Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
This commit is contained in:
Albert ARIBAUD
commit
a5627914da
|
|
@ -607,6 +607,7 @@ Enric Balletbo i Serra <eballetbo@iseebcn.com>
|
|||
|
||||
igep0020 ARM ARMV7 (OMAP3xx SoC)
|
||||
igep0030 ARM ARMV7 (OMAP3xx SoC)
|
||||
igep0032 ARM ARMV7 (OMAP3xx SoC)
|
||||
|
||||
Eric Benard <eric@eukrea.com>
|
||||
|
||||
|
|
|
|||
|
|
@ -55,6 +55,9 @@ void spl_board_init(void)
|
|||
#ifdef CONFIG_SPL_NAND_SUPPORT
|
||||
gpmc_init();
|
||||
#endif
|
||||
#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
|
||||
arch_misc_init();
|
||||
#endif
|
||||
}
|
||||
|
||||
int board_mmc_init(bd_t *bis)
|
||||
|
|
|
|||
|
|
@ -29,6 +29,7 @@
|
|||
#define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */
|
||||
#define BOOT_DEVICE_SPI 11
|
||||
#define BOOT_DEVICE_UART 65
|
||||
#define BOOT_DEVICE_USBETH 68
|
||||
#define BOOT_DEVICE_CPGMAC 70
|
||||
#define BOOT_DEVICE_MMC2_2 0xFF
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -67,7 +67,11 @@ struct davinci_gpio_bank {
|
|||
|
||||
#define gpio_status() gpio_info()
|
||||
#define GPIO_NAME_SIZE 20
|
||||
#if defined(CONFIG_SOC_DA8XX) && !defined(CONFIG_SOC_DA850)
|
||||
#define MAX_NUM_GPIOS 128
|
||||
#else
|
||||
#define MAX_NUM_GPIOS 144
|
||||
#endif
|
||||
#define GPIO_BANK(gp) (davinci_gpio_bank01 + ((gp) >> 5))
|
||||
#define GPIO_BIT(gp) ((gp) & 0x1F)
|
||||
|
||||
|
|
|
|||
|
|
@ -34,10 +34,13 @@
|
|||
const omap3_sysinfo sysinfo = {
|
||||
DDR_STACKED,
|
||||
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
|
||||
"OMAP3 IGEP v2 board",
|
||||
"IGEPv2",
|
||||
#endif
|
||||
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
|
||||
"OMAP3 IGEP COM Module",
|
||||
"IGEP COM MODULE/ELECTRON",
|
||||
#endif
|
||||
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
|
||||
"IGEP COM PROTON",
|
||||
#endif
|
||||
#if defined(CONFIG_ENV_IS_IN_ONENAND)
|
||||
"ONENAND",
|
||||
|
|
|
|||
|
|
@ -31,6 +31,7 @@
|
|||
#include <ACEX1K.h>
|
||||
#include <command.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <linux/byteorder/generic.h>
|
||||
#include "fpga.h"
|
||||
|
||||
#ifdef FPGA_DEBUG
|
||||
|
|
@ -209,9 +210,20 @@ int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie)
|
|||
{
|
||||
unsigned char *data = (unsigned char *) buf;
|
||||
int i;
|
||||
int headerlen = len - cyclone2.size;
|
||||
|
||||
if (headerlen < 0)
|
||||
return FPGA_FAIL;
|
||||
else if (headerlen == sizeof(uint32_t)) {
|
||||
const unsigned int fpgavers_len = 11; /* '0x' + 8 hex digits + \0 */
|
||||
char fpgavers_str[fpgavers_len];
|
||||
snprintf(fpgavers_str, fpgavers_len, "0x%08x",
|
||||
be32_to_cpup((uint32_t*)data));
|
||||
setenv("fpgavers", fpgavers_str);
|
||||
}
|
||||
|
||||
fpga_debug("fpga_wr: buf %p / size %d\n", buf, len);
|
||||
for (i = 0; i < len; i++)
|
||||
for (i = headerlen; i < len; i++)
|
||||
_write_fpga(data[i]);
|
||||
fpga_debug("-%s\n", __func__);
|
||||
|
||||
|
|
|
|||
|
|
@ -326,10 +326,28 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|||
return 0;
|
||||
}
|
||||
|
||||
static inline int is_portrait(void)
|
||||
{
|
||||
int i;
|
||||
unsigned int orient_index = 0; /* idx of char which determines orientation */
|
||||
|
||||
for (i = sizeof(e.id)/sizeof(*e.id) - 1; i>=0; i--) {
|
||||
if (e.id[i] == '-') {
|
||||
orient_index = i+1;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
return (orient_index &&
|
||||
(e.id[orient_index] >= '5') && (e.id[orient_index] <= '8'));
|
||||
}
|
||||
|
||||
int mac_read_from_eeprom(void)
|
||||
{
|
||||
u32 crc, crc_offset = offsetof(struct eeprom, crc);
|
||||
u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */
|
||||
#define FILENAME_LANDSCAPE "mvBlueLynx_X.rbf"
|
||||
