sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

arm:at91-boards: remove console_init_f where unnecessary 

A lot of at91 boards have the console_init_f in board_init. This is useless
cause it was called before by generic code in lib/board.c.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
cc: Jens Scharsig <esw@bus-elektronik.de>
cc: Stelian Pop <stelian@popies.net>
cc: Sedji Gaouaou<sedji.gaouaou@atmel.com>
cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
cc: Eric Benard <eric@eukrea.com>
Tested-by: voice.shen@atmel.com
Tested-by: voice.shen@atmel.com
Acked-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
Tested-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
This commit is contained in:
Andreas Bießmann 2012-08-16 06:01:51 +00:00 committed by Albert ARIBAUD
parent 82c4c64526
commit bfc325ed38
8 changed files with 0 additions and 22 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
board/BuS/eb_cpux9k2/cpux9k2.c
View File

@ -59,8 +59,6 @@ DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
/* Enable Ctrlc */
console_init_f();
/* Correct IRDA resistor problem / Set PA23_TXD in Output */
writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);

3
board/BuS/vl_ma2sc/vl_ma2sc.c
View File

@ -244,9 +244,6 @@ int board_init(void)
writel(pin, &pio->piod.odr);
writel(pin, &pio->piod.owdr);
/* Enable Ctrlc */
console_init_f();
gd->bd->bi_arch_number = MACH_TYPE_VL_MA2SC;
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;

3
board/atmel/at91sam9261ek/at91sam9261ek.c
View File

@ -242,9 +242,6 @@ void lcd_show_board_info(void)
int board_init(void)
{
/* Enable Ctrlc */
console_init_f();
#ifdef CONFIG_AT91SAM9G10EK
/* arch number of AT91SAM9G10EK-Board */
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK;

3
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
View File

@ -258,9 +258,6 @@ int board_early_init_f(void)
int board_init(void)
{
/* Enable Ctrlc */
console_init_f();
/* arch number of AT91SAM9M10G45EK-Board */
#ifdef CONFIG_AT91SAM9M10G45EK
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10G45EK;

3
board/atmel/at91sam9rlek/at91sam9rlek.c
View File

@ -192,9 +192,6 @@ int board_early_init_f(void)
int board_init(void)
{
/* Enable Ctrlc */
console_init_f();
/* arch number of AT91SAM9RLEK-Board */
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK;
/* adress of boot parameters */

3
board/calao/sbc35_a9g20/sbc35_a9g20.c
View File

@ -149,9 +149,6 @@ static void sbc35_a9g20_macb_hw_init(void)
int board_init(void)
{
/* Enable Ctrlc */
console_init_f();
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;

3
board/calao/tny_a9260/tny_a9260.c
View File

@ -83,9 +83,6 @@ static void tny_a9260_nand_hw_init(void)
int board_init(void)
{
/* Enable Ctrlc */
console_init_f();
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;

2
board/eukrea/cpuat91/cpuat91.c
View File

@ -43,8 +43,6 @@ DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
/* Enable Ctrlc */
console_init_f();
/* arch number of CPUAT91-Board */
gd->bd->bi_arch_number = MACH_TYPE_CPUAT91;
/* adress of boot parameters */