sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

Merge branch 'master' of git://git.denx.de/u-boot-usb

This commit is contained in:
Tom Rini 2013-06-12 16:33:49 -04:00
parent 077becc345 c67b0e42a5
commit b7ab8b8ff0
16 changed files with 1650 additions and 47 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
README
View File

@ -1261,6 +1261,9 @@ The following options need to be configured:
CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the
txfilltuning field in the EHCI controller on reset.
CONFIG_USB_HUB_MIN_POWER_ON_DELAY defines the minimum
interval for usb hub power-on delay.(minimum 100msec)
- USB Device:
Define the below if you wish to use the USB console.
Once firmware is rebuilt from a serial console issue the

15
common/usb_hub.c
View File

@ -53,6 +53,10 @@
#include <asm/4xx_pci.h>
#endif
#ifndef CONFIG_USB_HUB_MIN_POWER_ON_DELAY
#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 100
#endif
#define USB_BUFSIZ 512
static struct usb_hub_device hub_dev[USB_MAX_HUB];
@ -148,8 +152,8 @@ static void usb_hub_power_on(struct usb_hub_device *hub)
debug("port %d returns %lX\n", i + 1, dev->status);
}
/* Wait at least 100 msec for power to become stable */
mdelay(max(pgood_delay, (unsigned)100));
/* Wait for power to become stable */
mdelay(max(pgood_delay, CONFIG_USB_HUB_MIN_POWER_ON_DELAY));
}
void usb_hub_reset(void)
@ -485,7 +489,11 @@ static int usb_hub_configure(struct usb_device *dev)
i + 1, portstatus);
usb_clear_port_feature(dev, i + 1,
USB_PORT_FEAT_C_ENABLE);
/*
* The following hack causes a ghost device problem
* to Faraday EHCI
*/
#ifndef CONFIG_USB_EHCI_FARADAY
/* EM interference sometimes causes bad shielded USB
* devices to be shutdown by the hub, this hack enables
* them again. Works at least with mouse driver */
@ -497,6 +505,7 @@ static int usb_hub_configure(struct usb_device *dev)
"re-enabling...\n", i + 1);
usb_hub_port_connect_change(dev, i);
}
#endif
}
if (portstatus & USB_PORT_STAT_SUSPEND) {
debug("port %d suspend change\n", i + 1);

10
common/usb_kbd.c
View File

@ -461,8 +461,13 @@ static int usb_kbd_probe(struct usb_device *dev, unsigned int ifnum)
usb_set_idle(dev, iface->desc.bInterfaceNumber, REPEAT_RATE, 0);
debug("USB KBD: enable interrupt pipe...\n");
usb_submit_int_msg(dev, pipe, data->new, maxp > 8 ? 8 : maxp,
ep->bInterval);
if (usb_submit_int_msg(dev, pipe, data->new, maxp > 8 ? 8 : maxp,
ep->bInterval) < 0) {
printf("Failed to get keyboard state from device %04x:%04x\n",
dev->descriptor.idVendor, dev->descriptor.idProduct);
/* Abort, we don't want to use that non-functional keyboard. */
return 0;
}
/* Success. */
return 1;
@ -496,6 +501,7 @@ int drv_usb_kbd_init(void)
if (old_dev) {
/* Already registered, just return ok. */
debug("USB KBD: is already registered.\n");
usb_kbd_deregister();
return 1;
}

44
drivers/usb/eth/asix.c
View File

@ -407,6 +407,25 @@ static int asix_basic_reset(struct ueth_data *dev)
rx_ctl = asix_read_rx_ctl(dev);
debug("RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
dev->phy_id = asix_get_phy_addr(dev);
if (dev->phy_id < 0)
debug("Failed to read phy id\n");
asix_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET);
asix_mdio_write(dev, dev->phy_id, MII_ADVERTISE,
ADVERTISE_ALL | ADVERTISE_CSMA);
mii_nway_restart(dev);
if (asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT) < 0)
return -1;
if (asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
AX88772_IPG2_DEFAULT, 0, NULL) < 0) {
debug("Write IPG,IPG1,IPG2 failed\n");
return -1;
}
return 0;
}
@ -422,31 +441,6 @@ static int asix_init(struct eth_device *eth, bd_t *bd)
debug("** %s()\n", __func__);
dev->phy_id = asix_get_phy_addr(dev);
if (dev->phy_id < 0)
debug("Failed to read phy id\n");
if (asix_sw_reset(dev, AX_SWRESET_PRL) < 0)
goto out_err;
if (asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL) < 0)
goto out_err;
asix_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET);
asix_mdio_write(dev, dev->phy_id, MII_ADVERTISE,
ADVERTISE_ALL | ADVERTISE_CSMA);
mii_nway_restart(dev);
if (asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT) < 0)
goto out_err;
if (asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
AX88772_IPG2_DEFAULT, 0, NULL) < 0) {
debug("Write IPG,IPG1,IPG2 failed\n");
goto out_err;
}
if (asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL) < 0)
goto out_err;

1
drivers/usb/gadget/Makefile
View File

@ -35,6 +35,7 @@ endif
# new USB gadget layer dependencies
ifdef CONFIG_USB_GADGET
COBJS-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o
COBJS-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o
COBJS-$(CONFIG_USBDOWNLOAD_GADGET) += g_dnl.o
COBJS-$(CONFIG_DFU_FUNCTION) += f_dfu.o
endif

1
drivers/usb/gadget/composite.c
View File

@ -1098,4 +1098,5 @@ void usb_composite_unregister(struct usb_composite_driver *driver)
if (composite != driver)
return;
usb_gadget_unregister_driver(&composite_driver);
composite = NULL;
}

3
drivers/usb/gadget/f_mass_storage.c
View File

@ -2261,7 +2261,8 @@ reset:
if (rc)
goto reset;
fsg->bulk_out_enabled = 1;
common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
common->bulk_out_maxpacket =
le16_to_cpu(get_unaligned(&d->wMaxPacketSize));
clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
/* Allocate the requests */

