Convert ISO-8859 files to UTF-8

There was a mix of UTF-8 and ISO-8859 files in the U-Boot source
tree, which could cause issues with the patchwork review system.
This commit converts all ISO-8859 files to UTF-8.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
This commit is contained in:
Albert ARIBAUD 2011-08-04 18:45:45 +02:00 committed by Wolfgang Denk
parent eccfb49046
commit fa82f871c8
100 changed files with 184 additions and 184 deletions

View File

@ -74,7 +74,7 @@ Joe D'Abbraccio <ljd015@freescale.com>
MPC837xERDB MPC837x
Kári Davíðsson <kd@flaga.is>
Kári Davíðsson <kd@flaga.is>
FLAGADM MPC823
@ -601,7 +601,7 @@ Rishi Bhattacharya <rishi@ti.com>
omap5912osk ARM926EJS
Andreas Bießmann <andreas.devel@gmail.com>
Andreas Bießmann <andreas.devel@gmail.com>
at91rm9200ek at91rm9200
grasshopper avr32
@ -664,7 +664,7 @@ Simon Guinot <simon.guinot@sequanux.org>
netspace_v2 ARM926EJS (Kirkwood SoC)
netspace_max_v2 ARM926EJS (Kirkwood SoC)
Marius Gröger <mag@sysgo.de>
Marius Gröger <mag@sysgo.de>
impa7 ARM720T (EP7211)
ep7312 ARM720T (EP7312)
@ -752,7 +752,7 @@ Nishanth Menon <nm@ti.com>
omap3_sdp3430 ARM ARMV7 (OMAP3xx SoC)
omap3_zoom1 ARM ARMV7 (OMAP3xx SoC)
David Müller <d.mueller@elsoft.ch>
David Müller <d.mueller@elsoft.ch>
smdk2410 ARM920T
VCMA9 ARM920T
@ -910,7 +910,7 @@ Richard Woodruff <r-woodruff2@ti.com>
omap2420h4 ARM1136EJS
Alex Züpke <azu@sysgo.de>
Alex Züpke <azu@sysgo.de>
lart SA1100
dnp1110 SA1110

View File

@ -3,8 +3,8 @@
*
* Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com>
*
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>

View File

@ -1,8 +1,8 @@
/*
* armboot - Startup Code for ARM720 CPU-core
*
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,8 +1,8 @@
/*
* armboot - Startup Code for ARM920 CPU-core
*
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
*
* See file CREDITS for list of people who contributed to this

View File

@ -5,8 +5,8 @@
*
* ----- Adapted for OMAP1510 from ARM920 code ------
*
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>

View File

@ -5,8 +5,8 @@
*
* ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
*
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>

View File

@ -5,8 +5,8 @@
*
* ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
*
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>

View File

@ -5,8 +5,8 @@
*
* ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
*
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>

View File

@ -5,8 +5,8 @@
*
* ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
*
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>

View File

@ -5,8 +5,8 @@
*
* ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
*
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>

