sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze

This commit is contained in:
Tom Rini 2016-05-24 08:20:43 -04:00
parent c98dc5a133 ad5b580126
commit ec8fb48ce9
69 changed files with 1004 additions and 163 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/Kconfig
View File

@ -594,6 +594,7 @@ config ARCH_ZYNQMP
select DM
select OF_CONTROL
select DM_SERIAL
select SUPPORT_SPL
config TEGRA
bool "NVIDIA Tegra"

1
arch/arm/cpu/armv8/zynqmp/Makefile
View File

@ -9,3 +9,4 @@ obj-y += clk.o
obj-y += cpu.o
obj-$(CONFIG_MP) += mp.o
obj-y += slcr.o
obj-$(CONFIG_SPL_BUILD) += spl.o

107
arch/arm/cpu/armv8/zynqmp/spl.c Normal file
View File

@ -0,0 +1,107 @@
/*
* Copyright 2015 - 2016 Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <debug_uart.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/spl.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
void board_init_f(ulong dummy)
{
psu_init();
board_early_init_r();
#ifdef CONFIG_DEBUG_UART
/* Uart debug for sure */
debug_uart_init();
puts("Debug uart enabled\n"); /* or printch() */
#endif
/* Delay is required for clocks to be propagated */
udelay(1000000);
/* Clear the BSS */
memset(__bss_start, 0, __bss_end - __bss_start);
/* No need to call timer init - it is empty for ZynqMP */
board_init_r(NULL, 0);
}
#ifdef CONFIG_SPL_BOARD_INIT
void spl_board_init(void)
{
preloader_console_init();
board_init();
}
#endif
u32 spl_boot_device(void)
{
u32 reg = 0;
u8 bootmode;
reg = readl(&crlapb_base->boot_mode);
bootmode = reg & BOOT_MODES_MASK;
switch (bootmode) {
case JTAG_MODE:
return BOOT_DEVICE_RAM;
#ifdef CONFIG_SPL_MMC_SUPPORT
case EMMC_MODE:
case SD_MODE:
case SD_MODE1:
return BOOT_DEVICE_MMC1;
#endif
default:
printf("Invalid Boot Mode:0x%x\n", bootmode);
break;
}
return 0;
}
u32 spl_boot_mode(void)
{
switch (spl_boot_device()) {
case BOOT_DEVICE_RAM:
return 0;
case BOOT_DEVICE_MMC1:
return MMCSD_MODE_FS;
default:
puts("spl: error: unsupported device\n");
hang();
}
}
__weak void psu_init(void)
{
/*
* This function is overridden by the one in
* board/xilinx/zynqmp/(platform)/psu_init_gpl.c, if it exists.
*/
}
#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{
return 0;
}
#endif
#ifdef CONFIG_SPL_LOAD_FIT
int board_fit_config_name_match(const char *name)
{
/* Just empty function now - can't decide what to choose */
debug("%s: %s\n", __func__, name);
return 0;
}
#endif

2
arch/arm/dts/zynq-7000.dtsi
View File

@ -251,7 +251,7 @@
slcr: slcr@f8000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
reg = <0xF8000000 0x1000>;
ranges;
clkc: clkc@100 {

9
arch/arm/dts/zynqmp.dtsi
View File

@ -253,9 +253,9 @@
compatible = "arm,gic-400", "arm,cortex-a15-gic";
#interrupt-cells = <3>;
reg = <0x0 0xf9010000 0x10000>,
<0x0 0xf902f000 0x2000>,
<0x0 0xf9020000 0x20000>,
<0x0 0xf9040000 0x20000>,
<0x0 0xf906f000 0x2000>;
<0x0 0xf9060000 0x20000>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <1 9 0xf04>;
@ -264,6 +264,7 @@
amba: amba {
compatible = "simple-bus";
u-boot,dm-pre-reloc;
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0 0 0xffffffff>;
@ -674,6 +675,7 @@
};
sdhci0: sdhci@ff160000 {
u-boot,dm-pre-reloc;
compatible = "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
@ -685,6 +687,7 @@
};
sdhci1: sdhci@ff170000 {
u-boot,dm-pre-reloc;
compatible = "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
@ -776,6 +779,7 @@
};
uart0: serial@ff000000 {
u-boot,dm-pre-reloc;
compatible = "cdns,uart-r1p12", "xlnx,xuartps";
status = "disabled";
interrupt-parent = <&gic>;
@ -786,6 +790,7 @@
};
uart1: serial@ff010000 {
u-boot,dm-pre-reloc;
compatible = "cdns,uart-r1p12", "xlnx,xuartps";
status = "disabled";
interrupt-parent = <&gic>;

2
arch/arm/include/asm/arch-zynqmp/sys_proto.h
View File

@ -17,4 +17,6 @@ int zynq_slcr_get_mio_pin_status(const char *periph);
unsigned int zynqmp_get_silicon_version(void);
void psu_init(void);
#endif /* _ASM_ARCH_SYS_PROTO_H */

48
arch/arm/mach-zynq/Kconfig
View File

@ -1,41 +1,5 @@
if ARCH_ZYNQ
config ZYNQ_CUSTOM_INIT
bool "Use custom ps7_init provided by Xilinx tool"
help
U-Boot includes ps7_init_gpl.[ch] for some Zynq board variants.
If you want to override them with customized ones
or ps7_init code for your board is missing, please say Y here
and add ones into board/xilinx/zynq/custom_hw_platform/ directory.
choice
prompt "Xilinx Zynq board select"
default TARGET_ZYNQ_ZC702
config TARGET_ZYNQ_ZED
bool "Zynq ZedBoard"
config TARGET_ZYNQ_MICROZED
bool "Zynq MicroZed"
config TARGET_ZYNQ_PICOZED
bool "Zynq PicoZed"
config TARGET_ZYNQ_ZC702
bool "Zynq ZC702 Board"
config TARGET_ZYNQ_ZC706
bool "Zynq ZC706 Board"
config TARGET_ZYNQ_ZC770
bool "Zynq ZC770 Board"
select ZYNQ_CUSTOM_INIT
config TARGET_ZYNQ_ZYBO
bool "Zynq Zybo Board"
endchoice
config SYS_BOARD
default "zynq"
@ -46,11 +10,11 @@ config SYS_SOC
default "zynq"
config SYS_CONFIG_NAME
default "zynq_zed" if TARGET_ZYNQ_ZED
default "zynq_microzed" if TARGET_ZYNQ_MICROZED
default "zynq_picozed" if TARGET_ZYNQ_PICOZED
default "zynq_zc70x" if TARGET_ZYNQ_ZC702 || TARGET_ZYNQ_ZC706
default "zynq_zc770" if TARGET_ZYNQ_ZC770
default "zynq_zybo" if TARGET_ZYNQ_ZYBO
string "Board configuration name"
default "zynq-common"
help
This option contains information about board configuration name.
Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
will be used for board configuration.
endif

25
arch/arm/mach-zynq/spl.c
View File

@ -90,3 +90,28 @@ __weak void ps7_init(void)
* board/xilinx/zynq/(platform)/ps7_init_gpl.c, if it exists.
*/
}
__weak int ps7_post_config(void)
{
/*
* This function is overridden by the one in
* board/xilinx/zynq/(platform)/ps7_init_gpl.c, if it exists.
*/
return 0;
}
void spl_board_prepare_for_boot(void)
{
ps7_post_config();
debug("SPL bye\n");
}
#ifdef CONFIG_SPL_LOAD_FIT
int board_fit_config_name_match(const char *name)
{
/* Just empty function now - can't decide what to choose */
debug("%s: %s\n", __func__, name);
return 0;
}
#endif

