Commit graph

564 commits

Author SHA1 Message Date
Andreas Bießmann
5c390a5b26 arm:at91: enable ROM loadable atmel image
For sama5d3xek we need to modify the SPL image for correct detection by ROM
code.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
2014-05-27 00:10:49 +02:00
Andreas Bießmann
7b1a411743 mkimage: add atmelimage
The new atmelimage converts a machine code BLOB to bootable ROM image. Atmel
ROM has no sophisticated image format, it only checks the first 7 ARM vectors.
The vectors can contain valid B or LDR opcodes, the 6'th vector contains the
image size to load.

Additionally the PMECC header can be written by the atmelimage target. The
parameters must be given via the -n switch as a coma separated list. For
example:

mkimage -T atmelimage \
 -n usePmecc=1,sectorPerPage=4,sectorSize=512,spareSize=64,eccBits=4,eccOffset=36 \
 -d spl/u-boot-spl.bin boot.bin

A provided image can be checked for correct header setup. It prints out the
PMECC header parameters if it has one and the 6'th interrupt vector content.

---8<---
Image Type:	ATMEL ROM-Boot Image with PMECC Header
		PMECC header
		====================
		eccOffset:        36
		sectorSize:      512
		eccBitReq:         4
		spareSize:        64
		nbSectorPerPage:   4
		usePmecc:          1
		====================
		6'th vector has 17044 set
--->8---

A SPL binary modified with the atmelimage mkimage target was succesfully
booted on a sama5d34ek via MMC and NAND.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Heiko Schocher <hs@denx.de>
Tested-by: Bo Shen <voice.shen@atmel.com>
2014-05-27 00:10:48 +02:00
Ian Campbell
50827a5991 sunxi: non-FEL SPL boot support for sun7i
Add support for booting from an MMC card.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Henrik Nordström <henrik@henriknordstrom.net>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Tom Cubie <Mr.hipboi@gmail.com>
Reviewed-by: Tom Rini <trini@ti.com>
2014-05-25 16:31:03 +02:00
Simon Glass
6be6b6bcba patman: Suppress duplicate signoffs only for real patches
There is an unfortunate bug in the signoff suppression logic. The first
pass is performed with 'git log', and all signoffs are added to the
supression set, such that the second time (when processing the real
patches) we always suppress the signoffs.

Correct this by only suppressing signoffs in the second pass.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Tested-by: Andreas Bießmann <andreas.devel@googlemail.com>
2014-05-16 11:42:29 -07:00
Tom Rini
e7d4a88e69 Merge branch 'master' of git://git.denx.de/u-boot-video 2014-05-13 07:31:00 -04:00
Marek Vasut
cd834a053b tools: env: Add aes.c placeholder
Add missing aes.c placeholder which includes lib/aes.c . Without this
one, tools/env/ will fail to build.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Alexey Brodkin <abrodkin@synopsys.com>
Tested-by: Heiko Schocher <hs@denx.de>
2014-05-12 15:20:05 -04:00
Tom Rini
f4617ef86d Merge branch 'tom' of git://git.denx.de/u-boot-x86 2014-05-09 18:48:26 -04:00
Simon Glass
102061bd8b patman: Avoid duplicate sign-offs
Keep track of all Signed-off-by tags in a commit and silently suppress any
duplicates.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-05-09 14:50:45 -06:00
Simon Glass
757f64a89b patman: Deal with 'git apply' failures correctly
This sort of failure is rare, but the code to deal with it is wrong.
Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-05-09 14:50:39 -06:00
Albert ARIBAUD
d2a3e91139 Merge branch 'u-boot/master'
Conflicts:
	drivers/net/Makefile

(trivial merge)
2014-05-09 11:50:14 +02:00
Thomas Diener
e1ae71d8f4 logos: Update of the syteco company logo
Signed-off-by: Thomas Diener <dietho@gmx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2014-05-05 11:21:23 +02:00
Daniel Schwierzeck
e0ba929982 buildman: make output dir configurable
Add an option to specify the output directory to override the
default path '../'. This is useful for building in a ramdisk.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-04-18 16:14:13 -04:00
Masahiro Yamada
e1b7e1e3cf tools: fix Makefile to clean-up fit_info and fit_check_sign
We should avoid the description in Makefile like this

ifdef CONFIG_FIT_SIGNATURE
hostprogs-y += fit_info$(SFX) fit_check_sign$(SFX)
endif

Otherwise, fit_info and fit_check_sign would never be cleaned
by "make clean".