948
drivers/usb/gadget/fotg210.c Normal file
View File

@ -0,0 +1,948 @@
/*
* Faraday USB 2.0 OTG Controller
*
* (C) Copyright 2010 Faraday Technology
* Dante Su <dantesu@faraday-tech.com>
*
* This file is released under the terms of GPL v2 and any later version.
* See the file COPYING in the root directory of the source tree for details.
*/
#include <common.h>
#include <command.h>
#include <config.h>
#include <net.h>
#include <malloc.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <linux/types.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <usb/fotg210.h>
#define CFG_NUM_ENDPOINTS 4
#define CFG_EP0_MAX_PACKET_SIZE 64
#define CFG_EPX_MAX_PACKET_SIZE 512
#define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 2) /* 250 ms */
struct fotg210_chip;
struct fotg210_ep {
struct usb_ep ep;
uint maxpacket;
uint id;
uint stopped;
struct list_head queue;
struct fotg210_chip *chip;
const struct usb_endpoint_descriptor *desc;
};
struct fotg210_request {
struct usb_request req;
struct list_head queue;
struct fotg210_ep *ep;
};
struct fotg210_chip {
struct usb_gadget gadget;
struct usb_gadget_driver *driver;
struct fotg210_regs *regs;
uint8_t irq;
uint16_t addr;
int pullup;
enum usb_device_state state;
struct fotg210_ep ep[1 + CFG_NUM_ENDPOINTS];
};
static struct usb_endpoint_descriptor ep0_desc = {
.bLength = sizeof(struct usb_endpoint_descriptor),
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
};
static inline int fifo_to_ep(struct fotg210_chip *chip, int id, int in)
{
return (id < 0) ? 0 : ((id & 0x03) + 1);
}
static inline int ep_to_fifo(struct fotg210_chip *chip, int id)
{
return (id <= 0) ? -1 : ((id - 1) & 0x03);
}
static inline int ep_reset(struct fotg210_chip *chip, uint8_t ep_addr)
{
int ep = ep_addr & USB_ENDPOINT_NUMBER_MASK;
struct fotg210_regs *regs = chip->regs;
if (ep_addr & USB_DIR_IN) {
/* reset endpoint */
setbits_le32(&regs->iep[ep - 1], IEP_RESET);
mdelay(1);
clrbits_le32(&regs->iep[ep - 1], IEP_RESET);
/* clear endpoint stall */
clrbits_le32(&regs->iep[ep - 1], IEP_STALL);
} else {
/* reset endpoint */
setbits_le32(&regs->oep[ep - 1], OEP_RESET);
mdelay(1);
clrbits_le32(&regs->oep[ep - 1], OEP_RESET);
/* clear endpoint stall */
clrbits_le32(&regs->oep[ep - 1], OEP_STALL);
}
return 0;
}
static int fotg210_reset(struct fotg210_chip *chip)
{
struct fotg210_regs *regs = chip->regs;
uint32_t i;
chip->state = USB_STATE_POWERED;
/* chip enable */
writel(DEVCTRL_EN, &regs->dev_ctrl);
/* device address reset */
chip->addr = 0;
writel(0, &regs->dev_addr);
/* set idle counter to 7ms */
writel(7, &regs->idle);
/* disable all interrupts */
writel(IMR_MASK, &regs->imr);
writel(GIMR_MASK, &regs->gimr);
writel(GIMR0_MASK, &regs->gimr0);
writel(GIMR1_MASK, &regs->gimr1);
writel(GIMR2_MASK, &regs->gimr2);
/* clear interrupts */
writel(ISR_MASK, &regs->isr);
writel(0, &regs->gisr);
writel(0, &regs->gisr0);
writel(0, &regs->gisr1);
writel(0, &regs->gisr2);
/* chip reset */
setbits_le32(&regs->dev_ctrl, DEVCTRL_RESET);
mdelay(10);
if (readl(&regs->dev_ctrl) & DEVCTRL_RESET) {
printf("fotg210: chip reset failed\n");
return -1;
}
/* CX FIFO reset */
setbits_le32(&regs->cxfifo, CXFIFO_CXFIFOCLR);
mdelay(10);
if (readl(&regs->cxfifo) & CXFIFO_CXFIFOCLR) {
printf("fotg210: ep0 fifo reset failed\n");
return -1;
}
/* create static ep-fifo map (EP1 <-> FIFO0, EP2 <-> FIFO1 ...) */
writel(EPMAP14_DEFAULT, &regs->epmap14);
writel(EPMAP58_DEFAULT, &regs->epmap58);
writel(FIFOMAP_DEFAULT, &regs->fifomap);
writel(0, &regs->fifocfg);
for (i = 0; i < 8; ++i) {
writel(CFG_EPX_MAX_PACKET_SIZE, &regs->iep[i]);
writel(CFG_EPX_MAX_PACKET_SIZE, &regs->oep[i]);
}
/* FIFO reset */
for (i = 0; i < 4; ++i) {
writel(FIFOCSR_RESET, &regs->fifocsr[i]);
mdelay(10);
if (readl(&regs->fifocsr[i]) & FIFOCSR_RESET) {
printf("fotg210: fifo%d reset failed\n", i);
return -1;
}
}
/* enable only device interrupt and triggered at level-high */
writel(IMR_IRQLH | IMR_HOST | IMR_OTG, &regs->imr);
writel(ISR_MASK, &regs->isr);
/* disable EP0 IN/OUT interrupt */
writel(GIMR0_CXOUT | GIMR0_CXIN, &regs->gimr0);
/* disable EPX IN+SPK+OUT interrupts */
writel(GIMR1_MASK, &regs->gimr1);
/* disable wakeup+idle+dma+zlp interrupts */
writel(GIMR2_WAKEUP | GIMR2_IDLE | GIMR2_DMAERR | GIMR2_DMAFIN
| GIMR2_ZLPRX | GIMR2_ZLPTX, &regs->gimr2);
/* enable all group interrupt */
writel(0, &regs->gimr);
/* suspend delay = 3 ms */
writel(3, &regs->idle);
/* turn-on device interrupts */
setbits_le32(&regs->dev_ctrl, DEVCTRL_GIRQ_EN);
return 0;
}
static inline int fotg210_cxwait(struct fotg210_chip *chip, uint32_t mask)
{
struct fotg210_regs *regs = chip->regs;
int ret = -1;
ulong ts;
for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
if ((readl(&regs->cxfifo) & mask) != mask)
continue;
ret = 0;
break;
}
if (ret)
printf("fotg210: cx/ep0 timeout\n");
return ret;
}
static int fotg210_dma(struct fotg210_ep *ep, struct fotg210_request *req)
{
struct fotg210_chip *chip = ep->chip;
struct fotg210_regs *regs = chip->regs;
uint32_t tmp, ts;
uint8_t *buf = req->req.buf + req->req.actual;
uint32_t len = req->req.length - req->req.actual;
int fifo = ep_to_fifo(chip, ep->id);
int ret = -EBUSY;
/* 1. init dma buffer */
if (len > ep->maxpacket)
len = ep->maxpacket;
/* 2. wait for dma ready (hardware) */
for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
if (!(readl(&regs->dma_ctrl) & DMACTRL_START)) {
ret = 0;
break;
}
}
if (ret) {
printf("fotg210: dma busy\n");
req->req.status = ret;
return ret;
}
/* 3. DMA target setup */
if (ep->desc->bEndpointAddress & USB_DIR_IN)
flush_dcache_range((ulong)buf, (ulong)buf + len);
else
invalidate_dcache_range((ulong)buf, (ulong)buf + len);
writel(virt_to_phys(buf), &regs->dma_addr);
if (ep->desc->bEndpointAddress & USB_DIR_IN) {
if (ep->id == 0) {
/* Wait until cx/ep0 fifo empty */
fotg210_cxwait(chip, CXFIFO_CXFIFOE);
writel(DMAFIFO_CX, &regs->dma_fifo);
} else {
/* Wait until epx fifo empty */
fotg210_cxwait(chip, CXFIFO_FIFOE(fifo));
writel(DMAFIFO_FIFO(fifo), &regs->dma_fifo);
}
writel(DMACTRL_LEN(len) | DMACTRL_MEM2FIFO, &regs->dma_ctrl);
} else {
uint32_t blen;
if (ep->id == 0) {
writel(DMAFIFO_CX, &regs->dma_fifo);
do {
blen = CXFIFO_BYTES(readl(&regs->cxfifo));
} while (blen < len);
} else {
writel(DMAFIFO_FIFO(fifo), &regs->dma_fifo);
blen = FIFOCSR_BYTES(readl(&regs->fifocsr[fifo]));
}
len = (len < blen) ? len : blen;
writel(DMACTRL_LEN(len) | DMACTRL_FIFO2MEM, &regs->dma_ctrl);
}
/* 4. DMA start */
setbits_le32(&regs->dma_ctrl, DMACTRL_START);
/* 5. DMA wait */
ret = -EBUSY;
for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
tmp = readl(&regs->gisr2);
/* DMA complete */
if (tmp & GISR2_DMAFIN) {
ret = 0;
break;
}
/* DMA error */
if (tmp & GISR2_DMAERR) {
printf("fotg210: dma error\n");
break;
}
/* resume, suspend, reset */
if (tmp & (GISR2_RESUME | GISR2_SUSPEND | GISR2_RESET)) {
printf("fotg210: dma reset by host\n");
break;
}
}
/* 7. DMA target reset */
if (ret)
writel(DMACTRL_ABORT | DMACTRL_CLRFF, &regs->dma_ctrl);
writel(0, &regs->gisr2);
writel(0, &regs->dma_fifo);
req->req.status = ret;
if (!ret)
req->req.actual += len;
else
printf("fotg210: ep%d dma error(code=%d)\n", ep->id, ret);
return len;
}
/*
* result of setup packet
*/
#define CX_IDLE 0
#define CX_FINISH 1
#define CX_STALL 2
static void fotg210_setup(struct fotg210_chip *chip)
{
int id, ret = CX_IDLE;
uint32_t tmp[2];
struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)tmp;
struct fotg210_regs *regs = chip->regs;
/*
* If this is the first Cx 8 byte command,
* we can now query USB mode (high/full speed; USB 2.0/USB 1.0)
*/
if (chip->state == USB_STATE_POWERED) {
chip->state = USB_STATE_DEFAULT;
if (readl(&regs->otgcsr) & OTGCSR_DEV_B) {
/* Mini-B */
if (readl(&regs->dev_ctrl) & DEVCTRL_HS) {
puts("fotg210: HS\n");
chip->gadget.speed = USB_SPEED_HIGH;
/* SOF mask timer = 1100 ticks */
writel(SOFMTR_TMR(1100), &regs->sof_mtr);
} else {
puts("fotg210: FS\n");
chip->gadget.speed = USB_SPEED_FULL;
/* SOF mask timer = 10000 ticks */
writel(SOFMTR_TMR(10000), &regs->sof_mtr);
}
} else {
printf("fotg210: mini-A?\n");
}
}
/* switch data port to ep0 */
writel(DMAFIFO_CX, &regs->dma_fifo);
/* fetch 8 bytes setup packet */
tmp[0] = readl(&regs->ep0_data);
tmp[1] = readl(&regs->ep0_data);
/* release data port */
writel(0, &regs->dma_fifo);
if (req->bRequestType & USB_DIR_IN)
ep0_desc.bEndpointAddress = USB_DIR_IN;
else
ep0_desc.bEndpointAddress = USB_DIR_OUT;
ret = CX_IDLE;
if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
switch (req->bRequest) {
case USB_REQ_SET_CONFIGURATION:
debug("fotg210: set_cfg(%d)\n", req->wValue & 0x00FF);
if (!(req->wValue & 0x00FF)) {
chip->state = USB_STATE_ADDRESS;
writel(chip->addr, &regs->dev_addr);
} else {
chip->state = USB_STATE_CONFIGURED;
writel(chip->addr | DEVADDR_CONF,
&regs->dev_addr);
}
ret = CX_IDLE;
break;
case USB_REQ_SET_ADDRESS:
debug("fotg210: set_addr(0x%04X)\n", req->wValue);
chip->state = USB_STATE_ADDRESS;
chip->addr = req->wValue & DEVADDR_ADDR_MASK;
ret = CX_FINISH;
writel(chip->addr, &regs->dev_addr);
break;
case USB_REQ_CLEAR_FEATURE:
debug("fotg210: clr_feature(%d, %d)\n",
req->bRequestType & 0x03, req->wValue);
switch (req->wValue) {
case 0: /* [Endpoint] halt */
ep_reset(chip, req->wIndex);
ret = CX_FINISH;
break;
case 1: /* [Device] remote wake-up */
case 2: /* [Device] test mode */
default:
ret = CX_STALL;
break;
}
break;
case USB_REQ_SET_FEATURE:
debug("fotg210: set_feature(%d, %d)\n",
req->wValue, req->wIndex & 0xf);
switch (req->wValue) {
case 0: /* Endpoint Halt */
id = req->wIndex & 0xf;
setbits_le32(&regs->iep[id - 1], IEP_STALL);
setbits_le32(&regs->oep[id - 1], OEP_STALL);
ret = CX_FINISH;
break;
case 1: /* Remote Wakeup */
case 2: /* Test Mode */
default:
ret = CX_STALL;
break;
}
break;
case USB_REQ_GET_STATUS:
debug("fotg210: get_status\n");
ret = CX_STALL;
break;
case USB_REQ_SET_DESCRIPTOR:
debug("fotg210: set_descriptor\n");
ret = CX_STALL;
break;
case USB_REQ_SYNCH_FRAME:
debug("fotg210: sync frame\n");
ret = CX_STALL;
break;
}
} /* if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) */
if (ret == CX_IDLE && chip->driver->setup) {
if (chip->driver->setup(&chip->gadget, req) < 0)
ret = CX_STALL;
else
ret = CX_FINISH;
}
switch (ret) {
case CX_FINISH:
setbits_le32(&regs->cxfifo, CXFIFO_CXFIN);
break;
case CX_STALL:
setbits_le32(&regs->cxfifo, CXFIFO_CXSTALL | CXFIFO_CXFIN);
