keymile: Fix Coding style issues for keymile boards.

- use I/O accessors
  -> For accessing the FPGA therefore a struct km_bec_fpga
     is introduced.
- no longer externs needed
- to defines, that only select functions, don;t assign a
  numeric value
- Codingstyle changes to prevent checkpatch errors/warnings

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
cc: Kim Phillips <kim.phillips@freescale.com>
cc: Holger Brunck <holger.brunck@keymile.com>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
This commit is contained in:
Heiko Schocher 2011-03-15 16:52:29 +01:00 committed by Wolfgang Denk
parent 802d996324
commit b11f53f31b
9 changed files with 476 additions and 420 deletions

View File

@ -39,9 +39,7 @@
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
#include <i2c.h>
extern int i2c_soft_read_pin (void);
int ivm_calc_crc (unsigned char *buf, int len)
int ivm_calc_crc(unsigned char *buf, int len)
{
const unsigned short crc_tab[16] = {
0x0000, 0xCC01, 0xD801, 0x1400,
@ -71,20 +69,20 @@ int ivm_calc_crc (unsigned char *buf, int len)
return crc;
}
static int ivm_set_value (char *name, char *value)
static int ivm_set_value(char *name, char *value)
{
char tempbuf[256];
if (value != NULL) {
sprintf (tempbuf, "%s=%s", name, value);
return set_local_var (tempbuf, 0);
sprintf(tempbuf, "%s=%s", name, value);
return set_local_var(tempbuf, 0);
} else {
unset_local_var (name);
unset_local_var(name);
}
return 0;
}
static int ivm_get_value (unsigned char *buf, int len, char *name, int off,
static int ivm_get_value(unsigned char *buf, int len, char *name, int off,
int check)
{
unsigned short val;
@ -92,21 +90,21 @@ static int ivm_get_value (unsigned char *buf, int len, char *name, int off,
if ((buf[off + 0] != buf[off + 2]) &&
(buf[off + 2] != buf[off + 4])) {
printf ("%s Error corrupted %s\n", __FUNCTION__, name);
printf("%s Error corrupted %s\n", __func__, name);
val = -1;
} else {
val = buf[off + 0] + (buf[off + 1] << 8);
if ((val == 0) && (check == 1))
val = -1;
}
sprintf ((char *)valbuf, "%x", val);
ivm_set_value (name, (char *)valbuf);
sprintf((char *)valbuf, "%x", val);
ivm_set_value(name, (char *)valbuf);
return val;
}
#define INVENTORYBLOCKSIZE 0x100
#define INVENTORYDATAADDRESS 0x21
#define INVENTORYDATASIZE (INVENTORYBLOCKSIZE - INVENTORYDATAADDRESS - 3)
#define INV_BLOCKSIZE 0x100
#define INV_DATAADDRESS 0x21
#define INVENTORYDATASIZE (INV_BLOCKSIZE - INV_DATAADDRESS - 3)
#define IVM_POS_SHORT_TEXT 0
#define IVM_POS_MANU_ID 1
@ -121,19 +119,19 @@ static int ivm_get_value (unsigned char *buf, int len, char *name, int off,
#define IVM_POS_HISTORY 10
#define IVM_POS_SYMBOL_ONLY 11
static char convert_char (char c)
static char convert_char(char c)
{
return (c < ' ' || c > '~') ? '.' : c;
}
static int ivm_findinventorystring (int type,
static int ivm_findinventorystring(int type,
unsigned char* const string,
unsigned long maxlen,
unsigned char *buf)
{
int xcode = 0;
unsigned long cr = 0;
unsigned long addr = INVENTORYDATAADDRESS;
unsigned long addr = INV_DATAADDRESS;
unsigned long size = 0;
unsigned long nr = type;
int stop = 0; /* stop on semicolon */
@ -157,8 +155,10 @@ static int ivm_findinventorystring (int type,
addr++;
}
/* the expected number of CR was found until the end of the IVM
* content --> fill string */
/*
* the expected number of CR was found until the end of the IVM
* content --> fill string
*/
if (addr < INVENTORYDATASIZE) {
/* Copy the IVM string in the corresponding string */
for (; (buf[addr] != '\r') &&
@ -170,64 +170,62 @@ static int ivm_findinventorystring (int type,
convert_char (buf[addr]));
}
/* copy phase is done: check if everything is ok. If not,
/*
* copy phase is done: check if everything is ok. If not,
* the inventory data is most probably corrupted: tell
* the world there is a problem! */
* the world there is a problem!
*/
if (addr == INVENTORYDATASIZE) {
xcode = -1;
printf ("Error end of string not found\n");
printf("Error end of string not found\n");
} else if ((size >= (maxlen - 1)) &&
(buf[addr] != '\r')) {
xcode = -1;
printf ("string too long till next CR\n");
printf("string too long till next CR\n");
}
} else {
/* some CR are missing...
* the inventory data is most probably corrupted */
/*
* some CR are missing...
* the inventory data is most probably corrupted
*/
xcode = -1;
printf ("not enough cr found\n");
printf("not enough cr found\n");
}
return xcode;
}
#define GET_STRING(name, which, len) \
if (ivm_findinventorystring (which, valbuf, len, buf) == 0) { \
ivm_set_value (name, (char *)valbuf); \
if (ivm_findinventorystring(which, valbuf, len, buf) == 0) { \
ivm_set_value(name, (char *)valbuf); \
}
static int ivm_check_crc (unsigned char *buf, int block)
static int ivm_check_crc(unsigned char *buf, int block)
{
unsigned long crc;
unsigned long crceeprom;
crc = ivm_calc_crc (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2);
crc = ivm_calc_crc(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2);
crceeprom = (buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 1] + \
buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2] * 256);
if (crc != crceeprom) {
if (block == 0)
printf ("Error CRC Block: %d EEprom: calculated: \
printf("Error CRC Block: %d EEprom: calculated: \
%lx EEprom: %lx\n", block, crc, crceeprom);
return -1;
}
return 0;
}
static int ivm_analyze_block2 (unsigned char *buf, int len)
static int ivm_analyze_block2(unsigned char *buf, int len)
{
unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
unsigned long count;
/* IVM_MacAddress */
sprintf ((char *)valbuf, "%02X:%02X:%02X:%02X:%02X:%02X",
buf[1],
buf[2],
buf[3],
buf[4],
buf[5],
buf[6]);
ivm_set_value ("IVM_MacAddress", (char *)valbuf);
if (getenv ("ethaddr") == NULL)
setenv ((char *)"ethaddr", (char *)valbuf);
sprintf((char *)valbuf, "%pM", buf);
ivm_set_value("IVM_MacAddress", (char *)valbuf);
if (getenv("ethaddr") == NULL)
setenv((char *)"ethaddr", (char *)valbuf);
/* IVM_MacCount */
count = (buf[10] << 24) +
(buf[11] << 16) +
@ -235,48 +233,52 @@ static int ivm_analyze_block2 (unsigned char *buf, int len)
buf[13];
if (count == 0xffffffff)