#define FILENAME_PORTRAIT "mvBlueLynx_X_sensor_cd.rbf"
|
||||
|
||||
if (read_eeprom()) {
|
||||
printf("EEPROM Read failed.\n");
|
||||
|
|
@ -374,6 +392,12 @@ int mac_read_from_eeprom(void)
|
|||
setenv("serial#", serial_num);
|
||||
}
|
||||
|
||||
/* decide which fpga file to load depending on orientation */
|
||||
if (is_portrait())
|
||||
setenv("fpgafilename", FILENAME_PORTRAIT);
|
||||
else
|
||||
setenv("fpgafilename", FILENAME_LANDSCAPE);
|
||||
|
||||
/* TODO should I calculate CRC here? */
|
||||
return 0;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -35,7 +35,6 @@ static struct module_pin_mux mmc0_pin_mux[] = {
|
|||
{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
|
||||
{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
|
||||
{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
|
||||
{OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */
|
||||
{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */
|
||||
{-1},
|
||||
};
|
||||
|
|
|
|||
|
|
@ -389,7 +389,8 @@ int board_late_init(void)
|
|||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_DRIVER_TI_CPSW
|
||||
#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
|
||||
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
|
||||
static void cpsw_control(int enabled)
|
||||
{
|
||||
/* VTP can be added here */
|
||||
|
|
@ -434,26 +435,26 @@ static struct cpsw_platform_data cpsw_data = {
|
|||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
int rv, n = 0;
|
||||
#ifdef CONFIG_DRIVER_TI_CPSW
|
||||
uint8_t mac_addr[6];
|
||||
uint32_t mac_hi, mac_lo;
|
||||
|
||||
if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
|
||||
printf("<ethaddr> not set. Reading from E-fuse\n");
|
||||
/* try reading mac address from efuse */
|
||||
mac_lo = readl(&cdev->macid0l);
|
||||
mac_hi = readl(&cdev->macid0h);
|
||||
mac_addr[0] = mac_hi & 0xFF;
|
||||
mac_addr[1] = (mac_hi & 0xFF00) >> 8;
|
||||
mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
|
||||
mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
|
||||
mac_addr[4] = mac_lo & 0xFF;
|
||||
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
|
||||
/* try reading mac address from efuse */
|
||||
mac_lo = readl(&cdev->macid0l);
|
||||
mac_hi = readl(&cdev->macid0h);
|
||||
mac_addr[0] = mac_hi & 0xFF;
|
||||
mac_addr[1] = (mac_hi & 0xFF00) >> 8;
|
||||
mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
|
||||
mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
|
||||
mac_addr[4] = mac_lo & 0xFF;
|
||||
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
|
||||
|
||||
#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
|
||||
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
|
||||
if (!getenv("ethaddr")) {
|
||||
printf("<ethaddr> not set. Validating first E-fuse MAC\n");
|
||||
|
||||
if (is_valid_ether_addr(mac_addr))
|
||||
eth_setenv_enetaddr("ethaddr", mac_addr);
|
||||
else
|
||||
goto try_usbether;
|
||||
}
|
||||
|
||||
if (board_is_bone() || board_is_bone_lt() || board_is_idk()) {
|
||||
|
|
@ -494,8 +495,11 @@ int board_eth_init(bd_t *bis)
|
|||
AR8051_RGMII_TX_CLK_DLY);
|
||||
}
|
||||
#endif
|
||||
try_usbether:
|
||||
#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD)
|
||||
#if defined(CONFIG_USB_ETHER) && \
|
||||
(!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT))
|
||||
if (is_valid_ether_addr(mac_addr))
|
||||
eth_setenv_enetaddr("usbnet_devaddr", mac_addr);
|
||||
|
||||
rv = usb_eth_initialize(bis);
|
||||
if (rv < 0)
|
||||
printf("Error %d registering USB_ETHER\n", rv);
|
||||
|
|
|
|||
|
|
@ -72,6 +72,7 @@
|
|||
#define BBTOYS_LCD 0x03000B00
|
||||
#define BCT_BRETTL3 0x01000F00
|
||||
#define BCT_BRETTL4 0x02000F00
|
||||
#define LSR_COM6L_ADPT 0x01001300
|
||||
#define BEAGLE_NO_EEPROM 0xffffffff
