ -0,0 +1,176 @@
|
|||
/*
|
||||
* Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
|
||||
*
|
||||
* Based on Kirkwood support:
|
||||
* (C) Copyright 2009
|
||||
* Marvell Semiconductor <www.marvell.com>
|
||||
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <command.h>
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/kirkwood.h>
|
||||
#include <asm/arch/mpp.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
|
||||
#include "../common/common.h"
|
||||
#include "netdev.h"
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
/* GPIO configuration: start FAN at low speed, USB and HDD */
|
||||
|
||||
#define WIRELESS_SPACE_OE_LOW 0xFF006808
|
||||
#define WIRELESS_SPACE_OE_HIGH 0x0000F989
|
||||
#define WIRELESS_SPACE_OE_VAL_LOW 0x00010080
|
||||
#define WIRELESS_SPACE_OE_VAL_HIGH 0x00000240
|
||||
|
||||
#define WIRELESS_SPACE_REAR_BUTTON 13
|
||||
#define WIRELESS_SPACE_FRONT_BUTTON 43
|
||||
|
||||
const u32 kwmpp_config[] = {
|
||||
MPP0_NF_IO2,
|
||||
MPP1_NF_IO3,
|
||||
MPP2_NF_IO4,
|
||||
MPP3_NF_IO5,
|
||||
MPP4_NF_IO6,
|
||||
MPP5_NF_IO7,
|
||||
MPP6_SYSRST_OUTn,
|
||||
MPP7_GPO, /* Fan speed (bit 1) */
|
||||
MPP8_TW_SDA,
|
||||
MPP9_TW_SCK,
|
||||
MPP10_UART0_TXD,
|
||||
MPP11_UART0_RXD,
|
||||
MPP13_GPIO, /* Red led */
|
||||
MPP14_GPIO, /* USB fuse */
|
||||
MPP15_SATA0_ACTn,
|
||||
MPP16_GPIO, /* SATA 0 power */
|
||||
MPP17_GPIO, /* SATA 1 power */
|
||||
MPP18_NF_IO0,
|
||||
MPP19_NF_IO1,
|
||||
MPP20_GE1_0, /* Gigabit Ethernet 1 */
|
||||
MPP21_GE1_1,
|
||||
MPP22_GE1_2,
|
||||
MPP23_GE1_3,
|
||||
MPP24_GE1_4,
|
||||
MPP25_GE1_5,
|
||||
MPP26_GE1_6,
|
||||
MPP27_GE1_7,
|
||||
MPP28_GE1_8,
|
||||
MPP29_GE1_9,
|
||||
MPP30_GE1_10,
|
||||
MPP31_GE1_11,
|
||||
MPP32_GE1_12,
|
||||
MPP33_GE1_13,
|
||||
MPP34_GE1_14,
|
||||
MPP35_GE1_15,
|
||||
MPP36_GPIO, /* Fan speed (bit 2) */
|
||||
MPP37_GPIO, /* Fan speed (bit 0) */
|
||||
MPP38_GPIO, /* Fan power */
|
||||
MPP39_GPIO, /* Fan rotation fail */
|
||||
MPP40_GPIO, /* Ethernet switch link */
|
||||
MPP41_GPIO, /* USB enable host vbus */
|
||||
MPP42_GPIO, /* LED clock control */
|
||||
MPP43_GPIO, /* WPS button (0=Pushed, 1=Released) */
|
||||
MPP44_GPIO, /* Red LED on/off */
|
||||
MPP45_GPIO, /* Red LED timer blink (on=off=100ms) */
|
||||
MPP46_GPIO, /* Green LED on/off */
|
||||
MPP47_GPIO, /* LED (blue, green) SATA activity blink */
|
||||
MPP48_GPIO, /* Blue LED on/off */
|
||||
0
|
||||
};
|
||||
|
||||
struct mv88e61xx_config swcfg = {
|
||||
.name = "egiga0",
|
||||
.vlancfg = MV88E61XX_VLANCFG_ROUTER,
|
||||
.rgmii_delay = MV88E61XX_RGMII_DELAY_EN,
|
||||
.led_init = MV88E61XX_LED_INIT_EN,
|
||||
.mdip = MV88E61XX_MDIP_NOCHANGE,
|
||||
.portstate = MV88E61XX_PORTSTT_FORWARDING,
|
||||
.cpuport = 0x20,
|
||||
.ports_enabled = 0x3F,
|
||||
};
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
/* Gpio configuration */
|
||||
kw_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH,
|
||||
WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH);
|
||||
|
||||
/* Multi-Purpose Pins Functionality configuration */
|
||||
kirkwood_mpp_conf(kwmpp_config, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* Machine number */
|
||||
gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
|
||||
|
||||
/* Boot parameters address */
|
||||
gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if defined(CONFIG_MISC_INIT_R)
|
||||
int misc_init_r(void)
|
||||
{
|
||||
#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