printf("fotg210: cx_stall!\n");
break;
case CX_IDLE:
debug("fotg210: cx_idle?\n");
default:
break;
}
}
/*
* fifo - FIFO id
* zlp - zero length packet
*/
static void fotg210_recv(struct fotg210_chip *chip, int ep_id)
{
struct fotg210_regs *regs = chip->regs;
struct fotg210_ep *ep = chip->ep + ep_id;
struct fotg210_request *req;
int len;
if (ep->stopped || (ep->desc->bEndpointAddress & USB_DIR_IN)) {
printf("fotg210: ep%d recv, invalid!\n", ep->id);
return;
}
if (list_empty(&ep->queue)) {
printf("fotg210: ep%d recv, drop!\n", ep->id);
return;
}
req = list_first_entry(&ep->queue, struct fotg210_request, queue);
len = fotg210_dma(ep, req);
if (len < ep->ep.maxpacket || req->req.length <= req->req.actual) {
list_del_init(&req->queue);
if (req->req.complete)
req->req.complete(&ep->ep, &req->req);
}
if (ep->id > 0 && list_empty(&ep->queue)) {
setbits_le32(&regs->gimr1,
GIMR1_FIFO_RX(ep_to_fifo(chip, ep->id)));
}
}
/*
* USB Gadget Layer
*/
static int fotg210_ep_enable(
struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
{
struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
struct fotg210_chip *chip = ep->chip;
struct fotg210_regs *regs = chip->regs;
int id = ep_to_fifo(chip, ep->id);
int in = (desc->bEndpointAddress & USB_DIR_IN) ? 1 : 0;
if (!_ep || !desc
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| le16_to_cpu(desc->wMaxPacketSize) == 0) {
printf("fotg210: bad ep or descriptor\n");
return -EINVAL;
}
ep->desc = desc;
ep->stopped = 0;
if (in)
setbits_le32(&regs->fifomap, FIFOMAP(id, FIFOMAP_IN));
switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
case USB_ENDPOINT_XFER_CONTROL:
return -EINVAL;
case USB_ENDPOINT_XFER_ISOC:
setbits_le32(&regs->fifocfg,
FIFOCFG(id, FIFOCFG_EN | FIFOCFG_ISOC));
break;
case USB_ENDPOINT_XFER_BULK:
setbits_le32(&regs->fifocfg,
FIFOCFG(id, FIFOCFG_EN | FIFOCFG_BULK));
break;
case USB_ENDPOINT_XFER_INT:
setbits_le32(&regs->fifocfg,
FIFOCFG(id, FIFOCFG_EN | FIFOCFG_INTR));
break;
}
return 0;
}
static int fotg210_ep_disable(struct usb_ep *_ep)
{
struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
struct fotg210_chip *chip = ep->chip;
struct fotg210_regs *regs = chip->regs;
int id = ep_to_fifo(chip, ep->id);
ep->desc = NULL;
ep->stopped = 1;
clrbits_le32(&regs->fifocfg, FIFOCFG(id, FIFOCFG_CFG_MASK));
clrbits_le32(&regs->fifomap, FIFOMAP(id, FIFOMAP_DIR_MASK));
return 0;
}
static struct usb_request *fotg210_ep_alloc_request(
struct usb_ep *_ep, gfp_t gfp_flags)
{
struct fotg210_request *req = malloc(sizeof(*req));
if (req) {
memset(req, 0, sizeof(*req));
INIT_LIST_HEAD(&req->queue);
}
return &req->req;
}
static void fotg210_ep_free_request(
struct usb_ep *_ep, struct usb_request *_req)
{
struct fotg210_request *req;
req = container_of(_req, struct fotg210_request, req);
free(req);
}
static int fotg210_ep_queue(
struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
{
struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
struct fotg210_chip *chip = ep->chip;
struct fotg210_regs *regs = chip->regs;
struct fotg210_request *req;
req = container_of(_req, struct fotg210_request, req);
if (!_req || !_req->complete || !_req->buf
|| !list_empty(&req->queue)) {
printf("fotg210: invalid request to ep%d\n", ep->id);
return -EINVAL;
}
if (!chip || chip->state == USB_STATE_SUSPENDED) {
printf("fotg210: request while chip suspended\n");
return -EINVAL;
}
req->req.actual = 0;
req->req.status = -EINPROGRESS;
if (req->req.length == 0) {
req->req.status = 0;
if (req->req.complete)
req->req.complete(&ep->ep, &req->req);
return 0;
}
if (ep->id == 0) {
do {
int len = fotg210_dma(ep, req);
if (len < ep->ep.maxpacket)
break;
if (ep->desc->bEndpointAddress & USB_DIR_IN)
udelay(100);
} while (req->req.length > req->req.actual);
} else {
if (ep->desc->bEndpointAddress & USB_DIR_IN) {
do {
int len = fotg210_dma(ep, req);
if (len < ep->ep.maxpacket)
break;
} while (req->req.length > req->req.actual);
} else {
list_add_tail(&req->queue, &ep->queue);
clrbits_le32(&regs->gimr1,
GIMR1_FIFO_RX(ep_to_fifo(chip, ep->id)));
}
}
if (ep->id == 0 || (ep->desc->bEndpointAddress & USB_DIR_IN)) {
if (req->req.complete)
req->req.complete(&ep->ep, &req->req);
}
return 0;
}
static int fotg210_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
{
struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
struct fotg210_request *req;
/* make sure it's actually queued on this endpoint */
list_for_each_entry(req, &ep->queue, queue) {
if (&req->req == _req)
break;
}
if (&req->req != _req)
return -EINVAL;
/* remove the request */
list_del_init(&req->queue);
/* update status & invoke complete callback */
if (req->req.status == -EINPROGRESS) {
req->req.status = -ECONNRESET;
if (req->req.complete)
req->req.complete(_ep, &req->req);
}
return 0;
}
static int fotg210_ep_halt(struct usb_ep *_ep, int halt)
{
struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep);
struct fotg210_chip *chip = ep->chip;
struct fotg210_regs *regs = chip->regs;
int ret = -1;
debug("fotg210: ep%d halt=%d\n", ep->id, halt);
/* Endpoint STALL */
if (ep->id > 0 && ep->id <= CFG_NUM_ENDPOINTS) {
if (halt) {
/* wait until all ep fifo empty */
fotg210_cxwait(chip, 0xf00);
/* stall */
if (ep->desc->bEndpointAddress & USB_DIR_IN) {
setbits_le32(&regs->iep[ep->id - 1],
IEP_STALL);
} else {
setbits_le32(&regs->oep[ep->id - 1],
OEP_STALL);
}
} else {
if (ep->desc->bEndpointAddress & USB_DIR_IN) {
clrbits_le32(&regs->iep[ep->id - 1],
IEP_STALL);
} else {
clrbits_le32(&regs->oep[ep->id - 1],
OEP_STALL);
}
}
ret = 0;
}
return ret;
}
/*
* activate/deactivate link with host.
*/
static void pullup(struct fotg210_chip *chip, int is_on)
{
struct fotg210_regs *regs = chip->regs;
if (is_on) {
if (!chip->pullup) {
chip->state = USB_STATE_POWERED;
chip->pullup = 1;
/* enable the chip */
setbits_le32(&regs->dev_ctrl, DEVCTRL_EN);
/* clear unplug bit (BIT0) */
clrbits_le32(&regs->phy_tmsr, PHYTMSR_UNPLUG);
}
} else {
chip->state = USB_STATE_NOTATTACHED;
chip->pullup = 0;
chip->addr = 0;
writel(chip->addr, &regs->dev_addr);
/* set unplug bit (BIT0) */
setbits_le32(&regs->phy_tmsr, PHYTMSR_UNPLUG);
/* disable the chip */
clrbits_le32(&regs->dev_ctrl, DEVCTRL_EN);
}
}
static int fotg210_pullup(struct usb_gadget *_gadget, int is_on)
{
struct fotg210_chip *chip;
chip = container_of(_gadget, struct fotg210_chip, gadget);
debug("fotg210: pullup=%d\n", is_on);
pullup(chip, is_on);
return 0;
}
static int fotg210_get_frame(struct usb_gadget *_gadget)
{
struct fotg210_chip *chip;
struct fotg210_regs *regs;
chip = container_of(_gadget, struct fotg210_chip, gadget);
regs = chip->regs;
return SOFFNR_FNR(readl(&regs->sof_fnr));
}
static struct usb_gadget_ops fotg210_gadget_ops = {
.get_frame = fotg210_get_frame,
.pullup = fotg210_pullup,
};
static struct usb_ep_ops fotg210_ep_ops = {
.enable = fotg210_ep_enable,
.disable = fotg210_ep_disable,
.queue = fotg210_ep_queue,
.dequeue = fotg210_ep_dequeue,
.set_halt = fotg210_ep_halt,
.alloc_request = fotg210_ep_alloc_request,
.free_request = fotg210_ep_free_request,
};
static struct fotg210_chip controller = {
.regs = (void __iomem *)CONFIG_FOTG210_BASE,
.gadget = {
.name = "fotg210_udc",
.ops = &fotg210_gadget_ops,
.ep0 = &controller.ep[0].ep,
.speed = USB_SPEED_UNKNOWN,
.is_dualspeed = 1,
.is_otg = 0,
.is_a_peripheral = 0,
.b_hnp_enable = 0,
.a_hnp_support = 0,
.a_alt_hnp_support = 0,
},
.ep[0] = {
.id = 0,
.ep = {
.name = "ep0",
.ops = &fotg210_ep_ops,
},
.desc = &ep0_desc,
.chip = &controller,
.maxpacket = CFG_EP0_MAX_PACKET_SIZE,
},
.ep[1] = {
.id = 1,
.ep = {
.name = "ep1",
.ops = &fotg210_ep_ops,
},
.chip = &controller,
.maxpacket = CFG_EPX_MAX_PACKET_SIZE,
},
.ep[2] = {
.id = 2,
.ep = {
.name = "ep2",
.ops = &fotg210_ep_ops,
},
.chip = &controller,
.maxpacket = CFG_EPX_MAX_PACKET_SIZE,
},
.ep[3] = {
.id = 3,
.ep = {
.name = "ep3",
.ops = &fotg210_ep_ops,
},
.chip = &controller,
.maxpacket = CFG_EPX_MAX_PACKET_SIZE,
},
.ep[4] = {
.id = 4,
.ep = {
.name = "ep4",
.ops = &fotg210_ep_ops,
},
.chip = &controller,
.maxpacket = CFG_EPX_MAX_PACKET_SIZE,
},
};
int usb_gadget_handle_interrupts(void)
{
struct fotg210_chip *chip = &controller;
struct fotg210_regs *regs = chip->regs;
uint32_t id, st, isr, gisr;
isr = readl(&regs->isr) & (~readl(&regs->imr));
gisr = readl(&regs->gisr) & (~readl(&regs->gimr));
if (!(isr & ISR_DEV) || !gisr)
return 0;
writel(ISR_DEV, &regs->isr);
/* CX interrupts */
if (gisr & GISR_GRP0) {
st = readl(&regs->gisr0);
writel(0, &regs->gisr0);
if (st & GISR0_CXERR)
printf("fotg210: cmd error\n");
if (st & GISR0_CXABORT)
printf("fotg210: cmd abort\n");
if (st & GISR0_CXSETUP) /* setup */
fotg210_setup(chip);
else if (st & GISR0_CXEND) /* command finish */
setbits_le32(&regs->cxfifo, CXFIFO_CXFIN);
}
/* FIFO interrupts */
if (gisr & GISR_GRP1) {
st = readl(&regs->gisr1);
for (id = 0; id < 4; ++id) {
if (st & GISR1_RX_FIFO(id))
fotg210_recv(chip, fifo_to_ep(chip, id, 0));
}
}
/* Device Status Interrupts */
if (gisr & GISR_GRP2) {
st = readl(&regs->gisr2);
writel(0, &regs->gisr2);
if (st & GISR2_RESET)
printf("fotg210: reset by host\n");
else if (st & GISR2_SUSPEND)
printf("fotg210: suspend/removed\n");
else if (st & GISR2_RESUME)
printf("fotg210: resume\n");
/* Errors */
if (st & GISR2_ISOCERR)
printf("fotg210: iso error\n");
if (st & GISR2_ISOCABT)
printf("fotg210: iso abort\n");
if (st & GISR2_DMAERR)
printf("fotg210: dma error\n");
}
return 0;
}
int usb_gadget_register_driver(struct usb_gadget_driver *driver)
{
int i, ret = 0;
struct fotg210_chip *chip = &controller;
if (!driver || !driver->bind || !driver->setup) {
puts("fotg210: bad parameter.\n");
return -EINVAL;
}
INIT_LIST_HEAD(&chip->gadget.ep_list);
for (i = 0; i < CFG_NUM_ENDPOINTS + 1; ++i) {
struct fotg210_ep *ep = chip->ep + i;
ep->ep.maxpacket = ep->maxpacket;
INIT_LIST_HEAD(&ep->queue);
if (ep->id == 0) {
ep->stopped = 0;
} else {
ep->stopped = 1;
list_add_tail(&ep->ep.ep_list, &chip->gadget.ep_list);
}
}
if (fotg210_reset(chip)) {
puts("fotg210: reset failed.\n");
return -EINVAL;
}
ret = driver->bind(&chip->gadget);
if (ret) {
debug("fotg210: driver->bind() returned %d\n", ret);
return ret;
}
chip->driver = driver;
return ret;
}
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
{
struct fotg210_chip *chip = &controller;
driver->unbind(&chip->gadget);
chip->driver = NULL;
pullup(chip, 0);
return 0;
}

