Coding style cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
This commit is contained in:
Wolfgang Denk
parent
5fc56b907d
commit
f15c6515fc
|
|
@ -124,4 +124,3 @@ void enable_vbus(void)
|
|||
i2c_write(IOEXP_I2C_ADDR, 0, 0, &data, 1);
|
||||
}
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -45,4 +45,3 @@ distclean: clean
|
|||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
|
|
|
|||
|
|
@ -45,4 +45,3 @@ distclean: clean
|
|||
include $(SRCTREE)/rules.mk
|
||||
|
||||
sinclude $(obj).depend
|
||||
|
||||
|
|
|
|||
|
|
@ -238,4 +238,3 @@ static void cache_flush(void)
|
|||
{
|
||||
asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (0));
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -51,7 +51,6 @@ leaving preprocessor symbol "CONFIG_KORAT_PERMANENT" undefined.
|
|||
2008-02-22, Larry Johnson <lrj@acm.org>
|
||||
|
||||
|
||||
|
||||
The CompactFlash(R) controller on the Korat board provides a hi-speed USB
|
||||
interface. This may be connected to either a dedicated port on the on-board
|
||||
USB controller, or to a USB port on the PowerPC 440EPx processor. The U-Boot
|
||||
|
|
|
|||
|
|
@ -97,70 +97,70 @@ Implementing AMP(Asymmetric MultiProcessing)
|
|||
-------------
|
||||
1. Build kernel image for core0:
|
||||
|
||||
a. $ make 85xx/mpc8572_ds_defconfig
|
||||
a. $ make 85xx/mpc8572_ds_defconfig
|
||||
|
||||
b. $ make menuconfig
|
||||
- un-select "Processor support"->"Symetric multi-processing support"
|
||||
b. $ make menuconfig
|
||||
- un-select "Processor support"->"Symetric multi-processing support"
|
||||
|
||||
c. $ make uImage
|
||||
c. $ make uImage
|
||||
|
||||
d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core0
|
||||
|
||||
2. Build kernel image for core1:
|
||||
|
||||
a. $ make 85xx/mpc8572_ds_defconfig
|
||||
a. $ make 85xx/mpc8572_ds_defconfig
|
||||
|
||||
b. $ make menuconfig
|
||||
- Un-select "Processor support"->"Symetric multi-processing support"
|
||||
- Select "Advanced setup" -> " Prompt for advanced kernel
|
||||
configuration options"
|
||||
- Select "Set physical address where the kernel is loaded" and
|
||||
set it to 0x20000000, asssuming core1 will start from 512MB.
|
||||
- Select "Set custom page offset address"
|
||||
- Select "Set custom kernel base address"
|
||||
- Select "Set maximum low memory"
|
||||
- "Exit" and save the selection.
|
||||
b. $ make menuconfig
|
||||
- Un-select "Processor support"->"Symetric multi-processing support"
|
||||
- Select "Advanced setup" -> " Prompt for advanced kernel
|
||||
configuration options"
|
||||
- Select "Set physical address where the kernel is loaded" and
|
||||
set it to 0x20000000, asssuming core1 will start from 512MB.
|
||||
- Select "Set custom page offset address"
|
||||
- Select "Set custom kernel base address"
|
||||
- Select "Set maximum low memory"
|
||||
- "Exit" and save the selection.