count = 1;
sprintf ((char *)valbuf, "%lx", count);
ivm_set_value ("IVM_MacCount", (char *)valbuf);
sprintf((char *)valbuf, "%lx", count);
ivm_set_value("IVM_MacCount", (char *)valbuf);
return 0;
}
int ivm_analyze_eeprom (unsigned char *buf, int len)
int ivm_analyze_eeprom(unsigned char *buf, int len)
{
unsigned short val;
unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
unsigned char *tmp;
if (ivm_check_crc (buf, 0) != 0)
if (ivm_check_crc(buf, 0) != 0)
return -1;
ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_BoardId", 0, 1);
val = ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_HWKey", 6, 1);
ivm_get_value(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN,
"IVM_BoardId", 0, 1);
val = ivm_get_value(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN,
"IVM_HWKey", 6, 1);
if (val != 0xffff) {
sprintf ((char *)valbuf, "%x", ((val /100) % 10));
ivm_set_value ("IVM_HWVariant", (char *)valbuf);
sprintf ((char *)valbuf, "%x", (val % 100));
ivm_set_value ("IVM_HWVersion", (char *)valbuf);
sprintf((char *)valbuf, "%x", ((val / 100) % 10));
ivm_set_value("IVM_HWVariant", (char *)valbuf);
sprintf((char *)valbuf, "%x", (val % 100));
ivm_set_value("IVM_HWVersion", (char *)valbuf);
}
ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_Functions", 12, 0);
ivm_get_value(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN,
"IVM_Functions", 12, 0);
GET_STRING("IVM_Symbol", IVM_POS_SYMBOL_ONLY, 8)
GET_STRING("IVM_DeviceName", IVM_POS_SHORT_TEXT, 64)
tmp = (unsigned char *) getenv("IVM_DeviceName");
if (tmp) {
int len = strlen ((char *)tmp);
int len = strlen((char *)tmp);
int i = 0;
while (i < len) {
if (tmp[i] == ';') {
ivm_set_value ("IVM_ShortText", (char *)&tmp[i + 1]);
ivm_set_value("IVM_ShortText",
(char *)&tmp[i + 1]);
break;
}
i++;
}
if (i >= len)
ivm_set_value ("IVM_ShortText", NULL);
ivm_set_value("IVM_ShortText", NULL);
} else {
ivm_set_value ("IVM_ShortText", NULL);
ivm_set_value("IVM_ShortText", NULL);
}
GET_STRING("IVM_ManufacturerID", IVM_POS_MANU_ID, 32)
GET_STRING("IVM_ManufacturerSerialNumber", IVM_POS_MANU_SERIAL, 20)
@ -288,14 +290,15 @@ int ivm_analyze_eeprom (unsigned char *buf, int len)
GET_STRING("IVM_CustomerID", IVM_POS_CUSTOMER_ID, 32)
GET_STRING("IVM_CustomerProductID", IVM_POS_CUSTOMER_PROD_ID, 32)
if (ivm_check_crc (&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], 2) != 0)
if (ivm_check_crc(&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], 2) != 0)
return 0;
ivm_analyze_block2 (&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], CONFIG_SYS_IVM_EEPROM_PAGE_LEN);
ivm_analyze_block2(&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2],
CONFIG_SYS_IVM_EEPROM_PAGE_LEN);
return 0;
}
int ivm_read_eeprom (void)
int ivm_read_eeprom(void)
{
#if defined(CONFIG_I2C_MUX)
I2C_MUX_DEVICE *dev = NULL;
@ -303,33 +306,36 @@ int ivm_read_eeprom (void)
uchar i2c_buffer[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
uchar *buf;
unsigned dev_addr = CONFIG_SYS_IVM_EEPROM_ADR;
int ret;
#if defined(CONFIG_I2C_MUX)
/* First init the Bus, select the Bus */
#if defined(CONFIG_SYS_I2C_IVM_BUS)
dev = i2c_mux_ident_muxstring ((uchar *)CONFIG_SYS_I2C_IVM_BUS);
dev = i2c_mux_ident_muxstring((uchar *)CONFIG_SYS_I2C_IVM_BUS);
#else
buf = (unsigned char *) getenv ("EEprom_ivm");
buf = (unsigned char *) getenv("EEprom_ivm");
if (buf != NULL)
dev = i2c_mux_ident_muxstring (buf);
dev = i2c_mux_ident_muxstring(buf);
#endif
if (dev == NULL) {
printf ("Error couldnt add Bus for IVM\n");
printf("Error couldnt add Bus for IVM\n");
return -1;
}
i2c_set_bus_num (dev->busid);
i2c_set_bus_num(dev->busid);
#endif
buf = (unsigned char *) getenv ("EEprom_ivm_addr");
buf = (unsigned char *) getenv("EEprom_ivm_addr");
if (buf != NULL)
dev_addr = simple_strtoul ((char *)buf, NULL, 16);
dev_addr = simple_strtoul((char *)buf, NULL, 16);
if (i2c_read(dev_addr, 0, 1, i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN) != 0) {
ret = i2c_read(dev_addr, 0, 1, i2c_buffer,
CONFIG_SYS_IVM_EEPROM_MAX_LEN);
if (ret != 0) {
printf ("Error reading EEprom\n");
return -2;
}
return ivm_analyze_eeprom (i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
return ivm_analyze_eeprom(i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
}
#if defined(CONFIG_SYS_I2C_INIT_BOARD)
@ -339,145 +345,117 @@ int ivm_read_eeprom (void)
#if defined(CONFIG_MGCOGE)
#define SDA_MASK 0x00010000
#define SCL_MASK 0x00020000
static void set_pin (int state, unsigned long mask)
static void set_pin(int state, unsigned long mask)
{
volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3);
ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
if (state)
iop->pdat |= (mask);
setbits_be32(&iop->pdat, mask);
else
iop->pdat &= ~(mask);
clrbits_be32(&iop->pdat, mask);
iop->pdir |= (mask);
setbits_be32(&iop->pdir, mask);
}
static int get_pin (unsigned long mask)
static int get_pin(unsigned long mask)
{
volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3);
ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
iop->pdir &= ~(mask);
return (0 != (iop->pdat & (mask)));
clrbits_be32(&iop->pdir, mask);
return 0 != (in_be32(&iop->pdat) & mask);
}
static void set_sda (int state)
static void set_sda(int state)
{
set_pin (state, SDA_MASK);
set_pin(state, SDA_MASK);
}
static void set_scl (int state)
static void set_scl(int state)
{
set_pin (state, SCL_MASK);
set_pin(state, SCL_MASK);
}
static int get_sda (void)
static int get_sda(void)
{
return get_pin (SDA_MASK);
return get_pin(SDA_MASK);
}
static int get_scl (void)
static int get_scl(void)
{
return get_pin (SCL_MASK);
return get_pin(SCL_MASK);
}
#if defined(CONFIG_HARD_I2C)
static void setports (int gpio)
static void setports(int gpio)
{
volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3);
ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
if (gpio) {
iop->ppar &= ~(SDA_MASK | SCL_MASK);
iop->podr &= ~(SDA_MASK | SCL_MASK);
clrbits_be32(&iop->ppar, (SDA_MASK | SCL_MASK));
clrbits_be32(&iop->podr, (SDA_MASK | SCL_MASK));
} else {
iop->ppar |= (SDA_MASK | SCL_MASK);
iop->pdir &= ~(SDA_MASK | SCL_MASK);
iop->podr |= (SDA_MASK | SCL_MASK);