8
drivers/usb/gadget/gadget_chips.h
View File

@ -150,6 +150,12 @@
#define gadget_is_mv(g) 0
#endif
#ifdef CONFIG_USB_GADGET_FOTG210
#define gadget_is_fotg210(g) (!strcmp("fotg210_udc", (g)->name))
#else
#define gadget_is_fotg210(g) 0
#endif
/*
* CONFIG_USB_GADGET_SX2
* CONFIG_USB_GADGET_AU1X00
@ -215,5 +221,7 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
return 0x20;
else if (gadget_is_mv(gadget))
return 0x21;
else if (gadget_is_fotg210(gadget))
return 0x22;
return -ENOENT;
}

13
drivers/usb/gadget/pxa25x_udc.c
View File

@ -314,7 +314,8 @@ static int pxa25x_ep_enable(struct usb_ep *_ep,
if (!_ep || !desc || ep->desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| ep->bEndpointAddress != desc->bEndpointAddress
|| ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) {
|| ep->fifo_size <
le16_to_cpu(get_unaligned(&desc->wMaxPacketSize))) {
printf("%s, bad ep or descriptor\n", __func__);
return -EINVAL;
}
@ -329,9 +330,9 @@ static int pxa25x_ep_enable(struct usb_ep *_ep,
/* hardware _could_ do smaller, but driver doesn't */
if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
&& le16_to_cpu(desc->wMaxPacketSize)
&& le16_to_cpu(get_unaligned(&desc->wMaxPacketSize))
!= BULK_FIFO_SIZE)
|| !desc->wMaxPacketSize) {
|| !get_unaligned(&desc->wMaxPacketSize)) {
printf("%s, bad %s maxpacket\n", __func__, _ep->name);
return -ERANGE;
}
@ -345,7 +346,7 @@ static int pxa25x_ep_enable(struct usb_ep *_ep,
ep->desc = desc;
ep->stopped = 0;
ep->pio_irqs = 0;
ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
ep->ep.maxpacket = le16_to_cpu(get_unaligned(&desc->wMaxPacketSize));
/* flush fifo (mostly for OUT buffers) */
pxa25x_ep_fifo_flush(_ep);
@ -485,7 +486,7 @@ write_fifo(struct pxa25x_ep *ep, struct pxa25x_request *req)
{
unsigned max;
max = le16_to_cpu(ep->desc->wMaxPacketSize);
max = le16_to_cpu(get_unaligned(&ep->desc->wMaxPacketSize));
do {
unsigned count;
int is_last, is_short;
@ -766,7 +767,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
*/
if (unlikely(ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
&& req->req.length >
le16_to_cpu(ep->desc->wMaxPacketSize)))
le16_to_cpu(get_unaligned(&ep->desc->wMaxPacketSize))))
return -EMSGSIZE;
debug_cond(NOISY, "%s queue req %p, len %d buf %p\n",