12
board/xilinx/zynq/Makefile
View File

@ -7,17 +7,7 @@
obj-y := board.o
# Copied from Xilinx SDK 2014.4
hw-platform-$(CONFIG_TARGET_ZYNQ_ZED) := zed_hw_platform
hw-platform-$(CONFIG_TARGET_ZYNQ_MICROZED) := MicroZed_hw_platform
hw-platform-$(CONFIG_TARGET_ZYNQ_ZC702) := ZC702_hw_platform
hw-platform-$(CONFIG_TARGET_ZYNQ_ZC706) := ZC706_hw_platform
hw-platform-$(CONFIG_TARGET_ZYNQ_ZYBO) := zybo_hw_platform
# If you want to use customized ps7_init_gpl.c/h,
# enable CONFIG_ZYNQ_CUSTOM_INIT and put them into custom_hw_platform/.
# This line must be placed at the bottom of the list because
# it takes precedence over the default ones.
hw-platform-$(CONFIG_ZYNQ_CUSTOM_INIT) := custom_hw_platform
hw-platform-y :=$(shell echo $(CONFIG_DEFAULT_DEVICE_TREE))
init-objs := $(if $(wildcard $(srctree)/$(src)/$(hw-platform-y)/ps7_init_gpl.c),\
$(hw-platform-y)/ps7_init_gpl.o)

1
board/xilinx/zynq/custom_hw_platform/.gitignore vendored
View File

@ -1 +0,0 @@
ps7_init_gpl.[ch]

0
board/xilinx/zynq/MicroZed_hw_platform/ps7_init_gpl.c → board/xilinx/zynq/zynq-microzed/ps7_init_gpl.c
View File

0
board/xilinx/zynq/MicroZed_hw_platform/ps7_init_gpl.h → board/xilinx/zynq/zynq-microzed/ps7_init_gpl.h
View File

0
board/xilinx/zynq/ZC702_hw_platform/ps7_init_gpl.c → board/xilinx/zynq/zynq-zc702/ps7_init_gpl.c
View File

0
board/xilinx/zynq/ZC702_hw_platform/ps7_init_gpl.h → board/xilinx/zynq/zynq-zc702/ps7_init_gpl.h
View File

0
board/xilinx/zynq/ZC706_hw_platform/ps7_init_gpl.c → board/xilinx/zynq/zynq-zc706/ps7_init_gpl.c
View File

0
board/xilinx/zynq/ZC706_hw_platform/ps7_init_gpl.h → board/xilinx/zynq/zynq-zc706/ps7_init_gpl.h
View File

0
board/xilinx/zynq/zed_hw_platform/ps7_init_gpl.c → board/xilinx/zynq/zynq-zed/ps7_init_gpl.c
View File

0
board/xilinx/zynq/zed_hw_platform/ps7_init_gpl.h → board/xilinx/zynq/zynq-zed/ps7_init_gpl.h
View File

0
board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.c → board/xilinx/zynq/zynq-zybo/ps7_init_gpl.c
View File

0
board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.h → board/xilinx/zynq/zynq-zybo/ps7_init_gpl.h
View File

23
board/xilinx/zynqmp/Makefile
View File

@ -1,8 +1,29 @@
#
# (C) Copyright 2014 - 2015 Xilinx, Inc.
# (C) Copyright 2014 - 2016 Xilinx, Inc.
# Michal Simek <michal.simek@xilinx.com>
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y := zynqmp.o
hw-platform-y :=$(shell echo $(CONFIG_SYS_CONFIG_NAME))
init-objs := $(if $(wildcard $(srctree)/$(src)/$(hw-platform-y)/psu_init_gpl.c),\
$(hw-platform-y)/psu_init_gpl.o)
ifeq ($(init-objs),)
ifneq ($(wildcard $(srctree)/$(src)/psu_init_gpl.c),)
init-objs := psu_init_gpl.o
$(if $(CONFIG_SPL_BUILD),\
$(warning Put custom psu_init_gpl.c/h to board/xilinx/zynqmp/custom_hw_platform/))
endif
endif
obj-$(CONFIG_SPL_BUILD) += $(init-objs)
# Suppress "warning: function declaration isn't a prototype"
CFLAGS_REMOVE_psu_init_gpl.o := -Wstrict-prototypes
# To include xil_io.h
CFLAGS_psu_init_gpl.o := -I$(srctree)/$(src)

35
board/xilinx/zynqmp/xil_io.h Normal file
View File

@ -0,0 +1,35 @@
/*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef XIL_IO_H /* prevent circular inclusions */
#define XIL_IO_H
/* FIXME remove this when vivado is fixed */
#include <asm/io.h>
#define xil_printf(...)
void Xil_ICacheEnable(void)
{}
void Xil_DCacheEnable(void)
{}
void Xil_ICacheDisable(void)
{}
void Xil_DCacheDisable(void)
{}
void Xil_Out32(unsigned long addr, unsigned long val)
{
writel(val, addr);
}
int Xil_In32(unsigned long addr)
{
return readl(addr);
}
#endif /* XIL_IO_H */

17
board/xilinx/zynqmp/zynqmp.c
View File

@ -15,6 +15,7 @@
#include <asm/io.h>
#include <usb.h>
#include <dwc3-uboot.h>
#include <i2c.h>
DECLARE_GLOBAL_DATA_PTR;
@ -50,6 +51,22 @@ int board_early_init_r(void)
return 0;
}
int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
{
#if defined(CONFIG_ZYNQ_GEM_EEPROM_ADDR) && \
defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET) && \
defined(CONFIG_ZYNQ_EEPROM_BUS)
i2c_set_bus_num(CONFIG_ZYNQ_EEPROM_BUS);
if (eeprom_read(CONFIG_ZYNQ_GEM_EEPROM_ADDR,
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET,
ethaddr, 6))
printf("I2C EEPROM MAC address read failed\n");
#endif
return 0;
}
#if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
/*
* fdt_get_reg - Fill buffer by information from DT

10
common/bootm.c
View File

@ -246,6 +246,16 @@ int bootm_find_images(int flag, int argc, char * const argv[])
#endif
#if IMAGE_ENABLE_FIT
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_XILINX)
/* find bitstreams */
ret = boot_get_fpga(argc, argv, &images, IH_ARCH_DEFAULT,
NULL, NULL);
if (ret) {
printf("FPGA image is corrupted or invalid\n");
return 1;
}
#endif
/* find all of the loadables */
ret = boot_get_loadable(argc, argv, &images, IH_ARCH_DEFAULT,
NULL, NULL);