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
|
@ -227,6 +228,14 @@ static unsigned int get_expansion_id(void)
|
|||
i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
|
||||
sizeof(expansion_config));
|
||||
|
||||
/* retry reading configuration data with 16bit addressing */
|
||||
if ((expansion_config.device_vendor == 0xFFFFFF00) ||
|
||||
(expansion_config.device_vendor == 0xFFFFFFFF)) {
|
||||
printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n");
|
||||
i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config,
|
||||
sizeof(expansion_config));
|
||||
}
|
||||
|
||||
i2c_set_bus_num(TWL4030_I2C_BUS);
|
||||
|
||||
return expansion_config.device_vendor;
|
||||
|
|
@ -454,6 +463,11 @@ int misc_init_r(void)
|
|||
case BCT_BRETTL4:
|
||||
printf("Recognized bct electronic GmbH brettl4 board\n");
|
||||
break;
|
||||
case LSR_COM6L_ADPT:
|
||||
printf("Recognized LSR COM6L Adapter Board\n");
|
||||
MUX_BBTOYS_WIFI()
|
||||
setenv("buddy", "lsr-com6l-adpt");
|
||||
break;
|
||||
case BEAGLE_NO_EEPROM:
|
||||
printf("No EEPROM on expansion board\n");
|
||||
setenv("buddy", "none");
|
||||
|
|
|
|||
|
|
@ -233,6 +233,7 @@ integratorap_cm946es arm arm946es integrator armltd
|
|||
integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES
|
||||
ca9x4_ct_vxp arm armv7 vexpress armltd
|
||||
am335x_evm arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1
|
||||
am335x_evm_spiboot arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPI_BOOT
|
||||
am335x_evm_uart1 arm armv7 am335x ti am33xx am335x_evm:SERIAL2,CONS_INDEX=2
|
||||
am335x_evm_uart2 arm armv7 am335x ti am33xx am335x_evm:SERIAL3,CONS_INDEX=3
|
||||
am335x_evm_uart3 arm armv7 am335x ti am33xx am335x_evm:SERIAL4,CONS_INDEX=4
|
||||
|
|
@ -262,6 +263,7 @@ igep0020 arm armv7 igep00x0 isee
|
|||
igep0020_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND
|
||||
igep0030 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND
|
||||
igep0030_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND
|
||||
igep0032 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND
|
||||
am3517_evm arm armv7 am3517evm logicpd omap3
|
||||
mt_ventoux arm armv7 mt_ventoux teejet omap3
|
||||
omap3_zoom1 arm armv7 zoom1 logicpd omap3
|
||||
|
|
|
|||
|
|
@ -220,6 +220,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
|
|||
spl_net_load_image(NULL);
|
||||
#endif
|
||||
break;
|
||||
#endif
|
||||
#ifdef CONFIG_SPL_USBETH_SUPPORT
|
||||
case BOOT_DEVICE_USBETH:
|
||||
spl_net_load_image("usb_ether");
|
||||
break;
|
||||
#endif
|
||||
default:
|
||||
debug("SPL: Un-supported Boot Device\n");
|
||||
|
|
|
|||
|
|
@ -0,0 +1,92 @@
|
|||
USING AM335x NETBOOT FEATURE
|
||||
|
||||
Some boards (like TI AM335x based ones) have quite big on-chip RAM and
|
||||
have support for booting via network in ROM. The following describes
|
||||
how to setup network booting and then optionally use this support to flash
|
||||
NAND and bricked (empty) board with only a network cable.
|
||||
|
||||
I. Building the required images
|
||||
1. You have to enable generic SPL configuration options (see
|
||||
docs/README.SPL) as well as CONFIG_SPL_NET_SUPPORT,
|
||||
CONFIG_ETH_SUPPORT, CONFIG_SPL_LIBGENERIC_SUPPORT and
|
||||
CONFIG_SPL_LIBCOMMON_SUPPORT in your board configuration file to build
|
||||
SPL with support for booting over the network. Also you have to enable
|
||||
the driver for the NIC used and CONFIG_SPL_BOARD_INIT option if your
|
||||
board needs some board-specific initialization (TI AM335x EVM does).
|
||||
If you want SPL to use some Vendor Class Identifier (VCI) you can set
|
||||
one with CONFIG_SPL_NET_VCI_STRING option. am335x_evm configuration
|
||||
comes with support for network booting preconfigured.