1
drivers/usb/host/Makefile
View File

@ -43,6 +43,7 @@ COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-mpc512x.o
else
COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
endif
COBJS-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o
COBJS-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
COBJS-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
COBJS-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o

148
drivers/usb/host/ehci-faraday.c Normal file
View File

@ -0,0 +1,148 @@
/*
* Faraday USB 2.0 EHCI Controller
*
* (C) Copyright 2010 Faraday Technology
* Dante Su <dantesu@faraday-tech.com>
*
* This file is released under the terms of GPL v2 and any later version.
* See the file COPYING in the root directory of the source tree for details.
*/
#include <common.h>
#include <asm/io.h>
#include <usb.h>
#include <usb/fusbh200.h>
#include <usb/fotg210.h>
#include "ehci.h"
#ifndef CONFIG_USB_EHCI_BASE_LIST
#define CONFIG_USB_EHCI_BASE_LIST { CONFIG_USB_EHCI_BASE }
#endif
union ehci_faraday_regs {
struct fusbh200_regs usb;
struct fotg210_regs otg;
};
static inline int ehci_is_fotg2xx(union ehci_faraday_regs *regs)
{
return !readl(&regs->usb.easstr);
}
/*
* Create the appropriate control structures to manage
* a new EHCI host controller.
*/
int ehci_hcd_init(int index, struct ehci_hccr **ret_hccr,
struct ehci_hcor **ret_hcor)
{
struct ehci_hccr *hccr;
struct ehci_hcor *hcor;
union ehci_faraday_regs *regs;
uint32_t base_list[] = CONFIG_USB_EHCI_BASE_LIST;
if (index < 0 || index >= ARRAY_SIZE(base_list))
return -1;
regs = (void __iomem *)base_list[index];
hccr = (struct ehci_hccr *)&regs->usb.hccr;
hcor = (struct ehci_hcor *)&regs->usb.hcor;
if (ehci_is_fotg2xx(regs)) {
/* A-device bus reset */
/* ... Power off A-device */
setbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSDROP);
/* ... Drop vbus and bus traffic */
clrbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSREQ);
mdelay(1);
/* ... Power on A-device */
clrbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSDROP);
/* ... Drive vbus and bus traffic */
setbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSREQ);
mdelay(1);
/* Disable OTG & DEV interrupts, triggered at level-high */
writel(IMR_IRQLH | IMR_OTG | IMR_DEV, &regs->otg.imr);
/* Clear all interrupt status */
writel(ISR_HOST | ISR_OTG | ISR_DEV, &regs->otg.isr);
} else {
/* Interrupt=level-high */
setbits_le32(&regs->usb.bmcsr, BMCSR_IRQLH);
/* VBUS on */
clrbits_le32(&regs->usb.bmcsr, BMCSR_VBUS_OFF);
/* Disable all interrupts */
writel(0x00, &regs->usb.bmier);
writel(0x1f, &regs->usb.bmisr);
}
*ret_hccr = hccr;
*ret_hcor = hcor;
return 0;
}
/*
* Destroy the appropriate control structures corresponding
* the the EHCI host controller.
*/
int ehci_hcd_stop(int index)
{
return 0;
}
/*
* This ehci_set_usbmode() overrides the weak function
* in "ehci-hcd.c".
*/
void ehci_set_usbmode(int index)
{
/* nothing needs to be done */
}
/*
* This ehci_get_port_speed() overrides the weak function
* in "ehci-hcd.c".
*/
int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg)
{
int spd, ret = PORTSC_PSPD_HS;
union ehci_faraday_regs *regs = (void __iomem *)((ulong)hcor - 0x10);
if (ehci_is_fotg2xx(regs))
spd = OTGCSR_SPD(readl(&regs->otg.otgcsr));
else
spd = BMCSR_SPD(readl(&regs->usb.bmcsr));
switch (spd) {
case 0: /* full speed */
ret = PORTSC_PSPD_FS;
break;
case 1: /* low speed */
ret = PORTSC_PSPD_LS;
break;
case 2: /* high speed */
ret = PORTSC_PSPD_HS;
break;
default:
printf("ehci-faraday: invalid device speed\n");
break;
}
return ret;
}
/*
* This ehci_get_portsc_register() overrides the weak function
* in "ehci-hcd.c".
*/
uint32_t *ehci_get_portsc_register(struct ehci_hcor *hcor, int port)
{
/* Faraday EHCI has one and only one portsc register */
if (port) {
/* Printing the message would cause a scan failure! */
debug("The request port(%d) is not configured\n", port);
return NULL;
}
/* Faraday EHCI PORTSC register offset is 0x20 from hcor */
return (uint32_t *)((uint8_t *)hcor + 0x20);
}

74
drivers/usb/host/ehci-hcd.c
View File

@ -589,10 +589,12 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(token);
} else {
dev->act_len = 0;
#ifndef CONFIG_USB_EHCI_FARADAY
debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n",
dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts),
ehci_readl(&ctrl->hcor->or_portsc[0]),
ehci_readl(&ctrl->hcor->or_portsc[1]));
#endif
}
free(qtd);
@ -603,6 +605,17 @@ fail:
return -1;
}
__weak uint32_t *ehci_get_portsc_register(struct ehci_hcor *hcor, int port)
{
if (port < 0 || port >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
/* Printing the message would cause a scan failure! */
debug("The request port(%u) is not configured\n", port);
return NULL;
}
return (uint32_t *)&hcor->or_portsc[port];
}
int
ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
int length, struct devrequest *req)
@ -616,11 +629,6 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
int port = le16_to_cpu(req->index) & 0xff;
struct ehci_ctrl *ctrl = dev->controller;
if (port > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
printf("The request port(%d) is not configured\n", port - 1);
return -1;
}
status_reg = (uint32_t *)&ctrl->hcor->or_portsc[port - 1];
srclen = 0;
debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n",
@ -630,6 +638,19 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
typeReq = req->request | req->requesttype << 8;
switch (typeReq) {
case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8):
case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
status_reg = ehci_get_portsc_register(ctrl->hcor, port - 1);
if (!status_reg)
return -1;
break;
default:
status_reg = NULL;
break;
}
switch (typeReq) {
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
switch (le16_to_cpu(req->value) >> 8) {
@ -809,21 +830,23 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
break;
case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
reg = ehci_readl(status_reg);
reg &= ~EHCI_PS_CLEAR;
switch (le16_to_cpu(req->value)) {
case USB_PORT_FEAT_ENABLE:
reg &= ~EHCI_PS_PE;
break;
case USB_PORT_FEAT_C_ENABLE:
reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_PE;
reg |= EHCI_PS_PE;
break;
case USB_PORT_FEAT_POWER:
if (HCS_PPC(ehci_readl(&ctrl->hccr->cr_hcsparams)))
reg = reg & ~(EHCI_PS_CLEAR | EHCI_PS_PP);
reg &= ~EHCI_PS_PP;
break;
case USB_PORT_FEAT_C_CONNECTION:
reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_CSC;
reg |= EHCI_PS_CSC;
break;
case USB_PORT_FEAT_OVER_CURRENT:
reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC;
reg |= EHCI_PS_OCC;
break;
case USB_PORT_FEAT_C_RESET:
ctrl->portreset &= ~(1 << port);
@ -903,6 +926,9 @@ int usb_lowlevel_init(int index, void **controller)
qh_list->qh_overlay.qt_token =
cpu_to_hc32(QT_TOKEN_STATUS(QT_TOKEN_STATUS_HALTED));
flush_dcache_range((uint32_t)qh_list,
ALIGN_END_ADDR(struct QH, qh_list, 1));
/* Set async. queue head pointer. */
ehci_writel(&ehcic[index].hcor->or_asynclistaddr, (uint32_t)qh_list);
@ -916,6 +942,9 @@ int usb_lowlevel_init(int index, void **controller)
periodic->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
periodic->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
flush_dcache_range((uint32_t)periodic,
ALIGN_END_ADDR(struct QH, periodic, 1));
/*
* Step 2: Setup frame-list: Every microframe, USB tries the same list.
* In particular, device specifications on polling frequency
@ -933,6 +962,10 @@ int usb_lowlevel_init(int index, void **controller)
| QH_LINK_TYPE_QH;
}
flush_dcache_range((uint32_t)ehcic[index].periodic_list,
ALIGN_END_ADDR(uint32_t, ehcic[index].periodic_list,
1024));
/* Set periodic list base address */
ehci_writel(&ehcic[index].hcor->or_periodiclistbase,
(uint32_t)ehcic[index].periodic_list);
@ -959,10 +992,13 @@ int usb_lowlevel_init(int index, void **controller)
cmd |= CMD_RUN;
ehci_writel(&ehcic[index].hcor->or_usbcmd, cmd);
#ifndef CONFIG_USB_EHCI_FARADAY
/* take control over the ports */
cmd = ehci_readl(&ehcic[index].hcor->or_configflag);
cmd |= FLAG_CF;
ehci_writel(&ehcic[index].hcor->or_configflag, cmd);
#endif
/* unblock posted write */
cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd);
mdelay(5);
@ -1144,6 +1180,16 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize,
*buf = buffer + i * elementsize;
}
flush_dcache_range((uint32_t)buffer,
ALIGN_END_ADDR(char, buffer,
queuesize * elementsize));
flush_dcache_range((uint32_t)result->first,
ALIGN_END_ADDR(struct QH, result->first,
queuesize));
flush_dcache_range((uint32_t)result->tds,
ALIGN_END_ADDR(struct qTD, result->tds,
queuesize));
if (disable_periodic(ctrl) < 0) {
debug("FATAL: periodic should never fail, but did");
goto fail3;
@ -1154,6 +1200,11 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize,
result->last->qh_link = list->qh_link;
list->qh_link = (uint32_t)result->first | QH_LINK_TYPE_QH;
flush_dcache_range((uint32_t)result->last,
ALIGN_END_ADDR(struct QH, result->last, 1));
flush_dcache_range((uint32_t)list,
ALIGN_END_ADDR(struct QH, list, 1));
if (enable_periodic(ctrl) < 0) {
debug("FATAL: periodic should never fail, but did");
goto fail3;
@ -1184,6 +1235,8 @@ void *poll_int_queue(struct usb_device *dev, struct int_queue *queue)
return NULL;
}
/* still active */
invalidate_dcache_range((uint32_t)cur,
ALIGN_END_ADDR(struct QH, cur, 1));
if (cur->qh_overlay.qt_token & 0x80) {
debug("Exit poll_int_queue with no completed intr transfer. "
"token is %x\n", cur->qh_overlay.qt_token);
@ -1290,6 +1343,9 @@ submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
return -EINVAL;
}
invalidate_dcache_range((uint32_t)buffer,
ALIGN_END_ADDR(char, buffer, length));
ret = destroy_int_queue(dev, queue);
if (ret < 0)
return ret;

