sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

Add support for Freescale M5271 processor

This commit is contained in:
Zachary P. Landau 2006-01-26 17:35:56 -05:00
parent c4b465f63e
commit eacbd31775
11 changed files with 157 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
CHANGELOG
View File

@ -2,6 +2,9 @@
Changes since U-Boot 1.1.4:
======================================================================
* Add support for Freescale M5271 processor
Patch by Zachary Landau, 26 Jan 2006
* Fix 28F256J3A support on PM520 board
(without bank-switching only 32 MB can be accessed)

40
cpu/mcf52x2/cpu.c
View File

@ -25,6 +25,11 @@
#include <watchdog.h>
#include <command.h>
#ifdef CONFIG_M5271
#include <asm/immap_5271.h>
#include <asm/m5271.h>
#endif
#ifdef CONFIG_M5272
#include <asm/immap_5272.h>
#include <asm/m5272.h>
@ -38,6 +43,41 @@
#include <asm/m5249.h>
#endif
#ifdef CONFIG_M5271
int checkcpu (void)
{
puts ("CPU: MOTOROLA Coldfire MCF5271\n");
return 0;
}
int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) {
mbar_writeByte(MCF_RCM_RCR,
MCF_RCM_RCR_SOFTRST | MCF_RCM_RCR_FRCRSTOUT);
return 0;
};
#if defined(CONFIG_WATCHDOG)
void watchdog_reset (void)
{
mbar_writeShort(MCF_WTM_WSR, 0x5555);
mbar_writeShort(MCF_WTM_WSR, 0xAAAA);
}
int watchdog_disable (void)
{
mbar_writeShort(MCF_WTM_WCR, 0);
return (0);
}
int watchdog_init (void)
{
mbar_writeShort(MCF_WTM_WCNTR, CONFIG_WATCHDOG_TIMEOUT);
mbar_writeShort(MCF_WTM_WCR, MCF_WTM_WCR_EN);
return (0);
}
#endif /* #ifdef CONFIG_WATCHDOG */
#endif
#ifdef CONFIG_M5272
int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) {

37
cpu/mcf52x2/cpu_init.c
View File

@ -24,6 +24,11 @@
#include <common.h>
#include <watchdog.h>
#ifdef CONFIG_M5271
#include <asm/m5271.h>
#include <asm/immap_5271.h>
#endif
#ifdef CONFIG_M5272
#include <asm/m5272.h>
#include <asm/immap_5272.h>
@ -38,6 +43,38 @@
#include <asm/m5249.h>
#endif
#if defined(CONFIG_M5271)
void cpu_init_f (void)
{
#ifndef CONFIG_WATCHDOG
/* Disable the watchdog if we aren't using it */
mbar_writeShort(MCF_WTM_WCR, 0);
#endif
/* Set clockspeed to 100MHz */
mbar_writeShort(MCF_FMPLL_SYNCR,
MCF_FMPLL_SYNCR_MFD(0) | MCF_FMPLL_SYNCR_RFD(0));
while (!mbar_readByte(MCF_FMPLL_SYNSR) & MCF_FMPLL_SYNSR_LOCK);
/* Enable UART pins */
mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD |
MCF_GPIO_PAR_UART_U0RXD |
MCF_GPIO_PAR_UART_U1RXD_UART1 |
MCF_GPIO_PAR_UART_U1TXD_UART1);
/* Enable Ethernet pins */
mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C);
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r (void)
{
return (0);
}
#endif
#if defined(CONFIG_M5272)
/*
* Breath some life into the CPU...

