sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

This commit is contained in:
Albert ARIBAUD 2013-06-19 23:58:01 +02:00
parent 69f14dc2fd bf3b98a188
commit c2543a21df
13 changed files with 164 additions and 176 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

40
arch/arm/cpu/armv7/am33xx/board.c
View File

@ -149,3 +149,43 @@ int arch_misc_init(void)
#endif
return 0;
}
#ifdef CONFIG_SPL_BUILD
void rtc32k_enable(void)
{
struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
/*
* Unlock the RTC's registers. For more details please see the
* RTC_SS section of the TRM. In order to unlock we need to
* write these specific values (keys) in this order.
*/
writel(0x83e70b13, &rtc->kick0r);
writel(0x95a4f1e0, &rtc->kick1r);
/* Enable the RTC 32K OSC by setting bits 3 and 6. */
writel((1 << 3) | (1 << 6), &rtc->osc);
}
#define UART_RESET (0x1 << 1)
#define UART_CLK_RUNNING_MASK 0x1
#define UART_SMART_IDLE_EN (0x1 << 0x3)
void uart_soft_reset(void)
{
struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
u32 regval;
regval = readl(&uart_base->uartsyscfg);
regval |= UART_RESET;
writel(regval, &uart_base->uartsyscfg);
while ((readl(&uart_base->uartsyssts) &
UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
;
/* Disable smart idle */
regval = readl(&uart_base->uartsyscfg);
regval |= UART_SMART_IDLE_EN;
writel(regval, &uart_base->uartsyscfg);
}
#endif

9
arch/arm/cpu/armv7/am33xx/clock_am33xx.c
View File

@ -246,7 +246,7 @@ static void enable_per_clocks(void)
;
}
static void mpu_pll_config(void)
void mpu_pll_config_val(int mpull_m)
{
u32 clkmode, clksel, div_m2;
@ -260,7 +260,7 @@ static void mpu_pll_config(void)
;
clksel = clksel & (~CLK_SEL_MASK);
clksel = clksel | ((MPUPLL_M << CLK_SEL_SHIFT) | MPUPLL_N);
clksel = clksel | ((mpull_m << CLK_SEL_SHIFT) | MPUPLL_N);
writel(clksel, &cmwkup->clkseldpllmpu);
div_m2 = div_m2 & ~CLK_DIV_MASK;
@ -274,6 +274,11 @@ static void mpu_pll_config(void)
;
}
static void mpu_pll_config(void)
{
mpu_pll_config_val(CONFIG_SYS_MPUCLK);
}
static void core_pll_config(void)
{
u32 clkmode, clksel, div_m4, div_m5, div_m6;

4
arch/arm/include/asm/arch-am33xx/sys_proto.h
View File

@ -32,6 +32,7 @@ extern struct ctrl_stat *cstat;
u32 get_device_type(void);
void save_omap_boot_params(void);
void setup_clocks_for_console(void);
void mpu_pll_config_val(int mpull_m);
void ddr_pll_config(unsigned int ddrpll_M);
void sdelay(unsigned long);
@ -41,4 +42,7 @@ void gpmc_init(void);
void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
u32 size);
void omap_nand_switch_ecc(uint32_t, uint32_t);
void rtc32k_enable(void);
void uart_soft_reset(void);
#endif