|
||||
2. Define CONFIG_BOOTCOMMAND for your board to load and run debrick
|
||||
script after boot:
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"setenv autoload no; " \
|
||||
"bootp; " \
|
||||
"if tftp 80000000 debrick.scr; then " \
|
||||
"source 80000000; " \
|
||||
"fi"
|
||||
(Or create additional board configuration with such option).
|
||||
3. Build U-Boot as usual
|
||||
$ make <your_board_name>
|
||||
You will need u-boot.img and spl/u-boot.bin images to perform
|
||||
network boot. Copy them to u-boot-restore.img and
|
||||
u-boot-spl-restore.bin respectively to distinguish this version
|
||||
(with automatic restore running) from the main one.
|
||||
|
||||
II. Host configuration.
|
||||
1. Setup DHCP server (recommended server is ISC DHCPd).
|
||||
- Install DHCP server and setup it to listen on the interface you
|
||||
chose to connect to the board (usually configured in
|
||||
/etc/default/dhcpd or /etc/default/isc-dhcp-server). Make sure there
|
||||
are no other active DHCP servers in the same network segment.
|
||||
- Edit your dhcpd.conf and subnet declaration matching the address
|
||||
on the interface. Specify the range of assigned addresses and bootfile
|
||||
to use. IMPORTANT! Both RBL and SPL use the image filename provided
|
||||
in the BOOTP reply but obviously they need different images (RBL needs
|
||||
raw SPL image -- u-boot-spl-restore.bin while SPL needs main U-Boot
|
||||
image -- u-boot-restore.img). So you have to configure DHCP server to
|
||||
provide different image filenames to RBL and SPL (and possibly another
|
||||
one to main U-Boot). This can be done by checking Vendor Class
|
||||
Identifier (VCI) set by BOOTP client (RBL sets VCI to "DM814x ROM v1.0"
|
||||
and you can set VCI used by SPL with CONFIG_SPL_NET_VCI_STRING option,
|
||||
see above).
|
||||
- If you plan to use TFTP server on another machine you have to set
|
||||
server-name option to point to it.
|
||||
- Here is sample configuration for ISC DHCPd, assuming the interface
|
||||
used to connect to the board is eth0, and it has address 192.168.8.1:
|
||||
|
||||
subnet 192.168.8.0 netmask 255.255.255.0 {
|
||||
range dynamic-bootp 192.168.8.100 192.168.8.199;
|
||||
|
||||
if substring (option vendor-class-identifier, 0, 10) = "DM814x ROM" {
|
||||
filename "u-boot-spl-restore.bin";
|
||||
} elsif substring (option vendor-class-identifier, 0, 17) = "AM335x U-Boot SPL" {
|
||||
filename "u-boot-restore.img";
|
||||
} else {
|
||||
filename "uImage";
|
||||
}
|
||||
}
|
||||
|
||||
2. Setup TFTP server.
|
||||
Install TFTP server and put image files to it's root directory
|
||||
(likely /tftpboot or /var/lib/tftpboot or /srv/tftp). You will need
|
||||
u-boot.img and spl/u-boot-spl-bin files from U-Boot build directory.
|
||||
|
||||
III. Reflashing (debricking) the board.
|
||||
1. Write debrick script. You will need to write a script that will
|
||||
be executed after network boot to perform actual rescue actions. You
|
||||
can use usual U-Boot commands from this script: tftp to load additional
|
||||
files, nand erase/nand write to erase/write the NAND flash.
|
||||
|
||||
2. Create script image from your script. From U-Boot build directory:
|
||||
|
||||
$ ./tools/mkimage -A arm -O U-Boot -C none -T script -d <your script> debrick.scr
|
||||
|
||||
This will create debrick.scr file with your script inside.
|
||||
|
||||
3. Copy debrick.scr to TFTP root directory. You also need to copy
|
||||
there all the files your script tries to load via TFTP. Example script
|
||||
loads u-boot.img and MLO. You have to create these files doing regular
|
||||
(not restore_flash) build and copy them to tftpboot directory.
|
||||
|
||||
4. Boot the board from the network, U-Boot will load debrick script
|
||||
and run it after boot.