|
||||
|
||||
c. $ make uImage
|
||||
c. $ make uImage
|
||||
|
||||
d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1
|
||||
|
||||
3. Create dtb for core0:
|
||||
|
||||
$ dtc -I dts -O dtb -f -b 0 arch/powerpc/boot/dts/mpc8572ds_core0.dts > /tftpboot/mpc8572ds_core0.dtb
|
||||
$ dtc -I dts -O dtb -f -b 0 arch/powerpc/boot/dts/mpc8572ds_core0.dts > /tftpboot/mpc8572ds_core0.dtb
|
||||
|
||||
4. Create dtb for core1:
|
||||
|
||||
$ dtc -I dts -O dtb -f -b 1 arch/powerpc/boot/dts/mpc8572ds_core1.dts > /tftpboot/mpc8572ds_core1.dtb
|
||||
$ dtc -I dts -O dtb -f -b 1 arch/powerpc/boot/dts/mpc8572ds_core1.dts > /tftpboot/mpc8572ds_core1.dtb
|
||||
|
||||
5. Bring up two cores separately:
|
||||
|
||||
a. Power on the board, under u-boot prompt:
|
||||
=> setenv <serverip>
|
||||
=> setenv <ipaddr>
|
||||
=> setenv bootargs root=/dev/ram rw console=ttyS0,115200
|
||||
b. Bring up core1's kernel first:
|
||||
=> setenv bootm_low 0x20000000
|
||||
=> setenv bootm_size 0x10000000
|
||||
=> tftp 21000000 8572/uImage.core1
|
||||
=> tftp 22000000 8572/ramdiskfile
|
||||
=> tftp 20c00000 8572/mpc8572ds_core1.dtb
|
||||
=> interrupts off
|
||||
=> bootm start 21000000 22000000 20c00000
|
||||
=> bootm loados
|
||||
=> bootm ramdisk
|
||||
=> bootm fdt
|
||||
=> fdt boardsetup
|
||||
=> fdt chosen $initrd_start $initrd_end
|
||||
=> bootm prep
|
||||
=> cpu 1 release $bootm_low - $fdtaddr -
|
||||
c. Bring up core0's kernel(on the same u-boot console):
|
||||
=> setenv bootm_low 0
|
||||
=> setenv bootm_size 0x20000000
|
||||
=> tftp 1000000 8572/uImage.core0
|
||||
=> tftp 2000000 8572/ramdiskfile
|
||||
=> tftp c00000 8572/mpc8572ds_core0.dtb
|
||||
=> bootm 1000000 2000000 c00000
|
||||
a. Power on the board, under u-boot prompt:
|
||||
=> setenv <serverip>
|
||||
=> setenv <ipaddr>
|
||||
=> setenv bootargs root=/dev/ram rw console=ttyS0,115200
|
||||
b. Bring up core1's kernel first:
|
||||
=> setenv bootm_low 0x20000000
|
||||
=> setenv bootm_size 0x10000000
|
||||
=> tftp 21000000 8572/uImage.core1
|
||||
=> tftp 22000000 8572/ramdiskfile
|
||||
=> tftp 20c00000 8572/mpc8572ds_core1.dtb
|
||||
=> interrupts off
|
||||
=> bootm start 21000000 22000000 20c00000
|
||||
=> bootm loados
|
||||
=> bootm ramdisk
|
||||
=> bootm fdt
|
||||
=> fdt boardsetup
|
||||
=> fdt chosen $initrd_start $initrd_end
|
||||
=> bootm prep
|
||||
=> cpu 1 release $bootm_low - $fdtaddr -
|
||||
c. Bring up core0's kernel(on the same u-boot console):
|
||||
=> setenv bootm_low 0
|
||||
=> setenv bootm_size 0x20000000
|
||||
=> tftp 1000000 8572/uImage.core0
|
||||
=> tftp 2000000 8572/ramdiskfile
|
||||
=> tftp c00000 8572/mpc8572ds_core0.dtb
|
||||
=> bootm 1000000 2000000 c00000
|
||||
|
||||
Please note only core0 will run u-boot, core1 starts kernel directly after
|
||||
"cpu release" command is issued.
|
||||
|
|
|
|||
|
|
@ -84,4 +84,3 @@ extern int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len);
|
|||
extern int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len);
|
||||
extern void enable_vbus(void);
|
||||
#endif /* __DAVINCI_USB_H__ */
|
||||
|
||||
|
|
|
|||
|
|
@ -314,4 +314,3 @@ extern inline u16 musb_readw(u32 offset);
|
|||
extern inline u8 musb_readb(u32 offset);
|
||||
|
||||
#endif /* __MUSB_HDRC_DEFS_H__ */
|
||||
|
||||
|
|
|
|||
|
|
@ -818,8 +818,10 @@ int usb_lowlevel_init(void)
|
|||
|
||||
/* Start the host controller. */
|
||||
cmd = ehci_readl(&hcor->or_usbcmd);
|
||||
/* Philips, Intel, and maybe others need CMD_RUN before the
|
||||
* root hub will detect new devices (why?); NEC doesn't */
|
||||
/*
|
||||
* Philips, Intel, and maybe others need CMD_RUN before the
|
||||
* root hub will detect new devices (why?); NEC doesn't
|
||||
*/
|
||||
cmd &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
|
||||
cmd |= CMD_RUN;
|
||||
ehci_writel(&hcor->or_usbcmd, cmd);
|
||||
|
|
|
|||
|
|
@ -81,4 +81,3 @@
|
|||
#endif
|
||||
|
||||
#endif /* __ASM_ARCH_OMAP_GPMC_H */
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue