ARM: tegra: pack pinmux data tables tighter

Use smaller fields in the Tegra pinmux structures in order to pack the
data tables into a smaller space. This saves around 1-3KB for the SPL
and around 3-8KB for the main build of U-Boot, depending on the board,
which SoC it uses, and how many pinmux table entries there are.

In order to pack PMUX_FUNC_* into a smaller space, don't hard-code the
values of PMUX_FUNC_RSVD* to values which require 16 bits to store them,
but instead let their values be assigned automatically, so they end up
fitting into 8 bits.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

arch/arm/cpu/tegra-common/pinmux-common.c

@@ -14,8 +14,7 @@
 
 /* return 1 if a pmux_func is in range */
 #define pmux_func_isvalid(func) \
-	((((func) >= 0) && ((func) < PMUX_FUNC_COUNT)) || \
+	(((func) >= 0) && ((func) < PMUX_FUNC_COUNT))
-	 (((func) >= PMUX_FUNC_RSVD1) && ((func) <= PMUX_FUNC_RSVD4)))
 
 /* return 1 if a pin_pupd_is in range */
 #define pmux_pin_pupd_isvalid(pupd) \
@@ -97,8 +96,8 @@ void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func)
 	assert(pmux_pingrp_isvalid(pin));
 	assert(pmux_func_isvalid(func));
 
-	if (func & PMUX_FUNC_RSVD1) {
+	if (func >= PMUX_FUNC_RSVD1) {
-		mux = func & 3;
+		mux = (func - PMUX_FUNC_RSVD1) & 3;
 	} else {
 		/* Search for the appropriate function */
 		for (i = 0; i < 4; i++) {

arch/arm/include/asm/arch-tegra/pinmux.h

@@ -64,18 +64,18 @@ enum pmux_pin_rcv_sel {
  * available is pinmux_config_table() to configure a list of pins.
  */
 struct pmux_pingrp_config {
-	enum pmux_pingrp pingrp;	/* pin group PMUX_PINGRP_...        */
+	u32 pingrp:16;		/* pin group PMUX_PINGRP_...        */
-	enum pmux_func func;		/* function to assign PMUX_FUNC_... */
+	u32 func:8;		/* function to assign PMUX_FUNC_... */
-	enum pmux_pull pull;		/* pull up/down/normal PMUX_PULL_...*/
+	u32 pull:2;		/* pull up/down/normal PMUX_PULL_...*/
-	enum pmux_tristate tristate;	/* tristate or normal PMUX_TRI_...  */
+	u32 tristate:2;		/* tristate or normal PMUX_TRI_...  */
 #ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC
-	enum pmux_pin_io io;		/* input or output PMUX_PIN_...     */
+	u32 io:2;		/* input or output PMUX_PIN_...     */
-	enum pmux_pin_lock lock;	/* lock enable/disable PMUX_PIN...  */
+	u32 lock:2;		/* lock enable/disable PMUX_PIN...  */
-	enum pmux_pin_od od;		/* open-drain or push-pull driver   */
+	u32 od:2;		/* open-drain or push-pull driver   */
-	enum pmux_pin_ioreset ioreset;	/* input/output reset PMUX_PIN...   */
+	u32 ioreset:2;		/* input/output reset PMUX_PIN...   */
 #ifdef TEGRA_PMX_HAS_RCV_SEL
-	enum pmux_pin_rcv_sel rcv_sel;	/* select between High and Normal  */
+	u32 rcv_sel:2;		/* select between High and Normal  */
-					/* VIL/VIH receivers */
+				/* VIL/VIH receivers */
 #endif
 #endif
 };
@@ -151,14 +151,14 @@ enum pmux_hsm {
  * This defines the configuration for a pin group's pad control config
  */
 struct pmux_drvgrp_config {
-	enum pmux_drvgrp drvgrp;	/* pin group PMUX_DRVGRP_x   */
+	u32 drvgrp:16;	/* pin group PMUX_DRVGRP_x   */
-	int slwf;			/* falling edge slew         */
+	u32 slwf:3;		/* falling edge slew         */
-	int slwr;			/* rising edge slew          */
+	u32 slwr:3;		/* rising edge slew          */
-	int drvup;			/* pull-up drive strength    */
+	u32 drvup:8;		/* pull-up drive strength    */
-	int drvdn;			/* pull-down drive strength  */
+	u32 drvdn:8;		/* pull-down drive strength  */
-	enum pmux_lpmd lpmd;		/* low-power mode selection  */
+	u32 lpmd:3;		/* low-power mode selection  */
-	enum pmux_schmt schmt;		/* schmidt enable            */
+	u32 schmt:2;		/* schmidt enable            */
-	enum pmux_hsm hsm;		/* high-speed mode enable    */
+	u32 hsm:2;		/* high-speed mode enable    */
 };
 
