Merge branch 'master' of git://git.denx.de/u-boot-atmel

This commit is contained in:
Tom Rini 2015-02-10 10:42:22 -05:00
commit c956662cc3
42 changed files with 518 additions and 431 deletions

3
README
View File

@ -1257,6 +1257,9 @@ The following options need to be configured:
SoC, then define this variable and provide board
specific code for the "hw_watchdog_reset" function.
CONFIG_AT91_HW_WDT_TIMEOUT
specify the timeout in seconds. default 2 seconds.
- U-Boot Version:
CONFIG_VERSION_VARIABLE
If this variable is defined, an environment variable

View File

@ -527,10 +527,12 @@ config TARGET_SAMA5D3XEK
config TARGET_SAMA5D4_XPLAINED
bool "Support sama5d4_xplained"
select CPU_V7
select SUPPORT_SPL
config TARGET_SAMA5D4EK
bool "Support sama5d4ek"
select CPU_V7
select SUPPORT_SPL
config TARGET_BCM28155_AP
bool "Support bcm28155_ap"

View File

@ -5,7 +5,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
obj-$(CONFIG_AT91CAP9) += at91cap9_devices.o
obj-$(CONFIG_AT91SAM9260) += at91sam9260_devices.o
obj-$(CONFIG_AT91SAM9G20) += at91sam9260_devices.o
obj-$(CONFIG_AT91SAM9XE) += at91sam9260_devices.o

View File

@ -1,189 +0,0 @@
/*
* (C) Copyright 2007-2008
* Stelian Pop <stelian@popies.net>
* Lead Tech Design <www.leadtechdesign.com>
*
* (C) Copyright 2009
* Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
* esd electronic system design gmbh <www.esd.eu>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
void at91_serial0_hw_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
at91_set_a_periph(AT91_PIO_PORTA, 22, 1); /* TXD0 */
at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* RXD0 */
writel(1 << AT91CAP9_ID_US0, &pmc->pcer);
}
void at91_serial1_hw_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */
at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* RXD1 */
writel(1 << AT91CAP9_ID_US1, &pmc->pcer);
}
void at91_serial2_hw_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */
at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* RXD2 */
writel(1 << AT91CAP9_ID_US2, &pmc->pcer);
}
void at91_serial3_hw_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* DRXD */
at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */
writel(1 << AT91_ID_SYS, &pmc->pcer);
}
void at91_serial_hw_init(void)
{
#ifdef CONFIG_USART0
at91_serial0_hw_init();
#endif
#ifdef CONFIG_USART1
at91_serial1_hw_init();
#endif
#ifdef CONFIG_USART2
at91_serial2_hw_init();
#endif
#ifdef CONFIG_USART3 /* DBGU */
at91_serial3_hw_init();
#endif
}
#ifdef CONFIG_HAS_DATAFLASH
void at91_spi0_hw_init(unsigned long cs_mask)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
at91_set_b_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */
at91_set_b_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */
at91_set_b_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */
/* Enable clock */
writel(1 << AT91CAP9_ID_SPI0, &pmc->pcer);
if (cs_mask & (1 << 0)) {
at91_set_b_periph(AT91_PIO_PORTA, 5, 1);
}
if (cs_mask & (1 << 1)) {
at91_set_b_periph(AT91_PIO_PORTA, 3, 1);
}
if (cs_mask & (1 << 2)) {
at91_set_b_periph(AT91_PIO_PORTD, 0, 1);
}
if (cs_mask & (1 << 3)) {
at91_set_b_periph(AT91_PIO_PORTD, 1, 1);
}
if (cs_mask & (1 << 4)) {
at91_set_pio_output(AT91_PIO_PORTA, 5, 1);
}
if (cs_mask & (1 << 5)) {
at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
}
if (cs_mask & (1 << 6)) {
at91_set_pio_output(AT91_PIO_PORTD, 0, 1);
}
if (cs_mask & (1 << 7)) {
at91_set_pio_output(AT91_PIO_PORTD, 1, 1);
}
}
void at91_spi1_hw_init(unsigned long cs_mask)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* SPI1_MISO */
at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* SPI1_MOSI */
at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* SPI1_SPCK */
/* Enable clock */
writel(1 << AT91CAP9_ID_SPI1, &pmc->pcer);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTB, 15, 1);
}
if (cs_mask & (1 << 1)) {
at91_set_a_periph(AT91_PIO_PORTB, 16, 1);
}
if (cs_mask & (1 << 2)) {
at91_set_a_periph(AT91_PIO_PORTB, 17, 1);
}
if (cs_mask & (1 << 3)) {
at91_set_a_periph(AT91_PIO_PORTB, 18, 1);
}
if (cs_mask & (1 << 4)) {
at91_set_pio_output(AT91_PIO_PORTB, 15, 1);
}
if (cs_mask & (1 << 5)) {
at91_set_pio_output(AT91_PIO_PORTB, 16, 1);
}
if (cs_mask & (1 << 6)) {
at91_set_pio_output(AT91_PIO_PORTB, 17, 1);
}
if (cs_mask & (1 << 7)) {
at91_set_pio_output(AT91_PIO_PORTB, 18, 1);
}
}
#endif
#ifdef CONFIG_MACB
void at91_macb_hw_init(void)
{
at91_set_a_periph(AT91_PIO_PORTB, 21, 0); /* ETXCK_EREFCK */
at91_set_a_periph(AT91_PIO_PORTB, 22, 0); /* ERXDV */
at91_set_a_periph(AT91_PIO_PORTB, 25, 0); /* ERX0 */
at91_set_a_periph(AT91_PIO_PORTB, 26, 0); /* ERX1 */
at91_set_a_periph(AT91_PIO_PORTB, 27, 0); /* ERXER */
at91_set_a_periph(AT91_PIO_PORTB, 28, 0); /* ETXEN */
at91_set_a_periph(AT91_PIO_PORTB, 23, 0); /* ETX0 */
at91_set_a_periph(AT91_PIO_PORTB, 24, 0); /* ETX1 */
at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* EMDIO */
at91_set_a_periph(AT91_PIO_PORTB, 29, 0); /* EMDC */
#ifndef CONFIG_RMII
at91_set_b_periph(AT91_PIO_PORTC, 25, 0); /* ECRS */
at91_set_b_periph(AT91_PIO_PORTC, 26, 0); /* ECOL */
at91_set_b_periph(AT91_PIO_PORTC, 22, 0); /* ERX2 */
at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* ERX3 */
at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ERXCK */
at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ETX2 */
at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ETX3 */
at91_set_b_periph(AT91_PIO_PORTC, 24, 0); /* ETXER */
#endif
}
#endif
#ifdef CONFIG_AT91_CAN
void at91_can_hw_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* CAN_TX */
at91_set_a_periph(AT91_PIO_PORTA, 13, 1); /* CAN_RX */
/* Enable clock */
writel(1 << AT91CAP9_ID_CAN, &pmc->pcer);
}
#endif