11
common/image-fit.c
View File

@ -422,7 +422,8 @@ void fit_image_print(const void *fit, int image_noffset, const char *p)
}
if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
(type == IH_TYPE_FIRMWARE) || (type == IH_TYPE_RAMDISK)) {
(type == IH_TYPE_FIRMWARE) || (type == IH_TYPE_RAMDISK) ||
(type == IH_TYPE_FPGA)) {
ret = fit_image_get_load(fit, image_noffset, &load);
printf("%s Load Address: ", p);
if (ret)
@ -1483,6 +1484,10 @@ void fit_conf_print(const void *fit, int noffset, const char *p)
if (uname)
printf("%s FDT: %s\n", p, uname);
uname = (char *)fdt_getprop(fit, noffset, FIT_FPGA_PROP, NULL);
if (uname)
printf("%s FPGA: %s\n", p, uname);
/* Print out all of the specified loadables */
for (loadables_index = 0;
fdt_get_string_index(fit, noffset,
@ -1567,6 +1572,8 @@ static const char *fit_get_image_type_property(int type)
return FIT_SETUP_PROP;
case IH_TYPE_LOADABLE:
return FIT_LOADABLE_PROP;
case IH_TYPE_FPGA:
return FIT_FPGA_PROP;
}
return "unknown";
@ -1681,7 +1688,7 @@ int fit_image_load(bootm_headers_t *images, ulong addr,
fit_image_check_type(fit, noffset,
IH_TYPE_KERNEL_NOLOAD));
os_ok = image_type == IH_TYPE_FLATDT ||
os_ok = image_type == IH_TYPE_FLATDT || IH_TYPE_FPGA ||
fit_image_check_os(fit, noffset, IH_OS_LINUX) ||
fit_image_check_os(fit, noffset, IH_OS_OPENRTOS);

94
common/image.c
View File

@ -32,6 +32,8 @@
#if IMAGE_ENABLE_FIT || IMAGE_ENABLE_OF_LIBFDT
#include <libfdt.h>
#include <fdt_support.h>
#include <fpga.h>
#include <xilinx.h>
#endif
#include <u-boot/md5.h>
@ -159,6 +161,8 @@ static const table_entry_t uimage_type[] = {
{ IH_TYPE_RKSD, "rksd", "Rockchip SD Boot Image" },
{ IH_TYPE_RKSPI, "rkspi", "Rockchip SPI Boot Image" },
{ IH_TYPE_ZYNQIMAGE, "zynqimage", "Xilinx Zynq Boot Image" },
{ IH_TYPE_ZYNQMPIMAGE, "zynqmpimage", "Xilinx ZynqMP Boot Image" },
{ IH_TYPE_FPGA, "fpga", "FPGA Image" },
{ -1, "", "", },
};
@ -1210,6 +1214,96 @@ int boot_get_setup(bootm_headers_t *images, uint8_t arch,
}
#if IMAGE_ENABLE_FIT
#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_XILINX)
int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, const ulong *ld_start, ulong * const ld_len)
{
ulong tmp_img_addr, img_data, img_len;
void *buf;
int conf_noffset;
int fit_img_result;
char *uname, *name;
int err;
int devnum = 0; /* TODO support multi fpga platforms */
const fpga_desc * const desc = fpga_get_desc(devnum);
xilinx_desc *desc_xilinx = desc->devdesc;
/* Check to see if the images struct has a FIT configuration */
if (!genimg_has_config(images)) {
debug("## FIT configuration was not specified\n");
return 0;
}
/*
* Obtain the os FIT header from the images struct
* copy from dataflash if needed
*/
tmp_img_addr = map_to_sysmem(images->fit_hdr_os);
tmp_img_addr = genimg_get_image(tmp_img_addr);
buf = map_sysmem(tmp_img_addr, 0);
/*
* Check image type. For FIT images get FIT node
* and attempt to locate a generic binary.
*/
switch (genimg_get_format(buf)) {
case IMAGE_FORMAT_FIT:
conf_noffset = fit_conf_get_node(buf, images->fit_uname_cfg);
err = fdt_get_string_index(buf, conf_noffset, FIT_FPGA_PROP, 0,
(const char **)&uname);
if (err < 0) {
debug("## FPGA image is not specified\n");
return 0;
}
fit_img_result = fit_image_load(images,
tmp_img_addr,
(const char **)&uname,
&(images->fit_uname_cfg),
arch,
IH_TYPE_FPGA,
BOOTSTAGE_ID_FPGA_INIT,
FIT_LOAD_OPTIONAL_NON_ZERO,
&img_data, &img_len);
debug("FPGA image (%s) loaded to 0x%lx/size 0x%lx\n",
uname, img_data, img_len);
if (fit_img_result < 0) {
/* Something went wrong! */
return fit_img_result;
}
if (img_len >= desc_xilinx->size) {
name = "full";
err = fpga_loadbitstream(devnum, (char *)img_data,
img_len, BIT_FULL);
if (err)
err = fpga_load(devnum, (const void *)img_data,
img_len, BIT_FULL);
} else {
name = "partial";
err = fpga_loadbitstream(devnum, (char *)img_data,
img_len, BIT_PARTIAL);
if (err)
err = fpga_load(devnum, (const void *)img_data,
img_len, BIT_PARTIAL);
}
printf(" Programming %s bitstream... ", name);
if (err)
printf("failed\n");
else
printf("OK\n");
break;
default:
printf("The given image format is not supported (corrupt?)\n");
return 1;
}
return 0;
}
#endif
int boot_get_loadable(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, const ulong *ld_start, ulong * const ld_len)
{

51
common/spl/spl.c
View File

@ -64,6 +64,11 @@ __weak void spl_board_prepare_for_linux(void)
/* Nothing to do! */
}
__weak void spl_board_prepare_for_boot(void)
{
/* Nothing to do! */
}
void spl_set_header_raw_uboot(void)
{
spl_image.size = CONFIG_SYS_MONITOR_LEN;
@ -135,20 +140,47 @@ __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
image_entry();
}
#ifndef CONFIG_SPL_LOAD_FIT_ADDRESS
# define CONFIG_SPL_LOAD_FIT_ADDRESS 0
#endif
#ifdef CONFIG_SPL_RAM_DEVICE
static ulong spl_ram_load_read(struct spl_load_info *load, ulong sector,
ulong count, void *buf)
{
debug("%s: sector %lx, count %lx, buf %lx\n",
__func__, sector, count, (ulong)buf);
memcpy(buf, (void *)(CONFIG_SPL_LOAD_FIT_ADDRESS + sector), count);
return count;
}
static int spl_ram_load_image(void)
{
const struct image_header *header;
struct image_header *header;
/*
* Get the header. It will point to an address defined by handoff
* which will tell where the image located inside the flash. For
* now, it will temporary fixed to address pointed by U-Boot.
*/
header = (struct image_header *)
(CONFIG_SYS_TEXT_BASE - sizeof(struct image_header));
header = (struct image_header *)CONFIG_SPL_LOAD_FIT_ADDRESS;
spl_parse_image_header(header);
if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
image_get_magic(header) == FDT_MAGIC) {
struct spl_load_info load;
debug("Found FIT\n");
load.bl_len = 1;
load.read = spl_ram_load_read;
spl_load_simple_fit(&load, 0, header);
} else {
debug("Legacy image\n");
/*
* Get the header. It will point to an address defined by
* handoff which will tell where the image located inside
* the flash. For now, it will temporary fixed to address
* pointed by U-Boot.
*/
header = (struct image_header *)
(CONFIG_SYS_TEXT_BASE - sizeof(struct image_header));
spl_parse_image_header(header);
}
return 0;
}
@ -404,6 +436,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
#endif
debug("loaded - jumping to U-Boot...");
spl_board_prepare_for_boot();
jump_to_image_no_args(&spl_image);
}