22
cpu/mcf52x2/fec.c
View File

@ -25,6 +25,11 @@
#include <malloc.h>
#include <asm/fec.h>
#ifdef CONFIG_M5271
#include <asm/m5271.h>
#include <asm/immap_5271.h>
#endif
#ifdef CONFIG_M5272
#include <asm/m5272.h>
#include <asm/immap_5272.h>
@ -41,7 +46,7 @@
#ifdef CONFIG_M5272
#define FEC_ADDR (CFG_MBAR + 0x840)
#endif
#ifdef CONFIG_M5282
#if defined(CONFIG_M5282) || defined(CONFIG_M5271)
#define FEC_ADDR (CFG_MBAR + 0x1000)
#endif
@ -240,10 +245,22 @@ int eth_init (bd_t * bd)
#endif
#undef ea
#ifdef CONFIG_M5271
/* Clear multicast address hash table
*/
fecp->fec_ghash_table_high = 0;
fecp->fec_ghash_table_low = 0;
/* Clear individual address hash table
*/
fecp->fec_ihash_table_high = 0;
fecp->fec_ihash_table_low = 0;
#else
/* Clear multicast address hash table
*/
fecp->fec_hash_table_high = 0;
fecp->fec_hash_table_low = 0;
#endif
/* Set maximum receive buffer size.
*/
@ -295,6 +312,9 @@ int eth_init (bd_t * bd)
fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
#else /* Half duplex mode */
fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
#ifdef CONFIG_M5271
fecp->fec_r_cntrl |= (PKT_MAXBUF_SIZE << 16); /* set max frame length */
#endif
fecp->fec_x_cntrl = 0;
#endif
/* Set MII speed */

7
cpu/mcf52x2/interrupts.c
View File

@ -27,6 +27,11 @@
#include <watchdog.h>
#include <asm/processor.h>
#ifdef CONFIG_M5271
#include <asm/m5271.h>
#include <asm/immap_5271.h>
#endif
#ifdef CONFIG_M5272
#include <asm/m5272.h>
#include <asm/immap_5272.h>
@ -171,7 +176,7 @@ int interrupt_init (void)
}
#endif
#ifdef CONFIG_M5282
#if defined(CONFIG_M5282) || defined(CONFIG_M5271)
int interrupt_init (void)
{
return 0;

8
cpu/mcf52x2/serial.c
View File

@ -26,6 +26,10 @@
#include <asm/mcfuart.h>
#ifdef CONFIG_M5271
#include <asm/m5271.h>
#endif
#ifdef CONFIG_M5272
#include <asm/m5272.h>
#endif
@ -46,7 +50,7 @@
void rs_serial_setbaudrate(int port,int baudrate)
{
#if defined(CONFIG_M5272) || defined(CONFIG_M5249)
#if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5271)
volatile unsigned char *uartp;
double clock, fraction;
@ -61,8 +65,10 @@ void rs_serial_setbaudrate(int port,int baudrate)
uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff); /* set msb baud */
uartp[MCFUART_UBG2] = ((int)clock & 0xff); /* set lsb baud */
#ifndef CONFIG_M5271
uartp[MCFUART_UFPD] = ((int)fraction & 0xf); /* set baud fraction adjust */
#endif
#endif
};
void rs_serial_init(int port,int baudrate)