View File

@ -975,7 +975,7 @@ typedef struct
* @li 1 - Generate HEC.
* @li 0 - Disable HEC generation.
*/
unsigned int txCOSET:1; /**< [24] If enabled the HEC is Exclusive-ORÆed with the value 0x55 before
unsigned int txCOSET:1; /**< [24] If enabled the HEC is Exclusive-OR'ed with the value 0x55 before
* being presented on the Utopia bus.
* @li 1 - Enable HEC ExOR with value 0x55
* @li 0 - Use generated HEC value.
@ -1302,7 +1302,7 @@ typedef struct
@li 1 - HEC checking enabled
@li 0 - HEC checking disabled */
unsigned int rxCOSET:1; /**< [25] If enabled the HEC is Exclusive-ORÆed with the value 0x55
unsigned int rxCOSET:1; /**< [25] If enabled the HEC is Exclusive-OR'ed with the value 0x55
before being tested with the received HEC.
@li 1 - Enable HEC ExOR with value 0x55.
@li 0 - Use generated HEC value.*/
@ -1320,9 +1320,9 @@ typedef struct
unsigned int rxHashEnbGFC:1; /**< [15] Specifies if the VPI field [11:8]/GFC field should be
included in the Hash data input or if the bits should be padded
with 1Æb0.
with 1'b0.
@li 1 - VPI [11:8]/GFC field valid and used in Hash residue calculation.
@li 0 - VPI [11:8]/GFC field padded with 1Æb0 */
@li 0 - VPI [11:8]/GFC field padded with 1'b0 */
unsigned int rxPreHash:1; /**< [14] Enable Pre-hash value generation. Specifies if the
incoming cell data should be pre-hashed to allow VPI/VCI header look-up
@ -1489,10 +1489,10 @@ typedef struct
unsigned int invalidSizeOvrInt:1; /**< [9] Enable CBI Receive Status Condition if the InvalidSizeCount
register overflows.
@li 1 - CBI Receive Status Condition asserted.
@li¸0 - No CBI Receive Status asserted */
@li 0 - No CBI Receive Status asserted */
unsigned int rxIdleOvrInt:1; /**< [8] Enable CBI Receive Status Condition if the RxIdleCount overflows.
@li 1 - CBI Receive Condition asserted.
@li 1 - CBI Receive Condition asserted.
@li 0 - No CBI Receive Condition asserted */
unsigned int reserved_2:3; /**< [7:5] These bits are always 0 */
@ -1679,7 +1679,7 @@ typedef struct
unsigned int txReset:1; /**< [25] Resets the Utopia Coprocessor transmit module to a known state.
* @li Note: All transmit configuration and status registers will be reset
* to their reset values.
* @li 0 - Normal operating mode¸
* @li 0 - Normal operating mode
* @li 1 - Reset transmit modules
*/

View File

@ -250,7 +250,7 @@ PUBLIC void ixOsalIrqUnlock (UINT32 irqEnable);
*
* @brief Selectively disables interrupts
*
* @param irqLevel ­ new interrupt level
* @param irqLevel - new interrupt level
*
* Disables the interrupts below the specified interrupt level
*
@ -269,7 +269,7 @@ PUBLIC UINT32 ixOsalIrqLevelSet (UINT32 irqLevel);
*
* @brief Enables an interrupt level
*
* @param irqLevel ­ interrupt level to enable
* @param irqLevel - interrupt level to enable
*
* Enables the specified interrupt level
*
@ -285,7 +285,7 @@ PUBLIC void ixOsalIrqEnable (UINT32 irqLevel);
*
* @brief Disables an interrupt level
*
* @param irqLevel ­ interrupt level to disable
* @param irqLevel - interrupt level to disable
*
* Disables the specified interrupt level
*

View File

@ -1,8 +1,8 @@
/*
* armboot - Startup Code for ARM920 CPU-core
*
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
*
* See file CREDITS for list of people who contributed to this

View File

@ -4,7 +4,7 @@
* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
* Copyright (C) 2000 Wolfgang Denk <wd@denx.de>
* Copyright (c) 2001 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2001 Alex Züpke <azu@sysgo.de>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2003
* David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
* David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2003
* David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
* David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2003
* David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
* David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -182,7 +182,7 @@ void cpu_init_f (volatile immap_t * immr)
#endif
/* now restrict to preliminary range */
/* the PS came from the HRCW, don´t change it */
/* the PS came from the HRCW, don't change it */
memctl->memc_br0 = SET_VAL_MASK(memctl->memc_br0 , CONFIG_SYS_BR0_PRELIM, BRx_PS_MSK);
memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;

View File

@ -20,7 +20,7 @@
*
* Adapted for U-Boot:
* (C) Copyright 2001 Denis Peter, MPL AG Switzerland
* (C) Copyright 2008, Daniel Hellström, daniel@gaisler.com
* (C) Copyright 2008, Daniel Hellström, daniel@gaisler.com
* Added AMBA Plug&Play detection of GRUSB, modified interrupt handler.
* Added cache flushes where needed.
*

View File

@ -3,7 +3,7 @@
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2002
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
#
# See file CREDITS for list of people who contributed to this
# project.