9
configs/xilinx_zynqmp_ep_defconfig
View File

@ -40,12 +40,21 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_EMBED=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_DM_MMC=y
CONFIG_ZYNQ_SDHCI=y
CONFIG_NAND_ARASAN=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_DM_ETH=y
CONFIG_ZYNQ_GEM=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_ZYNQ=y
CONFIG_DEBUG_UART_BASE=0xff000000
CONFIG_DEBUG_UART_CLOCK=25000000
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_USB=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y

8
configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
View File

@ -8,6 +8,7 @@ CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm015-dc1"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MEMTEST=y
@ -30,6 +31,8 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_EMBED=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_DM_MMC=y
CONFIG_ZYNQ_SDHCI=y
@ -40,6 +43,11 @@ CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_ETH=y
CONFIG_ZYNQ_GEM=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_ZYNQ=y
CONFIG_DEBUG_UART_BASE=0xff000000
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_USB=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y

3
configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig
View File

@ -8,6 +8,7 @@ CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm016-dc2"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MEMTEST=y
@ -29,6 +30,8 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_EMBED=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_DM_MMC=y
CONFIG_NAND_ARASAN=y

3
configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig
View File

@ -7,6 +7,7 @@ CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm019-dc5"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MEMTEST=y
@ -25,6 +26,8 @@ CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_EMBED=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_DM_MMC=y
CONFIG_ZYNQ_SDHCI=y

8
configs/xilinx_zynqmp_zcu102_defconfig
View File

@ -7,6 +7,7 @@ CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MEMTEST=y
@ -29,6 +30,8 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_EMBED=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_DM_MMC=y
CONFIG_ZYNQ_SDHCI=y
CONFIG_SPI_FLASH=y
@ -38,6 +41,11 @@ CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_ETH=y
CONFIG_ZYNQ_GEM=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_ZYNQ=y
CONFIG_DEBUG_UART_BASE=0xff000000
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_USB=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y

8
configs/xilinx_zynqmp_zcu102_revB_defconfig
View File

@ -7,6 +7,7 @@ CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-revB"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ZynqMP> "
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MEMTEST=y
@ -29,6 +30,8 @@ CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_EMBED=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_DM_MMC=y
CONFIG_ZYNQ_SDHCI=y
CONFIG_SPI_FLASH=y
@ -38,6 +41,11 @@ CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_ETH=y
CONFIG_ZYNQ_GEM=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_ZYNQ=y
CONFIG_DEBUG_UART_BASE=0xff000000
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_USB=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y

2
configs/zynq_microzed_defconfig
View File

@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_microzed"
CONFIG_ARCH_ZYNQ=y
CONFIG_TARGET_ZYNQ_MICROZED=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-microzed"
CONFIG_SPL=y
CONFIG_FIT=y

2
configs/zynq_picozed_defconfig
View File

@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_picozed"
CONFIG_ARCH_ZYNQ=y
CONFIG_TARGET_ZYNQ_PICOZED=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-picozed"
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y

1
configs/zynq_zc702_defconfig
View File

@ -1,4 +1,5 @@
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_zc70x"
CONFIG_ARCH_ZYNQ=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc702"
CONFIG_SPL=y

2
configs/zynq_zc706_defconfig
View File

@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_zc70x"
CONFIG_ARCH_ZYNQ=y
CONFIG_TARGET_ZYNQ_ZC706=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc706"
CONFIG_SPL=y
CONFIG_FIT=y

2
configs/zynq_zc770_xm010_defconfig
View File

@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_zc770"
CONFIG_ARCH_ZYNQ=y
CONFIG_TARGET_ZYNQ_ZC770=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm010"
CONFIG_SPL=y
CONFIG_FIT=y

2
configs/zynq_zc770_xm011_defconfig
View File

@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_zc770"
CONFIG_ARCH_ZYNQ=y
CONFIG_TARGET_ZYNQ_ZC770=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm011"
CONFIG_SPL=y
CONFIG_FIT=y

2
configs/zynq_zc770_xm012_defconfig
View File

@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_zc770"
CONFIG_ARCH_ZYNQ=y
CONFIG_TARGET_ZYNQ_ZC770=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm012"
CONFIG_SPL=y
CONFIG_FIT=y

2
configs/zynq_zc770_xm013_defconfig
View File

@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_zc770"
CONFIG_ARCH_ZYNQ=y
CONFIG_TARGET_ZYNQ_ZC770=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm013"
CONFIG_SPL=y
CONFIG_FIT=y

2
configs/zynq_zed_defconfig
View File

@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_zed"
CONFIG_ARCH_ZYNQ=y
CONFIG_TARGET_ZYNQ_ZED=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-zed"
CONFIG_SPL=y
CONFIG_FIT=y

2
configs/zynq_zybo_defconfig
View File

@ -1,6 +1,6 @@
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="zynq_zybo"
CONFIG_ARCH_ZYNQ=y
CONFIG_TARGET_ZYNQ_ZYBO=y
CONFIG_DEFAULT_DEVICE_TREE="zynq-zybo"
CONFIG_SPL=y
CONFIG_FIT=y

67
doc/uImage.FIT/multi-with-fpga.its Normal file
View File

@ -0,0 +1,67 @@
/*
* U-Boot uImage source file with multiple kernels, ramdisks and FDT blobs
* This example makes use of the 'loadables' field
*/
/dts-v1/;
/ {
description = "Configuration to load fpga before Kernel";
#address-cells = <1>;
images {
fdt@1 {
description = "zc706";
data = /incbin/("/tftpboot/devicetree.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
load = <0x10000000>;
hash@1 {
algo = "md5";
};
};
fpga@1 {
description = "FPGA";
data = /incbin/("/tftpboot/download.bit");
type = "fpga";
arch = "arm";
compression = "none";
load = <0x30000000>;
hash@1 {
algo = "md5";
};
};
linux_kernel@1 {
description = "Linux";
data = /incbin/("/tftpboot/zImage");
type = "kernel";
arch = "arm";
os = "linux";
compression = "none";
load = <0x8000>;
entry = <0x8000>;
hash@1 {
algo = "md5";
};
};
};
configurations {
default = "config@2";
config@1 {
description = "Linux";
kernel = "linux_kernel@1";
fdt = "fdt@1";
};
config@2 {
description = "Linux with fpga";
kernel = "linux_kernel@1";
fdt = "fdt@1";
fpga = "fpga@1";
};
};
};

3
doc/uImage.FIT/source_file_format.txt
View File

@ -236,6 +236,7 @@ o config@1
|- kernel = "kernel sub-node unit name"
|- ramdisk = "ramdisk sub-node unit name"
|- fdt = "fdt sub-node unit-name"
|- fpga = "fpga sub-node unit-name"
|- loadables = "loadables sub-node unit-name"
@ -251,6 +252,8 @@ o config@1
"fdt type").
- setup : Unit name of the corresponding setup binary (used for booting
an x86 kernel). This contains the setup.bin file built by the kernel.
- fpga : Unit name of the corresponding fpga bitstream blob
(component image node of a "fpga type").
- loadables : Unit name containing a list of additional binaries to be
loaded at their given locations. "loadables" is a comma-separated list
of strings. U-Boot will load each binary at its given start-address.

