Commit graph

57 commits

Author SHA1 Message Date
Albert ARIBAUD
cc49da249c Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' 2014-06-02 08:43:48 +02:00
Simon Glass
913702ca39 power: Rename CONFIG_PMIC_... to CONFIG_POWER_...
Commit be3b51aa did this mostly, but several have been added since. Do the
job again.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-05-28 10:58:18 +09:00
Fabio Estevam
6ca896f923 mx53loco: Convert to generic board
Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on
boot:

"Warning: Your board does not use generic board. Please read
doc/README.generic-board and take action. Boards not
upgraded by the late 2014 may break or be removed."

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-04-28 10:45:55 +02:00
Stefano Babic
1cad23c5f4 Merge branch 'master' of git://git.denx.de/u-boot-arm into master
Conflicts:
	arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
	arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg

Signed-off-by: Stefano Babic <sbabic@denx.de>
2014-04-04 11:35:30 +02:00
Marek Vasut
31c832f93c arm: mx5: Avoid hardcoding memory sizes on MX53QSB
The DRAM size can be easily detected at runtime on i.MX53. Implement
such detection on MX53QSB and adjust the rest of the macros accordingly
to use the detected values.

An important thing to note here is that we had to override the function
for trimming the effective DRAM address, get_effective_memsize(). That
is because the function uses CONFIG_MAX_MEM_MAPPED as the upper bound of
the available DRAM and we don't have gd->bd->bi_dram[0].size set up at
the time the function is called, thus we cannot put this into the macro
CONFIG_MAX_MEM_MAPPED . Instead, we use custom override where we use the
size of the first DRAM block which we just detected.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
2014-03-31 18:28:51 +02:00
Marek Vasut
f79a023f41 arm: mx5: Fix memory slowness on MX53QSB
Fix memory access slowness on i.MX53 MX53QSB board. Let us inspect the
issue: First of all, the i.MX53 CPU has two memory banks mapped at
0x7000_0000 and 0xb000_0000 and each of those can hold up to 1GiB of
DRAM memory. Notice that the memory area is not continuous. On MX53QSB,
each of the banks contain 512MiB of DRAM, which makes a total of 1GiB
of memory available to the system.

The problem is how the relocation of U-Boot is treated on i.MX53 . The
U-Boot is placed at the ((start of first DRAM partition) + (gd->ram_size)) .
This in turn poses a problem, since in our case, the gd->ram_size is 1GiB,
the first DRAM bank starts at 0x7000_0000 and contains 512MiB of memory.
Thus, with this algorithm, U-Boot is placed at offset:

    0x7000_0000 + 1GiB - sizeof(u-boot and some small margin)

This is past the DRAM available in the first bank on MX53QSB, but is still
within the address range of the first DRAM bank. Because of the memory
wrap-around, the data can still be read and written to this area, but the
access is much slower.

There were two ideas how to solve this problem, first was to map both of
the available DRAM chunks next to one another by using MMU, second was to
define CONFIG_VERY_BIG_RAM and CONFIG_MAX_MEM_MAPPED to size of the memory
in the first DRAM bank. We choose the later because it turns out the former
is not applicable afterall. The former cannot be used in case Linux kernel
was loaded into the second DRAM bank area, which would be remapped and one
would try booting the kernel, since at some point before the kernel is started,
the MMU would be turned off, which would destroy the mapping and hang the
system.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
2014-03-31 18:28:51 +02:00
Gerhard Sittig
a743415f12 tegra: imx: omap: enable Moschip USB ethernet support for several boards
enable support for the Moschip USB ethernet adapter for those boards
which previously had support for "all other" USB ethernet adapters
(that's Asix _and_ SMSC) enabled -- which applies to harmony, m53evk,
mx53loco, nitrogen6x, omap3_beagle

Signed-off-by: Gerhard Sittig <gsi@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
2014-03-12 17:04:34 -04:00
Otavio Salvador
f28154b5b5 mx53loco: Set default environment to use zImage
Change the default environment to use zImage instead of uImage, this
requires changes to the default environment to load a file named
zImage instead of uImage, and to use the 'bootz' command instead of
'bootm' when booting the kernel.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2014-02-11 11:04:41 +01:00
Fabio Estevam
0159995841 configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option
According to the README:

"- CONFIG_SYS_SPD_BUS_NUM
		If SPD EEPROM is on an I2C bus other than the first
		one, specify here. Note that the value must resolve
		to something your driver can deal with."

