sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

ppc4xx: lwmon5: Update Lime initialization 

Change Lime SDRAM initialization to now support 100MHz and
133MHz (if enabled). Also the framebuffer is initialized to
display a blue rectangle with a white border.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Anatolij Gustschin 2007-07-26 15:08:01 +02:00 committed by Stefan Roese
parent 9f24a808f1
commit b66091de6c
2 changed files with 73 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

62
board/lwmon5/lwmon5.c
View File

@ -221,8 +221,8 @@ int misc_init_r(void)
udelay(500);
gpio_write_bit(CFG_GPIO_LIME_RST, 1);
/* Lime memory clock adjusted to 133MHz */
out_be32((void *)CFG_LIME_SDRAM_CLOCK, CFG_LIME_CLOCK_133MHZ);
/* Lime memory clock adjusted to 100MHz */
out_be32((void *)CFG_LIME_SDRAM_CLOCK, CFG_LIME_CLOCK_100MHZ);
/* Wait untill time expired. Because of requirements in lime manual */
udelay(300);
/* Write lime controller memory parameters */
@ -237,6 +237,64 @@ int misc_init_r(void)
gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
/*
* Init display controller
*/
/* Setup dot clock (internal PLL, division rate 1/16) */
out_be32((void *)0xc1fd0100, 0x00000f00);
/* Lime L0 init (16 bpp, 640x480) */
out_be32((void *)0xc1fd0020, 0x801401df);
out_be32((void *)0xc1fd0024, 0x0);
out_be32((void *)0xc1fd0028, 0x0);
out_be32((void *)0xc1fd002c, 0x0);
out_be32((void *)0xc1fd0110, 0x0);
out_be32((void *)0xc1fd0114, 0x0);
out_be32((void *)0xc1fd0118, 0x01df0280);
/* Display timing init */
out_be32((void *)0xc1fd0004, 0x031f0000);
out_be32((void *)0xc1fd0008, 0x027f027f);
out_be32((void *)0xc1fd000c, 0x015f028f);
out_be32((void *)0xc1fd0010, 0x020c0000);
out_be32((void *)0xc1fd0014, 0x01df01ea);
out_be32((void *)0xc1fd0018, 0x0);
out_be32((void *)0xc1fd001c, 0x01e00280);
#if 1
/*
* Clear framebuffer using Lime's drawing engine
* (draw blue rect. with white border around it)
*/
/* Setup mode and fbbase, xres, fg, bg */
out_be32((void *)0xc1ff0420, 0x8300);
out_be32((void *)0xc1ff0440, 0x0000);
out_be32((void *)0xc1ff0444, 0x0280);
out_be32((void *)0xc1ff0480, 0x7fff);
out_be32((void *)0xc1ff0484, 0x0000);
/* Reset clipping rectangle */
out_be32((void *)0xc1ff0454, 0x0000);
out_be32((void *)0xc1ff0458, 0x0280);
out_be32((void *)0xc1ff045c, 0x0000);
out_be32((void *)0xc1ff0460, 0x01e0);
/* Draw white rect. */
out_be32((void *)0xc1ff04a0, 0x09410000);
out_be32((void *)0xc1ff04a0, 0x00000000);
out_be32((void *)0xc1ff04a0, 0x01e00280);
udelay(2000);
/* Draw blue rect. */
out_be32((void *)0xc1ff0480, 0x001f);
out_be32((void *)0xc1ff04a0, 0x09410000);
out_be32((void *)0xc1ff04a0, 0x00010001);
out_be32((void *)0xc1ff04a0, 0x01de027e);
#endif
/* Display enable, L0 layer */
out_be32((void *)0xc1fd0100, 0x80010f00);
/* TFT-LCD enable - PWM duty, lamp on */
out_be32((void *)0xc4000024, 0x64);
out_be32((void *)0xc4000020, 0x701);
return 0;
}

16
include/configs/lwmon5.h
View File

@ -341,14 +341,24 @@
* Graphics (Fujitsu Lime)
*----------------------------------------------------------------------*/
/* SDRAM Clock frequency adjustment register */
#define CFG_LIME_SDRAM_CLOCK 0xC1FC0000
/* Lime Clock frequency is to set 133MHz */
#define CFG_LIME_SDRAM_CLOCK 0xC1FC0038
/* Lime Clock frequency is to set 100MHz */
#define CFG_LIME_CLOCK_100MHZ 0x00000
#if 0
/* Lime Clock frequency for 133MHz */
#define CFG_LIME_CLOCK_133MHZ 0x10000
#endif
/* SDRAM Parameter register */
#define CFG_LIME_MMR 0xC1FCFFFC
/* SDRAM parameter value */
/* SDRAM parameter value; was 0x414FB7F2, caused several vertical bars
and pixel flare on display when 133MHz was configured. According to
SDRAM chip datasheet CAS Latency is 3 for 133MHz and -75 Speed Grade */
#ifdef CFG_LIME_CLOCK_133MHZ
#define CFG_LIME_MMR_VALUE 0x414FB7F3
#else
#define CFG_LIME_MMR_VALUE 0x414FB7F2
#endif
/*-----------------------------------------------------------------------
* GPIO Setup