serial: nsl16550: add hw flow control support

keystone serial hw support hw flow control. This patch
enables hw flow control for keystone EVMs as an optional
feature based on CONFIG_SERIAL_HW_FLOW_CONTROL.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
This commit is contained in:
Karicheri, Muralidharan 2014-04-09 15:38:46 -04:00 committed by Tom Rini
parent 8abd053cf0
commit d57dee5787
3 changed files with 11 additions and 0 deletions

4
README
View File

@ -751,6 +751,10 @@ The following options need to be configured:
boot loader that has already initialized the UART. Define this
variable to flush the UART at init time.
CONFIG_SERIAL_HW_FLOW_CONTROL
Define this variable to enable hw flow control in serial driver.
Current user of this option is drivers/serial/nsl16550.c driver
- Console Interface:
Depending on board, define exactly one serial port

View File

@ -33,6 +33,12 @@
#if defined(CONFIG_K2HK_EVM)
#define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE 0
#define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0))
#undef UART_MCRVAL
#ifdef CONFIG_SERIAL_HW_FLOW_CONTROL
#define UART_MCRVAL (UART_MCR_RTS | UART_MCR_AFE)
#else
#define UART_MCRVAL (UART_MCR_RTS)
#endif
#endif
#ifndef CONFIG_SYS_NS16550_IER

View File

@ -100,6 +100,7 @@ typedef struct NS16550 *NS16550_t;
#define UART_MCR_OUT1 0x04 /* Out 1 */
#define UART_MCR_OUT2 0x08 /* Out 2 */
#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
#define UART_MCR_AFE 0x20 /* Enable auto-RTS/CTS */
#define UART_MCR_DMA_EN 0x04
#define UART_MCR_TX_DFR 0x08