There is no SPD EEPROM on the imx boards, so ged rid of this option.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-12-17 18:38:42 +01:00
Fabio Estevam
85164e0c54 configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
There is no real benefit in adding the board name into U-boot's prompt, so
remove the custom CONFIG_SYS_PROMPT definitions so that the standard "=> "
prompt is used across FSL boards.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-11-13 10:09:09 +01:00
Rob Herring
f232950f82 config: remove platform CONFIG_SYS_HZ definition part 2/2
Remove platform CONFIG_SYS_HZ definition for configs a-z*.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-11-04 11:06:16 -05:00
trem
b089d039b1 i2c: update config using mxc driver to new subsystem
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
2013-10-17 07:20:25 +02:00
Wolfgang Denk
3765b3e7bd Coding Style cleanup: remove trailing white space
Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-10-14 16:06:53 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Otavio Salvador
254fd8da45 mx53loco: Change default environment to cope with OE changes
OpenEmbedded has change partitioning layout of generated image so it
does not raise warnings during the boot regarding unkown partition
being used for U-Boot.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Jason Liu <r64343@freescale.com>
2013-07-12 13:04:13 +02:00
Otavio Salvador
e0df5353fb mx53loco: Add support to dynamically choose between fdt use or not
The CONFIG_SYS_CBSIZE has been change to 512 to avoid runtime errors as:

,---[ Runtime error ]
| Hit any key to stop autoboot:  0
| MX53LOCO U-Boot > pri netboot
| netboot=echo Booting from net ...; run netargs; if test ...
| prefetch abort
| pc : [<20747368>]          lr : [<20747365>]
| sp : af566e20  ip : 00000000     fp : 00000000
| r10: 00000002  r9 : af6dfc28     r8 : af566f58
| r7 : af6dfc10  r6 : 00000001     r5 : 00000002  r4 : 74206669
| r3 : 00000000  r2 : 00000060     r1 : 00000020  r0 : 0000018e
| Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
| Resetting CPU ...
|
| resetting ...
`---

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2013-01-13 11:53:45 +01:00
Fabio Estevam
54bb84115d mx53loco: Call PMIC related functions from board_late_init()
Since commit c733681 (pmic: Extend PMIC framework to support multiple instances
of PMIC devices) mx53loco fails to allocate the memory for PMIC:

U-Boot 2013.01-rc2-dirty (Dec 20 2012 - 15:55:01)

Board: MX53 LOCO
I2C:   ready
DRAM:  1 GiB
pmic_alloc: No available memory for allocation!
pmic_init: POWER allocation error!
CPU:   Freescale i.MX53 family rev2.0 at 800 MHz
Reset cause: POR
MMC:   FSL_SDHC: 0, FSL_SDHC: 1

Calling the PMIC related functions at a later stage, ie, from board_late_init()
fixes the issue.

Reported-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Stefano Babic <sbabic@denx.de>
2012-12-27 11:03:43 +01:00
Otavio Salvador
fe51f78714 mx53loco: Change default loadaddr to 0x72000000
This allow use of mainline and Freescale BSP Linux kernel with same
environment.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2012-12-26 12:08:28 +01:00
Otavio Salvador
aef8af6a3d mx53loco: We shouldn't hardcode a rootfs filesystem type
For a generic environment, we shouldn't have a fixed rootfs filesystem
so we drop it from env.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2012-12-26 12:05:54 +01:00
Stefano Babic
05a860c228 Merge branch 'master' of git://git.denx.de/u-boot into master
Conflicts:
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/woodburn_common.h
	board/woodburn/woodburn.c

These boards still use the old old PMIC framework, so they
do not merge properly after the power framework was merged into
mainline.

Fix all conflicts and update woodburn to use Power Framework.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2012-12-08 12:02:45 +01:00
Fabio Estevam
fbae0d108e mx53loco: Configure CONFIG_BOOTDELAY to one second
One second is enough time for users to react in case they want to stop the
booting process.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-11-19 08:49:01 +01:00
Łukasz Majewski
2988e8662b power:pmic: Rename CONFIG_DIALOG_PMIC defines to CONFIG_DIALOG_POWER
Rename CONFIG_DIALOG_PMIC to CONFIG_DIALOG_POWER

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-14 11:21:12 +01:00
Łukasz Majewski
be3b51aa4a power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER
Rename all CONFIG_PMIC* defines to CONFIG_POWER*

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
2012-11-14 11:21:12 +01:00
Stefano Babic
3e4d27b06d Merge git://git.denx.de/u-boot 2012-11-10 08:05:54 +01:00
Albert ARIBAUD
f04821a8ca Merge remote-tracking branch 'u-boot-imx/master' 2012-10-27 11:43:17 +02:00
Fabio Estevam
c14ab2ae13 mx53loco: Allow booting a zImage kernel
Allow booting a zImage kernel.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-26 16:28:08 +02:00
Fabio Estevam
4cfc6c4fa7 pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH
Introduce FSL_PMIC_I2C_LENGTH to configure the number of bytes that are used to
communicate with the PMIC via I2C.

