e1000: remove duplicate macros in e1000.h

Some of the EEPROM Word Offset macros, and a few others,  are defined
twice in e1000.h.

Signed-off-by: Timur Tabi <timur@freescale.com>
This commit is contained in:
Timur Tabi 2011-11-01 06:20:55 +00:00 committed by Wolfgang Denk
parent 6005ed55a9
commit a22481febe
1 changed files with 0 additions and 11 deletions

View File

@ -1678,14 +1678,6 @@ struct e1000_hw {
#define EEPROM_EWEN_OPCODE 0x13 /* EERPOM erase/write enable */
#define EEPROM_EWDS_OPCODE 0x10 /* EERPOM erast/write disable */
/* EEPROM Word Offsets */
#define EEPROM_COMPAT 0x0003
#define EEPROM_ID_LED_SETTINGS 0x0004
#define EEPROM_INIT_CONTROL1_REG 0x000A
#define EEPROM_INIT_CONTROL2_REG 0x000F
#define EEPROM_FLASH_VERSION 0x0032
#define EEPROM_CHECKSUM_REG 0x003F
/* Word definitions for ID LED Settings */
#define ID_LED_RESERVED_0000 0x0000
#define ID_LED_RESERVED_FFFF 0xFFFF
@ -2479,7 +2471,6 @@ struct e1000_hw {
#define ADVERTISE_100_FULL 0x0008
#define ADVERTISE_1000_HALF 0x0010
#define ADVERTISE_1000_FULL 0x0020
#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
#define ICH_FLASH_GFPREG 0x0000
#define ICH_FLASH_HSFSTS 0x0004
@ -2504,7 +2495,6 @@ struct e1000_hw {
#define ICH_GFPREG_BASE_MASK 0x1FFF
#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
/* SPI EEPROM Status Register */
@ -2599,7 +2589,6 @@ struct e1000_hw {
#define PHY_CFG_TIMEOUT 100
#define DEFAULT_80003ES2LAN_TIPG_IPGT_10_100 0x00000009
#define DEFAULT_80003ES2LAN_TIPG_IPGT_1000 0x00000008
#define E1000_TXDMAC_DPP 0x00000001
#define AUTO_ALL_MODES 0
#ifndef E1000_MASTER_SLAVE