View File

@ -1,6 +1,6 @@
#
# (C) Copyright 2002
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
#
# See file CREDITS for list of people who contributed to this
# project.

View File

@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>

View File

@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* Portions of this file are derived from the Linux kernel source
* Copyright (C) 1991, 1992 Linus Torvalds
@ -246,7 +246,7 @@ void irq_llsr(struct irq_regs *regs)
{
/*
* For detailed description of each exception, refer to:
* Intel® 64 and IA-32 Architectures Software Developer's Manual
* Intel® 64 and IA-32 Architectures Software Developer's Manual
* Volume 1: Basic Architecture
* Order Number: 253665-029US, November 2008
* Table 6-1. Exceptions and Interrupts

View File

@ -2,7 +2,7 @@
* U-boot - x86 Startup Code
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -6,7 +6,7 @@
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2002
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
#
# See file CREDITS for list of people who contributed to this
# project.

View File

@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -5,7 +5,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -5,7 +5,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002,2003
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -3,7 +3,7 @@
* Graeme Russ, graeme.russ@gmail.com
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -2,7 +2,7 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, <wd@denx.de>

View File

@ -12,7 +12,7 @@
* Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* (C) Copyright 2001
* Josh Huber, Mission Critical Linux, Inc, <huber@mclx.com>
@ -43,7 +43,7 @@
* Daniel Hellstrom, Detlev Zundel, Wolfgang Denk and Josh Huber are
* credited for the corresponding work on those ports. The original
* interrupt handling routines for the x86 port were written by
* Daniel Engström
* Daniel Engström
*/
#include <common.h>

View File

@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
* Daniel Engström, Omicron Ceti AB, daniel@omicron.se
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -386,7 +386,7 @@ TCP: Hash tables configured (established 1024 bind 1024)
IP-Config: Incomplete network configuration information.
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 44k iné
Freeing unused kernel memory: 44k init
init started: BusyBox v0.60.2 (2002.07.01-12:06+0000) multi-call Configuring hostname
Configuring lo...
Configuring eth0...