setbits_be32(&iop->ppar, (SDA_MASK | SCL_MASK));
clrbits_be32(&iop->pdir, (SDA_MASK | SCL_MASK));
setbits_be32(&iop->podr, (SDA_MASK | SCL_MASK));
}
}
#endif
#endif
#if defined(CONFIG_KM8XX)
static void set_sda (int state)
{
I2C_SDA(state);
}
static void set_scl (int state)
{
I2C_SCL(state);
}
static int get_sda (void)
{
return I2C_READ;
}
static int get_scl (void)
{
int val;
*(unsigned short *)(I2C_BASE_DIR) &= ~SCL_CONF;
udelay (1);
val = *(unsigned char *)(I2C_BASE_PORT);
return ((val & SCL_BIT) == SCL_BIT);
}
#endif
#if !defined(CONFIG_KMETER1)
static void writeStartSeq (void)
static void writeStartSeq(void)
{
set_sda (1);
udelay (DELAY_HALF_PERIOD);
set_scl (1);
udelay (DELAY_HALF_PERIOD);
set_sda (0);
udelay (DELAY_HALF_PERIOD);
set_scl (0);
udelay (DELAY_HALF_PERIOD);
set_sda(1);
udelay(DELAY_HALF_PERIOD);
set_scl(1);
udelay(DELAY_HALF_PERIOD);
set_sda(0);
udelay(DELAY_HALF_PERIOD);
set_scl(0);
udelay(DELAY_HALF_PERIOD);
}
/* I2C is a synchronous protocol and resets of the processor in the middle
of an access can block the I2C Bus until a powerdown of the full unit is
done. This function toggles the SCL until the SCL and SCA line are
released, but max. 16 times, after this a I2C start-sequence is sent.
This I2C Deblocking mechanism was developed by Keymile in association
with Anatech and Atmel in 1998.
/*
* I2C is a synchronous protocol and resets of the processor in the middle
* of an access can block the I2C Bus until a powerdown of the full unit is
* done. This function toggles the SCL until the SCL and SCA line are
* released, but max. 16 times, after this a I2C start-sequence is sent.
* This I2C Deblocking mechanism was developed by Keymile in association
* with Anatech and Atmel in 1998.
*/
static int i2c_make_abort (void)
static int i2c_make_abort(void)
{
int scl_state = 0;
int sda_state = 0;
int i = 0;
int ret = 0;
if (!get_sda ()) {
if (!get_sda()) {
ret = -1;
while (i < 16) {
i++;
set_scl (0);
udelay (DELAY_ABORT_SEQ);
set_scl (1);
udelay (DELAY_ABORT_SEQ);
scl_state = get_scl ();
sda_state = get_sda ();
set_scl(0);
udelay(DELAY_ABORT_SEQ);
set_scl(1);
udelay(DELAY_ABORT_SEQ);
scl_state = get_scl();
sda_state = get_sda();
if (scl_state && sda_state) {
ret = 0;
break;
}
}
}
if (ret == 0) {
for (i =0; i < 5; i++) {
writeStartSeq ();
}
}
get_sda ();
if (ret == 0)
for (i = 0; i < 5; i++)
writeStartSeq();
get_sda();
return ret;
}
#endif
/**
/*
* i2c_init_board - reset i2c bus. When the board is powercycled during a
* bus transfer it might hang; for details see doc/I2C_Edge_Conditions.
*/
@ -488,36 +466,37 @@ void i2c_init_board(void)
dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
uchar dummy;
out_8 (&dev->cr, (I2C_CR_MSTA));
out_8 (&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA));
out_8(&dev->cr, (I2C_CR_MSTA));
out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA));
dummy = in_8(&dev->dr);
dummy = in_8(&dev->dr);
if (dummy != 0xff) {
dummy = in_8(&dev->dr);
}
out_8 (&dev->cr, (I2C_CR_MEN));
out_8 (&dev->cr, 0x00);
out_8 (&dev->cr, (I2C_CR_MEN));
out_8(&dev->cr, (I2C_CR_MEN));
out_8(&dev->cr, 0x00);
out_8(&dev->cr, (I2C_CR_MEN));
#else
#if defined(CONFIG_HARD_I2C) && !defined(MACH_TYPE_KM_KIRKWOOD)
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
/* disable I2C controller first, otherwhise it thinks we want to */
/* talk to the slave port... */
i2c->i2c_i2mod &= ~0x01;
/*
* disable I2C controller first, otherwhise it thinks we want to
* talk to the slave port...
*/
clrbits_8(&i2c->i2c_i2mod, 0x01);
/* Set the PortPins to GPIO */
setports (1);
setports(1);
#endif
/* Now run the AbortSequence() */
i2c_make_abort ();
i2c_make_abort();
#if defined(CONFIG_HARD_I2C)
/* Set the PortPins back to use for I2C */
setports (0);
setports(0);
#endif
#endif
}
@ -525,7 +504,7 @@ void i2c_init_board(void)
#endif
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
int fdt_set_node_and_value (void *blob,
int fdt_set_node_and_value(void *blob,
char *nodename,
char *regname,
void *var,
@ -534,21 +513,22 @@ int fdt_set_node_and_value (void *blob,
int ret = 0;
int nodeoffset = 0;
nodeoffset = fdt_path_offset (blob, nodename);
nodeoffset = fdt_path_offset(blob, nodename);
if (nodeoffset >= 0) {
ret = fdt_setprop (blob, nodeoffset, regname, var,
ret = fdt_setprop(blob, nodeoffset, regname, var,
size);
if (ret < 0)
printf("ft_blob_update(): cannot set %s/%s "
"property err:%s\n", nodename, regname,
fdt_strerror (ret));
fdt_strerror(ret));
} else {
printf("ft_blob_update(): cannot find %s node "
"err:%s\n", nodename, fdt_strerror (nodeoffset));
"err:%s\n", nodename, fdt_strerror(nodeoffset));
}
return ret;
}
int fdt_get_node_and_value (void *blob,
int fdt_get_node_and_value(void *blob,
char *nodename,
char *propname,
void **var)
@ -556,42 +536,43 @@ int fdt_get_node_and_value (void *blob,
int len;
int nodeoffset = 0;
nodeoffset = fdt_path_offset (blob, nodename);
nodeoffset = fdt_path_offset(blob, nodename);
if (nodeoffset >= 0) {
*var = (void *)fdt_getprop (blob, nodeoffset, propname, &len);
*var = (void *)fdt_getprop(blob, nodeoffset, propname, &len);
if (len == 0) {
/* no value */
printf ("%s no value\n", __FUNCTION__);
printf("%s no value\n", __func__);
return -1;
} else if (len > 0) {
return len;
} else {
printf ("libfdt fdt_getprop(): %s\n",
printf("libfdt fdt_getprop(): %s\n",
fdt_strerror(len));
return -2;
}
} else {
printf("%s: cannot find %s node err:%s\n", __FUNCTION__,
nodename, fdt_strerror (nodeoffset));
printf("%s: cannot find %s node err:%s\n", __func__,
nodename, fdt_strerror(nodeoffset));
return -3;
}
}
#endif
#if !defined(MACH_TYPE_KM_KIRKWOOD)
int ethernet_present (void)
int ethernet_present(void)
{
return (in_8((u8 *)CONFIG_SYS_PIGGY_BASE + CONFIG_SYS_SLOT_ID_OFF) & 0x80);
struct km_bec_fpga *base = (struct km_bec_fpga *)CONFIG_SYS_PIGGY_BASE;
return in_8(&base->bprth) & PIGGY_PRESENT;
}
#endif
int board_eth_init (bd_t *bis)
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_KEYMILE_HDLC_ENET
(void)keymile_hdlc_enet_initialize (bis);
(void)keymile_hdlc_enet_initialize(bis);
#endif
if (ethernet_present ()) {
if (ethernet_present())
return -1;
}
return 0;
}