34
cpu/mcf52x2/start.S
View File

@ -55,7 +55,11 @@
*/
_vectors:
#ifndef CONFIG_M5271
.long 0x00000000, _START
#else
.long 0x00000000, 0x400 /* Flash offset is 0 until we setup CS0 */
#endif
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
@ -124,26 +128,42 @@ _start:
movec %d0, %RAMBAR0
#endif /* #if defined(CONFIG_M5272) || defined(CONFIG_M5249) */
#ifdef CONFIG_M5282
#if defined(CONFIG_M5282) || defined(CONFIG_M5271)
/* Initialize IPSBAR */
move.l #(CFG_MBAR + 1), %d0 /* set IPSBAR address + valid flag */
move.l %d0, 0x40000000
#ifdef CONFIG_M5282
/* Initialize FLASHBAR: locate internal Flash and validate it */
move.l #(CFG_INT_FLASH_BASE + 0x21), %d0
movec %d0, %RAMBAR0
#endif
/* Initialize RAMBAR1: locate SRAM and validate it */
move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0
movec %d0, %RAMBAR1
#ifdef CONFIG_M5271
move.l #(_flash_setup-CFG_FLASH_BASE), %a0
move.l #(_flash_setup_end-CFG_FLASH_BASE), %a1
move.l #(CFG_INIT_RAM_ADDR), %a2
_copy_flash:
move.l (%a0)+, (%a2)+
cmp.l %a0, %a1
bgt.s _copy_flash
#endif
jmp CFG_INIT_RAM_ADDR
_after_flash_copy:
#endif
#if 0
/* invalidate and disable cache */
move.l #0x01000000, %d0 /* Invalidate cache cmd */
movec %d0, %CACR /* Invalidate cache */
move.l #0, %d0
movec %d0, %ACR0
movec %d0, %ACR1
#endif
/* set stackpointer to end of internal ram to get some stackspace for the first c-code */
move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp
@ -158,6 +178,18 @@ _start:
/*------------------------------------------------------------------------------*/
#ifdef CONFIG_M5271
_flash_setup:
move.l #0x1000, %d0
move.w %d0, 0x40000080
move.l #0x2180, %d0
move.w %d0, 0x4000008A
move.l #0x3f0001, %d0
move.l %d0, 0x40000084
jmp _after_flash_copy.L
_flash_setup_end:
#endif
/*
* void relocate_code (addr_sp, gd, addr_moni)
*

2
include/asm-m68k/mcftimer.h
View File

@ -45,7 +45,7 @@
#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
#define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */
#define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */
#elif defined(CONFIG_M5282)
#elif defined(CONFIG_M5282) | defined(CONFIG_M5271)
#define MCFTIMER_BASE1 0x150000 /* Base address of TIMER1 */
#define MCFTIMER_BASE2 0x160000 /* Base address of TIMER2 */
#define MCFTIMER_BASE3 0x170000 /* Base address of TIMER4 */

2
include/asm-m68k/mcfuart.h
View File

@ -46,7 +46,7 @@
#define MCFUART_BASE1 0x140 /* Base address of UART1 */
#define MCFUART_BASE2 0x180 /* Base address of UART2 */
#endif
#elif defined(CONFIG_M5282)
#elif defined(CONFIG_M5282) || defined(CONFIG_M5271)
#define MCFUART_BASE1 0x200 /* Base address of UART1 */
#define MCFUART_BASE2 0x240 /* Base address of UART2 */
#define MCFUART_BASE3 0x280 /* Base address of UART3 */

2
include/asm-m68k/ptrace.h
View File

@ -43,7 +43,7 @@ struct pt_regs {
ulong a4;
ulong a5;
ulong a6;
#if defined(CONFIG_M5272) || defined(CONFIG_M5282) || defined(CONFIG_M5249)
#if defined(CONFIG_M5272) || defined(CONFIG_M5282) || defined(CONFIG_M5249) || defined(CONFIG_M5271)
unsigned format : 4; /* frame format specifier */
unsigned vector : 12; /* vector offset */
unsigned short sr;

9
lib_m68k/time.c
View File

@ -27,6 +27,11 @@
#include <asm/mcftimer.h>
#ifdef CONFIG_M5271
#include <asm/m5271.h>
#include <asm/immap_5271.h>
#endif
#ifdef CONFIG_M5272
#include <asm/m5272.h>
#include <asm/immap_5272.h>
@ -43,7 +48,7 @@
static ulong timestamp;
#ifdef CONFIG_M5282
#if defined(CONFIG_M5282) || defined(CONFIG_M5271)
static unsigned short lastinc;
#endif
@ -127,7 +132,7 @@ void set_timer (ulong t)
}
#endif
#if defined(CONFIG_M5282)
#if defined(CONFIG_M5282) || defined(CONFIG_M5271)
void udelay(unsigned long usec)
{