 /**
@@ -173,10 +173,10 @@ void pinmux_config_drvgrp_table(const struct pmux_drvgrp_config *config,
 #endif /* TEGRA_PMX_HAS_DRVGRPS */
 
 struct pmux_pingrp_desc {
-	enum pmux_func funcs[4];
+	u8 funcs[4];
 #if defined(CONFIG_TEGRA20)
-	u32 ctl_id;
+	u8 ctl_id;
-	u32 pull_id;
+	u8 pull_id;
 #endif /* CONFIG_TEGRA20 */
 };
 

arch/arm/include/asm/arch-tegra114/pinmux.h

@@ -305,11 +305,11 @@ enum pmux_func {
 	PMUX_FUNC_VI,
 	PMUX_FUNC_VI_ALT1,
 	PMUX_FUNC_VI_ALT3,
+	PMUX_FUNC_RSVD1,
+	PMUX_FUNC_RSVD2,
+	PMUX_FUNC_RSVD3,
+	PMUX_FUNC_RSVD4,
 	PMUX_FUNC_COUNT,
-	PMUX_FUNC_RSVD1 = 0x8000,
-	PMUX_FUNC_RSVD2 = 0x8001,
-	PMUX_FUNC_RSVD3 = 0x8002,
-	PMUX_FUNC_RSVD4 = 0x8003,
 };
 
 #define TEGRA_PMX_HAS_PIN_IO_BIT_ETC

arch/arm/include/asm/arch-tegra124/pinmux.h

@@ -327,11 +327,11 @@ enum pmux_func {
 	PMUX_FUNC_VI_ALT3,
 	PMUX_FUNC_VIMCLK2,
 	PMUX_FUNC_VIMCLK2_ALT,
+	PMUX_FUNC_RSVD1,
+	PMUX_FUNC_RSVD2,
+	PMUX_FUNC_RSVD3,
+	PMUX_FUNC_RSVD4,
 	PMUX_FUNC_COUNT,
-	PMUX_FUNC_RSVD1 = 0x8000,
-	PMUX_FUNC_RSVD2 = 0x8001,
-	PMUX_FUNC_RSVD3 = 0x8002,
-	PMUX_FUNC_RSVD4 = 0x8003,
 };
 
 #define TEGRA_PMX_HAS_PIN_IO_BIT_ETC

arch/arm/include/asm/arch-tegra20/pinmux.h

@@ -225,11 +225,11 @@ enum pmux_func {
 	PMUX_FUNC_VI,
 	PMUX_FUNC_VI_SENSOR_CLK,
 	PMUX_FUNC_XIO,
+	PMUX_FUNC_RSVD1,
+	PMUX_FUNC_RSVD2,
+	PMUX_FUNC_RSVD3,
+	PMUX_FUNC_RSVD4,
 	PMUX_FUNC_COUNT,
-	PMUX_FUNC_RSVD1 = 0x8000,
-	PMUX_FUNC_RSVD2 = 0x8001,
-	PMUX_FUNC_RSVD3 = 0x8002,
-	PMUX_FUNC_RSVD4 = 0x8003,
 };
 
 #include <asm/arch-tegra/pinmux.h>

arch/arm/include/asm/arch-tegra30/pinmux.h

@@ -383,11 +383,11 @@ enum pmux_func {
 	PMUX_FUNC_VI_ALT1,
 	PMUX_FUNC_VI_ALT2,
 	PMUX_FUNC_VI_ALT3,
+	PMUX_FUNC_RSVD1,
+	PMUX_FUNC_RSVD2,
+	PMUX_FUNC_RSVD3,
+	PMUX_FUNC_RSVD4,
 	PMUX_FUNC_COUNT,
-	PMUX_FUNC_RSVD1 = 0x8000,
-	PMUX_FUNC_RSVD2 = 0x8001,
-	PMUX_FUNC_RSVD3 = 0x8002,
-	PMUX_FUNC_RSVD4 = 0x8003,
 };
 
 #define TEGRA_PMX_HAS_PIN_IO_BIT_ETC