View File

@ -130,10 +130,18 @@ void at91_mck_init(u32 mckr)
AT91_PMC_MCKR_PRES_MASK |
AT91_PMC_MCKR_MDIV_MASK |
AT91_PMC_MCKR_PLLADIV_2);
#ifdef CPU_HAS_H32MXDIV
tmp &= ~AT91_PMC_MCKR_H32MXDIV;
#endif
tmp |= mckr & (AT91_PMC_MCKR_CSS_MASK |
AT91_PMC_MCKR_PRES_MASK |
AT91_PMC_MCKR_MDIV_MASK |
AT91_PMC_MCKR_PLLADIV_2);
#ifdef CPU_HAS_H32MXDIV
tmp |= mckr & AT91_PMC_MCKR_H32MXDIV;
#endif
writel(tmp, &pmc->mckr);
while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))

View File

@ -10,6 +10,8 @@
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/clk.h>
#include <asm/arch/sama5_matrix.h>
#include <asm/arch/sama5_sfr.h>
#include <asm/arch/sama5d4.h>
char *get_cpu_name()
@ -44,3 +46,48 @@ void at91_udp_hw_init(void)
at91_periph_clk_enable(ATMEL_ID_UDPHS);
}
#endif
#ifdef CONFIG_SPL_BUILD
void matrix_init(void)
{
struct atmel_matrix *h64mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX0;
struct atmel_matrix *h32mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX1;
int i;
/* Disable the write protect */
writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr);
writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr);
/* DDR port 1 ~ poart 7, slave number is: 4 ~ 10 */
for (i = 4; i <= 10; i++) {
writel(0x000f0f0f, &h64mx->ssr[i]);
writel(0x0000ffff, &h64mx->sassr[i]);
writel(0x0000000f, &h64mx->srtsr[i]);
}
/* CS3 */
writel(0x00c0c0c0, &h32mx->ssr[3]);
writel(0xff000000, &h32mx->sassr[3]);
writel(0xff000000, &h32mx->srtsr[3]);
/* NFC SRAM */
writel(0x00010101, &h32mx->ssr[4]);
writel(0x00000001, &h32mx->sassr[4]);
writel(0x00000001, &h32mx->srtsr[4]);
/* Enable the write protect */
writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr);
writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr);
}
void redirect_int_from_saic_to_aic(void)
{
struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR;
u32 key32;
if (!(readl(&sfr->aicredir) & ATMEL_SFR_AICREDIR_NSAIC)) {
key32 = readl(&sfr->sn1) ^ ATMEL_SFR_AICREDIR_KEY;
writel((key32 | ATMEL_SFR_AICREDIR_NSAIC), &sfr->aicredir);
}
}
#endif

