From f4ef66685a6cdca6e5b3a8b2f199789f5d94320a Mon Sep 17 00:00:00 2001 From: Tom Warren Date: Thu, 14 Apr 2011 12:09:41 +0000 Subject: [PATCH] arm: Tegra2: Move clk/mux init to board_early_init_f, add GPIO init Signed-off-by: Tom Warren --- board/nvidia/common/board.c | 32 +++++++++++++------- board/nvidia/common/board.h | 4 +++ board/nvidia/harmony/Makefile | 1 + board/nvidia/harmony/harmony.c | 34 +++++++++++++++++++++ board/nvidia/seaboard/Makefile | 1 + board/nvidia/seaboard/seaboard.c | 52 ++++++++++++++++++++++++++++++++ 6 files changed, 113 insertions(+), 11 deletions(-) create mode 100644 board/nvidia/harmony/harmony.c create mode 100644 board/nvidia/seaboard/seaboard.c diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 5edd70fa7c..3d6c248479 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -41,7 +41,16 @@ const struct tegra2_sysinfo sysinfo = { #ifdef CONFIG_BOARD_EARLY_INIT_F int board_early_init_f(void) { - debug("Board Early Init\n"); + /* Initialize periph clocks */ + clock_init(); + + /* Initialize periph pinmuxes */ + pinmux_init(); + + /* Initialize periph GPIOs */ + gpio_init(); + + /* Init UART, scratch regs, and start CPU */ tegra2_start(); return 0; } @@ -64,10 +73,10 @@ int timer_init(void) static void clock_init_uart(void) { struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - static int pllp_init_done; u32 reg; - if (!pllp_init_done) { + reg = readl(&clkrst->crc_pllp_base); + if (!(reg & PLL_BASE_OVRRIDE)) { /* Override pllp setup for 216MHz operation. */ reg = (PLL_BYPASS | PLL_BASE_OVRRIDE | PLL_DIVP); reg |= (((NVRM_PLLP_FIXED_FREQ_KHZ/500) << 8) | PLL_DIVM); @@ -78,8 +87,6 @@ static void clock_init_uart(void) reg &= ~PLL_BYPASS; writel(reg, &clkrst->crc_pllp_base); - - pllp_init_done++; } /* Now do the UART reset/clock enable */ @@ -181,6 +188,15 @@ void pinmux_init(void) pin_mux_uart(); } +/* + * Routine: gpio_init + * Description: Do individual peripheral GPIO configs + */ +void gpio_init(void) +{ + gpio_config_uart(); +} + /* * Routine: board_init * Description: Early hardware init. @@ -192,11 +208,5 @@ int board_init(void) /* board id for Linux */ gd->bd->bi_arch_number = CONFIG_MACH_TYPE; - /* Initialize peripheral clocks */ - clock_init(); - - /* Initialize periph pinmuxes */ - pinmux_init(); - return 0; } diff --git a/board/nvidia/common/board.h b/board/nvidia/common/board.h index 47c7885e5a..350bc5750e 100644 --- a/board/nvidia/common/board.h +++ b/board/nvidia/common/board.h @@ -25,5 +25,9 @@ #define _BOARD_H_ void tegra2_start(void); +void clock_init(void); +void pinmux_init(void); +void gpio_init(void); +void gpio_config_uart(void); #endif /* BOARD_H */ diff --git a/board/nvidia/harmony/Makefile b/board/nvidia/harmony/Makefile index 3a146cb9ca..9fb6b575a8 100644 --- a/board/nvidia/harmony/Makefile +++ b/board/nvidia/harmony/Makefile @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o +COBJS := $(BOARD).o COBJS += ../common/board.o SRCS := $(COBJS:.o=.c) diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c new file mode 100644 index 0000000000..f1ab050899 --- /dev/null +++ b/board/nvidia/harmony/harmony.c @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/* + * Routine: gpio_config_uart + * Description: Does nothing on Harmony - no conflict w/SPI. + */ +void gpio_config_uart(void) +{ +} diff --git a/board/nvidia/seaboard/Makefile b/board/nvidia/seaboard/Makefile index 3a146cb9ca..9fb6b575a8 100644 --- a/board/nvidia/seaboard/Makefile +++ b/board/nvidia/seaboard/Makefile @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o +COBJS := $(BOARD).o COBJS += ../common/board.o SRCS := $(COBJS:.o=.c) diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c new file mode 100644 index 0000000000..4b9a8f33e8 --- /dev/null +++ b/board/nvidia/seaboard/seaboard.c @@ -0,0 +1,52 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +/* + * Routine: gpio_config_uart + * Description: Force GPIO_PI3 low on Seaboard so UART4 works. + */ +void gpio_config_uart(void) +{ + int gp = GPIO_PI3; + struct gpio_ctlr *gpio = (struct gpio_ctlr *)NV_PA_GPIO_BASE; + struct gpio_ctlr_bank *bank = &gpio->gpio_bank[GPIO_BANK(gp)]; + u32 val; + + /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */ + val = readl(&bank->gpio_config[GPIO_PORT(gp)]); + val |= 1 << GPIO_BIT(gp); + writel(val, &bank->gpio_config[GPIO_PORT(gp)]); + + val = readl(&bank->gpio_out[GPIO_PORT(gp)]); + val &= ~(1 << GPIO_BIT(gp)); + writel(val, &bank->gpio_out[GPIO_PORT(gp)]); + + val = readl(&bank->gpio_dir_out[GPIO_PORT(gp)]); + val |= 1 << GPIO_BIT(gp); + writel(val, &bank->gpio_dir_out[GPIO_PORT(gp)]); +}