View File

@ -35,7 +35,7 @@
/*******************************************************************************
* memoryGetBankBaseAddress - Returns the base address of a memory bank.
* DESCRIPTION:
* This function returns the base address of one of the SDRAMs memory
* This function returns the base address of one of the SDRAM's memory
* banks. There are 4 memory banks and each one represents one DIMM side.
* INPUT:
* MEMORY_BANK bank - Selects one of the four banks as defined in Memory.h.
@ -366,8 +366,8 @@ unsigned int memoryGetDeviceWidth (DEVICE device)
* This function sets new base and size for one the memory banks
* (CS0 - CS3). It is the programmer`s responsibility to make sure that
* there are no conflicts with other memory spaces. When two memory spaces
* overlap, the MVs behavior is not defined .If a bank needs to be closed,
* set the bankLength parameter size to 0x0.
* overlap, the MV's behavior is not defined .If a bank needs to be closed,
* set the 'bankLength' parameter size to 0x0.
*
* INPUT:
* bank - One of the memory banks (CS0-CS3) as defined in gtMemory.h.
@ -375,7 +375,7 @@ unsigned int memoryGetDeviceWidth (DEVICE device)
* bankLength - The memory bank size. This function will decrement the
* 'bankLength' parameter by one and then check if the size is
* valid. A valid size must be programed from LSB to MSB as
* sequence of 1s followed by sequence of 0s.
* sequence of '1's followed by sequence of '0's.
* To close a memory window simply set the size to 0.
* NOTE!!!
* The size must be in 64Kbyte granularity.
@ -487,7 +487,7 @@ bool memoryMapBank (MEMORY_BANK bank, unsigned int bankBase,
* This function sets new base and size for one the device windows
* (DEV_CS0 - DEV_CS3). It is the programmer`s responsibility to make sure
* that there are no conflicts with other memory spaces. When two memory
* spaces overlap, the MVs behavior is not defined .If a device window
* spaces overlap, the MV's behavior is not defined .If a device window
* needs to be closed, set the 'deviceLength' parameter size to 0x0.
*
* INPUT:
@ -497,8 +497,8 @@ bool memoryMapBank (MEMORY_BANK bank, unsigned int bankBase,
* deviceLength - The device window size. This function will decrement
* the 'deviceLength' parameter by one and then
* check if the size is valid. A valid size must be
* programed from LSB to MSB as sequence of 1s
* followed by sequence of 0s.
* programed from LSB to MSB as sequence of '1's
* followed by sequence of '0's.
* To close a memory window simply set the size to 0.
*
* NOTE!!!
@ -604,7 +604,7 @@ bool memoryMapDeviceSpace (DEVICE device, unsigned int deviceBase,
* This function sets new base and size for one the PCI windows
* (PCI memory0/1/2..). It is the programmer`s responsibility to make sure
* that there are no conflicts with other memory spaces. When two memory
* spaces overlap, the MVs behavior is not defined .If a PCI window
* spaces overlap, the MV's behavior is not defined. If a PCI window
* needs to be closed, set the 'pciWindowSize' parameter size to 0x0.
*
* INPUT:
@ -613,7 +613,7 @@ bool memoryMapDeviceSpace (DEVICE device, unsigned int deviceBase,
* pciWindowSize - The PCI window size. This function will decrement the
* 'pciWindowSize' parameter by one and then check if the
* size is valid. A valid size must be programed from LSB
* to MSB as sequence of 1s followed by sequence of 0s.
* to MSB as sequence of '1's followed by sequence of '0's.
* To close a memory window simply set the size to 0.
*
* NOTE!!!
@ -718,14 +718,14 @@ bool memorySetPciWindow (PCI_MEM_WINDOW pciWindow, unsigned int pciWindowBase,
* registers memory space.
*
* DESCRIPTION:
* This function set new base address for the internal registers memory
* This function set new base address for the internal registers memory
* space (the size is fixed and cannot be modified). The function does not
* handle overlapping with other memory spaces, it is the programer's
* responsibility to ensure that overlapping does not occur.
* When two memory spaces overlap, the MVs behavior is not defined.
* When two memory spaces overlap, the MV's behavior is not defined.
*
* INPUT:
* internalRegBase - new base address for the internal registers memory
* internalRegBase - new base address for the internal registers memory
* space.
*
* OUTPUT:
@ -762,7 +762,7 @@ bool memoryMapInternalRegistersSpace (unsigned int internalRegBase)
* address.
*
* DESCRIPTION:
* This function returns the base address of the internal registers
* This function returns the base address of the internal registers
* memory space .
*
* INPUT:
@ -772,7 +772,7 @@ bool memoryMapInternalRegistersSpace (unsigned int internalRegBase)
* None.
*
* RETURN:
* 32 bit base address of the internal registers memory space.
* 32 bit base address of the internal registers memory space.
*
*******************************************************************************/
unsigned int memoryGetInternalRegistersSpace (void)
@ -874,7 +874,7 @@ void gtMemorySetInternalSramBaseAddr (unsigned int sramBaseAddress)
* regionSize - The region's size. This function will decrement the
* 'regionSize' parameter by one and then check if the size
* is valid. A valid size must be programed from LSB to MSB
* as sequence of 1s followed by sequence of 0s.
* as sequence of '1's followed by sequence of '0's.
* To close a memory window simply set the size to 0.
*
* NOTE!!!

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2001
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
* U-Boot port on RPXClassic LF (CLLF_BW31) board
*

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2001
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
* U-Boot port on RPXClassic LF (CLLF_BW31) board
*

View File

@ -6,7 +6,7 @@
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2002
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
#
# See file CREDITS for list of people who contributed to this
# project.