3
include/linux/usb/ch9.h
View File

@ -35,6 +35,7 @@
#include <linux/types.h> /* __u8 etc */
#include <asm/byteorder.h> /* le16_to_cpu */
#include <asm/unaligned.h> /* get_unaligned() */
/*-------------------------------------------------------------------------*/
@ -596,7 +597,7 @@ static inline int usb_endpoint_is_isoc_out(
*/
static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
{
return __le16_to_cpu(epd->wMaxPacketSize);
return __le16_to_cpu(get_unaligned(&epd->wMaxPacketSize));
}
static inline int usb_endpoint_interrupt_type(

364
include/usb/fotg210.h Normal file
View File

@ -0,0 +1,364 @@
/*
* Faraday USB 2.0 OTG Controller
*
* (C) Copyright 2010 Faraday Technology
* Dante Su <dantesu@faraday-tech.com>
*
* This file is released under the terms of GPL v2 and any later version.
* See the file COPYING in the root directory of the source tree for details.
*/
#ifndef _FOTG210_H
#define _FOTG210_H
struct fotg210_regs {
/* USB Host Controller */
struct {
uint32_t data[4];
} hccr; /* 0x00 - 0x0f: hccr */
struct {
uint32_t data[9];
} hcor; /* 0x10 - 0x33: hcor */
uint32_t rsvd1[3];
uint32_t miscr; /* 0x40: Miscellaneous Register */
uint32_t rsvd2[15];
/* USB OTG Controller */
uint32_t otgcsr;/* 0x80: OTG Control Status Register */
uint32_t otgisr;/* 0x84: OTG Interrupt Status Register */
uint32_t otgier;/* 0x88: OTG Interrupt Enable Register */
uint32_t rsvd3[13];
uint32_t isr; /* 0xC0: Global Interrupt Status Register */
uint32_t imr; /* 0xC4: Global Interrupt Mask Register */
uint32_t rsvd4[14];
/* USB Device Controller */
uint32_t dev_ctrl;/* 0x100: Device Control Register */
uint32_t dev_addr;/* 0x104: Device Address Register */
uint32_t dev_test;/* 0x108: Device Test Register */
uint32_t sof_fnr; /* 0x10c: SOF Frame Number Register */
uint32_t sof_mtr; /* 0x110: SOF Mask Timer Register */
uint32_t phy_tmsr;/* 0x114: PHY Test Mode Selector Register */
uint32_t rsvd5[2];
uint32_t cxfifo;/* 0x120: CX FIFO Register */
uint32_t idle; /* 0x124: IDLE Counter Register */
uint32_t rsvd6[2];
uint32_t gimr; /* 0x130: Group Interrupt Mask Register */
uint32_t gimr0; /* 0x134: Group Interrupt Mask Register 0 */
uint32_t gimr1; /* 0x138: Group Interrupt Mask Register 1 */
uint32_t gimr2; /* 0x13c: Group Interrupt Mask Register 2 */
uint32_t gisr; /* 0x140: Group Interrupt Status Register */
uint32_t gisr0; /* 0x144: Group Interrupt Status Register 0 */
uint32_t gisr1; /* 0x148: Group Interrupt Status Register 1 */
uint32_t gisr2; /* 0x14c: Group Interrupt Status Register 2 */
uint32_t rxzlp; /* 0x150: Receive Zero-Length-Packet Register */
uint32_t txzlp; /* 0x154: Transfer Zero-Length-Packet Register */
uint32_t isoeasr;/* 0x158: ISOC Error/Abort Status Register */
uint32_t rsvd7[1];
uint32_t iep[8]; /* 0x160 - 0x17f: IN Endpoint Register */
uint32_t oep[8]; /* 0x180 - 0x19f: OUT Endpoint Register */
uint32_t epmap14;/* 0x1a0: Endpoint Map Register (EP1 ~ 4) */
uint32_t epmap58;/* 0x1a4: Endpoint Map Register (EP5 ~ 8) */
uint32_t fifomap;/* 0x1a8: FIFO Map Register */
uint32_t fifocfg; /* 0x1ac: FIFO Configuration Register */
uint32_t fifocsr[4];/* 0x1b0 - 0x1bf: FIFO Control Status Register */
uint32_t dma_fifo; /* 0x1c0: DMA Target FIFO Register */
uint32_t rsvd8[1];
uint32_t dma_ctrl; /* 0x1c8: DMA Control Register */
uint32_t dma_addr; /* 0x1cc: DMA Address Register */
uint32_t ep0_data; /* 0x1d0: EP0 Setup Packet PIO Register */
};
/* Miscellaneous Register */
#define MISCR_SUSPEND (1 << 6) /* Put transceiver in suspend mode */
#define MISCR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */
#define MISCR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */
#define MISCR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
/* OTG Control Status Register */
#define OTGCSR_SPD_HIGH (2 << 22) /* Speed of the attached device (host) */
#define OTGCSR_SPD_LOW (1 << 22)
#define OTGCSR_SPD_FULL (0 << 22)
#define OTGCSR_SPD_MASK (3 << 22)
#define OTGCSR_SPD_SHIFT 22
#define OTGCSR_SPD(x) (((x) >> 22) & 0x03)
#define OTGCSR_DEV_A (0 << 21) /* Acts as A-device */
#define OTGCSR_DEV_B (1 << 21) /* Acts as B-device */
#define OTGCSR_ROLE_H (0 << 20) /* Acts as Host */
#define OTGCSR_ROLE_D (1 << 20) /* Acts as Device */
#define OTGCSR_A_VBUS_VLD (1 << 19) /* A-device VBUS Valid */
#define OTGCSR_A_SESS_VLD (1 << 18) /* A-device Session Valid */
#define OTGCSR_B_SESS_VLD (1 << 17) /* B-device Session Valid */
#define OTGCSR_B_SESS_END (1 << 16) /* B-device Session End */
#define OTGCSR_HFT_LONG (1 << 11) /* HDISCON noise filter = 270 us*/
#define OTGCSR_HFT (0 << 11) /* HDISCON noise filter = 135 us*/
#define OTGCSR_VFT_LONG (1 << 10) /* VBUS noise filter = 472 us*/
#define OTGCSR_VFT (0 << 10) /* VBUS noise filter = 135 us*/
#define OTGCSR_IDFT_LONG (1 << 9) /* ID noise filter = 4 ms*/
#define OTGCSR_IDFT (0 << 9) /* ID noise filter = 3 ms*/
#define OTGCSR_A_SRPR_VBUS (0 << 8) /* A-device: SRP responds to VBUS */
#define OTGCSR_A_SRPR_DATA (1 << 8) /* A-device: SRP responds to DATA-LINE */
#define OTGCSR_A_SRP_EN (1 << 7) /* A-device SRP detection enabled */
#define OTGCSR_A_HNP (1 << 6) /* Set role=A-device with HNP enabled */
#define OTGCSR_A_BUSDROP (1 << 5) /* A-device drop bus (power-down) */
#define OTGCSR_A_BUSREQ (1 << 4) /* A-device request bus */
#define OTGCSR_B_VBUS_DISC (1 << 2) /* B-device discharges VBUS */
#define OTGCSR_B_HNP (1 << 1) /* B-device enable HNP */
#define OTGCSR_B_BUSREQ (1 << 0) /* B-device request bus */
/* OTG Interrupt Status Register */
#define OTGISR_APRM (1 << 12) /* Mini-A plug removed */
#define OTGISR_BPRM (1 << 11) /* Mini-B plug removed */
#define OTGISR_OVD (1 << 10) /* over-current detected */
#define OTGISR_IDCHG (1 << 9) /* ID(A/B) changed */
#define OTGISR_RLCHG (1 << 8) /* Role(Host/Device) changed */
#define OTGISR_BSESSEND (1 << 6) /* B-device Session End */
#define OTGISR_AVBUSERR (1 << 5) /* A-device VBUS Error */
#define OTGISR_ASRP (1 << 4) /* A-device SRP detected */
#define OTGISR_BSRP (1 << 0) /* B-device SRP complete */
/* OTG Interrupt Enable Register */
#define OTGIER_APRM (1 << 12) /* Mini-A plug removed */
#define OTGIER_BPRM (1 << 11) /* Mini-B plug removed */
#define OTGIER_OVD (1 << 10) /* over-current detected */
#define OTGIER_IDCHG (1 << 9) /* ID(A/B) changed */
#define OTGIER_RLCHG (1 << 8) /* Role(Host/Device) changed */
#define OTGIER_BSESSEND (1 << 6) /* B-device Session End */
#define OTGIER_AVBUSERR (1 << 5) /* A-device VBUS Error */
#define OTGIER_ASRP (1 << 4) /* A-device SRP detected */
#define OTGIER_BSRP (1 << 0) /* B-device SRP complete */
/* Global Interrupt Status Register (W1C) */
#define ISR_HOST (1 << 2) /* USB Host interrupt */
#define ISR_OTG (1 << 1) /* USB OTG interrupt */
#define ISR_DEV (1 << 0) /* USB Device interrupt */
#define ISR_MASK 0x07
/* Global Interrupt Mask Register */
#define IMR_IRQLH (1 << 3) /* Interrupt triggered at level-high */
#define IMR_IRQLL (0 << 3) /* Interrupt triggered at level-low */
#define IMR_HOST (1 << 2) /* USB Host interrupt */
#define IMR_OTG (1 << 1) /* USB OTG interrupt */
#define IMR_DEV (1 << 0) /* USB Device interrupt */
#define IMR_MASK 0x0f
/* Device Control Register */
#define DEVCTRL_FS_FORCED (1 << 9) /* Forced to be Full-Speed Mode */
#define DEVCTRL_HS (1 << 6) /* High Speed Mode */
#define DEVCTRL_FS (0 << 6) /* Full Speed Mode */
#define DEVCTRL_EN (1 << 5) /* Chip Enable */
#define DEVCTRL_RESET (1 << 4) /* Chip Software Reset */
#define DEVCTRL_SUSPEND (1 << 3) /* Enter Suspend Mode */
#define DEVCTRL_GIRQ_EN (1 << 2) /* Global Interrupt Enabled */
#define DEVCTRL_HALFSPD (1 << 1) /* Half speed mode for FPGA test */
#define DEVCTRL_RWAKEUP (1 << 0) /* Enable remote wake-up */
/* Device Address Register */
#define DEVADDR_CONF (1 << 7) /* SET_CONFIGURATION has been executed */
#define DEVADDR_ADDR(x) ((x) & 0x7f)
#define DEVADDR_ADDR_MASK 0x7f
/* Device Test Register */
#define DEVTEST_NOSOF (1 << 6) /* Do not generate SOF */
#define DEVTEST_TST_MODE (1 << 5) /* Enter Test Mode */
#define DEVTEST_TST_NOTS (1 << 4) /* Do not toggle sequence */
#define DEVTEST_TST_NOCRC (1 << 3) /* Do not append CRC */
#define DEVTEST_TST_CLREA (1 << 2) /* Clear External Side Address */
#define DEVTEST_TST_CXLP (1 << 1) /* EP0 loopback test */
