doc/README.falcon: Clarify steps slightly.
Make it clear that we need to load a legacy-formatted (aka uImage) kernel into memory as well as the DT if used before using "spl export". Cc: Yebio Mesfin <ymesfin@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
This commit is contained in:
parent
49b633b3d3
commit
cfd6de9cf9
|
@ -31,9 +31,10 @@ informed to load it before running the kernel.
|
||||||
To boot the kernel, these steps under a Falcon-aware U-Boot are required:
|
To boot the kernel, these steps under a Falcon-aware U-Boot are required:
|
||||||
|
|
||||||
1. Boot the board into U-Boot.
|
1. Boot the board into U-Boot.
|
||||||
Use the "spl export" command to generate the kernel parameters area or the DT.
|
After loading the desired legacy-format kernel image into memory (and DT as
|
||||||
U-Boot runs as when it boots the kernel, but stops before passing the control
|
well, if used), use the "spl export" command to generate the kernel parameters
|
||||||
to the kernel.
|
area or the DT. U-Boot runs as when it boots the kernel, but stops before
|
||||||
|
passing the control to the kernel.
|
||||||
|
|
||||||
2. Save the prepared snapshot into persistent media.
|
2. Save the prepared snapshot into persistent media.
|
||||||
The address where to save it must be configured into board configuration
|
The address where to save it must be configured into board configuration
|
||||||
|
|
Loading…
Reference in New Issue