View File

@ -3,7 +3,7 @@
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -378,7 +378,7 @@ initdram (int board_type)
*
* "At system reset, initialization software must set up the
* programmable parameters in the memory controller banks registers
* (ORx, BRx, P/LSDMR). After all memory parameters are conÞgured,
* (ORx, BRx, P/LSDMR). After all memory parameters are configured,
* system software should execute the following initialization sequence
* for each SDRAM device.
*

View File

@ -5,44 +5,44 @@ Die Implementierung / Decodierung beruht auf den Angaben aus dem Do-
kument "PIC LWE-Tastatur" in der Fassung vom 9. 3. 2001, insbesonde-
re Tabelle 3 im Kapitel 4.3 Tastencodes. In U-Boot werden die vom
Keyboard-Controller gelesenen Daten hexadezimal codiert in der auto-
matisch angelegten Environment-Variablen "keybd" übergeben. Ist kei-
ne Taste gedrückt worden, steht dort:
matisch angelegten Environment-Variablen "keybd" übergeben. Ist kei-
ne Taste gedrückt worden, steht dort:
keybd=000000000000000000
Der decodierte Tastencode ("keybd") kann mit den "bootargs" an den
Linux-Kernel übergeben und dort z. B. in einem Device-Treiber oder
Linux-Kernel übergeben und dort z. B. in einem Device-Treiber oder
einer Applikation ausgewertet werden.
Sonderfunktionen beim Booten:
Es lassen sich eine oder mehrere (beliebig viele) Tasten oder Tasten-
kombinationen definieren, die Sonderfunktionen auslösen, wenn diese
Tasten beim Booten (Reset) gedrückt sind.
kombinationen definieren, die Sonderfunktionen auslösen, wenn diese
Tasten beim Booten (Reset) gedrückt sind.
Wird eine eingestellte Taste bzw. Tastenkombination erkannt, so wird
in U-Boot noch vor dem Start des "Countdown" und somit vor jedem an-
deren Kommando der Inhalt einer dieser Taste bzw. Tastenkombination
zugeordneten Environment-Variablen ausführen.
zugeordneten Environment-Variablen ausführen.
Die Environment-Variable "magic_keys" wird als Liste von Zeichen ver-
standen, die als Suffix an den Namen "key_magic" angefügt werden und
standen, die als Suffix an den Namen "key_magic" angefügt werden und
so die Namen der Environment-Variablen definieren, mit denen die
Tasten (-kombinationen) festgelegt werden:
Ist "magic_keys" NICHT definiert, so wird nur die in der Environment-
Variablen "key_magic" codierte Tasten (-kombination) geprüft, und
ggf. der Inhalt der Environment-Variablen "key_cmd" ausgeführt (ge-
Variablen "key_magic" codierte Tasten (-kombination) geprüft, und
ggf. der Inhalt der Environment-Variablen "key_cmd" ausgeführt (ge-
nauer: der Inhalt von "key_cmd" wird der Variablen "preboot" zugewie-
sen, die ausgeführt wird, unmittelbar bevor die interaktive Kommando-
sen, die ausgeführt wird, unmittelbar bevor die interaktive Kommando-
interpretation beginnt).
Enthält "magic_keys" z. B. die Zeichenkette "0123CB*", so werden
nacheinander folgende Aktionen ausgeführt:
Enthält "magic_keys" z. B. die Zeichenkette "0123CB*", so werden
nacheinander folgende Aktionen ausgeführt:
prüfe Tastencode ggf. führe aus Kommando
prüfe Tastencode ggf. führe aus Kommando
in Variable in Variable
-----------------------------------
key_magic0 ==> key_cmd0
@ -55,43 +55,43 @@ nacheinander folgende Aktionen ausgef
key_magic* ==> key_cmd*
Hinweis: sobald ein aktivierter Tastencode erkannt wurde, wird die
Bearbeitung abgebrochen; es wird daher höchstens eines der definier-
ten Kommandos ausgeführt, wobei die Priorität durch die Suchreihen-
Bearbeitung abgebrochen; es wird daher höchstens eines der definier-
ten Kommandos ausgeführt, wobei die Priorität durch die Suchreihen-
folge festgelegt wird, also durch die Reihenfolge der Zeichen in der
Varuiablen "magic_keys".
Die Codierung der Tasten, die beim Booten gedrückt werden müssen, um
eine Funktion auszulösen, erfolgt nach der Tastaturtabelle.