#define DEVTEST_TST_CLRFF (1 << 0) /* Clear FIFO */
/* SOF Frame Number Register */
#define SOFFNR_UFN(x) (((x) >> 11) & 0x7) /* SOF Micro-Frame Number */
#define SOFFNR_FNR(x) ((x) & 0x7ff) /* SOF Frame Number */
/* SOF Mask Timer Register */
#define SOFMTR_TMR(x) ((x) & 0xffff)
/* PHY Test Mode Selector Register */
#define PHYTMSR_TST_PKT (1 << 4) /* Packet send test */
#define PHYTMSR_TST_SE0NAK (1 << 3) /* High-Speed quiescent state */
#define PHYTMSR_TST_KSTA (1 << 2) /* High-Speed K state */
#define PHYTMSR_TST_JSTA (1 << 1) /* High-Speed J state */
#define PHYTMSR_UNPLUG (1 << 0) /* Enable soft-detachment */
/* CX FIFO Register */
#define CXFIFO_BYTES(x) (((x) >> 24) & 0x7f) /* CX/EP0 FIFO byte count */
#define CXFIFO_FIFOE(x) (1 << (((x) & 0x03) + 8)) /* EPx FIFO empty */
#define CXFIFO_FIFOE_FIFO0 (1 << 8)
#define CXFIFO_FIFOE_FIFO1 (1 << 9)
#define CXFIFO_FIFOE_FIFO2 (1 << 10)
#define CXFIFO_FIFOE_FIFO3 (1 << 11)
#define CXFIFO_FIFOE_MASK (0x0f << 8)
#define CXFIFO_CXFIFOE (1 << 5) /* CX FIFO empty */
#define CXFIFO_CXFIFOF (1 << 4) /* CX FIFO full */
#define CXFIFO_CXFIFOCLR (1 << 3) /* CX FIFO clear */
#define CXFIFO_CXSTALL (1 << 2) /* CX Stall */
#define CXFIFO_TSTPKTFIN (1 << 1) /* Test packet data transfer finished */
#define CXFIFO_CXFIN (1 << 0) /* CX data transfer finished */
/* IDLE Counter Register */
#define IDLE_MS(x) ((x) & 0x07) /* PHY suspend delay = x ms */
/* Group Interrupt Mask(Disable) Register */
#define GIMR_GRP2 (1 << 2) /* Disable interrupt group 2 */
#define GIMR_GRP1 (1 << 1) /* Disable interrupt group 1 */
#define GIMR_GRP0 (1 << 0) /* Disable interrupt group 0 */
#define GIMR_MASK 0x07
/* Group Interrupt Mask(Disable) Register 0 (CX) */
#define GIMR0_CXABORT (1 << 5) /* CX command abort interrupt */
#define GIMR0_CXERR (1 << 4) /* CX command error interrupt */
#define GIMR0_CXEND (1 << 3) /* CX command end interrupt */
#define GIMR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */
#define GIMR0_CXIN (1 << 1) /* EP0-IN packet interrupt */
#define GIMR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */
#define GIMR0_MASK 0x3f
/* Group Interrupt Mask(Disable) Register 1 (FIFO) */
#define GIMR1_FIFO_IN(x) (1 << (((x) & 3) + 16)) /* FIFOx IN */
#define GIMR1_FIFO_TX(x) GIMR1_FIFO_IN(x)
#define GIMR1_FIFO_OUT(x) (1 << (((x) & 3) * 2)) /* FIFOx OUT */
#define GIMR1_FIFO_SPK(x) (1 << (((x) & 3) * 2 + 1)) /* FIFOx SHORT PACKET */
#define GIMR1_FIFO_RX(x) (GIMR1_FIFO_OUT(x) | GIMR1_FIFO_SPK(x))
#define GIMR1_MASK 0xf00ff
/* Group Interrupt Mask(Disable) Register 2 (Device) */
#define GIMR2_WAKEUP (1 << 10) /* Device waked up */
#define GIMR2_IDLE (1 << 9) /* Device idle */
#define GIMR2_DMAERR (1 << 8) /* DMA error */
#define GIMR2_DMAFIN (1 << 7) /* DMA finished */
#define GIMR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */
#define GIMR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */
#define GIMR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */
#define GIMR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */
#define GIMR2_RESUME (1 << 2) /* Resume state change Interrupt */
#define GIMR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */
#define GIMR2_RESET (1 << 0) /* Reset Interrupt */
#define GIMR2_MASK 0x7ff
/* Group Interrupt Status Register */
#define GISR_GRP2 (1 << 2) /* Interrupt group 2 */
#define GISR_GRP1 (1 << 1) /* Interrupt group 1 */
#define GISR_GRP0 (1 << 0) /* Interrupt group 0 */
/* Group Interrupt Status Register 0 (CX) */
#define GISR0_CXABORT (1 << 5) /* CX command abort interrupt */
#define GISR0_CXERR (1 << 4) /* CX command error interrupt */
#define GISR0_CXEND (1 << 3) /* CX command end interrupt */
#define GISR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */
#define GISR0_CXIN (1 << 1) /* EP0-IN packet interrupt */
#define GISR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */
/* Group Interrupt Status Register 1 (FIFO) */
#define GISR1_IN_FIFO(x) (1 << (((x) & 0x03) + 16)) /* FIFOx IN */
#define GISR1_OUT_FIFO(x) (1 << (((x) & 0x03) * 2)) /* FIFOx OUT */
#define GISR1_SPK_FIFO(x) (1 << (((x) & 0x03) * 2 + 1)) /* FIFOx SPK */
#define GISR1_RX_FIFO(x) (3 << (((x) & 0x03) * 2)) /* FIFOx OUT/SPK */
/* Group Interrupt Status Register 2 (Device) */
#define GISR2_WAKEUP (1 << 10) /* Device waked up */
#define GISR2_IDLE (1 << 9) /* Device idle */
#define GISR2_DMAERR (1 << 8) /* DMA error */
#define GISR2_DMAFIN (1 << 7) /* DMA finished */
#define GISR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */
#define GISR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */
#define GISR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */
#define GISR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */
#define GISR2_RESUME (1 << 2) /* Resume state change Interrupt */
#define GISR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */
#define GISR2_RESET (1 << 0) /* Reset Interrupt */
/* Receive Zero-Length-Packet Register */
#define RXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP rx interrupt */
/* Transfer Zero-Length-Packet Register */
#define TXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP tx interrupt */
/* ISOC Error/Abort Status Register */
#define ISOEASR_EP(x) (0x10001 << ((x) - 1)) /* EPx ISOC Error/Abort */
/* IN Endpoint Register */
#define IEP_SENDZLP (1 << 15) /* Send Zero-Length-Packet */
#define IEP_TNRHB(x) (((x) & 0x03) << 13) \
/* Transaction Number for High-Bandwidth EP(ISOC) */
#define IEP_RESET (1 << 12) /* Reset Toggle Sequence */
#define IEP_STALL (1 << 11) /* Stall */
#define IEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */
/* OUT Endpoint Register */
#define OEP_RESET (1 << 12) /* Reset Toggle Sequence */
#define OEP_STALL (1 << 11) /* Stall */
#define OEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */
/* Endpoint Map Register (EP1 ~ EP4) */
#define EPMAP14_SET_IN(ep, fifo) \
((fifo) & 3) << (((ep) - 1) << 3 + 0)
#define EPMAP14_SET_OUT(ep, fifo) \
((fifo) & 3) << (((ep) - 1) << 3 + 4)
#define EPMAP14_SET(ep, in, out) \
do { \
EPMAP14_SET_IN(ep, in); \
EPMAP14_SET_OUT(ep, out); \
} while (0)
#define EPMAP14_DEFAULT 0x33221100 /* EP1->FIFO0, EP2->FIFO1... */
/* Endpoint Map Register (EP5 ~ EP8) */
#define EPMAP58_SET_IN(ep, fifo) \
((fifo) & 3) << (((ep) - 5) << 3 + 0)
#define EPMAP58_SET_OUT(ep, fifo) \
((fifo) & 3) << (((ep) - 5) << 3 + 4)
#define EPMAP58_SET(ep, in, out) \
do { \
EPMAP58_SET_IN(ep, in); \
EPMAP58_SET_OUT(ep, out); \
} while (0)
#define EPMAP58_DEFAULT 0x00000000 /* All EPx->FIFO0 */
/* FIFO Map Register */
#define FIFOMAP_BIDIR (2 << 4)
#define FIFOMAP_IN (1 << 4)
#define FIFOMAP_OUT (0 << 4)
#define FIFOMAP_DIR_MASK 0x30
#define FIFOMAP_EP(x) ((x) & 0x0f)
#define FIFOMAP_EP_MASK 0x0f
#define FIFOMAP_CFG_MASK 0x3f
#define FIFOMAP_DEFAULT 0x04030201 /* FIFO0->EP1, FIFO1->EP2... */
#define FIFOMAP(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3))
/* FIFO Configuration Register */
#define FIFOCFG_EN (1 << 5)
#define FIFOCFG_BLKSZ_1024 (1 << 4)
#define FIFOCFG_BLKSZ_512 (0 << 4)
#define FIFOCFG_3BLK (2 << 2)
#define FIFOCFG_2BLK (1 << 2)
#define FIFOCFG_1BLK (0 << 2)
#define FIFOCFG_NBLK_MASK 3
#define FIFOCFG_NBLK_SHIFT 2
#define FIFOCFG_INTR (3 << 0)
#define FIFOCFG_BULK (2 << 0)
#define FIFOCFG_ISOC (1 << 0)
#define FIFOCFG_RSVD (0 << 0) /* Reserved */
#define FIFOCFG_TYPE_MASK 3
#define FIFOCFG_TYPE_SHIFT 0
#define FIFOCFG_CFG_MASK 0x3f
#define FIFOCFG(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3))
/* FIFO Control Status Register */
#define FIFOCSR_RESET (1 << 12) /* FIFO Reset */
#define FIFOCSR_BYTES(x) ((x) & 0x7ff) /* Length(bytes) for OUT-EP/FIFO */
/* DMA Target FIFO Register */
#define DMAFIFO_CX (1 << 4) /* DMA FIFO = CX FIFO */
#define DMAFIFO_FIFO(x) (1 << ((x) & 0x3)) /* DMA FIFO = FIFOx */
/* DMA Control Register */
#define DMACTRL_LEN(x) (((x) & 0x1ffff) << 8) /* DMA length (Bytes) */
#define DMACTRL_LEN_SHIFT 8
#define DMACTRL_CLRFF (1 << 4) /* Clear FIFO upon DMA abort */
#define DMACTRL_ABORT (1 << 3) /* DMA abort */
#define DMACTRL_IO2IO (1 << 2) /* IO to IO */
#define DMACTRL_FIFO2MEM (0 << 1) /* FIFO to Memory */
#define DMACTRL_MEM2FIFO (1 << 1) /* Memory to FIFO */
#define DMACTRL_START (1 << 0) /* DMA start */
#endif