2
drivers/fpga/fpga.c
View File

@ -120,7 +120,7 @@ static int fpga_dev_info(int devnum)
}
/*
* fgpa_init is usually called from misc_init_r() and MUST be called
* fpga_init is usually called from misc_init_r() and MUST be called
* before any of the other fpga functions are used.
*/
void fpga_init(void)

22
drivers/gpio/zynq_gpio.c
View File

@ -299,11 +299,33 @@ static int zynq_gpio_direction_output(struct udevice *dev, unsigned gpio,
return 0;
}
static int zynq_gpio_get_function(struct udevice *dev, unsigned offset)
{
u32 reg;
unsigned int bank_num, bank_pin_num;
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
if (check_gpio(offset, dev) < 0)
return -1;
zynq_gpio_get_bank_pin(offset, &bank_num, &bank_pin_num, dev);
/* set the GPIO pin as output */
reg = readl(priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
reg &= BIT(bank_pin_num);
if (reg)
return GPIOF_OUTPUT;
else
return GPIOF_INPUT;
}
static const struct dm_gpio_ops gpio_zynq_ops = {
.direction_input = zynq_gpio_direction_input,
.direction_output = zynq_gpio_direction_output,
.get_value = zynq_gpio_get_value,
.set_value = zynq_gpio_set_value,
.get_function = zynq_gpio_get_function,
};
static const struct udevice_id zynq_gpio_ids[] = {

38
drivers/net/phy/broadcom.c
View File

@ -84,11 +84,14 @@ static int bcm54xx_parse_status(struct phy_device *phydev)
static int bcm54xx_startup(struct phy_device *phydev)
{
/* Read the Status (2x to make sure link is right) */
genphy_update_link(phydev);
bcm54xx_parse_status(phydev);
int ret;
return 0;
/* Read the Status (2x to make sure link is right) */
ret = genphy_update_link(phydev);
if (ret)
return ret;
return bcm54xx_parse_status(phydev);
}
/* Broadcom BCM5482S */
@ -139,11 +142,14 @@ static int bcm5482_config(struct phy_device *phydev)
static int bcm_cygnus_startup(struct phy_device *phydev)
{
/* Read the Status (2x to make sure link is right) */
genphy_update_link(phydev);
genphy_parse_link(phydev);
int ret;
return 0;
/* Read the Status (2x to make sure link is right) */
ret = genphy_update_link(phydev);
if (ret)
return ret;
return genphy_parse_link(phydev);
}
static int bcm_cygnus_config(struct phy_device *phydev)
@ -239,17 +245,21 @@ static u32 bcm5482_parse_serdes_sr(struct phy_device *phydev)
*/
static int bcm5482_startup(struct phy_device *phydev)
{
int ret;
if (bcm5482_is_serdes(phydev)) {
bcm5482_parse_serdes_sr(phydev);
phydev->port = PORT_FIBRE;
} else {
/* Wait for auto-negotiation to complete or fail */
genphy_update_link(phydev);
/* Parse BCM54xx copper aux status register */
bcm54xx_parse_status(phydev);
return 0;
}
return 0;
/* Wait for auto-negotiation to complete or fail */
ret = genphy_update_link(phydev);
if (ret)
return ret;
/* Parse BCM54xx copper aux status register */
return bcm54xx_parse_status(phydev);
}
static struct phy_driver BCM5461S_driver = {

9
drivers/net/phy/davicom.c
View File

@ -60,10 +60,13 @@ static int dm9161_parse_status(struct phy_device *phydev)
static int dm9161_startup(struct phy_device *phydev)
{
genphy_update_link(phydev);
dm9161_parse_status(phydev);
int ret;
return 0;
ret = genphy_update_link(phydev);
if (ret)
return ret;
return dm9161_parse_status(phydev);
}
static struct phy_driver DM9161_driver = {

10
drivers/net/phy/et1011c.c
View File

@ -79,9 +79,13 @@ static int et1011c_parse_status(struct phy_device *phydev)
static int et1011c_startup(struct phy_device *phydev)
{
genphy_update_link(phydev);
et1011c_parse_status(phydev);
return 0;
int ret;
ret = genphy_update_link(phydev);
if (ret)
return ret;
return et1011c_parse_status(phydev);
}
static struct phy_driver et1011c_driver = {

9
drivers/net/phy/lxt.c
View File

@ -49,10 +49,13 @@ static int lxt971_parse_status(struct phy_device *phydev)
static int lxt971_startup(struct phy_device *phydev)
{
genphy_update_link(phydev);
lxt971_parse_status(phydev);
int ret;
return 0;
ret = genphy_update_link(phydev);
if (ret)
return ret;
return lxt971_parse_status(phydev);
}
static struct phy_driver LXT971_driver = {

39
drivers/net/phy/marvell.c
View File

@ -103,7 +103,7 @@ static int m88e1011s_config(struct phy_device *phydev)
/* Parse the 88E1011's status register for speed and duplex
* information
*/
static uint m88e1xxx_parse_status(struct phy_device *phydev)
static int m88e1xxx_parse_status(struct phy_device *phydev)
{
unsigned int speed;
unsigned int mii_reg;
@ -120,7 +120,7 @@ static uint m88e1xxx_parse_status(struct phy_device *phydev)
if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
puts(" TIMEOUT !\n");
phydev->link = 0;
break;
return -ETIMEDOUT;
}
if ((i++ % 1000) == 0)
@ -162,10 +162,13 @@ static uint m88e1xxx_parse_status(struct phy_device *phydev)
static int m88e1011s_startup(struct phy_device *phydev)
{
genphy_update_link(phydev);
m88e1xxx_parse_status(phydev);
int ret;
return 0;
ret = genphy_update_link(phydev);
if (ret)
return ret;
return m88e1xxx_parse_status(phydev);
}
/* Marvell 88E1111S */
@ -349,22 +352,21 @@ static int m88e1118_config(struct phy_device *phydev)
/* Change Page Number */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000);
genphy_config_aneg(phydev);
phy_reset(phydev);
return 0;
return genphy_config_aneg(phydev);
}
static int m88e1118_startup(struct phy_device *phydev)
{
int ret;
/* Change Page Number */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000);
genphy_update_link(phydev);
m88e1xxx_parse_status(phydev);
ret = genphy_update_link(phydev);
if (ret)
return ret;
return 0;
return m88e1xxx_parse_status(phydev);
}
/* Marvell 88E1121R */
@ -421,12 +423,15 @@ static int m88e1145_config(struct phy_device *phydev)
static int m88e1145_startup(struct phy_device *phydev)
{
genphy_update_link(phydev);
int ret;
ret = genphy_update_link(phydev);
if (ret)
return ret;
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_LED_CONTROL,
MIIM_88E1145_PHY_LED_DIRECT);
m88e1xxx_parse_status(phydev);
return 0;
return m88e1xxx_parse_status(phydev);
}
/* Marvell 88E1149S */

7
drivers/net/phy/micrel.c
View File

@ -181,7 +181,12 @@ static struct phy_driver KS8721_driver = {
static int ksz90xx_startup(struct phy_device *phydev)
{
unsigned phy_ctl;
genphy_update_link(phydev);
int ret;
ret = genphy_update_link(phydev);
if (ret)
return ret;
phy_ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ90xx_PHY_CTL);
if (phy_ctl & MIIM_KSZ90xx_PHYCTL_DUPLEX)

