sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

nand: Move the sub-page read support enable to a flag 

Use a flag instead of a hard-coded macro so that sub-page reads can be
enabled in other cases (such as on-die ecc).

This is the same as a5ff4f102937a3492bca4a9ff0c341d78813414c in Linux

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
This commit is contained in:
Joe Hershberger 2012-11-05 06:46:31 +00:00 committed by Scott Wood
parent 79da5e3d5d
commit c788ecfdc3
2 changed files with 11 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
drivers/mtd/nand/nand_base.c
View File

@ -1245,7 +1245,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
if (unlikely(ops->mode == MTD_OOB_RAW))
ret = chip->ecc.read_page_raw(mtd, chip,
bufpoi, page);
else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) &&
!oob)
ret = chip->ecc.read_subpage(mtd, chip,
col, bytes, bufpoi);
else
@ -1256,7 +1257,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
/* Transfer not aligned data */
if (!aligned) {
if (!NAND_SUBPAGE_READ(chip) && !oob &&
if (!NAND_HAS_SUBPAGE_READ(chip) && !oob &&
!(mtd->ecc_stats.failed - stats.failed))
chip->pagebuf = realpage;
memcpy(buf, chip->buffers->databuf + col, bytes);
@ -3150,6 +3151,10 @@ int nand_scan_tail(struct mtd_info *mtd)
/* Invalidate the pagebuffer reference */
chip->pagebuf = -1;
/* Large page NAND with SOFT_ECC should support subpage reads */
if ((chip->ecc.mode == NAND_ECC_SOFT) && (chip->page_shift > 9))
chip->options |= NAND_SUBPAGE_READ;
/* Fill in remaining MTD driver data */
mtd->type = MTD_NANDFLASH;
mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :

7
include/linux/mtd/nand.h
View File

@ -194,6 +194,9 @@ typedef enum {
/* Device behaves just like nand, but is readonly */
#define NAND_ROM 0x00000800
/* Device supports subpage reads */
#define NAND_SUBPAGE_READ 0x00001000
/* Options valid for Samsung large page devices */
#define NAND_SAMSUNG_LP_OPTIONS \
(NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK)
@ -203,9 +206,7 @@ typedef enum {
#define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
#define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
/* Large page NAND with SOFT_ECC should support subpage reads */
#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \
&& (chip->page_shift > 9))
#define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ))
/* Non chip related options */
/*