move README.imx31 to doc/ and merge with README.mx31
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This commit is contained in:
parent
1ed7a7f0f5
commit
77a0355f60
13
README.imx31
13
README.imx31
|
@ -1,13 +0,0 @@
|
||||||
i.MX31 specific Configuration Options:
|
|
||||||
--------------------------------------
|
|
||||||
|
|
||||||
- Timer precision:
|
|
||||||
CONFIG_MX31_TIMER_HIGH_PRECISION
|
|
||||||
|
|
||||||
Enable higher precision timer. The low-precision timer
|
|
||||||
(default) provides approximately 4% error, whereas the
|
|
||||||
high-precision timer is about 0.4% accurate. The extra
|
|
||||||
accuracy is achieved at the cost of higher computational
|
|
||||||
overhead, which, in places where time is measured, should
|
|
||||||
not be critical, so, it should be safe to enable this
|
|
||||||
option.
|
|
|
@ -0,0 +1,29 @@
|
||||||
|
U-Boot for Freescale i.MX31
|
||||||
|
|
||||||
|
This file contains information for the port of U-Boot to the Freescale
|
||||||
|
i.MX31 SoC.
|
||||||
|
|
||||||
|
1. CONFIGURATION OPTIONS/SETTINGS
|
||||||
|
---------------------------------
|
||||||
|
|
||||||
|
1.1 Configuration of MC13783 SPI bus
|
||||||
|
------------------------------------
|
||||||
|
The power management companion chip MC13783 is connected to the
|
||||||
|
i.MX31 via an SPI bus. Use the following configuration options
|
||||||
|
to setup the bus and chip select used for a particular board.
|
||||||
|
|
||||||
|
CONFIG_MC13783_SPI_BUS -- defines the SPI bus the MC13783 is connected to.
|
||||||
|
Note that 0 is CSPI1, 1 is CSPI2 and 2 is CSPI3.
|
||||||
|
CONFIG_MC13783_SPI_CS -- define the chip select the MC13783 s connected to.
|
||||||
|
|
||||||
|
1.2 Timer precision
|
||||||
|
-------------------
|
||||||
|
CONFIG_MX31_TIMER_HIGH_PRECISION
|
||||||
|
|
||||||
|
Enable higher precision timer. The low-precision timer
|
||||||
|
(default) provides approximately 4% error, whereas the
|
||||||
|
high-precision timer is about 0.4% accurate. The extra
|
||||||
|
accuracy is achieved at the cost of higher computational
|
||||||
|
overhead, which, in places where time is measured, should
|
||||||
|
not be critical, so, it should be safe to enable this
|
||||||
|
option.
|
|
@ -1,17 +0,0 @@
|
||||||
U-Boot for Freescale i.MX31
|
|
||||||
|
|
||||||
This file contains information for the port of U-Boot to the Freescale
|
|
||||||
i.MX31 SoC.
|
|
||||||
|
|
||||||
1. CONFIGURATION OPTIONS/SETTINGS
|
|
||||||
---------------------------------
|
|
||||||
|
|
||||||
1.1 Configuration of MC13783 SPI bus
|
|
||||||
------------------------------------
|
|
||||||
The power management companion chip MC13783 is connected to the
|
|
||||||
i.MX31 via an SPI bus. Use the following configuration options
|
|
||||||
to setup the bus and chip select used for a particular board.
|
|
||||||
|
|
||||||
CONFIG_MC13783_SPI_BUS -- defines the SPI bus the MC13783 is connected to.
|
|
||||||
Note that 0 is CSPI1, 1 is CSPI2 and 2 is CSPI3.
|
|
||||||
CONFIG_MC13783_SPI_CS -- define the chip select the MC13783 s connected to.
|
|
Loading…
Reference in New Issue