View File

@ -11,20 +11,50 @@
#ifndef __KEYMILE_COMMON_H
#define __KEYMILE_COMMON_H
int ethernet_present (void);
int ivm_read_eeprom (void);
#define WRG_RESET 0x80
#define H_OPORTS_14 0x40
#define WRG_LED 0x02
#define WRL_BOOT 0x01
#define H_OPORTS_SCC4_ENA 0x10
#define H_OPORTS_SCC4_FD_ENA 0x04
#define H_OPORTS_FCC1_PW_DWN 0x01
#define PIGGY_PRESENT 0x80
struct km_bec_fpga {
unsigned char id;
unsigned char rev;
unsigned char oprth;
unsigned char oprtl;
unsigned char res1[3];
unsigned char bprth;
unsigned char bprtl;
unsigned char res2[6];
unsigned char prst;
unsigned char res3[0xfff0];
unsigned char pgy_id;
unsigned char pgy_rev;
unsigned char pgy_outputs;
unsigned char pgy_eth;
};
int ethernet_present(void);
int ivm_read_eeprom(void);
#ifdef CONFIG_KEYMILE_HDLC_ENET
int keymile_hdlc_enet_initialize (bd_t *bis);
int keymile_hdlc_enet_initialize(bd_t *bis);
#endif
int fdt_set_node_and_value (void *blob,
int fdt_set_node_and_value(void *blob,
char *nodename,
char *regname,
void *var,
int size);
int fdt_get_node_and_value (void *blob,
int fdt_get_node_and_value(void *blob,
char *nodename,
char *propname,
void **var);
int i2c_soft_read_pin(void);
#endif /* __KEYMILE_COMMON_H */

View File

@ -108,12 +108,12 @@ int ethernet_present(void)
int ret = 0;
if (i2c_read(0x10, 2, 1, &buf, 1) != 0) {
printf ("%s: Error reading Boco\n", __FUNCTION__);
printf("%s: Error reading Boco\n", __func__);
return -1;
}
if ((buf & 0x40) == 0x40) {
if ((buf & 0x40) == 0x40)
ret = 1;
}
return ret;
}
@ -258,15 +258,15 @@ void reset_phy(void)
}
#if defined(CONFIG_HUSH_INIT_VAR)
int hush_init_var (void)
int hush_init_var(void)
{
ivm_read_eeprom ();
ivm_read_eeprom();
return 0;
}
#endif
#if defined(CONFIG_BOOTCOUNT_LIMIT)
void bootcount_store (ulong a)
void bootcount_store(ulong a)
{
volatile ulong *save_addr;
volatile ulong size = 0;
@ -279,7 +279,7 @@ void bootcount_store (ulong a)
writel(BOOTCOUNT_MAGIC, &save_addr[1]);
}
ulong bootcount_load (void)
ulong bootcount_load(void)
{
volatile ulong *save_addr;
volatile ulong size = 0;
@ -296,31 +296,31 @@ ulong bootcount_load (void)
#endif
#if defined(CONFIG_SOFT_I2C)
void set_sda (int state)
void set_sda(int state)
{
I2C_ACTIVE;
I2C_SDA(state);
}
void set_scl (int state)
void set_scl(int state)
{
I2C_SCL(state);
}
int get_sda (void)
int get_sda(void)
{
I2C_TRISTATE;
return I2C_READ;
}
int get_scl (void)
int get_scl(void)
{
return (kw_gpio_get_value(SUEN3_SCL_PIN) ? 1 : 0);
}
#endif
#if defined(CONFIG_SYS_EEPROM_WREN)
int eeprom_write_enable (unsigned dev_addr, int state)
int eeprom_write_enable(unsigned dev_addr, int state)
{
kw_gpio_set_value(SUEN3_ENV_WP, !state);