View File

@ -13,5 +13,6 @@ ifneq ($(CONFIG_SPL_BUILD),)
obj-$(CONFIG_AT91SAM9G20) += sdram.o spl_at91.o
obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o spl_at91.o
obj-$(CONFIG_SAMA5D3) += mpddrc.o spl_atmel.o
obj-$(CONFIG_SAMA5D4) += mpddrc.o spl_atmel.o
obj-y += spl.o
endif

View File

@ -19,7 +19,7 @@ static inline void atmel_mpddr_op(int mode, u32 ram_address)
static int ddr2_decodtype_is_seq(u32 cr)
{
#if defined(CONFIG_SAMA5D3)
#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4)
if (cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED)
return 0;
#endif

View File

@ -12,12 +12,16 @@
#include <asm/arch/clk.h>
#include <spl.h>
#if defined(CONFIG_AT91SAM9_WATCHDOG)
void at91_disable_wdt(void) { }
#else
void at91_disable_wdt(void)
{
struct at91_wdt *wdt = (struct at91_wdt *)ATMEL_BASE_WDT;
writel(AT91_WDT_MR_WDDIS, &wdt->mr);
}
#endif
u32 spl_boot_device(void)
{

View File

@ -51,11 +51,23 @@ static void switch_to_main_crystal_osc(void)
while (!(readl(&pmc->mcfr) & AT91_PMC_MAINRDY))
;
#ifndef CONFIG_SAMA5D4
tmp = readl(&pmc->mor);
tmp &= ~AT91_PMC_MOR_MOSCRCEN;
tmp &= ~AT91_PMC_MOR_KEY(0xff);
tmp |= AT91_PMC_MOR_KEY(0x37);
writel(tmp, &pmc->mor);
#endif
}
__weak void matrix_init(void)
{
/* This only be used for sama5d4 soc now */
}
__weak void redirect_int_from_saic_to_aic(void)
{
/* This only be used for sama5d4 soc now */
}
void s_init(void)
@ -70,6 +82,10 @@ void s_init(void)
at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
matrix_init();
redirect_int_from_saic_to_aic();
timer_init();
board_early_init_f();

View File

@ -33,5 +33,6 @@ void at91_mck_init(u32 mckr);
void at91_spl_board_init(void);
void at91_disable_wdt(void);
void matrix_init(void);
void redirect_int_from_saic_to_aic(void);
#endif /* AT91_COMMON_H */

View File

@ -157,10 +157,8 @@ typedef struct at91_pmc {
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
@ -175,7 +173,7 @@ typedef struct at91_pmc {
#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x] */
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
@ -210,7 +208,7 @@ typedef struct at91_pmc {
#define AT91RM9200_PMC_MDIV_2 (1 << 8)
#define AT91RM9200_PMC_MDIV_3 (2 << 8)
#define AT91RM9200_PMC_MDIV_4 (3 << 8)
#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */
#define AT91SAM9_PMC_MDIV_2 (1 << 8)
#define AT91SAM9_PMC_MDIV_4 (2 << 8)
#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */
@ -230,8 +228,7 @@ typedef struct at91_pmc {
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */
#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */
#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */

View File

@ -13,6 +13,8 @@
#ifndef AT91_RSTC_H
#define AT91_RSTC_H
/* Reset Controller Status Register */
#define AT91_ASM_RSTC_SR (ATMEL_BASE_RSTC + 0x04)
#define AT91_ASM_RSTC_MR (ATMEL_BASE_RSTC + 0x08)
#ifndef __ASSEMBLY__