18
drivers/net/phy/natsemi.c
View File

@ -93,10 +93,13 @@ static int dp83865_parse_status(struct phy_device *phydev)
static int dp83865_startup(struct phy_device *phydev)
{
genphy_update_link(phydev);
dp83865_parse_status(phydev);
int ret;
return 0;
ret = genphy_update_link(phydev);
if (ret)
return ret;
return dp83865_parse_status(phydev);
}
@ -134,10 +137,13 @@ static int dp83848_parse_status(struct phy_device *phydev)
static int dp83848_startup(struct phy_device *phydev)
{
genphy_update_link(phydev);
dp83848_parse_status(phydev);
int ret;
return 0;
ret = genphy_update_link(phydev);
if (ret)
return ret;
return dp83848_parse_status(phydev);
}
static struct phy_driver DP83848_driver = {

15
drivers/net/phy/phy.c
View File

@ -248,7 +248,7 @@ int genphy_update_link(struct phy_device *phydev)
if (i > PHY_ANEG_TIMEOUT) {
printf(" TIMEOUT !\n");
phydev->link = 0;
return 0;
return -ETIMEDOUT;
}
if (ctrlc()) {
@ -431,10 +431,13 @@ int genphy_config(struct phy_device *phydev)
int genphy_startup(struct phy_device *phydev)
{
genphy_update_link(phydev);
genphy_parse_link(phydev);
int ret;
return 0;
ret = genphy_update_link(phydev);
if (ret)
return ret;
return genphy_parse_link(phydev);
}
int genphy_shutdown(struct phy_device *phydev)
@ -876,9 +879,7 @@ __weak int board_phy_config(struct phy_device *phydev)
int phy_config(struct phy_device *phydev)
{
/* Invoke an optional board-specific helper */
board_phy_config(phydev);
return 0;
return board_phy_config(phydev);
}
int phy_shutdown(struct phy_device *phydev)

32
drivers/net/phy/realtek.c
View File

@ -208,28 +208,38 @@ static int rtl8211f_parse_status(struct phy_device *phydev)
static int rtl8211x_startup(struct phy_device *phydev)
{
/* Read the Status (2x to make sure link is right) */
genphy_update_link(phydev);
rtl8211x_parse_status(phydev);
int ret;
return 0;
/* Read the Status (2x to make sure link is right) */
ret = genphy_update_link(phydev);
if (ret)
return ret;
return rtl8211x_parse_status(phydev);
}
static int rtl8211e_startup(struct phy_device *phydev)
{
genphy_update_link(phydev);
genphy_parse_link(phydev);
int ret;
return 0;
ret = genphy_update_link(phydev);
if (ret)
return ret;
return genphy_parse_link(phydev);
}
static int rtl8211f_startup(struct phy_device *phydev)
{
/* Read the Status (2x to make sure link is right) */
genphy_update_link(phydev);
rtl8211f_parse_status(phydev);
int ret;
return 0;
/* Read the Status (2x to make sure link is right) */
ret = genphy_update_link(phydev);
if (ret)
return ret;
/* Read the Status (2x to make sure link is right) */
return rtl8211f_parse_status(phydev);
}
/* Support for RTL8211B PHY */

10
drivers/net/phy/smsc.c
View File

@ -34,9 +34,13 @@ static int smsc_parse_status(struct phy_device *phydev)
static int smsc_startup(struct phy_device *phydev)
{
genphy_update_link(phydev);
smsc_parse_status(phydev);
return 0;
int ret;
ret = genphy_update_link(phydev);
if (ret)
return ret;
return smsc_parse_status(phydev);
}
static struct phy_driver lan8700_driver = {

8
drivers/net/phy/vitesse.c
View File

@ -112,10 +112,12 @@ static int vitesse_parse_status(struct phy_device *phydev)
static int vitesse_startup(struct phy_device *phydev)
{
genphy_update_link(phydev);
vitesse_parse_status(phydev);
int ret;
return 0;
ret = genphy_update_link(phydev);
if (ret)
return ret;
return vitesse_parse_status(phydev);
}
static int cis8204_config(struct phy_device *phydev)

6
drivers/net/xilinx_emaclite.c
View File

@ -250,7 +250,7 @@ static void emaclite_stop(struct udevice *dev)
static int setup_phy(struct udevice *dev)
{
int i;
int i, ret;
u16 phyreg;
struct xemaclite *emaclite = dev_get_priv(dev);
struct phy_device *phydev;
@ -302,7 +302,9 @@ static int setup_phy(struct udevice *dev)
phydev->advertising = supported;
emaclite->phydev = phydev;
phy_config(phydev);
phy_startup(phydev);
ret = phy_startup(phydev);
if (ret)
return ret;
if (!phydev->link) {
printf("%s: No link.\n", phydev->dev->name);

8
drivers/net/zynq_gem.c
View File

@ -352,14 +352,14 @@ static int zynq_phy_init(struct udevice *dev)
priv->phydev->supported = supported | ADVERTISED_Pause |
ADVERTISED_Asym_Pause;
priv->phydev->advertising = priv->phydev->supported;
phy_config(priv->phydev);
return 0;
return phy_config(priv->phydev);
}
static int zynq_gem_init(struct udevice *dev)
{
u32 i, nwconfig;
int ret;
unsigned long clk_rate = 0;
struct zynq_gem_priv *priv = dev_get_priv(dev);
struct zynq_gem_regs *regs = priv->iobase;
@ -427,7 +427,9 @@ static int zynq_gem_init(struct udevice *dev)
priv->init++;
}
phy_startup(priv->phydev);
ret = phy_startup(priv->phydev);
if (ret)
return ret;
if (!priv->phydev->link) {
printf("%s: No link.\n", priv->phydev->dev->name);

1
include/bootstage.h
View File

@ -198,6 +198,7 @@ enum bootstage_id {
BOOTSTAGE_ID_ACCUM_SCSI,
BOOTSTAGE_ID_ACCUM_SPI,
BOOTSTAGE_ID_ACCUM_DECOMP,
BOOTSTAGE_ID_FPGA_INIT,
/* a few spare for the user, from here */
BOOTSTAGE_ID_USER,