View File

@ -30,8 +30,6 @@
#include "../common/common.h"
extern void disable_addr_trans (void);
extern void enable_addr_trans (void);
const qe_iop_conf_t qe_iop_conf_tab[] = {
/* port pin dir open_drain assign */
@ -62,131 +60,140 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
{0, 0, 0, 0, QE_IOP_TAB_END},
};
static int board_init_i2c_busses (void)
static int board_init_i2c_busses(void)
{
I2C_MUX_DEVICE *dev = NULL;
uchar *buf;
/* Set up the Bus for the DTTs */
buf = (unsigned char *) getenv ("dtt_bus");
buf = (unsigned char *) getenv("dtt_bus");
if (buf != NULL)
dev = i2c_mux_ident_muxstring (buf);
dev = i2c_mux_ident_muxstring(buf);
if (dev == NULL) {
printf ("Error couldn't add Bus for DTT\n");
printf ("please setup dtt_bus to where your\n");
printf ("DTT is found.\n");
printf("Error couldn't add Bus for DTT\n");
printf("please setup dtt_bus to where your\n");
printf("DTT is found.\n");
}
return 0;
}
int board_early_init_r (void)
int board_early_init_r(void)
{
struct km_bec_fpga *base = (struct km_bec_fpga *)CONFIG_SYS_PIGGY_BASE;
unsigned short svid;
/*
* Because of errata in the UCCs, we have to write to the reserved
* registers to slow the clocks down.
*/
svid = SVR_REV(mfspr (SVR));
svid = SVR_REV(mfspr(SVR));
switch (svid) {
case 0x0020:
/*
* MPC8360ECE.pdf QE_ENET10 table 4:
* IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
* IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
*/
setbits_be32((void *)(CONFIG_SYS_IMMR + 0x14a8), 0x0c003000);
break;
case 0x0021:
/*
* MPC8360ECE.pdf QE_ENET10 table 4:
* IMMR + 0x14AC[24:27] = 1010
*/
clrsetbits_be32((void *)(CONFIG_SYS_IMMR + 0x14ac),
0x00000050, 0x000000a0);
break;
}
/* enable the PHY on the PIGGY */
setbits (8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x10003), 0x01);
setbits_8(&base->pgy_eth, 0x01);
/* enable the Unit LED (green) */
setbits (8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x00002), 0x01);
setbits_8(&base->oprth, WRL_BOOT);
/* take FE/GbE PHYs out of reset */
setbits (8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x0000f), 0x1c);
setbits_8(&base->prst, 0x1c);
return 0;
}
int misc_init_r (void)
int misc_init_r(void)
{
/* add board specific i2c busses */
board_init_i2c_busses ();
board_init_i2c_busses();
return 0;
}
int fixed_sdram(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize = 0;
u32 ddr_size;
u32 ddr_size_log2;
im->sysconf.ddrlaw[0].ar = LAWAR_EN | 0x1e;
im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
udelay (200);
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
out_be32(&im->sysconf.ddrlaw[0].ar, (LAWAR_EN | 0x1e));
out_be32(&im->ddr.csbnds[0].csbnds, CONFIG_SYS_DDR_CS0_BNDS);
out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG);
out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_DDR_SDRAM_CFG2);
out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE);
out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE2);
out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL);
out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL);
udelay(200);
out_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
msize = CONFIG_SYS_DDR_SIZE << 20;
disable_addr_trans ();
msize = get_ram_size (CONFIG_SYS_DDR_BASE, msize);
enable_addr_trans ();
disable_addr_trans();
msize = get_ram_size(CONFIG_SYS_DDR_BASE, msize);
enable_addr_trans();
msize /= (1024 * 1024);
if (CONFIG_SYS_DDR_SIZE != msize) {
for (ddr_size = msize << 20, ddr_size_log2 = 0;
(ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++)
(ddr_size > 1);
ddr_size = ddr_size >> 1, ddr_size_log2++)
if (ddr_size & 1)
return -1;
im->sysconf.ddrlaw[0].ar =
LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
im->ddr.csbnds[0].csbnds = (((msize / 16) - 1) & 0xff);
out_be32(&im->sysconf.ddrlaw[0].ar,
(LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE)));
out_be32(&im->ddr.csbnds[0].csbnds,
(((msize / 16) - 1) & 0xff));
}
return msize;
}
phys_size_t initdram (int board_type)
phys_size_t initdram(int board_type)
{
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc (unsigned int dram_size);
#endif
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize = 0;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im)
return -1;
/* DDR SDRAM - Main SODIMM */
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
msize = fixed_sdram ();
out_be32(&im->sysconf.ddrlaw[0].bar,
CONFIG_SYS_DDR_BASE & LAWBAR_BAR);
msize = fixed_sdram();
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
* Initialize DDR ECC byte
*/
ddr_enable_ecc (msize * 1024 * 1024);
ddr_enable_ecc(msize * 1024 * 1024);
#endif
/* return total bus SDRAM size(bytes) -- DDR */
return (msize * 1024 * 1024);
}
int checkboard (void)
int checkboard(void)
{
puts ("Board: Keymile kmeter1");
if (ethernet_present ())
puts (" with PIGGY.");
puts ("\n");
puts("Board: Keymile kmeter1");
if (ethernet_present())
puts(" with PIGGY.");
puts("\n");
return 0;
}
@ -194,13 +201,13 @@ int checkboard (void)
/*
* update property in the blob
*/
void ft_blob_update (void *blob, bd_t *bd)
void ft_blob_update(void *blob, bd_t *bd)
{
/* no board specific update */
}
void ft_board_setup (void *blob, bd_t *bd)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup (blob, bd);
ft_blob_update (blob, bd);
@ -208,10 +215,9 @@ void ft_board_setup (void *blob, bd_t *bd)
#endif
#if defined(CONFIG_HUSH_INIT_VAR)
extern int ivm_read_eeprom (void);
int hush_init_var (void)
int hush_init_var(void)
{
ivm_read_eeprom ();
ivm_read_eeprom();
return 0;
}
#endif

View File

@ -195,33 +195,30 @@ const iop_conf_t iop_conf_tab[4][32] = {
}
};
/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
/*
* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
*
* This routine performs standard 8260 initialization sequence
* and calculates the available memory size. It may be called
* several times to try different SDRAM configurations on both
* 60x and local buses.
*/
static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
ulong orx, volatile uchar * base)
static long int try_init(memctl8260_t *memctl, ulong sdmr,
ulong orx, uchar *base)
{
volatile uchar c = 0xff;
volatile uint *sdmr_ptr;
volatile uint *orx_ptr;
uchar c = 0xff;
ulong maxsize, size;
int i;
/* We must be able to test a location outsize the maximum legal size
/*
* We must be able to test a location outsize the maximum legal size
* to find out THAT we are outside; but this address still has to be
* mapped by the controller. That means, that the initial mapping has
* to be (at least) twice as large as the maximum expected size.
*/
maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
sdmr_ptr = &memctl->memc_psdmr;
orx_ptr = &memctl->memc_or1;
*orx_ptr = orx;
out_be32(&memctl->memc_or1, orx);
/*
* Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
@ -243,53 +240,54 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
* get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
*/
*sdmr_ptr = sdmr | PSDMR_OP_PREA;
*base = c;
out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_PREA);
out_8(base, c);
*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_CBRR);
for (i = 0; i < 8; i++)
*base = c;
out_8(base, c);
*sdmr_ptr = sdmr | PSDMR_OP_MRW;
*(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_MRW);
/* setting MR on address lines */
out_8((uchar *)(base + CONFIG_SYS_MRS_OFFS), c);
*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
*base = c;
out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_NORM | PSDMR_RFEN);
out_8(base, c);
size = get_ram_size ((long *)base, maxsize);
*orx_ptr = orx | ~(size - 1);
size = get_ram_size((long *)base, maxsize);
out_be32(&memctl->memc_or1, orx | ~(size - 1));
return (size);
}
phys_size_t initdram (int board_type)
phys_size_t initdram(int board_type)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
memctl8260_t *memctl = &immap->im_memctl;
long psize;
memctl->memc_psrt = CONFIG_SYS_PSRT;
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
out_8(&memctl->memc_psrt, CONFIG_SYS_PSRT);
out_be16(&memctl->memc_mptpr, CONFIG_SYS_MPTPR);
#ifndef CONFIG_SYS_RAMBOOT
/* 60x SDRAM setup:
*/
psize = try_init (memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1,
(uchar *) CONFIG_SYS_SDRAM_BASE);
psize = try_init(memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1,
(uchar *) CONFIG_SYS_SDRAM_BASE);
#endif /* CONFIG_SYS_RAMBOOT */
icache_enable ();
icache_enable();
return (psize);
}
int checkboard(void)
{
puts ("Board: Keymile mgcoge");
if (ethernet_present ())
puts (" with PIGGY.");
puts ("\n");
puts("Board: Keymile mgcoge");
if (ethernet_present())
puts(" with PIGGY.");
puts("\n");
return 0;
}
@ -314,25 +312,29 @@ int last_stage_init(void)
/*
* Early board initalization.
*/
int board_early_init_r (void)
int board_early_init_r(void)
{
struct km_bec_fpga *base = (struct km_bec_fpga *)CONFIG_SYS_PIGGY_BASE;
/* setup the UPIOx */
/* General Unit Reset disabled, Flash Bank enabled, UnitLed on */
out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x02), 0xc2);
out_8(&base->oprth, (WRG_RESET | H_OPORTS_14 | WRG_LED));
/* SCC4 enable, halfduplex, FCC1 powerdown */
out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x03), 0x15);
out_8(&base->oprtl, (H_OPORTS_SCC4_ENA | H_OPORTS_SCC4_FD_ENA |
H_OPORTS_FCC1_PW_DWN));
return 0;
}
int hush_init_var (void)
int hush_init_var(void)
{
ivm_read_eeprom ();
ivm_read_eeprom();
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
void ft_board_setup (void *blob, bd_t *bd)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup (blob, bd);
ft_cpu_setup(blob, bd);
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */

View File

@ -1,5 +1,5 @@
/*
* (C) Copyright 2008
* (C) Copyright 2008-2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* See file CREDITS for list of people who contributed to this
@ -25,7 +25,7 @@
#define __CONFIG_KEYMILE_H
/* Do boardspecific init for all boards */
#define CONFIG_BOARD_EARLY_INIT_R 1
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_BOOTCOUNT_LIMIT
@ -63,44 +63,44 @@
#define CONFIG_JFFS2_CMDLINE
#define CONFIG_CMD_MTDPARTS
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
#define CONFIG_HUSH_INIT_VAR 1
#define CONFIG_HUSH_INIT_VAR
#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CONFIG_SYS_MEMTEST_START 0x00100000
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x100000
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_SYS_HZ 1000 /* decr. freq: 1 ms ticks */
#define CONFIG_BAUDRATE 115200
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_LOADS_ECHO
#define CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_SYS_BOARD_DRAM_INIT /* Used board specific dram_init */
/*
@ -108,28 +108,28 @@
* to modify in a centralized location. This is used in the HDLC
* driver to set the MAC.
*/
#define CONFIG_CHECK_ETHERNET_PRESENT 1
#define CONFIG_CHECK_ETHERNET_PRESENT
#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE
#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */
#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */
#define CONFIG_I2C_MULTI_BUS 1
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_MAX_I2C_BUS 1
#define CONFIG_SYS_I2C_INIT_BOARD 1
#define CONFIG_I2C_MUX 1
#define CONFIG_SYS_I2C_INIT_BOARD
#define CONFIG_I2C_MUX
/* EEprom support */
#define CONFIG_SYS_I2C_MULTI_EEPROMS 1
#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
/* Support the IVM EEprom */
#define CONFIG_SYS_IVM_EEPROM_ADR 0x50
#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400
#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100
#define CONFIG_SYS_FLASH_PROTECTION 1
#define CONFIG_SYS_FLASH_PROTECTION
/*
* BOOTP options
@ -141,7 +141,7 @@
#define CONFIG_ENV_SIZE 0x04000 /* Size of Environment */
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
/* UBI Support for all Keymile boards */
#define CONFIG_CMD_UBI

View File

@ -6,6 +6,9 @@
* (C) Copyright 2009
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2010-2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
@ -25,7 +28,10 @@
* MA 02110-1301 USA
*/
/* for linking errors see http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */
/*
* for linking errors see
* http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
*/
#ifndef _CONFIG_KM_ARM_H
#define _CONFIG_KM_ARM_H