|
||||
|
|
@ -33,6 +33,138 @@ static struct gpio_registry {
|
|||
|
||||
#define pinmux(x) (&davinci_syscfg_regs->pinmux[x])
|
||||
|
||||
#if defined(CONFIG_SOC_DA8XX) && !defined(CONFIG_SOC_DA850)
|
||||
static const struct pinmux_config gpio_pinmux[] = {
|
||||
{ pinmux(13), 8, 6 }, /* GP0[0] */
|
||||
{ pinmux(13), 8, 7 },
|
||||
{ pinmux(14), 8, 0 },
|
||||
{ pinmux(14), 8, 1 },
|
||||
{ pinmux(14), 8, 2 },
|
||||
{ pinmux(14), 8, 3 },
|
||||
{ pinmux(14), 8, 4 },
|
||||
{ pinmux(14), 8, 5 },
|
||||
{ pinmux(14), 8, 6 },
|
||||
{ pinmux(14), 8, 7 },
|
||||
{ pinmux(15), 8, 0 },
|
||||
{ pinmux(15), 8, 1 },
|
||||
{ pinmux(15), 8, 2 },
|
||||
{ pinmux(15), 8, 3 },
|
||||
{ pinmux(15), 8, 4 },
|
||||
{ pinmux(15), 8, 5 },
|
||||
{ pinmux(15), 8, 6 }, /* GP1[0] */
|
||||
{ pinmux(15), 8, 7 },
|
||||
{ pinmux(16), 8, 0 },
|
||||
{ pinmux(16), 8, 1 },
|
||||
{ pinmux(16), 8, 2 },
|
||||
{ pinmux(16), 8, 3 },
|
||||
{ pinmux(16), 8, 4 },
|
||||
{ pinmux(16), 8, 5 },
|
||||
{ pinmux(16), 8, 6 },
|
||||
{ pinmux(16), 8, 7 },
|
||||
{ pinmux(17), 8, 0 },
|
||||
{ pinmux(17), 8, 1 },
|
||||
{ pinmux(17), 8, 2 },
|
||||
{ pinmux(17), 8, 3 },
|
||||
{ pinmux(17), 8, 4 },
|
||||
{ pinmux(17), 8, 5 },
|
||||
{ pinmux(17), 8, 6 }, /* GP2[0] */
|
||||
{ pinmux(17), 8, 7 },
|
||||
{ pinmux(18), 8, 0 },
|
||||
{ pinmux(18), 8, 1 },
|
||||
{ pinmux(18), 8, 2 },
|
||||
{ pinmux(18), 8, 3 },
|
||||
{ pinmux(18), 8, 4 },
|
||||
{ pinmux(18), 8, 5 },
|
||||
{ pinmux(18), 8, 6 },
|
||||
{ pinmux(18), 8, 7 },
|
||||
{ pinmux(19), 8, 0 },
|
||||
{ pinmux(9), 8, 2 },
|
||||
{ pinmux(9), 8, 3 },
|
||||
{ pinmux(9), 8, 4 },
|
||||
{ pinmux(9), 8, 5 },
|
||||
{ pinmux(9), 8, 6 },
|
||||
{ pinmux(10), 8, 1 }, /* GP3[0] */
|
||||
{ pinmux(10), 8, 2 },
|
||||
{ pinmux(10), 8, 3 },
|
||||
{ pinmux(10), 8, 4 },
|
||||
{ pinmux(10), 8, 5 },
|
||||
{ pinmux(10), 8, 6 },
|
||||
{ pinmux(10), 8, 7 },
|
||||
{ pinmux(11), 8, 0 },
|
||||
{ pinmux(11), 8, 1 },
|
||||
{ pinmux(11), 8, 2 },
|
||||
{ pinmux(11), 8, 3 },
|
||||
{ pinmux(11), 8, 4 },
|
||||
{ pinmux(9), 8, 7 },
|
||||
{ pinmux(2), 8, 6 },
|
||||
{ pinmux(11), 8, 5 },
|
||||
{ pinmux(11), 8, 6 },
|
||||
{ pinmux(12), 8, 4 }, /* GP4[0] */
|
||||
{ pinmux(12), 8, 5 },
|
||||
{ pinmux(12), 8, 6 },
|
||||
{ pinmux(12), 8, 7 },
|
||||
{ pinmux(13), 8, 0 },
|
||||
{ pinmux(13), 8, 1 },
|
||||
{ pinmux(13), 8, 2 },
|
||||
{ pinmux(13), 8, 3 },
|
||||
{ pinmux(13), 8, 4 },
|
||||
{ pinmux(13), 8, 5 },
|
||||
{ pinmux(11), 8, 7 },
|
||||
{ pinmux(12), 8, 0 },
|
||||
{ pinmux(12), 8, 1 },
|
||||
{ pinmux(12), 8, 2 },
|
||||
{ pinmux(12), 8, 3 },
|
||||
{ pinmux(9), 8, 1 },
|
||||
{ pinmux(7), 8, 3 }, /* GP5[0] */
|
||||
{ pinmux(7), 8, 4 },
|
||||
{ pinmux(7), 8, 5 },
|
||||
{ pinmux(7), 8, 6 },
|
||||
{ pinmux(7), 8, 7 },
|
||||
{ pinmux(8), 8, 0 },
|
||||
{ pinmux(8), 8, 1 },
|
||||
{ pinmux(8), 8, 2 },
|
||||
{ pinmux(8), 8, 3 },
|
||||
{ pinmux(8), 8, 4 },
|
||||
{ pinmux(8), 8, 5 },
|
||||
{ pinmux(8), 8, 6 },
|
||||
{ pinmux(8), 8, 7 },
|
||||
{ pinmux(9), 8, 0 },
|
||||
{ pinmux(7), 8, 1 },
|
||||
{ pinmux(7), 8, 2 },
|
||||
{ pinmux(5), 8, 1 }, /* GP6[0] */
|
||||
{ pinmux(5), 8, 2 },
|
||||
{ pinmux(5), 8, 3 },
|
||||
{ pinmux(5), 8, 4 },
|
||||
{ pinmux(5), 8, 5 },
|
||||
{ pinmux(5), 8, 6 },
|
||||
{ pinmux(5), 8, 7 },
|
||||
{ pinmux(6), 8, 0 },
|
||||
{ pinmux(6), 8, 1 },
|
||||