40
board/isee/igep0033/board.c
View File

@ -36,37 +36,13 @@
DECLARE_GLOBAL_DATA_PTR;
static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
#ifdef CONFIG_SPL_BUILD
static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
#endif
/* MII mode defines */
#define RMII_MODE_ENABLE 0x4D
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
/* UART Defines */
#ifdef CONFIG_SPL_BUILD
#define UART_RESET (0x1 << 1)
#define UART_CLK_RUNNING_MASK 0x1
#define UART_SMART_IDLE_EN (0x1 << 0x3)
static void rtc32k_enable(void)
{
struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
/*
* Unlock the RTC's registers. For more details please see the
* RTC_SS section of the TRM. In order to unlock we need to
* write these specific values (keys) in this order.
*/
writel(0x83e70b13, &rtc->kick0r);
writel(0x95a4f1e0, &rtc->kick1r);
/* Enable the RTC 32K OSC by setting bits 3 and 6. */
writel((1 << 3) | (1 << 6), &rtc->osc);
}
static const struct ddr_data ddr3_data = {
.datardsratio0 = K4B2G1646EBIH9_RD_DQS,
.datawdsratio0 = K4B2G1646EBIH9_WR_DQS,
@ -131,23 +107,9 @@ void s_init(void)
/* Enable RTC32K clock */
rtc32k_enable();
/* UART softreset */
u32 regval;
enable_uart0_pin_mux();
regval = readl(&uart_base->uartsyscfg);
regval |= UART_RESET;
writel(regval, &uart_base->uartsyscfg);
while ((readl(&uart_base->uartsyssts) &
UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
;
/* Disable smart idle */
regval = readl(&uart_base->uartsyscfg);
regval |= UART_SMART_IDLE_EN;
writel(regval, &uart_base->uartsyscfg);
uart_soft_reset();
gd = &gdata;
preloader_console_init();

39
board/phytec/pcm051/board.c
View File

@ -39,9 +39,6 @@
DECLARE_GLOBAL_DATA_PTR;
static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
#ifdef CONFIG_SPL_BUILD
static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
#endif
/* MII mode defines */
#define MII_MODE_ENABLE 0x0
@ -50,31 +47,11 @@ static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
/* UART defines */
#ifdef CONFIG_SPL_BUILD
#define UART_RESET (0x1 << 1)
#define UART_CLK_RUNNING_MASK 0x1
#define UART_SMART_IDLE_EN (0x1 << 0x3)
/* DDR RAM defines */
#define DDR_CLK_MHZ 303 /* DDR_DPLL_MULT value */
static void rtc32k_enable(void)
{
struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
/*
* Unlock the RTC's registers. For more details please see the
* RTC_SS section of the TRM. In order to unlock we need to
* write these specific values (keys) in this order.
*/
writel(0x83e70b13, &rtc->kick0r);
writel(0x95a4f1e0, &rtc->kick1r);
/* Enable the RTC 32K OSC by setting bits 3 and 6. */
writel((1 << 3) | (1 << 6), &rtc->osc);
}
static const struct ddr_data ddr3_data = {
.datardsratio0 = MT41J256M8HX15E_RD_DQS,
.datawdsratio0 = MT41J256M8HX15E_WR_DQS,
@ -141,22 +118,8 @@ void s_init(void)
/* Enable RTC32K clock */
rtc32k_enable();
/* UART softreset */
u32 regval;
enable_uart0_pin_mux();
regval = readl(&uart_base->uartsyscfg);
regval |= UART_RESET;
writel(regval, &uart_base->uartsyscfg);
while ((readl(&uart_base->uartsyssts) & UART_CLK_RUNNING_MASK)
!= UART_CLK_RUNNING_MASK)
;
/* Disable smart idle */
regval = readl(&uart_base->uartsyscfg);
regval |= UART_SMART_IDLE_EN;
writel(regval, &uart_base->uartsyscfg);
uart_soft_reset();
gd = &gdata;