View File

@ -1,78 +0,0 @@
/*
* [origin: Linux kernel include/asm-arm/arch-at91/at91cap9.h]
*
* Copyright (C) 2007 Stelian Pop <stelian@popies.net>
* Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
* Copyright (C) 2007 Atmel Corporation.
*
* Common definitions.
* Based on AT91CAP9 datasheet revision B (Preliminary).
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef AT91CAP9_H
#define AT91CAP9_H
/*
* Peripheral identifiers/interrupts.
*/
#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
#define AT91_ID_SYS 1 /* System Peripherals */
#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */
#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */
#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */
#define AT91CAP9_ID_US0 8 /* USART 0 */
#define AT91CAP9_ID_US1 9 /* USART 1 */
#define AT91CAP9_ID_US2 10 /* USART 2 */
#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */
#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */
#define AT91CAP9_ID_CAN 13 /* CAN */
#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */
#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */
#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */
#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */
#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */
#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */
#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */
#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */
#define AT91CAP9_ID_EMAC 22 /* Ethernet */
#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */
#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */
#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */
#define AT91CAP9_ID_LCDC 26 /* LCD Controller */
#define AT91CAP9_ID_DMA 27 /* DMA Controller */
#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */
#define AT91CAP9_ID_UHP 29 /* USB Host Port */
#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
#define AT91_PIO_BASE 0xfffff200
#define AT91_PMC_BASE 0xfffffc00
#define AT91_RSTC_BASE 0xfffffd00
#define AT91_PIT_BASE 0xfffffd30
/*
* Internal Memory.
*/
#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */
#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */
#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */
#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
/*
* Cpu Name
*/
#define CONFIG_SYS_AT91_CPU_NAME "AT91CAP9"
#endif

View File

@ -1,129 +0,0 @@
/*
* [origin: Linux kernel include/asm-arm/arch-at91/at91cap9_matrix.h]
*
* Copyright (C) 2007 Stelian Pop <stelian@popies.net>
* Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
* Copyright (C) 2006 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91CAP9 datasheet revision B (Preliminary).
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef AT91CAP9_MATRIX_H
#define AT91CAP9_MATRIX_H
#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
#define AT91_MATRIX_ULBT_FOUR (2 << 0)
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */
#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */
#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */
#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */
#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_RCB2 (1 << 2)
#define AT91_MATRIX_RCB3 (1 << 3)
#define AT91_MATRIX_RCB4 (1 << 4)
#define AT91_MATRIX_RCB5 (1 << 5)
#define AT91_MATRIX_RCB6 (1 << 6)
#define AT91_MATRIX_RCB7 (1 << 7)
#define AT91_MATRIX_RCB8 (1 << 8)
#define AT91_MATRIX_RCB9 (1 << 9)
#define AT91_MATRIX_RCB10 (1 << 10)
#define AT91_MATRIX_RCB11 (1 << 11)
#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1)
#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4)
#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */
#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */
#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */
#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */
#endif

View File

@ -15,8 +15,6 @@
#include <asm/arch/at91sam9263_matrix.h>
#elif defined(CONFIG_AT91SAM9RL)
#include <asm/arch/at91sam9rl_matrix.h>
#elif defined(CONFIG_AT91CAP9)
#include <asm/arch/at91cap9_matrix.h>
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
#include <asm/arch/at91sam9g45_matrix.h>
#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)

View File

@ -23,8 +23,6 @@
# include <asm/arch/at91sam9g45.h>
#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
# include <asm/arch/at91sam9x5.h>
#elif defined(CONFIG_AT91CAP9)
# include <asm/arch/at91cap9.h>
#elif defined(CONFIG_SAMA5D3)
# include <asm/arch/sama5d3.h>
#elif defined(CONFIG_SAMA5D4)