Instead of hardcoding the value, pass the number via a configurable option per
PMIC type.

This will be useful for adding support for PMIC MC34704 from Freescale, which
uses only one byte in its I2C protocol.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-26 16:28:07 +02:00
Andrew Bradford
669681104d configs: Fix usage of mmc rescan
Fix usage of 'mmc rescan' by many configs.  Proper use is
'mmc dev ${mmcdev}; mmc rescan' to set the mmc device and then rescan
the device.  'mmc rescan' itself does not take any arguments.

Signed-off-by: Andrew Bradford <andrew@bradfordembedded.com>
2012-10-23 08:33:17 -07:00
Fabio Estevam
eca04423d1 configs: mx53loco: Remove CONFIG_HAS_ETH1
mx53loco has only one Ethernet port, so remove CONFIG_HAS_ETH1 option.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-17 18:09:34 +02:00
Fabio Estevam
c606608a34 mx53loco: Adapt the IPU clock
Since PLL2 now has changed, it is necessary to adapt the CONFIG_IPUV3_CLK
accordingly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-17 18:09:34 +02:00
Benoît Thébaudeau
833b6435de mx5/6: Define default SoC input clock frequencies
Define default SoC input clock frequencies for i.MX5/6 in order to get rid of
duplicated definitions.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Jason Liu <r64343@freescale.com>
Cc: Matt Sealey <matt@genesi-usa.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
2012-10-15 11:54:10 -07:00
Rob Herring
3d6ba91e79 ARM: Remove unused stack and irq config defines
CONFIG_STACKSIZE is not referenced anywhere except on AVR32, but present
in most ARM board config files.

IRQs are only enabled for 1 config, so remove the unused config options
for IRQ and FIQ stack size as well.

Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-09-01 14:58:22 +02:00
Stefano Babic
3e0773708d MX5: mx53loco: do not overwrite the console
On this board, the console is always set to the serial line.
Do not allow to overwrite it when video is enabled.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-09-01 14:58:18 +02:00
Fabio Estevam
f28e26951a configs: Remove unused symbol CONFIG_DISCOVER_PHY
CONFIG_DISCOVER_PHY is not used anywhere, so remove it from config files.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-08-09 22:32:05 +02:00
Wolfgang Denk
66714b1a6d Merge branch 'next' of git://git.denx.de/u-boot-video
* 'next' of git://git.denx.de/u-boot-video:
  ipu_common: Add ldb_clk for use in parenting the pixel clock
  ipu_common: Do not hardcode the ipu_clk frequency
  ipu_common: Rename MXC_CCM_BASE
  ipu_common: Let clk_ipu_enable/disable only run on MX51 and MX53
  ipu_common: Only apply the erratum to MX51
  video: Rename CONFIG_VIDEO_MX5
  mx6: Allow mx6 to access the IPUv3 registers
  common lcd: minor coding style changes

Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-07-18 10:47:03 +02:00
Troy Kisky
de6f604de2 mxc_i2c: specify i2c base address in config file
The following platforms had their config files changed
flea3, imx31_phycore, mx35pdk, mx53ard, mx53evk, mx53smd
and mx53loco.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-07-11 10:54:29 +02:00
Fabio Estevam
9fbdb1aac5 ipu_common: Do not hardcode the ipu_clk frequency
Do not hardcode the ipu_clk frequency and let the board file pass this value.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-07-10 11:35:39 +02:00
Fabio Estevam
695af9abc6 video: Rename CONFIG_VIDEO_MX5
Rename CONFIG_VIDEO_MX5 as this driver can also be used on mx6.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-07-10 11:35:38 +02:00
Fabio Estevam
fd8223eaa9 mx53loco: Remove CONFIG_SYS_I2C_SLAVE definition
According to include/i2c.h:

"/*
 * Many boards/controllers/drivers don't support an I2C slave interface so
 * provide a default slave address for them for use in common code.  A real
 * value for CONFIG_SYS_I2C_SLAVE should be defined for any board which does
 * support a slave interface.
 */
#ifndef	CONFIG_SYS_I2C_SLAVE
#define	CONFIG_SYS_I2C_SLAVE	0xfe
#endif
"

As the mxc_i2c driver does not support slave mode, there is no need
to define CONFIG_SYS_I2C_SLAVE in i.MX board file.