View File

@ -23,11 +23,9 @@
/*
* High Level Configuration Options
*/
#define CONFIG_E300 1 /* E300 family */
#define CONFIG_QE 1 /* Has QE */
#define CONFIG_MPC83xx 1 /* MPC83xx family */
#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */
#define CONFIG_KMETER1 1 /* KMETER1 board specific */
#define CONFIG_QE /* Has QE */
#define CONFIG_MPC8360 /* MPC8360 CPU specific */
#define CONFIG_KMETER1 /* KMETER1 board specific */
#define CONFIG_HOSTNAME kmeter1
#define CONFIG_SYS_TEXT_BASE 0xF0000000
@ -42,7 +40,7 @@
"mtdparts=boot:768k(u-boot),128k(env),128k(envred)," \
"-(" CONFIG_KM_UBI_PARTITION_NAME ")"
#define CONFIG_MISC_INIT_R 1
#define CONFIG_MISC_INIT_R
/*
* System Clock Setup
*/
@ -114,8 +112,9 @@
#define CONFIG_SYS_DDR_SIZE 2048 /* MB */
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f
#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \
CSCONFIG_ROW_BIT_13 | \
CSCONFIG_COL_BIT_10 | CSCONFIG_ODT_WR_ACS)
CSCONFIG_ROW_BIT_13 | \
CSCONFIG_COL_BIT_10 | \
CSCONFIG_ODT_WR_ACS)
#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
SDRAM_CFG_SREN)
@ -137,14 +136,14 @@
(0 << TIMING_CFG0_WRT_SHIFT) | \
(0 << TIMING_CFG0_RWT_SHIFT))
#define CONFIG_SYS_DDR_TIMING_1 (( TIMING_CFG1_CASLAT_50) | \
( 2 << TIMING_CFG1_WRTORD_SHIFT) | \
( 2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
( 3 << TIMING_CFG1_WRREC_SHIFT) | \
( 7 << TIMING_CFG1_REFREC_SHIFT) | \
( 3 << TIMING_CFG1_ACTTORW_SHIFT) | \
( 8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
( 3 << TIMING_CFG1_PRETOACT_SHIFT))
#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \
(2 << TIMING_CFG1_WRTORD_SHIFT) | \
(2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
(3 << TIMING_CFG1_WRREC_SHIFT) | \
(7 << TIMING_CFG1_REFREC_SHIFT) | \
(3 << TIMING_CFG1_ACTTORW_SHIFT) | \
(8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
(3 << TIMING_CFG1_PRETOACT_SHIFT))
#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
(3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
@ -172,7 +171,7 @@
#undef CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve for Mon */
/*
* Initial RAM Base Address Setup
@ -180,7 +179,8 @@
#define CONFIG_SYS_INIT_RAM_LOCK 1
#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
/*
* Local Bus Configuration & Clock Setup
@ -208,7 +208,7 @@
#define CONFIG_SYS_FLASH_PROTECTION 1
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE /* Window base at flash base */
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001b /* 256MB window size */
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
@ -220,8 +220,9 @@
OR_GPCM_SCY_5 | \
OR_GPCM_TRLX | OR_GPCM_EAD)
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
/* max num of sects on one chip */
#define CONFIG_SYS_MAX_FLASH_SECT 512
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
#undef CONFIG_SYS_FLASH_CHECKSUM
@ -229,13 +230,13 @@
/*
* PRIO1/PIGGY on the local bus CS1
*/
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_PIGGY_BASE /* Window base at flash base */
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_PIGGY_BASE
#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001A /* 128MB window size */
#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_PIGGY_BASE | \
(1 << BR_PS_SHIFT) | /* 8 bit port size */ \
BR_V)
#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) | /* 128MB */ \
#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) | \
OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
OR_GPCM_SCY_2 | \
OR_GPCM_TRLX | OR_GPCM_EAD)
@ -243,7 +244,7 @@
/*
* PAXE on the local bus CS3
*/
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE /* Window base at flash base */
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE
#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000001C /* 512MB window size */
#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_PAXE_BASE | \
@ -267,8 +268,8 @@
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
/* Pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_OF_STDOUT_VIA_ALIAS
/*
@ -278,7 +279,7 @@
#undef CONFIG_PCI /* No PCI */
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#define CONFIG_NET_MULTI
#endif
/*
* QE UEC ethernet configuration
@ -291,7 +292,7 @@
#ifdef CONFIG_UEC_ETH1
#define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */
#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII */
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
@ -305,17 +306,19 @@
#ifndef CONFIG_SYS_RAMBOOT
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
#define CONFIG_ENV_OFFSET (CONFIG_SYS_MONITOR_LEN)
/* Address and size of Redundant Environment Sector */
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
#else /* CFG_RAMBOOT */
#define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */
#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
#define CONFIG_SYS_NO_FLASH /* Flash is not usable now */
#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
#define CONFIG_ENV_SIZE 0x2000
#endif /* CFG_RAMBOOT */
@ -333,9 +336,9 @@
/* EEprom support */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
#define CONFIG_DTT_SENSORS {0, 1, 2, 3} /* Sensor addresses */
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
#define CONFIG_DTT_LM75 /* ON Semi's LM75 */
#define CONFIG_DTT_SENSORS {0, 1, 2, 3} /* Sensor addresses */
#define CONFIG_SYS_DTT_MAX_TEMP 70
#define CONFIG_SYS_DTT_LOW_TEMP -30
#define CONFIG_SYS_DTT_HYSTERESIS 3
@ -361,7 +364,7 @@
* have to be in the first 256 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */
#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
/*
* Core HID Setup
@ -375,45 +378,54 @@
* MMU Setup
*/
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
#define CONFIG_HIGH_BATS /* High BATs supported */
/* DDR: cache cacheable */
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
/* IMMRBAR & PCI IO: cache-inhibit and guarded */
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_10 | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | \
BATU_VP)
#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
/* PRIO1, PIGGY: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PIGGY_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | \
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PIGGY_BASE | BATU_BL_128M | \
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
/* FLASH: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | \
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
/* Stack in dcache: cacheable, no memory coherence */
#define CONFIG_SYS_IBAT4L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
/* PAXE: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | \
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U