View File

@ -0,0 +1,37 @@
/*
* Bus Matrix header file for the SAMA5 family
*
* Copyright (C) 2014 Atmel
* Bo Shen <voice.shen@atmel.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __SAMA5_MATRIX_H
#define __SAMA5_MATRIX_H
struct atmel_matrix {
u32 mcfg[16]; /* 0x00 ~ 0x3c: Master Configuration Register */
u32 scfg[16]; /* 0x40 ~ 0x7c: Slave Configuration Register */
u32 pras[16][2];/* 0x80 ~ 0xfc: Priority Register A/B */
u32 res1[20]; /* 0x100 ~ 0x14c */
u32 meier; /* 0x150: Master Error Interrupt Enable Register */
u32 meidr; /* 0x154: Master Error Interrupt Disable Register */
u32 meimr; /* 0x158: Master Error Interrupt Mask Register */
u32 mesr; /* 0x15c: Master Error Status Register */
u32 mear[16]; /* 0x160 ~ 0x19c: Master Error Address Register */
u32 res2[17]; /* 0x1A0 ~ 0x1E0 */
u32 wpmr; /* 0x1E4: Write Protection Mode Register */
u32 wpsr; /* 0x1E8: Write Protection Status Register */
u32 res3[5]; /* 0x1EC ~ 0x1FC */
u32 ssr[16]; /* 0x200 ~ 0x23c: Security Slave Register */
u32 sassr[16]; /* 0x240 ~ 0x27c: Security Areas Split Slave Register */
u32 srtsr[16]; /* 0x280 ~ 0x2bc: Security Region Top Slave */
u32 spselr[3]; /* 0x2c0 ~ 0x2c8: Security Peripheral Select Register */
};
/* Bit field in WPMR */
#define ATMEL_MATRIX_WPMR_WPKEY 0x4D415400
#define ATMEL_MATRIX_WPMR_WPEN 0x00000001
#endif

View File

@ -0,0 +1,38 @@
/*
* Special Function Register (SFR)
*
* Copyright (C) 2014 Atmel
* Bo Shen <voice.shen@atmel.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __SAMA5_SFR_H
#define __SAMA5_SFR_H
struct atmel_sfr {
u32 reserved1; /* 0x00 */
u32 ddrcfg; /* 0x04: DDR Configuration Register */
u32 reserved2; /* 0x08 */
u32 reserved3; /* 0x0c */
u32 ohciicr; /* 0x10: OHCI Interrupt Configuration Register */
u32 ohciisr; /* 0x14: OHCI Interrupt Status Register */
u32 reserved4[4]; /* 0x18 ~ 0x24 */
u32 secure; /* 0x28: Security Configuration Register */
u32 reserved5[5]; /* 0x2c ~ 0x3c */
u32 ebicfg; /* 0x40: EBI Configuration Register */
u32 reserved6[2]; /* 0x44 ~ 0x48 */
u32 sn0; /* 0x4c */
u32 sn1; /* 0x50 */
u32 aicredir; /* 0x54 */
};
/* Bit field in DDRCFG */
#define ATMEL_SFR_DDRCFG_FDQIEN 0x00010000
#define ATMEL_SFR_DDRCFG_FDQSIEN 0x00020000
/* Bit field in AICREDIR */
#define ATMEL_SFR_AICREDIR_KEY 0x5F67B102
#define ATMEL_SFR_AICREDIR_NSAIC 0x00000001
#endif

View File

@ -126,6 +126,8 @@
#define ATMEL_BASE_ADC 0xfc034000
#define ATMEL_BASE_TWI3 0xfc038000
#define ATMEL_BASE_MATRIX1 0xfc054000
#define ATMEL_BASE_SMC 0xfc05c000
#define ATMEL_BASE_PMECC (ATMEL_BASE_SMC + 0x070)
#define ATMEL_BASE_PMERRLOC (ATMEL_BASE_SMC + 0x500)

View File

@ -10,6 +10,7 @@
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/atmel_mpddrc.h>
#include <asm/arch/atmel_usba_udc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
@ -326,3 +327,87 @@ int board_eth_init(bd_t *bis)
return rc;
}
/* SPL */
#ifdef CONFIG_SPL_BUILD
void spl_board_init(void)
{
#ifdef CONFIG_SYS_USE_MMC
sama5d4_xplained_mci1_hw_init();
#elif CONFIG_SYS_USE_NANDFLASH
sama5d4_xplained_nand_hw_init();
#elif CONFIG_SYS_USE_SERIALFLASH
sama5d4_xplained_spi0_hw_init();
#endif
}
static void ddr2_conf(struct atmel_mpddr *ddr2)
{
ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
ATMEL_MPDDRC_CR_NR_ROW_14 |
ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
ATMEL_MPDDRC_CR_NB_8BANKS |
ATMEL_MPDDRC_CR_NDQS_DISABLED |
ATMEL_MPDDRC_CR_DECOD_INTERLEAVED |
ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
ddr2->rtr = 0x2b0;
ddr2->tpr0 = (8 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
10 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
25 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
23 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
2 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
}
void mem_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct atmel_mpddr ddr2;
ddr2_conf(&ddr2);
/* enable MPDDR clock */
at91_periph_clk_enable(ATMEL_ID_MPDDRC);
writel(0x4, &pmc->scer);
/* DDRAM2 Controller initialize */
ddr2_init(ATMEL_BASE_DDRCS, &ddr2);
}
void at91_pmc_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
u32 tmp;
tmp = AT91_PMC_PLLAR_29 |
AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
AT91_PMC_PLLXR_MUL(87) |
AT91_PMC_PLLXR_DIV(1);
at91_plla_init(tmp);
writel(0x0 << 8, &pmc->pllicpr);
tmp = AT91_PMC_MCKR_H32MXDIV |
AT91_PMC_MCKR_PLLADIV_2 |
AT91_PMC_MCKR_MDIV_3 |
AT91_PMC_MCKR_CSS_PLLA;
at91_mck_init(tmp);
}
#endif