Die Codierung der Tasten, die beim Booten gedrückt werden müssen, um
eine Funktion auszulösen, erfolgt nach der Tastaturtabelle.
Die Definitionen
=> setenv key_magic0 3a+3b
=> setenv key_cmd0 setenv bootdelay 30
bedeuten dementsprechend, daß die Tasten mit den Codes 0x3A (Taste
"F1") und 0x3B (Taste "F2") gleichzeitig gedrückt werden müssen. Sie
können dort eine beliebige Tastenkombination eintragen (jeweils 2
Zeichen für die Hex-Codes der Tasten, und '+' als Trennzeichen).
bedeuten dementsprechend, daß die Tasten mit den Codes 0x3A (Taste
"F1") und 0x3B (Taste "F2") gleichzeitig gedrückt werden müssen. Sie
können dort eine beliebige Tastenkombination eintragen (jeweils 2
Zeichen für die Hex-Codes der Tasten, und '+' als Trennzeichen).
Wird die eingestellte Tastenkombination erkannt, so wird in U-Boot
noch vor dem Start des "Countdown" und somit vor jedem anderen Kom-
mando das angebene Kommando ausgeführt und somit ein langes Boot-
mando das angebene Kommando ausgeführt und somit ein langes Boot-
Delay eingetragen.
Praktisch könnten Sie also in U-Boot "bootdelay" auf 0 setzen und
somit stets ohne jede User-Interaktion automatisch booten, außer,
wenn die beiden Tasten "F1" und "F2" beim Booten gedrückt werden:
dann würde ein Boot-Delay von 30 Sekunden eingefügt.
Praktisch könnten Sie also in U-Boot "bootdelay" auf 0 setzen und
somit stets ohne jede User-Interaktion automatisch booten, außer,
wenn die beiden Tasten "F1" und "F2" beim Booten gedrückt werden:
dann würde ein Boot-Delay von 30 Sekunden eingefügt.
Hinweis: dem Zeichen '#' kommt innerhalb von "magic_keys" eine beson-
dere Bedeutung zu: die dadurch definierte Key-Sequenz schaltet den
Monitor in den "Debug-Modus" - das bedeutet zunächst, daß alle weite-
ren Meldungen von U-Boot über das LCD-Display ausgegeben werden;
außerdem kann man durch das mit dieser Tastenkombination verknüpfte
Monitor in den "Debug-Modus" - das bedeutet zunächst, daß alle weite-
ren Meldungen von U-Boot über das LCD-Display ausgegeben werden;
außerdem kann man durch das mit dieser Tastenkombination verknüpfte
Kommando z. B. die Linux-Bootmeldungen ebenfalls auf das LCD-Display
legen, so daß der Boot-Vorgang direkt und ohne weitere Hilfsmittel
legen, so daß der Boot-Vorgang direkt und ohne weitere Hilfsmittel
analysiert werden kann.
Beispiel:
@ -107,20 +107,20 @@ chert:
(6) => setenv bootcmd bootp\;run nfsargs\;run addip\;run addfb\;bootm
Hierbei wird die Linux Commandline (in der Variablen "bootargs") im
Boot-Kommando "bootcmd" (6) schrittweise zusammengesetzt: zunächst
werden die für Root-Filesystem über NFS erforderlichen Optionen ge-
Boot-Kommando "bootcmd" (6) schrittweise zusammengesetzt: zunächst
werden die für Root-Filesystem über NFS erforderlichen Optionen ge-
setzt ("run nfsargs", vgl. (3)), dann die Netzwerkkonfiguration an-
gefügt ("run addip", vgl. (4)), und schließlich die Systemconsole
gefügt ("run addip", vgl. (4)), und schließlich die Systemconsole
definiert ("run addfb").
Dabei wird im Normalfall die Definition (5) verwendt; wurde aller-
dings beim Reset die entsprechende Taste gedrückt gehalten, so wird
diese Definition bei der Ausführung des in (2) definierten Kommandos
überschrieben, so daß Linux die Bootmeldungen auch über das Frame-
dings beim Reset die entsprechende Taste gedrückt gehalten, so wird
diese Definition bei der Ausführung des in (2) definierten Kommandos
überschrieben, so daß Linux die Bootmeldungen auch über das Frame-
buffer-Device (=LCD-Display) ausgibt.
Beachten Sie die Verdoppelung der '\'-Escapes in der Definition von
"key_cmd#" - diese ist erforderlich, weil der String _zweimal_ inter-
pretiert wird: das erste Mal bei der Eingabe von "key_cmd#", das
zweite Mal, wenn der String (als Inhalt von "preboot") ausgeführt
zweite Mal, wenn der String (als Inhalt von "preboot") ausgeführt
wird.