61
include/usb/fusbh200.h Normal file
View File

@ -0,0 +1,61 @@
/*
* Faraday USB 2.0 EHCI Controller
*
* (C) Copyright 2010 Faraday Technology
* Dante Su <dantesu@faraday-tech.com>
*
* This file is released under the terms of GPL v2 and any later version.
* See the file COPYING in the root directory of the source tree for details.
*/
#ifndef _FUSBH200_H
#define _FUSBH200_H
struct fusbh200_regs {
struct {
uint32_t data[4];
} hccr; /* 0x00 - 0x0f: hccr */
struct {
uint32_t data[9];
} hcor; /* 0x10 - 0x33: hcor */
uint32_t easstr;/* 0x34: EOF&Async. Sched. Sleep Timer Register */
uint32_t rsvd[2];
uint32_t bmcsr; /* 0x40: Bus Monitor Control Status Register */
uint32_t bmisr; /* 0x44: Bus Monitor Interrupt Status Register */
uint32_t bmier; /* 0x48: Bus Monitor Interrupt Enable Register */
};
/* EOF & Async. Schedule Sleep Timer Register */
#define EASSTR_RUNNING (1 << 6) /* Put transceiver in running/resume mode */
#define EASSTR_SUSPEND (0 << 6) /* Put transceiver in suspend mode */
#define EASSTR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */
#define EASSTR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */
#define EASSTR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
/* Bus Monitor Control Status Register */
#define BMCSR_SPD_HIGH (2 << 9) /* Speed of the attached device */
#define BMCSR_SPD_LOW (1 << 9)
#define BMCSR_SPD_FULL (0 << 9)
#define BMCSR_SPD_MASK (3 << 9)
#define BMCSR_SPD_SHIFT 9
#define BMCSR_SPD(x) ((x >> 9) & 0x03)
#define BMCSR_VBUS (1 << 8) /* VBUS Valid */
#define BMCSR_VBUS_OFF (1 << 4) /* VBUS Off */
#define BMCSR_VBUS_ON (0 << 4) /* VBUS On */
#define BMCSR_IRQLH (1 << 3) /* IRQ triggered at level-high */
#define BMCSR_IRQLL (0 << 3) /* IRQ triggered at level-low */
#define BMCSR_HALFSPD (1 << 2) /* Half speed mode for FPGA test */
#define BMCSR_HFT_LONG (1 << 1) /* HDISCON noise filter = 270 us*/
#define BMCSR_HFT (0 << 1) /* HDISCON noise filter = 135 us*/
#define BMCSR_VFT_LONG (1 << 1) /* VBUS noise filter = 472 us*/
#define BMCSR_VFT (0 << 1) /* VBUS noise filter = 135 us*/
/* Bus Monitor Interrupt Status Register */
/* Bus Monitor Interrupt Enable Register */
#define BMISR_DMAERR (1 << 4) /* DMA error */
#define BMISR_DMA (1 << 3) /* DMA complete */
#define BMISR_DEVRM (1 << 2) /* device removed */
#define BMISR_OVD (1 << 1) /* over-current detected */
#define BMISR_VBUSERR (1 << 0) /* VBUS error */
#endif