View File

@ -10,6 +10,7 @@
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/atmel_mpddrc.h>
#include <asm/arch/atmel_usba_udc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
@ -325,3 +326,87 @@ int board_eth_init(bd_t *bis)
return rc;
}
/* SPL */
#ifdef CONFIG_SPL_BUILD
void spl_board_init(void)
{
#ifdef CONFIG_SYS_USE_MMC
sama5d4ek_mci1_hw_init();
#elif CONFIG_SYS_USE_NANDFLASH
sama5d4ek_nand_hw_init();
#elif CONFIG_SYS_USE_SERIALFLASH
sama5d4ek_spi0_hw_init();
#endif
}
static void ddr2_conf(struct atmel_mpddr *ddr2)
{
ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
ATMEL_MPDDRC_CR_NR_ROW_14 |
ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
ATMEL_MPDDRC_CR_NB_8BANKS |
ATMEL_MPDDRC_CR_NDQS_DISABLED |
ATMEL_MPDDRC_CR_DECOD_INTERLEAVED |
ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
ddr2->rtr = 0x2b0;
ddr2->tpr0 = (8 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
10 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
25 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
23 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
2 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
}
void mem_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct atmel_mpddr ddr2;
ddr2_conf(&ddr2);
/* enable MPDDR clock */
at91_periph_clk_enable(ATMEL_ID_MPDDRC);
writel(0x4, &pmc->scer);
/* DDRAM2 Controller initialize */
ddr2_init(ATMEL_BASE_DDRCS, &ddr2);
}
void at91_pmc_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
u32 tmp;
tmp = AT91_PMC_PLLAR_29 |
AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
AT91_PMC_PLLXR_MUL(87) |
AT91_PMC_PLLXR_DIV(1);
at91_plla_init(tmp);
writel(0x0 << 8, &pmc->pllicpr);
tmp = AT91_PMC_MCKR_H32MXDIV |
AT91_PMC_MCKR_PLLADIV_2 |
AT91_PMC_MCKR_MDIV_3 |
AT91_PMC_MCKR_CSS_PLLA;
at91_mck_init(tmp);
}
#endif

View File

@ -111,7 +111,7 @@ static int init_func_watchdog_init(void)
{
# if defined(CONFIG_HW_WATCHDOG) && (defined(CONFIG_BLACKFIN) || \
defined(CONFIG_M68K) || defined(CONFIG_MICROBLAZE) || \
defined(CONFIG_SH))
defined(CONFIG_SH) || defined(CONFIG_AT91SAM9_WATCHDOG))
hw_watchdog_init();
# endif
puts(" Watchdog enabled\n");

View File

@ -0,0 +1,3 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_MMC"
CONFIG_ARM=y
CONFIG_TARGET_AT91SAM9260EK=y

View File

@ -1,3 +0,0 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_MMC"
CONFIG_ARM=y
CONFIG_TARGET_AT91SAM9260EK=y

View File

@ -1,3 +1,4 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_SAMA5D4_XPLAINED=y

View File

@ -1,3 +1,4 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_SAMA5D4_XPLAINED=y

View File

@ -1,3 +1,4 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_SAMA5D4_XPLAINED=y