|
||||
if (!getenv("ethaddr")) {
|
||||
uchar mac[6];
|
||||
if (lacie_read_mac_address(mac) == 0)
|
||||
eth_setenv_enetaddr("ethaddr", mac);
|
||||
}
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
|
||||
/* Configure and initialize PHY */
|
||||
void reset_phy(void)
|
||||
{
|
||||
/* configure switch on egiga0 */
|
||||
mv88e61xx_switch_initialize(&swcfg);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_KIRKWOOD_GPIO) && defined(CONFIG_WIRELESS_SPACE_CMD)
|
||||
/* Return GPIO button status */
|
||||
static int
|
||||
do_ws(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
||||
{
|
||||
if (strcmp(argv[1], "button") == 0) {
|
||||
if (strcmp(argv[2], "rear") == 0)
|
||||
/* invert GPIO result for intuitive while/until use */
|
||||
return !kw_gpio_get_value(WIRELESS_SPACE_REAR_BUTTON);
|
||||
else if (strcmp(argv[2], "front") == 0)
|
||||
return kw_gpio_get_value(WIRELESS_SPACE_FRONT_BUTTON);
|
||||
else
|
||||
return -1;
|
||||
} else {
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
|
||||
U_BOOT_CMD(ws, 3, 0, do_ws,
|
||||
"Return GPIO button status 0=off 1=on",
|
||||
"- ws button rear|front: test buttons' states\n"
|
||||
);
|
||||
#endif
|
||||
|
|
@ -171,6 +171,7 @@ netspace_lite_v2 arm arm926ejs netspace_v2 LaCie
|
|||
netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MAX_V2
|
||||
netspace_mini_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MINI_V2
|
||||
netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_V2
|
||||
wireless_space arm arm926ejs wireless_space LaCie kirkwood
|
||||
dreamplug arm arm926ejs - Marvell kirkwood
|
||||
guruplug arm arm926ejs - Marvell kirkwood
|
||||
mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood
|
||||
|
|
|
|||
|
|
@ -0,0 +1,194 @@
|
|||
/*
|
||||
* Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net>
|
||||
*
|
||||
* Based on the netspace_v2 code which is
|
||||
* Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef _CONFIG_WIRELESS_SPACE_H
|
||||
#define _CONFIG_WIRELESS_SPACE_H
|
||||
|
||||
/*
|
||||
* Machine number definition
|
||||
*/
|
||||
#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */
|
||||
#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE
|
||||
#define CONFIG_IDENT_STRING " Wireless Space"
|
||||
|
||||
/*
|
||||
* High Level Configuration Options (easy to change)
|
||||
*/
|
||||
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
|
||||
#define CONFIG_KIRKWOOD /* SoC Family Name */
|
||||
/* SoC name */
|
||||
#define CONFIG_KW88F6281
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
||||
|
||||
/*
|
||||
* Commands configuration
|
||||
*/
|
||||
#define CONFIG_SYS_NO_FLASH /* no NOR or SPI flash */
|
||||
#include <config_cmd_default.h>
|
||||
#define CONFIG_CMD_ENV
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_NAND
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_IDE
|
||||
#define CONFIG_CMD_USB
|
||||
|
||||
/*
|
||||
* Core clock definition
|
||||
*/
|
||||
#define CONFIG_SYS_TCLK 166000000 /* 166MHz */
|
||||
|
||||
/*
|
||||
* SDRAM configuration
|
||||
*/
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
|
||||
/*
|
||||
* Different SDRAM configuration and size for some of the boards derived
|
||||
* from the Network Space v2
|
||||
*/
|
||||
|
||||
/*
|
||||
* mv-common.h should be defined after CMD configs since it used them
|
||||
* to enable certain macros
|
||||
*/
|
||||
#include "mv-common.h"
|
||||
|
||||