39
board/ti/am335x/board.c
View File

@ -38,9 +38,6 @@
DECLARE_GLOBAL_DATA_PTR;
static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
#ifdef CONFIG_SPL_BUILD
static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
#endif
/* MII mode defines */
#define MII_MODE_ENABLE 0x0
@ -126,28 +123,7 @@ static int read_eeprom(void)
return 0;
}
/* UART Defines */
#ifdef CONFIG_SPL_BUILD
#define UART_RESET (0x1 << 1)
#define UART_CLK_RUNNING_MASK 0x1
#define UART_SMART_IDLE_EN (0x1 << 0x3)
static void rtc32k_enable(void)
{
struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
/*
* Unlock the RTC's registers. For more details please see the
* RTC_SS section of the TRM. In order to unlock we need to
* write these specific values (keys) in this order.
*/
writel(0x83e70b13, &rtc->kick0r);
writel(0x95a4f1e0, &rtc->kick1r);
/* Enable the RTC 32K OSC by setting bits 3 and 6. */
writel((1 << 3) | (1 << 6), &rtc->osc);
}
static const struct ddr_data ddr2_data = {
.datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
(MT47H128M16RT25E_RD_DQS<<20) |
@ -330,9 +306,6 @@ void s_init(void)
/* Enable RTC32K clock */
rtc32k_enable();
/* UART softreset */
u32 regVal;
#ifdef CONFIG_SERIAL1
enable_uart0_pin_mux();
#endif /* CONFIG_SERIAL1 */
@ -352,17 +325,7 @@ void s_init(void)
enable_uart5_pin_mux();
#endif /* CONFIG_SERIAL6 */
regVal = readl(&uart_base->uartsyscfg);
regVal |= UART_RESET;
writel(regVal, &uart_base->uartsyscfg);
while ((readl(&uart_base->uartsyssts) &
UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
;
/* Disable smart idle */
regVal = readl(&uart_base->uartsyscfg);
regVal |= UART_SMART_IDLE_EN;
writel(regVal, &uart_base->uartsyscfg);
uart_soft_reset();
gd = &gdata;