59
include/configs/xilinx_zynqmp.h
View File

@ -41,7 +41,7 @@
# define CONFIG_IDENT_STRING " Xilinx ZynqMP"
#endif
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_INIT_SP_ADDR 0xfffffffc
/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
#if !defined(COUNTER_FREQUENCY)
@ -65,6 +65,9 @@
#define CONFIG_CMD_ENV
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
#ifndef CONFIG_SPL_BUILD
# define CONFIG_ISO_PARTITION
#endif
#define CONFIG_MP
/* BOOTP options */
@ -74,10 +77,24 @@
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_MAY_FAIL
#define CONFIG_BOOTP_SERVERIP
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_PXE
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
/* Diff from config_distro_defaults.h */
#define CONFIG_SUPPORT_RAW_INITRD
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_AUTO_COMPLETE
/* PXE */
#define CONFIG_CMD_PXE
#define CONFIG_MENU
#if defined(CONFIG_ZYNQ_SDHCI)
# define CONFIG_MMC
# define CONFIG_GENERIC_MMC
# define CONFIG_SUPPORT_EMMC_BOOT
# define CONFIG_SDHCI
# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
# define CONFIG_ZYNQ_SDHCI_MAX_FREQ 200000000
@ -133,6 +150,7 @@
#endif
/* Initial environment variables */
#ifndef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"kernel_addr=0x80000\0" \
"fdt_addr=0x7000000\0" \
@ -143,8 +161,8 @@
"load mmc $sdbootdev:$partid $kernel_addr Image && " \
"booti $kernel_addr - $fdt_addr\0" \
DFU_ALT_INFO
#endif
#define CONFIG_PREBOOT "run bootargs"
#define CONFIG_BOOTCOMMAND "run $modeboot"
#define CONFIG_BOOTDELAY 3
@ -212,4 +230,41 @@
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_CLOCKS
#define CONFIG_SPL_TEXT_BASE 0xfffc0000
#define CONFIG_SPL_MAX_SIZE 0x20000
/* Just random location in OCM */
#define CONFIG_SPL_BSS_START_ADDR 0x1000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x2000000
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_OS_BOOT
/* u-boot is like dtb */
#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin"
#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000
/* ATF is my kernel image */
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf.ub"
/* FIT load address for RAM boot */
#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
/* MMC support */
#ifdef CONFIG_ZYNQ_SDHCI
# define CONFIG_SPL_MMC_SUPPORT
# define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */
# define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */
# define CONFIG_SPL_LIBDISK_SUPPORT
# define CONFIG_SPL_FAT_SUPPORT
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
#endif /* __XILINX_ZYNQMP_H */

6
include/configs/xilinx_zynqmp_zcu102.h
View File

@ -48,6 +48,12 @@
#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZCU102"
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_CMD_EEPROM
#define CONFIG_ZYNQ_EEPROM_BUS 5
#define CONFIG_ZYNQ_GEM_EEPROM_ADDR 0x54
#define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET 0x20
#define CONFIG_KERNEL_FDT_OFST_SIZE \
"kernel_offset=0x180000\0" \
"fdt_offset=0x100000\0" \

6
include/configs/zynq-common.h
View File

@ -315,11 +315,7 @@
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#ifdef CONFIG_OF_SEPARATE
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
#else
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
/* Disable dcache for SPL just for sure */

7
include/image.h
View File

@ -246,8 +246,10 @@ struct lmb;
#define IH_TYPE_RKSD 24 /* Rockchip SD card */
#define IH_TYPE_RKSPI 25 /* Rockchip SPI image */
#define IH_TYPE_ZYNQIMAGE 26 /* Xilinx Zynq Boot Image */
#define IH_TYPE_ZYNQMPIMAGE 27 /* Xilinx ZynqMP Boot Image */
#define IH_TYPE_FPGA 28 /* FPGA Image */
#define IH_TYPE_COUNT 27 /* Number of image types */
#define IH_TYPE_COUNT 29 /* Number of image types */
/*
* Compression Types
@ -494,6 +496,8 @@ int genimg_get_format(const void *img_addr);
int genimg_has_config(bootm_headers_t *images);
ulong genimg_get_image(ulong img_addr);
int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, const ulong *ld_start, ulong * const ld_len);
int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, ulong *rd_start, ulong *rd_end);
@ -809,6 +813,7 @@ int bootz_setup(ulong image, ulong *start, ulong *end);
#define FIT_LOADABLE_PROP "loadables"
#define FIT_DEFAULT_PROP "default"
#define FIT_SETUP_PROP "setup"
#define FIT_FPGA_PROP "fpga"
#define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE

1
include/spl.h
View File

@ -58,6 +58,7 @@ u32 spl_boot_mode(void);
void spl_set_header_raw_uboot(void);
int spl_parse_image_header(const struct image_header *header);
void spl_board_prepare_for_linux(void);
void spl_board_prepare_for_boot(void);
void __noreturn jump_to_image_linux(void *arg);
int spl_start_uboot(void);
void spl_display_print(void);

7
scripts/Makefile.spl
View File

@ -129,7 +129,12 @@ endif
boot.bin: $(obj)/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
else
ifdef CONFIG_ARCH_ZYNQ
MKIMAGEFLAGS_boot.bin = -T zynqimage
endif
ifdef CONFIG_ARCH_ZYNQMP
MKIMAGEFLAGS_boot.bin = -T zynqmpimage
endif
spl/boot.bin: $(obj)/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
@ -157,6 +162,8 @@ ifdef CONFIG_ARCH_ZYNQ
ALL-y += $(obj)/boot.bin
endif
ALL-(CONFIG_ARCH_ZYNQMP) += $(obj)/boot.bin
all: $(ALL-y)
quiet_cmd_cat = CAT $@

1
tools/Makefile
View File

@ -98,6 +98,7 @@ dumpimage-mkimage-objs := aisimage.o \
common/hash.o \
ublimage.o \
zynqimage.o \
zynqmpimage.o \
$(LIBFDT_OBJS) \
$(RSA_OBJS-y)