View File

@ -1,3 +1,4 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_SAMA5D4EK=y

View File

@ -1,3 +1,4 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_SAMA5D4EK=y

View File

@ -1,3 +1,4 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_SAMA5D4EK=y

View File

@ -44,6 +44,7 @@ struct atmel_nand_host {
u8 pmecc_corr_cap;
u16 pmecc_sector_size;
u32 pmecc_index_table_offset;
u32 pmecc_version;
int pmecc_bytes_per_sector;
int pmecc_sector_number;
@ -486,6 +487,10 @@ static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf,
int i, err_nbr, eccbytes;
uint8_t *buf_pos;
/* SAMA5D4 PMECC IP can correct errors for all 0xff page */
if (host->pmecc_version >= PMECC_VERSION_SAMA5D4)
goto normal_check;
eccbytes = nand_chip->ecc.bytes;
for (i = 0; i < eccbytes; i++)
if (ecc[i] != 0xff)
@ -961,6 +966,10 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
nand->ecc.write_page = atmel_nand_pmecc_write_page;
nand->ecc.strength = cap;
/* Check the PMECC ip version */
host->pmecc_version = pmecc_readl(host->pmerrloc, version);
dev_dbg(host->dev, "PMECC IP version is: %x\n", host->pmecc_version);
atmel_pmecc_core_init(mtd);
return 0;

View File

@ -123,6 +123,20 @@ struct pmecc_errloc_regs {
u32 sigma[25]; /* 0x28-0x88 Error Location Sigma Registers */
u32 el[24]; /* 0x8C-0xE8 Error Location Registers */
u32 reserved1[5]; /* 0xEC-0xFC Reserved */
/*
* 0x100-0x1F8:
* Reserved for AT91SAM9X5, AT91SAM9N12.
* HSMC registers for SAMA5D3, SAMA5D4.
*/
u32 reserved2[63];
/*
* 0x1FC:
* PMECC version for AT91SAM9X5, AT91SAM9N12.
* HSMC version for SAMA5D3, SAMA5D4. Can refer as PMECC version.
*/
u32 version;
};
/* For Error Location Configuration Register */
@ -137,6 +151,12 @@ struct pmecc_errloc_regs {
#define PMERRLOC_ERR_NUM_MASK (0x1f << 8)
#define PMERRLOC_CALC_DONE (1 << 0)
/* PMECC IP version */
#define PMECC_VERSION_SAMA5D4 0x113
#define PMECC_VERSION_SAMA5D3 0x112
#define PMECC_VERSION_AT91SAM9N12 0x102
#define PMECC_VERSION_AT91SAM9X5 0x101
/* Galois field dimension */
#define PMECC_GF_DIMENSION_13 13
#define PMECC_GF_DIMENSION_14 14

View File

@ -21,7 +21,7 @@
#define ATMEL_LCDC_GUARD_TIME 1
#endif
#if defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91CAP9)
#if defined(CONFIG_AT91SAM9263)
#define ATMEL_LCDC_FIFO_SIZE 2048
#else
#define ATMEL_LCDC_FIFO_SIZE 512

View File

@ -30,7 +30,11 @@
#define ticks_to_ms(t) (((t + 1) * 1000) >> 8)
/* Hardware timeout in seconds */
#if !defined(CONFIG_AT91_HW_WDT_TIMEOUT)
#define WDT_HW_TIMEOUT 2
#else
#define WDT_HW_TIMEOUT CONFIG_AT91_HW_WDT_TIMEOUT
#endif
/*
* Set the watchdog time interval in 1/256Hz (write-once)

View File

@ -90,7 +90,6 @@
#define CONFIG_CMD_PING 1
#define CONFIG_CMD_DHCP 1
#define CONFIG_CMD_NAND 1
#define CONFIG_CMD_MMC
#define CONFIG_CMD_FAT
#define CONFIG_CMD_USB 1
@ -133,14 +132,17 @@
# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK
#endif
/* DataFlash */
#ifndef CONFIG_AT91SAM9G20EK_2MMC
/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH 1
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
#define AT91_SPI_CLK 15000000
#else
/* Enable MMC. The MCCK is conflicted with DataFlash */
#define CONFIG_CMD_MMC
#endif
#ifdef CONFIG_AT91SAM9G20EK