View File

@ -29,15 +29,12 @@
* (easy to change)
*/
#define CONFIG_MPC8247 1
#define CONFIG_MPC8272_FAMILY 1
#define CONFIG_MGCOGE 1
#define CONFIG_MPC8247
#define CONFIG_MGCOGE
#define CONFIG_HOSTNAME mgcoge
#define CONFIG_SYS_TEXT_BASE 0xFE000000
#define CONFIG_CPM2 1 /* Has a CPM2 */
/* include common defines/options for all Keymile boards */
#include "keymile-common.h"
@ -69,13 +66,13 @@
#define CONFIG_ETHER_ON_SCC /* Ethernet is on SCC */
#undef CONFIG_ETHER_ON_FCC /* Ethernet is not on FCC */
#undef CONFIG_ETHER_NONE /* No external Ethernet */
#define CONFIG_NET_MULTI 1
#define CONFIG_NET_MULTI
#define CONFIG_ETHER_INDEX 4
#define CONFIG_HAS_ETH0
#define CONFIG_SYS_SCC_TOUT_LOOP 10000000
# define CONFIG_SYS_CMXSCR_VALUE (CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8)
# define CONFIG_SYS_CMXSCR_VALUE (CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8)
#ifndef CONFIG_8260_CLKIN
#define CONFIG_8260_CLKIN 66000000 /* in Hz */
@ -113,8 +110,9 @@
#define CONFIG_SYS_FLASH_SIZE 32
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max num of flash banks */
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */
#define CONFIG_SYS_MAX_FLASH_BANKS 3
/* max num of sects on one chip */
#define CONFIG_SYS_MAX_FLASH_SECT 512
#define CONFIG_SYS_FLASH_BASE_1 0x50000000
#define CONFIG_SYS_FLASH_SIZE_1 32
@ -130,24 +128,26 @@
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384KB for Monitor */
#define CONFIG_SYS_MONITOR_LEN (384 << 10)
#define CONFIG_ENV_IS_IN_FLASH
#ifdef CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE 0x20000
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN
/* Address and size of Redundant Environment Sector */
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
#endif /* CONFIG_ENV_IS_IN_FLASH */
#define CONFIG_ENV_BUFFER_PRINT 1
#define CONFIG_ENV_BUFFER_PRINT
/* enable I2C and select the hardware/software driver */
#undef CONFIG_HARD_I2C /* I2C with hardware support */
#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
#define CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
@ -159,15 +159,23 @@
#define I2C_ACTIVE (iop->pdir |= 0x00010000)
#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
#define I2C_READ ((iop->pdat & 0x00010000) != 0)
#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
else iop->pdat &= ~0x00010000
#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
else iop->pdat &= ~0x00020000
#define I2C_SDA(bit) do { \
if (bit) \
iop->pdat |= 0x00010000; \
else \
iop->pdat &= ~0x00010000; \
} while (0)
#define I2C_SCL(bit) do { \
if (bit) \
iop->pdat |= 0x00020000; \
else \
iop->pdat &= ~0x00020000; \
} while (0)
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
#define CONFIG_DTT_LM75 /* ON Semi's LM75 */
#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
#define CONFIG_SYS_DTT_MAX_TEMP 70
#define CONFIG_SYS_DTT_LOW_TEMP -30
#define CONFIG_SYS_DTT_HYSTERESIS 3
@ -178,8 +186,9 @@
#define CONFIG_SYS_IMMR 0xF0000000
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/* Hard reset configuration word */
@ -194,11 +203,11 @@
#define CONFIG_SYS_HRCW_SLAVE6 0
#define CONFIG_SYS_HRCW_SLAVE7 0
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
#define CONFIG_SYS_HID0_INIT 0
@ -211,14 +220,16 @@
#define CONFIG_SYS_BCR 0x10000000
#define CONFIG_SYS_SCCR (SCCR_PCI_MODE | SCCR_PCI_MODCK)
/*-----------------------------------------------------------------------
/*
*-----------------------------------------------------------------------
* RMR - Reset Mode Register 5-5
*-----------------------------------------------------------------------
* turn on Checkstop Reset Enable
*/
#define CONFIG_SYS_RMR 0
/*-----------------------------------------------------------------------
/*
*-----------------------------------------------------------------------
* TMCNTSC - Time Counter Status and Control 4-40
*-----------------------------------------------------------------------
* Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
@ -226,7 +237,8 @@
*/
#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
/*-----------------------------------------------------------------------
/*
*-----------------------------------------------------------------------
* PISCR - Periodic Interrupt Status and Control 4-42
*-----------------------------------------------------------------------
* Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
@ -234,7 +246,8 @@
*/
#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
/*-----------------------------------------------------------------------
/*
*-----------------------------------------------------------------------
* RCCR - RISC Controller Configuration 13-7
*-----------------------------------------------------------------------
*/
@ -265,14 +278,16 @@
ORxG_TRLX )
/* Bank 1 - 60x bus SDRAM
/*
* Bank 1 - 60x bus SDRAM
*/
#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */
#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20)
#define CONFIG_SYS_MPTPR 0x1800
/*-----------------------------------------------------------------------------
/*
*-----------------------------------------------------------------------------
* Address for Mode Register Set (MRS) command
*-----------------------------------------------------------------------------
*/
@ -286,8 +301,9 @@
#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1
/* SDRAM initialization values
*/
/*
* SDRAM initialization values
*/
#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
ORxS_BPD_8 |\
@ -304,8 +320,9 @@
PSDMR_WRC_1C |\
PSDMR_CL_2)
/* GPIO/PIGGY on CS3 initialization values
*/
/*
* GPIO/PIGGY on CS3 initialization values
*/
#define CONFIG_SYS_PIGGY_BASE 0x30000000
#define CONFIG_SYS_PIGGY_SIZE 128
@ -316,8 +333,9 @@
ORxG_CSNT | ORxG_ACS_DIV2 |\
ORxG_SCY_3_CLK | ORxG_TRLX )
/* Board FPGA on CS4 initialization values
*/
/*
* Board FPGA on CS4 initialization values
*/
#define CONFIG_SYS_FPGA_BASE 0x40000000
#define CONFIG_SYS_FPGA_SIZE 1 /*1KB*/
@ -328,8 +346,9 @@
ORxG_CSNT | ORxG_ACS_DIV2 |\
ORxG_SCY_3_CLK | ORxG_TRLX )
/* CFG-Flash on CS5 initialization values
*/
/*
* CFG-Flash on CS5 initialization values
*/
#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_FLASH_BASE_1 & BRx_BA_MSK) |\
BRx_PS_16 | BRx_MS_GPCM_P | BRx_V)
@ -338,12 +357,12 @@
ORxG_CSNT | ORxG_ACS_DIV2 |\
ORxG_SCY_5_CLK | ORxG_TRLX )
#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
/* pass open firmware flat tree */
#define CONFIG_FIT 1
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#define CONFIG_FIT
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define OF_TBCLK (bd->bi_busfreq / 4)
#define OF_STDOUT_PATH "/soc/cpm/serial@11a90"