{ pinmux(6), 8, 2 },
|
||||
{ pinmux(6), 8, 3 },
|
||||
{ pinmux(6), 8, 4 },
|
||||
{ pinmux(6), 8, 5 },
|
||||
{ pinmux(6), 8, 6 },
|
||||
{ pinmux(6), 8, 7 },
|
||||
{ pinmux(7), 8, 0 },
|
||||
{ pinmux(1), 8, 0 }, /* GP7[0] */
|
||||
{ pinmux(1), 8, 1 },
|
||||
{ pinmux(1), 8, 2 },
|
||||
{ pinmux(1), 8, 3 },
|
||||
{ pinmux(1), 8, 4 },
|
||||
{ pinmux(1), 8, 5 },
|
||||
{ pinmux(1), 8, 6 },
|
||||
{ pinmux(1), 8, 7 },
|
||||
{ pinmux(2), 8, 0 },
|
||||
{ pinmux(2), 8, 1 },
|
||||
{ pinmux(2), 8, 2 },
|
||||
{ pinmux(2), 8, 3 },
|
||||
{ pinmux(2), 8, 4 },
|
||||
{ pinmux(2), 8, 5 },
|
||||
{ pinmux(0), 1, 0 },
|
||||
{ pinmux(0), 1, 1 },
|
||||
};
|
||||
#else
|
||||
static const struct pinmux_config gpio_pinmux[] = {
|
||||
{ pinmux(1), 8, 7 }, /* GP0[0] */
|
||||
{ pinmux(1), 8, 6 },
|
||||
|
|
@ -179,6 +311,7 @@ static const struct pinmux_config gpio_pinmux[] = {
|
|||
{ pinmux(18), 8, 3 },
|
||||
{ pinmux(18), 8, 2 },
|
||||
};
|
||||
#endif
|
||||
|
||||
int gpio_request(unsigned gpio, const char *label)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -61,12 +61,38 @@
|
|||
"mmcdev=0\0" \
|
||||
"mmcroot=/dev/mmcblk0p2 ro\0" \
|
||||
"mmcrootfstype=ext4 rootwait\0" \
|
||||
"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
|
||||
"nandrootfstype=ubifs rootwait=1\0" \
|
||||
"nandsrcaddr=0x280000\0" \
|
||||
"nandimgsize=0x500000\0" \
|
||||
"rootpath=/export/rootfs\0" \
|
||||
"nfsopts=nolock\0" \
|
||||
"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
|
||||
"::off\0" \
|
||||
"ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
|
||||
"ramrootfstype=ext2\0" \
|
||||
"mmcargs=setenv bootargs console=${console} " \
|
||||
"${optargs} " \
|
||||
"root=${mmcroot} " \
|
||||
"rootfstype=${mmcrootfstype}\0" \
|
||||
"nandargs=setenv bootargs console=${console} " \
|
||||
"${optargs} " \
|
||||
"root=${nandroot} " \
|
||||
"rootfstype=${nandrootfstype}\0" \
|
||||
"spiroot=/dev/mtdblock4 rw\0" \
|
||||
"spirootfstype=jffs2\0" \
|
||||
"spisrcaddr=0xe0000\0" \
|
||||
"spiimgsize=0x362000\0" \
|
||||
"spibusno=0\0" \
|
||||
"spiargs=setenv bootargs console=${console} " \
|
||||
"${optargs} " \
|
||||
"root=${spiroot} " \
|
||||
"rootfstype=${spirootfstype}\0" \
|
||||
"netargs=setenv bootargs console=${console} " \
|
||||
"${optargs} " \
|
||||
"root=/dev/nfs " \
|
||||
"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
|
||||
"ip=dhcp\0" \
|
||||
"bootenv=uEnv.txt\0" \
|
||||
"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
|
||||
"importbootenv=echo Importing environment from mmc ...; " \
|
||||
|
|
@ -81,6 +107,21 @@
|
|||
"mmcboot=echo Booting from mmc ...; " \
|
||||
"run mmcargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"nandboot=echo Booting from nand ...; " \
|
||||
"run nandargs; " \
|
||||
"nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"spiboot=echo Booting from spi ...; " \
|
||||
"run spiargs; " \
|
||||
"sf probe ${spibusno}:0; " \
|
||||
"sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"netboot=echo Booting from network ...; " \
|
||||
"setenv autoload no; " \
|
||||
"dhcp; " \
|
||||
"tftp ${loadaddr} ${bootfile}; " \
|
||||
"run netargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"ramboot=echo Booting from ramdisk ...; " \
|
||||
"run ramargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
|
|
@ -106,6 +147,8 @@
|
|||
"if run loaduimage; then " \