269
tools/zynqmpimage.c Normal file
View File

@ -0,0 +1,269 @@
/*
* Copyright (C) 2016 Michal Simek <michals@xilinx.com>
* Copyright (C) 2015 Nathan Rossi <nathan@nathanrossi.com>
*
* SPDX-License-Identifier: GPL-2.0+
*
* The following Boot Header format/structures and values are defined in the
* following documents:
* * ug1085 ZynqMP TRM (Chapter 9, Table 9-3)
*
* Expected Header Size = 0x9C0
* Forced as 'little' endian, 32-bit words
*
* 0x 0 - Interrupt table (8 words)
* ... (Default value = 0xeafffffe)
* 0x 1f
* 0x 20 - Width detection
* * DEFAULT_WIDTHDETECTION 0xaa995566
* 0x 24 - Image identifier
* * DEFAULT_IMAGEIDENTIFIER 0x584c4e58
* 0x 28 - Encryption
* * 0x00000000 - None
* * 0xa5c3c5a3 - eFuse
* * 0xa5c3c5a7 - obfuscated key in eFUSE
* * 0x3a5c3c5a - bbRam
* * 0xa35c7ca5 - obfuscated key in boot header
* 0x 2C - Image load
* 0x 30 - Image offset
* 0x 34 - PFW image length
* 0x 38 - Total PFW image length
* 0x 3C - Image length
* 0x 40 - Total image length
* 0x 44 - Image attributes
* 0x 48 - Header checksum
* 0x 4c - Obfuscated key
* ...
* 0x 68
* 0x 6c - Reserved
* 0x 70 - User defined
* ...
* 0x 9c
* 0x a0 - Secure header initialization vector
* ...
* 0x a8
* 0x ac - Obfuscated key initialization vector
* ...
* 0x b4
* 0x b8 - Register Initialization, 511 Address and Data word pairs
* * List is terminated with an address of 0xffffffff or
* ... * at the max number of entries
* 0x8b4
* 0x8b8 - Reserved
* ...
* 0x9bf
* 0x9c0 - Data/Image starts here or above
*/
#include "imagetool.h"
#include "mkimage.h"
#include <image.h>
#define HEADER_INTERRUPT_DEFAULT (cpu_to_le32(0xeafffffe))
#define HEADER_REGINIT_NULL (cpu_to_le32(0xffffffff))
#define HEADER_WIDTHDETECTION (cpu_to_le32(0xaa995566))
#define HEADER_IMAGEIDENTIFIER (cpu_to_le32(0x584c4e58))
enum {
ENCRYPTION_EFUSE = 0xa5c3c5a3,
ENCRYPTION_OEFUSE = 0xa5c3c5a7,
ENCRYPTION_BBRAM = 0x3a5c3c5a,
ENCRYPTION_OBBRAM = 0xa35c7ca5,
ENCRYPTION_NONE = 0x0,
};
struct zynqmp_reginit {
uint32_t address;
uint32_t data;
};
#define HEADER_INTERRUPT_VECTORS 8
#define HEADER_REGINITS 256
struct zynqmp_header {
uint32_t interrupt_vectors[HEADER_INTERRUPT_VECTORS]; /* 0x0 */
uint32_t width_detection; /* 0x20 */
uint32_t image_identifier; /* 0x24 */
uint32_t encryption; /* 0x28 */
uint32_t image_load; /* 0x2c */
uint32_t image_offset; /* 0x30 */
uint32_t pfw_image_length; /* 0x34 */
uint32_t total_pfw_image_length; /* 0x38 */
uint32_t image_size; /* 0x3c */
uint32_t image_stored_size; /* 0x40 */
uint32_t image_attributes; /* 0x44 */
uint32_t checksum; /* 0x48 */
uint32_t __reserved1[27]; /* 0x4c */
struct zynqmp_reginit register_init[HEADER_REGINITS]; /* 0xb8 */
uint32_t __reserved4[66]; /* 0x9c0 */
};
static struct zynqmp_header zynqmpimage_header;
static uint32_t zynqmpimage_checksum(struct zynqmp_header *ptr)
{
uint32_t checksum = 0;
if (ptr == NULL)
return 0;
checksum += le32_to_cpu(ptr->width_detection);
checksum += le32_to_cpu(ptr->image_identifier);
checksum += le32_to_cpu(ptr->encryption);
checksum += le32_to_cpu(ptr->image_load);
checksum += le32_to_cpu(ptr->image_offset);
checksum += le32_to_cpu(ptr->pfw_image_length);
checksum += le32_to_cpu(ptr->total_pfw_image_length);
checksum += le32_to_cpu(ptr->image_size);
checksum += le32_to_cpu(ptr->image_stored_size);
checksum += le32_to_cpu(ptr->image_attributes);
checksum = ~checksum;
return cpu_to_le32(checksum);
}
static void zynqmpimage_default_header(struct zynqmp_header *ptr)
{
int i;
if (ptr == NULL)
return;
ptr->width_detection = HEADER_WIDTHDETECTION;
ptr->image_attributes = 0x800;
ptr->image_identifier = HEADER_IMAGEIDENTIFIER;
ptr->encryption = cpu_to_le32(ENCRYPTION_NONE);
/* Setup not-supported/constant/reserved fields */
for (i = 0; i < HEADER_INTERRUPT_VECTORS; i++)
ptr->interrupt_vectors[i] = HEADER_INTERRUPT_DEFAULT;
for (i = 0; i < HEADER_REGINITS; i++) {
ptr->register_init[i].address = HEADER_REGINIT_NULL;
ptr->register_init[i].data = 0;
}
/*
* Certain reserved fields are required to be set to 0, ensure they are
* set as such.
*/
ptr->pfw_image_length = 0x0;
ptr->total_pfw_image_length = 0x0;
}
/* mkimage glue functions */
static int zynqmpimage_verify_header(unsigned char *ptr, int image_size,
struct image_tool_params *params)
{
struct zynqmp_header *zynqhdr = (struct zynqmp_header *)ptr;
if (image_size < sizeof(struct zynqmp_header))
return -1;
if (zynqhdr->width_detection != HEADER_WIDTHDETECTION)
return -1;
if (zynqhdr->image_identifier != HEADER_IMAGEIDENTIFIER)
return -1;
if (zynqmpimage_checksum(zynqhdr) != zynqhdr->checksum)
return -1;
return 0;
}
static void zynqmpimage_print_header(const void *ptr)
{
struct zynqmp_header *zynqhdr = (struct zynqmp_header *)ptr;
int i;
printf("Image Type : Xilinx Zynq Boot Image support\n");
printf("Image Offset : 0x%08x\n", le32_to_cpu(zynqhdr->image_offset));
printf("Image Size : %lu bytes (%lu bytes packed)\n",
(unsigned long)le32_to_cpu(zynqhdr->image_size),
(unsigned long)le32_to_cpu(zynqhdr->image_stored_size));
printf("Image Load : 0x%08x\n", le32_to_cpu(zynqhdr->image_load));
printf("Checksum : 0x%08x\n", le32_to_cpu(zynqhdr->checksum));
for (i = 0; i < HEADER_INTERRUPT_VECTORS; i++) {
if (zynqhdr->interrupt_vectors[i] == HEADER_INTERRUPT_DEFAULT)
continue;
printf("Modified Interrupt Vector Address [%d]: 0x%08x\n", i,
le32_to_cpu(zynqhdr->interrupt_vectors[i]));
}
for (i = 0; i < HEADER_REGINITS; i++) {
if (zynqhdr->register_init[i].address == HEADER_REGINIT_NULL)
break;
if (i == 0)
printf("Custom Register Initialization:\n");
printf(" @ 0x%08x -> 0x%08x\n",
le32_to_cpu(zynqhdr->register_init[i].address),
le32_to_cpu(zynqhdr->register_init[i].data));
}
}
static int zynqmpimage_check_params(struct image_tool_params *params)
{
if (!params)
return 0;
if (params->addr != 0x0) {
fprintf(stderr, "Error: Load Address cannot be specified.\n");
return -1;
}
/*
* If the entry point is specified ensure it is 64 byte aligned.
*/
if (params->eflag && (params->ep % 64 != 0)) {
fprintf(stderr,
"Error: Entry Point must be aligned to a 64-byte boundary.\n");
return -1;
}
return !(params->lflag || params->dflag);
}
static int zynqmpimage_check_image_types(uint8_t type)
{
if (type == IH_TYPE_ZYNQMPIMAGE)
return EXIT_SUCCESS;
return EXIT_FAILURE;
}
static void zynqmpimage_set_header(void *ptr, struct stat *sbuf, int ifd,
struct image_tool_params *params)
{
struct zynqmp_header *zynqhdr = (struct zynqmp_header *)ptr;
zynqmpimage_default_header(zynqhdr);
/* place image directly after header */
zynqhdr->image_offset =
cpu_to_le32((uint32_t)sizeof(struct zynqmp_header));
zynqhdr->image_size = cpu_to_le32(params->file_size -
sizeof(struct zynqmp_header));
zynqhdr->image_stored_size = zynqhdr->image_size;
zynqhdr->image_load = 0xfffc0000;
if (params->eflag)
zynqhdr->image_load = cpu_to_le32((uint32_t)params->ep);
zynqhdr->checksum = zynqmpimage_checksum(zynqhdr);
}
U_BOOT_IMAGE_TYPE(
zynqmpimage,
"Xilinx ZynqMP Boot Image support",
sizeof(struct zynqmp_header),
(void *)&zynqmpimage_header,
zynqmpimage_check_params,
zynqmpimage_verify_header,
zynqmpimage_print_header,
zynqmpimage_set_header,
NULL,
zynqmpimage_check_image_types,
NULL,
NULL
);