View File

@ -365,7 +365,7 @@ int board_early_init_f (void)
*
* This is just a preliminary fix, intended to turn off TENA
* as soon as possible to avoid noise on the network. Once
* I²C is running we will make sure the interface is
* I2C is running we will make sure the interface is
* correctly initialized.
*/
immr->im_cpm.cp_pbpar &= ~PB_ENET_TENA;

View File

@ -63,7 +63,7 @@
/* Mapping:
* +-------------+------------+------------+--------------------------------+
* ¦ PCI MemAddr | PCI IOAddr | Local Addr | Device / Function |
* | PCI MemAddr | PCI IOAddr | Local Addr | Device / Function |
* +-------------+------------+------------+--------------------------------+
* | 0x00000000 | | 0xA0000000 | ISA Memory (hard wired) |
* | 0x00FFFFFF | | 0xA0FFFFFF | |

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@ -1,7 +1,7 @@
# Porting U-Boot onto RPXClassic LF_BW31 board
# Written by Pierre AUBERT
# E-Mail p.aubert@staubli.com
# Stäubli Faverges - <www.staubli.com>
# Stäubli Faverges - <www.staubli.com>
#
# Sept. 20 2001
#

View File

@ -279,7 +279,7 @@ usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler cfq registered (default)
ColdFire internal UART serial driver version 1.00 ttyS0 at 0xfc060000 (irq = 90) is a builtin ColdFire UART

View File

@ -8,7 +8,7 @@ design, which is optimized for high speed throughput between the processor and
the memory, disk drive and Ethernet port subsystems.
MPC7448hpc2(Taiga) is designed to the micro-ATX chassis, allowing it to be
used in 1U or 2U rack-mount chassis¡¯, as well as in standard ATX/Micro-ATX
used in 1U or 2U rack-mount chassis¡¯, as well as in standard ATX/Micro-ATX
chassis.
Building U-Boot

View File

@ -1,5 +1,5 @@
/*
* Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
* Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
* Author: Tor Krill <tor@excito.com>
*
* This program is free software; you can redistribute it and/or

View File

@ -1,5 +1,5 @@
/*
* Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
* Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
* Author: Tor Krill <tor@excito.com>
*
* This program is free software; you can redistribute it and/or