Cc: Jason Liu <r64343@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-07-07 14:07:28 +02:00
Fabio Estevam
eae08eb2b5 mx53loco: Fix revision of Dialog boards
Original code was assuming that the fuse revision version for all mx53loco boards
based on Dialog PMIC was the same, which is not the case.

Force the revision of all Dialog-based boards to 0.

This fixes a kernel crash when PMIC is accessed in the 2.6.35 kernel
for Dialog rev E boards.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2012-07-07 14:07:25 +02:00
Tom Rini
219f4788d3 hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c
Exactly one board has defined CONFIG_SYS_PROMPT_HUSH_PS2 to a value
different than "> " which is vision2.  I have Cc'd the maintainer here
as I strongly suspect this is a bug rather than intentional behavior.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-06-20 20:36:51 +02:00
Tom Rini
26750c8aee CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there
We provide a default table of { 9600, 19200, 38400, 57600, 115200 }
in <config_fallbacks.h> which mkconfig places after <configs/...h> in
the generated config file.  This is used when a board has not set its
own table.

Signed-off-by: Tom Rini <trini@ti.com>
2012-06-20 20:26:16 +02:00
Fabio Estevam
f714b0a911 mx53loco: Add LCD support
Add support for CLAA07LC0ACW LCD that connects to the mx53loco board.

Configure the board to show the Linux logo on the LCD.

Also increase the size of CONFIG_SYS_MALLOC_LEN variable to take into account
the framebuffer usage.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Jason Liu <r64343@freescale.com>
2012-05-25 10:40:32 +02:00
Fabio Estevam
54cd1dee8f mx53loco: Add CONFIG_REVISION_TAG
FSL 2.6.35 kernel assumes that the bootloader passes the CONFIG_REVISION_TAG information.

The kernel uses this data to distinguish between Dialog versus mc34708 based boards,
and also to distinguish between revA and revB of the mc34708 based boards.

Suggested-by: Yu Li <yk@magniel.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15 08:31:34 +02:00
Fabio Estevam
5b547f3c20 mx53loco: Add mc34708 support and set mx53 frequency at 1GHz
Add mc34708 support and set mx53 core frequency at its maximum value of 1GHz.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Jason Liu <r64343@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15 08:31:34 +02:00
Fabio Estevam
e7e337227b mx53loco: Add support for 1GHz operation for DA9053-based boards
There are two types of mx53loco boards: initial boards were built with a Dialog
DA9053 PMIC and more recent version is based on a Freescale MC34708 PMIC.

Add DA9053 PMIC support and adjust the required voltages and clocks for running
the CPU at 1GHz.

Tested on both versions of mx53loco boards.

In the case of a MC34708-based board the CPU operating voltage remains at 800MHz.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by : Stefano Babic <sbabic@denx.de>
2012-05-15 08:31:32 +02:00
Fabio Estevam
1fc56f1cb0 mx53loco: Allow to print CPU information at a later stage
Print CPU information within board_late_init().

This is in preparation for adding 1GHz support, which requires programming a PMIC
via I2C. As I2C is only available after relocation, print the CPU information
later at board_late_init(), so that the CPU frequency can be printed correctly.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-05-15 08:31:32 +02:00
Stefano Babic
f92e4e6c19 MX53: mx53loco: Add SATA support
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Jason Liu <jason.hui@linaro.org>
Acked-by: Jason Liu <jason.hui@linaro.org>
2012-05-15 08:31:31 +02:00
Wolfgang Grandegger
45cf6ada60 USB: mx53loco: add end enable USB host support on port 1
Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Jason Liu <r64343@freescale.com>
2011-12-11 14:49:50 +01:00
Stefano Babic
40f6fffee5 MX: serial_mxc: cleanup removing nasty #ifdef
The serial driver for iMX SOCs is continuosly changed if a
new SOC or not yet used port is used. CONFIG_SYS_<SOC>_<UART Port>
defines were used only to find the base address for the selected UART.
Instead of that, move the base address to the board configuration
file and drop all #ifdef from driver.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
CC: Helmut Raiger <helmut.raiger@hale.at>
CC: John Rigby <jcrigby@gmail.com>
CC: Matthias Weisser <weisserm@arcor.de>
CC: Jason Liu <jason.hui@linaro.org>
Acked-by: Jason Liu <jason.hui@linaro.org>
2011-12-06 23:59:40 +01:00