|
||||
"run mmcboot;" \
|
||||
"fi;" \
|
||||
"else " \
|
||||
"run nandboot;" \
|
||||
"fi;" \
|
||||
|
||||
/* Clock Defines */
|
||||
|
|
@ -237,8 +280,8 @@
|
|||
#define CONFIG_SPL_SPI_LOAD
|
||||
#define CONFIG_SPL_SPI_BUS 0
|
||||
#define CONFIG_SPL_SPI_CS 0
|
||||
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
|
||||
#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
|
||||
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x80000
|
||||
#define CONFIG_SPL_MUSB_NEW_SUPPORT
|
||||
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
|
||||
|
||||
#define CONFIG_SPL_BOARD_INIT
|
||||
|
|
@ -312,8 +355,41 @@
|
|||
#ifdef CONFIG_MUSB_GADGET
|
||||
#define CONFIG_USB_ETHER
|
||||
#define CONFIG_USB_ETH_RNDIS
|
||||
#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
|
||||
#endif /* CONFIG_MUSB_GADGET */
|
||||
|
||||
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
|
||||
/* disable host part of MUSB in SPL */
|
||||
#undef CONFIG_MUSB_HOST
|
||||
/*
|
||||
* Disable UART, CPSW ethernet support and extra environment settings so we
|
||||
* will fit within 101KiB.
|
||||
*/
|
||||
#undef CONFIG_SPL_ETH_SUPPORT
|
||||
#undef CONFIG_SPL_YMODEM_SUPPORT
|
||||
#undef CONFIG_EXTRA_ENV_SETTINGS
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Default to using SPI for environment, etc. We have multiple copies
|
||||
* of SPL as the ROM will check these locations.
|
||||
* 0x0 - 0x20000 : First copy of SPL
|
||||
* 0x20000 - 0x40000 : Second copy of SPL
|
||||
* 0x40000 - 0x60000 : Third copy of SPL
|
||||
* 0x60000 - 0x80000 : Fourth copy of SPL
|
||||
* 0x80000 - 0xDF000 : U-Boot
|
||||
* 0xDF000 - 0xE0000 : U-Boot Environment
|
||||
* 0xE0000 - 0x442000 : Linux Kernel
|
||||
* 0x442000 - 0x800000 : Userland
|
||||
*/
|
||||
#if defined(CONFIG_SPI_BOOT)
|
||||
# undef CONFIG_ENV_IS_NOWHERE
|
||||
# define CONFIG_ENV_IS_IN_SPI_FLASH
|
||||
# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
||||
# define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */
|
||||
# define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
|
||||
#endif /* SPI support */
|
||||
|
||||
/* Unsupported features */
|
||||
#undef CONFIG_USE_IRQ
|
||||
|
||||
|
|
@ -346,10 +422,12 @@
|
|||
/* CS0 */
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND
|
||||
devices */
|
||||
#if !defined(CONFIG_SPI_BOOT)
|
||||
#undef CONFIG_ENV_IS_NOWHERE
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
|
||||
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif /* ! __CONFIG_AM335X_EVM_H */
|
||||
|
|
|
|||
|
|
@ -42,6 +42,7 @@
|
|||
#define CONFIG_MACH_DAVINCI_DA850_EVM
|
||||
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
|
||||
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
|
||||
#define CONFIG_SOC_DA850 /* TI DA850 SoC */
|
||||
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
|
||||
#define CONFIG_SYS_OSCIN_FREQ 24000000
|
||||
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
|
||||
|
|
|
|||
|
|
@ -36,6 +36,7 @@
|
|||
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/omap3.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
/*
|
||||
* Display CPU and Board information
|
||||
|
|
@ -86,7 +87,10 @@
|
|||
#define CONFIG_DOS_PARTITION 1
|
||||
|
||||
/* define to enable boot progress via leds */
|
||||
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
|
||||
(CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
|
||||
#define CONFIG_SHOW_BOOT_PROGRESS
|
||||
#endif
|
||||
|
||||
/* USB */
|
||||
#define CONFIG_MUSB_UDC 1
|
||||
|
|
@ -118,7 +122,8 @@
|
|||
#ifdef CONFIG_BOOT_NAND
|
||||
#define CONFIG_CMD_NAND
|
||||
#endif
|
||||
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
|
||||
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
|
||||
(CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
|
||||
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
|
||||
#endif
|
||||
#define CONFIG_CMD_DHCP
|
||||
|
|
|
|||
|
|
@ -90,9 +90,9 @@
|
|||
/*
|
||||
* select serial console configuration
|
||||
*/
|
||||
#define CONFIG_CONS_INDEX 3
|
||||
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
|
||||
#define CONFIG_SERIAL3 3 /* UART3 */
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
|
||||
#define CONFIG_SERIAL1 1 /* UART1 */
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
|
||||
|
|
@ -102,6 +102,10 @@
|
|||
#define CONFIG_OMAP_HSMMC 1
|
||||
#define CONFIG_DOS_PARTITION 1
|
||||
|
||||
/* silent console by default */
|
||||
#define CONFIG_SYS_DEVICE_NULLDEV 1
|
||||
#define CONFIG_SILENT_CONSOLE 1
|
||||
|
||||
/* USB */
|
||||
#define CONFIG_MUSB_UDC 1
|
||||
#define CONFIG_USB_OMAP3 1
|
||||
|
|
@ -152,19 +156,23 @@
|
|||
|
||||
/* Environment information */
|
||||
#undef CONFIG_ENV_OVERWRITE /* disallow overwriting serial# and ethaddr */
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
#define CONFIG_BOOTDELAY 0
|
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
||||
#define CONFIG_AUTOBOOT_KEYED
|
||||
#define CONFIG_AUTOBOOT_STOP_STR "S"
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"silent=true\0" \
|
||||
"loadaddr=0x82000000\0" \
|
||||
"usbtty=cdc_acm\0" \
|
||||
"console=ttyO2,115200n8\0" \
|
||||
"console=ttyO0,115200n8\0" \
|
||||
"mpurate=600\0" \
|
||||
"vram=12M\0" \
|
||||
"dvimode=1024x768-24@60\0" \
|
||||
"defaultdisplay=dvi\0" \
|
||||
"fpgafilename=mvbluelynx_x.rbf\0" \
|
||||
"loadfpga=if fatload mmc ${mmcdev} ${loadaddr} ${fpgafilename}; then " \
|
||||
"fpga load 0 ${loadaddr} ${filesize}; " \
|
||||
"loadfpga=if ext2load mmc ${mmcdev}:2 ${loadaddr} "\
|
||||
"/lib/firmware/mvblx/${fpgafilename}; then " \
|
||||
"fpga load 0 ${loadaddr} ${filesize}; " \
|
||||
"fi;\0" \
|
||||
"mmcdev=0\0" \
|
||||
"mmcroot=/dev/mmcblk0p2 rw\0" \
|
||||
|
|
@ -177,6 +185,7 @@
|
|||
"omapdss.def_disp=${defaultdisplay} " \
|
||||
"root=${mmcroot} " \
|
||||
"rootfstype=${mmcrootfstype} " \
|
||||
"mvfw.fpgavers=${fpgavers} " \
|
||||
"${cmdline_suffix}\0" \
|
||||
"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
|
||||
"importbootenv=echo Importing environment from mmc ...; " \
|
||||
|
|
|
|||
|
|
@ -81,6 +81,8 @@ LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/memory.o
|
|||
LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/libnet.o
|
||||
LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/libnet.o
|
||||
LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o
|
||||
LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/libusb_musb-new.o
|
||||
LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/libusb_gadget.o
|
||||
|
||||
ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
|
||||
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
|
||||
|
|
|
|||
Loading…
Reference in New Issue