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -2,7 +2,7 @@
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB
* Daniel Engström, Omicron Ceti AB
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2003
* David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
* David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -1,5 +1,5 @@
/* ported from ctfb.c (linux kernel):
* Created in Jan - July 2000 by Thomas Höhenleitner <th@visuelle-maschinen.de>
* Created in Jan - July 2000 by Thomas Höhenleitner <th@visuelle-maschinen.de>
*
* Ported to U-Boot:
* (C) Copyright 2002 Denis Peter, MPL AG Switzerland
@ -626,25 +626,25 @@ FindBestPQFittingMN (unsigned int p, unsigned int q, unsigned int mnmin,
/* that is the hardware < 69000 we have to manage
+---------+ +-------------------+ +----------------------+ +--+
| REFCLK |__|NTSC Divisor Select|__|FVCO Reference Divisor|__|÷N|__
| 14.3MHz | |(NTSCDS) (÷1, ÷5) | |Select (RDS) (÷1, ÷4) | | | |
| REFCLK |__|NTSC Divisor Select|__|FVCO Reference Divisor|__|÷N|__
| 14.3MHz | |(NTSCDS) (÷1, ÷5) | |Select (RDS) (÷1, ÷4) | | | |
+---------+ +-------------------+ +----------------------+ +--+ |
___________________________________________________________________|
|
| fvco fout
| +--------+ +------------+ +-----+ +-------------------+ +----+
+-| Phase |__|Charge Pump |__| VCO |_____|Post Divisor (PD) |___|CLK |--->
+-| Detect | |& Filter VCO| | | | |÷1, 2, 4, 8, 16, 32| | |
+-| Detect | |& Filter VCO| | | | |÷1, 2, 4, 8, 16, 32| | |
| +--------+ +------------+ +-----+ | +-------------------+ +----+
| |
| +--+ +---------------+ |
|____|÷M|___|VCO Loop Divide|__________|
| | |(VLD)(÷4, ÷16) |
|____|÷M|___|VCO Loop Divide|__________|
| | |(VLD)(÷4, ÷16) |
+--+ +---------------+
****************************************************************************
that is the hardware >= 69000 we have to manage
+---------+ +--+
| REFCLK |__|÷N|__
| REFCLK |__|÷N|__
| 14.3MHz | | | |
+---------+ +--+ |
__________________|
@ -652,12 +652,12 @@ FindBestPQFittingMN (unsigned int p, unsigned int q, unsigned int mnmin,
| fvco fout
| +--------+ +------------+ +-----+ +-------------------+ +----+
+-| Phase |__|Charge Pump |__| VCO |_____|Post Divisor (PD) |___|CLK |--->
+-| Detect | |& Filter VCO| | | | |÷1, 2, 4, 8, 16, 32| | |
+-| Detect | |& Filter VCO| | | | |÷1, 2, 4, 8, 16, 32| | |
| +--------+ +------------+ +-----+ | +-------------------+ +----+
| |
| +--+ +---------------+ |
|____|÷M|___|VCO Loop Divide|__________|
| | |(VLD)(÷1, ÷4) |
|____|÷M|___|VCO Loop Divide|__________|
| | |(VLD)(÷1, ÷4) |
+--+ +---------------+

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* (C) Copyright 2005

View File

@ -3,7 +3,7 @@
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2002
# Stäubli Faverges - <www.staubli.com>
# Stäubli Faverges - <www.staubli.com>
# Pierre AUBERT p.aubert@staubli.com
#
#

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
* Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
*
* See file CREDITS for list of people who contributed to this
* project.

View File

@ -532,9 +532,9 @@
#define CONFIG_SYS_ISA_MEM_BASE_ADDRESS 0x78000000
/*
Die Grafik-Treiber greifen über die Adresse in diesem Macro auf den Chip zu.
Die Grafik-Treiber greifen über die Adresse in diesem Macro auf den Chip zu.
Das funktioniert bei deren Karten, weil sie eine PCI-Bridge benutzen, die
das gleiche Mapping durchführen kann, wie der SC520 (also Aufteilen von IO-Zugriffen
das gleiche Mapping durchführen kann, wie der SC520 (also Aufteilen von IO-Zugriffen
auf ISA- und PCI-Zyklen)
*/
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0xE8000000

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@ -115,7 +115,7 @@ struct mtd_info {
u_int32_t flags;
uint64_t size; /* Total size of the MTD */
/* "Major" erase size for the device. Naïve users may take this
/* "Major" erase size for the device. Naïve users may take this
* to be the only erase size available, or may use the more detailed
* information below if they desire
*/

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* See file CREDITS for list of people who contributed to this

View File

@ -1,6 +1,6 @@
/*
* (C) Copyright 2002
* Stäubli Faverges - <www.staubli.com>
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
*
* (C) Copyright 2005

View File

@ -41,7 +41,7 @@ HISTORY of the LZMA SDK
4.57 2007-12-12
-------------------------
- Speed optimizations in Ñ++ LZMA Decoder.
- Speed optimizations in Ñ++ LZMA Decoder.
- Small changes for more compatibility with some C/C++ compilers.

View File

@ -79,7 +79,7 @@ phys_size_t initdram(int board_type)
mtsdram(SDRAM0_B0CR, 0x00082001);
mtsdram(SDRAM0_TR0, 0x41094012);
mtsdram(SDRAM0_TR1, 0x8080083d); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
mtsdram(SDRAM0_RTR, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */
mtsdram(SDRAM0_RTR, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */
mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM*/
/*