/* Remove or override few declarations from mv-common.h */
|
||||
#undef CONFIG_RBTREE
|
||||
#undef CONFIG_SYS_IDE_MAXBUS
|
||||
#undef CONFIG_SYS_IDE_MAXDEVICE
|
||||
#define CONFIG_SYS_IDE_MAXBUS 1
|
||||
#define CONFIG_SYS_IDE_MAXDEVICE 1
|
||||
#undef CONFIG_SYS_PROMPT
|
||||
#define CONFIG_SYS_PROMPT "ws> "
|
||||
|
||||
/*
|
||||
* Ethernet Driver configuration
|
||||
*/
|
||||
#ifdef CONFIG_CMD_NET
|
||||
#define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */
|
||||
#define CONFIG_MVGBE_PORTS {1, 0} /* enable only egiga0... */
|
||||
#define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */
|
||||
#define CONFIG_PHY_BASE_ADR 0xa /* ... through a 'fake' PHY */
|
||||
#define CONFIG_MII
|
||||
#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
||||
#define CONFIG_NETCONSOLE
|
||||
#define CONFIG_MV88E61XX_SWITCH
|
||||
#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
|
||||
#define CONFIG_MV88E61XX_CMD
|
||||
#define CONFIG_CMD_TFTPPUT
|
||||
#endif /* CONFIG_CMD_NET */
|
||||
|
||||
/*
|
||||
* SATA Driver configuration
|
||||
*/
|
||||
#ifdef CONFIG_MVSATA_IDE
|
||||
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
|
||||
#endif /* CONFIG_MVSATA_IDE */
|
||||
|
||||
/*
|
||||
* Enable GPI0 support
|
||||
*/
|
||||
#define CONFIG_KIRKWOOD_GPIO
|
||||
|
||||
/*
|
||||
* Enable I2C support
|
||||
*/
|
||||
#ifdef CONFIG_CMD_I2C
|
||||
/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
|
||||
#define CONFIG_CMD_EEPROM
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */
|
||||
#endif /* CONFIG_CMD_I2C */
|
||||
|
||||
/*
|
||||
* Partition support
|
||||
*/
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_EFI_PARTITION
|
||||
|
||||
/*
|
||||
* File systems support
|
||||
*/
|
||||
#define CONFIG_CMD_EXT2
|
||||
#define CONFIG_CMD_FAT
|
||||
|
||||
/*
|
||||
* Use the HUSH parser
|
||||
*/
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
|
||||
/*
|
||||
* Console configuration
|
||||
*/
|
||||
#define CONFIG_CONSOLE_MUX
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
||||
|
||||
/*
|
||||
* Enable device tree support
|
||||
*/
|
||||
#define CONFIG_OF_LIBFDT
|
||||
|
||||
/*
|
||||
* Environment variables configurations
|
||||
*/
|
||||
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
|
||||
#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
|
||||
#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
|
||||
|
||||
/*
|
||||
* Board-specific command to make using buttons etc easier
|
||||
*/
|
||||
|
||||
#define CONFIG_WIRELESS_SPACE_CMD
|
||||
|
||||
/*
|
||||
* Default environment variables
|
||||
*/
|
||||
#define CONFIG_PREBOOT
|
||||
|
||||
#define CONFIG_BOOTARGS "console=ttyS0,115200"
|
||||
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"if run usbload || run diskload; then bootm; fi"
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"stdin=serial\0" \
|
||||
"stdout=serial\0" \
|
||||
"stderr=serial\0" \
|
||||
"bootfile=uImage\0" \
|
||||
"loadaddr=0x800000\0" \
|
||||
"autoload=no\0" \
|
||||
"netconsole=" \
|
||||
"set stdin $stdin,nc; " \
|
||||
"set stdout $stdout,nc; " \
|
||||
"set stderr $stderr,nc;\0" \
|
||||
"diskload=ide reset && " \
|
||||
"ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \
|
||||
"usbload=usb start && " \
|
||||
"fatload usb 0:1 $loadaddr /boot/$bootfile\0" \
|
||||
"preboot=" \
|
||||
"dhcp && run netconsole\0"
|
||||
|
||||
#endif /* _CONFIG_WIRELESS_SPACE_H */
|
||||
Loading…
Reference in New Issue