104
board/ti/panda/panda.c
View File

@ -37,6 +37,11 @@
#endif
#define PANDA_ULPI_PHY_TYPE_GPIO 182
#define PANDA_BOARD_ID_1_GPIO 101
#define PANDA_ES_BOARD_ID_1_GPIO 48
#define PANDA_BOARD_ID_2_GPIO 171
#define PANDA_ES_BOARD_ID_3_GPIO 3
#define PANDA_ES_BOARD_ID_4_GPIO 2
DECLARE_GLOBAL_DATA_PTR;
@ -66,6 +71,73 @@ int board_eth_init(bd_t *bis)
return 0;
}
/*
* Routine: get_board_revision
* Description: Detect if we are running on a panda revision A1-A6,
* or an ES panda board. This can be done by reading
* the level of GPIOs and checking the processor revisions.
* This should result in:
* Panda 4430:
* GPIO171, GPIO101, GPIO182: 0 1 1 => A1-A5
* GPIO171, GPIO101, GPIO182: 1 0 1 => A6
* Panda ES:
* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 0 1 1 => B1/B2
* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 1 1 1 => B3
*/
int get_board_revision(void)
{
int board_id0, board_id1, board_id2;
int board_id3, board_id4;
int board_id;
int processor_rev = omap_revision();
/* Setup the mux for the common board ID pins (gpio 171 and 182) */
writew((IEN | M3), (*ctrl)->control_padconf_core_base + UNIPRO_TX0);
writew((IEN | M3), (*ctrl)->control_padconf_core_base + FREF_CLK2_OUT);
board_id0 = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
board_id2 = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
if ((processor_rev >= OMAP4460_ES1_0 &&
processor_rev <= OMAP4460_ES1_1)) {
/*
* Setup the mux for the ES specific board ID pins (gpio 101,
* 2 and 3.
*/
writew((IEN | M3), (*ctrl)->control_padconf_core_base +
GPMC_A24);
writew((IEN | M3), (*ctrl)->control_padconf_core_base +
UNIPRO_RY0);
writew((IEN | M3), (*ctrl)->control_padconf_core_base +
UNIPRO_RX1);
board_id1 = gpio_get_value(PANDA_ES_BOARD_ID_1_GPIO);
board_id3 = gpio_get_value(PANDA_ES_BOARD_ID_3_GPIO);
board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO);
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
setenv("board_name", strcat(CONFIG_SYS_BOARD, "-es"));
#endif
board_id = ((board_id4 << 4) | (board_id3 << 3) |
(board_id2 << 2) | (board_id1 << 1) | (board_id0));
} else {
/* Setup the mux for the Ax specific board ID pins (gpio 101) */
writew((IEN | M3), (*ctrl)->control_padconf_core_base +
FREF_CLK2_OUT);
board_id1 = gpio_get_value(PANDA_BOARD_ID_1_GPIO);
board_id = ((board_id2 << 2) | (board_id1 << 1) | (board_id0));
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3))
setenv("board_name", strcat(CONFIG_SYS_BOARD, "-a4"));
#endif
}
return board_id;
}
/**
* @brief misc_init_r - Configure Panda board specific configurations
* such as power configurations, ethernet initialization as phase2 of
@ -82,11 +154,7 @@ int misc_init_r(void)
if (omap_revision() == OMAP4430_ES1_0)
return 0;
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
if (omap_revision() >= OMAP4460_ES1_0 ||
omap_revision() <= OMAP4460_ES1_1)
setenv("board_name", strcat(CONFIG_SYS_BOARD, "-es"));
#endif
get_board_revision();
gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO);
phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
@ -106,7 +174,7 @@ int misc_init_r(void)
auxclk |= AUXCLK_ENABLE_MASK;
writel(auxclk, &scrm->auxclk3);
} else {
} else {
/* ULPI PHY supplied by auxclk1 derived from PER dpll */
debug("ULPI PHY supplied by auxclk1\n");
@ -151,9 +219,9 @@ void set_muxconf_regs_essential(void)
if (omap_revision() >= OMAP4460_ES1_0)
do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_essential_4460,
sizeof(wkup_padconf_array_essential_4460) /
sizeof(struct pad_conf_entry));
wkup_padconf_array_essential_4460,
sizeof(wkup_padconf_array_essential_4460) /
sizeof(struct pad_conf_entry));
}
void set_muxconf_regs_non_essential(void)
@ -165,14 +233,14 @@ void set_muxconf_regs_non_essential(void)
if (omap_revision() < OMAP4460_ES1_0)
do_set_mux((*ctrl)->control_padconf_core_base,
core_padconf_array_non_essential_4430,
sizeof(core_padconf_array_non_essential_4430) /
sizeof(struct pad_conf_entry));
core_padconf_array_non_essential_4430,
sizeof(core_padconf_array_non_essential_4430) /
sizeof(struct pad_conf_entry));
else
do_set_mux((*ctrl)->control_padconf_core_base,
core_padconf_array_non_essential_4460,
sizeof(core_padconf_array_non_essential_4460) /
sizeof(struct pad_conf_entry));
core_padconf_array_non_essential_4460,
sizeof(core_padconf_array_non_essential_4460) /
sizeof(struct pad_conf_entry));
do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_non_essential,
@ -181,9 +249,9 @@ void set_muxconf_regs_non_essential(void)
if (omap_revision() < OMAP4460_ES1_0)
do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_non_essential_4430,
sizeof(wkup_padconf_array_non_essential_4430) /
sizeof(struct pad_conf_entry));
wkup_padconf_array_non_essential_4430,
sizeof(wkup_padconf_array_non_essential_4430) /
sizeof(struct pad_conf_entry));
}
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)