View File

@ -203,11 +203,12 @@
"bootm 0x22000000"
#else /* CONFIG_SYS_USE_MMC */
/* bootstrap + u-boot + env + linux in mmc */
#define CONFIG_ENV_IS_IN_MMC
/* For FAT system, most cases it should be in the reserved sector */
#define CONFIG_ENV_OFFSET 0x2000
#define CONFIG_ENV_SIZE 0x1000
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_IS_IN_FAT
#define CONFIG_FAT_WRITE
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_FILE "uboot.env"
#define FAT_ENV_DEVICE_AND_PART "0"
#define CONFIG_ENV_SIZE 0x4000
#endif
#ifdef CONFIG_SYS_USE_MMC

View File

@ -169,13 +169,14 @@
"bootz 0x22000000 - 0x21000000"
#elif CONFIG_SYS_USE_MMC
/* bootstrap + u-boot + env in sd card */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET 0x2000
#define CONFIG_ENV_SIZE 0x1000
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_FILE "uboot.env"
#define FAT_ENV_DEVICE_AND_PART "0"
#define CONFIG_ENV_SIZE 0x4000
#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d3_xplained.dtb; " \
"fatload mmc 0:1 0x22000000 zImage; " \
"bootz 0x22000000 - 0x21000000"
#define CONFIG_SYS_MMC_ENV_DEV 0
#else
#define CONFIG_ENV_IS_NOWHERE
#endif

View File

@ -191,6 +191,7 @@
#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
#define CONFIG_CMD_FAT
#define CONFIG_FAT_WRITE
#endif
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
@ -215,13 +216,14 @@
"bootm 0x22000000 - 0x21000000"
#elif CONFIG_SYS_USE_MMC
/* bootstrap + u-boot + env in sd card */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET 0x2000
#define CONFIG_ENV_SIZE 0x1000
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_FILE "uboot.env"
#define FAT_ENV_DEVICE_AND_PART "0"
#define CONFIG_ENV_SIZE 0x4000
#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \
"fatload mmc 0:1 0x22000000 uImage; " \
"bootm 0x22000000 - 0x21000000"
#define CONFIG_SYS_MMC_ENV_DEV 0
#else
#define CONFIG_ENV_IS_NOWHERE
#endif

View File

@ -20,7 +20,9 @@
#define CONFIG_ARCH_CPU_INIT
#ifndef CONFIG_SPL_BUILD
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO
@ -66,8 +68,12 @@
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
#define CONFIG_SYS_SDRAM_SIZE 0x20000000
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_INIT_SP_ADDR 0x210000
#else
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
@ -221,4 +227,54 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
/* SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x200000
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
#ifdef CONFIG_SYS_USE_MMC
#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
#elif CONFIG_SYS_USE_NANDFLASH
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_BASE
#define CONFIG_PMECC_CAP 8
#define CONFIG_PMECC_SECTOR_SIZE 512
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_SIZE 0x1000
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_OOBSIZE 224
#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
#elif CONFIG_SYS_USE_SERIALFLASH
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
#endif
#endif

View File

@ -20,7 +20,9 @@
#define CONFIG_ARCH_CPU_INIT
#ifndef CONFIG_SPL_BUILD
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO
@ -66,8 +68,12 @@
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
#define CONFIG_SYS_SDRAM_SIZE 0x20000000
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_INIT_SP_ADDR 0x210000
#else
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
@ -219,4 +225,54 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
/* SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x200000
#define CONFIG_SPL_MAX_SIZE 0x10000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
#ifdef CONFIG_SYS_USE_MMC
#define CONFIG_SPL_LDSCRIPT arch/arm/cpu/at91-common/u-boot-spl.lds
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
#elif CONFIG_SYS_USE_NANDFLASH
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_BASE
#define CONFIG_PMECC_CAP 8
#define CONFIG_PMECC_SECTOR_SIZE 512
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_SIZE 0x1000
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_OOBSIZE 224
#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
#elif CONFIG_SYS_USE_SERIALFLASH
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
#endif
#endif

View File

@ -21,9 +21,6 @@
*/
#include <asm/hardware.h>
#define MACH_TYPE_TAURUS 2067
#define MACH_TYPE_AXM 2068
#define CONFIG_SYS_GENERIC_BOARD
#if defined(CONFIG_SPL_BUILD)
@ -121,6 +118,12 @@
#define CONFIG_RMII
#define CONFIG_AT91_WANTS_COMMON_PHY
#define CONFIG_AT91SAM9_WATCHDOG
#if !defined(CONFIG_SPL_BUILD)
/* Enable the watchdog */
#define CONFIG_HW_WATCHDOG
#endif
/* USB */
#if defined(CONFIG_BOARD_TAURUS)
#define CONFIG_USB_ATMEL