net: zynq_gem: Calculate clock dividers dynamically

Remove hard coded clock divider setting and use the Zynq clock framework
to dynamically calculate appropriate dividers at run time.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
This commit is contained in:
Soren Brinkmann 2013-11-21 13:39:01 -08:00 committed by Michal Simek
parent 1cd46ed2d3
commit 97598fcf10
3 changed files with 20 additions and 12 deletions

View File

@ -8,6 +8,7 @@
#include <asm/io.h>
#include <malloc.h>
#include <asm/arch/hardware.h>
#include <asm/arch/clk.h>
#define SLCR_LOCK_MAGIC 0x767B
#define SLCR_UNLOCK_MAGIC 0xDF0D
@ -50,8 +51,10 @@ void zynq_slcr_cpu_reset(void)
}
/* Setup clk for network */
void zynq_slcr_gem_clk_setup(u32 gem_id, u32 clk)
void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate)
{
int ret;
zynq_slcr_unlock();
if (gem_id > 1) {
@ -59,14 +62,14 @@ void zynq_slcr_gem_clk_setup(u32 gem_id, u32 clk)
goto out;
}
ret = zynq_clk_set_rate(gem0_clk + gem_id, clk_rate);
if (ret)
goto out;
if (gem_id) {
/* Set divisors for appropriate frequency in GEM_CLK_CTRL */
writel(clk, &slcr_base->gem1_clk_ctrl);
/* Configure GEM_RCLK_CTRL */
writel(1, &slcr_base->gem1_rclk_ctrl);
} else {
/* Set divisors for appropriate frequency in GEM_CLK_CTRL */
writel(clk, &slcr_base->gem0_clk_ctrl);
/* Configure GEM_RCLK_CTRL */
writel(1, &slcr_base->gem0_rclk_ctrl);
}

View File

@ -10,7 +10,7 @@
extern void zynq_slcr_lock(void);
extern void zynq_slcr_unlock(void);
extern void zynq_slcr_cpu_reset(void);
extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 clk);
extern void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate);
extern void zynq_slcr_devcfg_disable(void);
extern void zynq_slcr_devcfg_enable(void);
extern u32 zynq_slcr_get_boot_mode(void);

View File

@ -90,6 +90,11 @@
#define ZYNQ_GEM_TXBUF_EXHAUSTED 0x08000000
#define ZYNQ_GEM_TXBUF_UNDERRUN 0x10000000
/* Clock frequencies for different speeds */
#define ZYNQ_GEM_FREQUENCY_10 2500000UL
#define ZYNQ_GEM_FREQUENCY_100 25000000UL
#define ZYNQ_GEM_FREQUENCY_1000 125000000UL
/* Device registers */
struct zynq_gem_regs {
u32 nwctrl; /* Network Control reg */
@ -270,7 +275,8 @@ static int zynq_gem_setup_mac(struct eth_device *dev)
static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
{
u32 i, clk = 0;
u32 i;
unsigned long clk_rate = 0;
struct phy_device *phydev;
const u32 stat_size = (sizeof(struct zynq_gem_regs) -
offsetof(struct zynq_gem_regs, stat)) / 4;
@ -348,23 +354,22 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis)
case SPEED_1000:
writel(ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED1000,
&regs->nwcfg);
clk = (1 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
clk_rate = ZYNQ_GEM_FREQUENCY_1000;
break;
case SPEED_100:
clrsetbits_le32(&regs->nwcfg, ZYNQ_GEM_NWCFG_SPEED1000,
ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED100);
clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
clk_rate = ZYNQ_GEM_FREQUENCY_100;
break;
case SPEED_10:
/* FIXME untested */
clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0);
clk_rate = ZYNQ_GEM_FREQUENCY_10;
break;
}
/* Change the rclk and clk only not using EMIO interface */
if (!priv->emio)
zynq_slcr_gem_clk_setup(dev->iobase !=
ZYNQ_GEM_BASEADDR0, clk);
ZYNQ_GEM_BASEADDR0, clk_rate);
setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
ZYNQ_GEM_NWCTRL_TXEN_MASK);