35
board/ti/ti814x/evm.c
View File

@ -37,49 +37,16 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPL_BUILD
static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
#endif
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
/* UART Defines */
#ifdef CONFIG_SPL_BUILD
#define UART_RESET (0x1 << 1)
#define UART_CLK_RUNNING_MASK 0x1
#define UART_SMART_IDLE_EN (0x1 << 0x3)
static void rtc32k_enable(void)
{
struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
/*
* Unlock the RTC's registers. For more details please see the
* RTC_SS section of the TRM. In order to unlock we need to
* write these specific values (keys) in this order.
*/
writel(0x83e70b13, &rtc->kick0r);
writel(0x95a4f1e0, &rtc->kick1r);
/* Enable the RTC 32K OSC by setting bits 3 and 6. */
writel((1 << 3) | (1 << 6), &rtc->osc);
}
static void uart_enable(void)
{
u32 regVal;
/* UART softreset */
regVal = readl(&uart_base->uartsyscfg);
regVal |= UART_RESET;
writel(regVal, &uart_base->uartsyscfg);
while ((readl(&uart_base->uartsyssts) &
UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
;
/* Disable smart idle */
regVal = readl(&uart_base->uartsyscfg);
regVal |= UART_SMART_IDLE_EN;
writel(regVal, &uart_base->uartsyscfg);
uart_soft_reset();
}
static void wdt_disable(void)

7
include/configs/am335x_evm.h
View File

@ -60,7 +60,7 @@
"rdaddr=0x81000000\0" \
"bootdir=/boot\0" \
"bootfile=uImage\0" \
"fdtfile=\0" \
"fdtfile=undefined\0" \
"console=ttyO0,115200n8\0" \
"optargs=\0" \
"mtdids=" MTDIDS_DEFAULT "\0" \
@ -145,8 +145,9 @@
"if test $board_name = A33515BB; then " \
"setenv fdtfile am335x-evm.dtb; fi; " \
"if test $board_name = A335X_SK; then " \
"setenv fdtfile am335x-evmsk.dtb; fi\0" \
"setenv fdtfile am335x-evmsk.dtb; fi " \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0"
#endif
#define CONFIG_BOOTCOMMAND \

3
include/configs/dra7xx_evm.h
View File

@ -41,4 +41,7 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_OMAP_ABE_SYSCK
#define CONSOLEDEV "ttyO0"
#endif /* __CONFIG_DRA7XX_EVM_H */

7
include/configs/omap4_common.h
View File

@ -150,6 +150,7 @@
"console=ttyO2,115200n8\0" \
"fdt_high=0xffffffff\0" \
"fdtaddr=0x80f80000\0" \
"fdtfile=undefined\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
@ -177,8 +178,12 @@
"setenv fdtfile omap4-sdp.dtb; fi; " \
"if test $board_name = panda; then " \
"setenv fdtfile omap4-panda.dtb; fi;" \
"if test $board_name = panda-a4; then " \
"setenv fdtfile omap4-panda-a4.dtb; fi;" \
"if test $board_name = panda-es; then " \
"setenv fdtfile omap4-panda-es.dtb; fi; \0" \
"setenv fdtfile omap4-panda-es.dtb; fi;" \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
#define CONFIG_BOOTCOMMAND \

9
include/configs/omap5_common.h
View File

@ -136,9 +136,10 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"console=ttyO2,115200n8\0" \
"console=" CONSOLEDEV ",115200n8\0" \
"fdt_high=0xffffffff\0" \
"fdtaddr=0x80f80000\0" \
"fdtfile=undefined\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
@ -166,7 +167,11 @@
"bootz ${loadaddr} - ${fdtaddr}\0" \
"findfdt="\
"if test $board_name = omap5_uevm; then " \
"setenv fdtfile omap5-uevm.dtb; fi;\0 " \
"setenv fdtfile omap5-uevm.dtb; fi; " \
"if test $board_name = dra7xx; then " \
"setenv fdtfile dra7-evm.dtb; fi;" \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
#define CONFIG_BOOTCOMMAND \

4
include/configs/omap5_uevm.h
View File

@ -53,7 +53,9 @@
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
#define CONFIG_SYS_PROMPT "OMAP5430 EVM # "
#define CONFIG_SYS_PROMPT "OMAP5432 uEVM # "
#define CONSOLEDEV "ttyO2"
#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296
#endif /* __CONFIG_OMAP5_EVM_H */