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Heiko Schocher <hs@denx.de>
2014-04-18 10:42:29 -04:00
Karicheri, Muralidharan
bf411ea9f1 tools: mkimage: add support for gpimage format
This patch add support for gpimage format as a preparatory
patch for porting u-boot for keystone2 devices and is
based on omapimage format. It re-uses gph header to store the
size and loadaddr as done in omapimage.c

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Tom Rini <trini@ti.com>
2014-04-17 17:24:38 -04:00
Tom Rini
229695fee9 fw_env.c: Switch get_config to use '%ms' in sscanf
We currently limit ourself to 16 characters for the device name to read
the environment from.  This is insufficient for /dev/mmcblk0boot1 to
work for example.  Switch to '%ms' which gives us a dynamically
allocated buffer instead.  We're short lived enough to not bother
free()ing the buffer.

Signed-off-by: Tom Rini <trini@ti.com>
2014-04-17 14:39:54 -04:00
Tom Rini
0f507779ca Merge branch 'next' 2014-04-17 14:33:25 -04:00
Simon Glass
659c89da8e patman: Use Patch-cc: instead of Cc:
Add a new Patch-cc: tag which performs the service now provided by
the Cc: tag. The Cc: tag is interpreted by git send-email but
ignored by patman.

So now:

  Cc: patman does nothing. (git send-email can cc patches)
  Patch-cc: patman Cc's patch and removes this tag from the patch

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-22 14:47:30 -06:00
Marek Vasut
a8a752c084 env: Implement support for AES encryption into fw_* tools
Implement support for encrypting/decrypting the environment block
into the tools/env/fw_* tools. The cipher used is AES 128 CBC and
the implementation depends solely on components internal to U-Boot.

To allow building against the internal AES library, the library did
need minor adjustments to not include U-Boot's headers which are not
wanted to be included and define missing types.

Signed-off-by: Marek Vasut <marex@denx.de>
2014-03-21 16:44:08 -04:00
Heiko Schocher
29a23f9d6c tools, fit_check_sign: verify a signed fit image
add host tool "fit_check_sign" which verifies, if a fit image is
signed correct.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Simon Glass <sjg@chromium.org>
2014-03-21 16:40:38 -04:00
Heiko Schocher
6bf4ca076f tools, fit: add fit_info host command
add fit_info command to the host tools. This command prints
the name, offset and the len from a property from a node in
a fit file. This info can be used to extract a properties
data with linux tools, for example "dd".

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Simon Glass <sjg@chromium.org>
2014-03-21 16:39:37 -04:00
Heiko Schocher
2842c1c242 fit: add sha256 support
add sha256 support to fit images

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Simon Glass <sjg@chromium.org>
2014-03-21 16:39:33 -04:00
Heiko Schocher
66b36f833a tools/image-host: fix sign-images bug
property "sign-images" is never found, fix this.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Simon Glass <sjg@chromium.org>
2014-03-21 16:39:31 -04:00
Masahiro Yamada
01286329b2 kbuild: rename SRCTREE to srctree
Prior to Kbuild, $(TOPDIR) or $(SRCTREE) was used for
pointing to the top of source directory.
(No difference between the two.)

In Kbuild style, $(srctree) is used for instead.
This commit renames SRCTREE to srctree and deletes the
defition of SRCTREE.

Note that SRCTREE in scripts/kernel-doc, scripts/docproc.c,
doc/DocBook/Makefile should be keep.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-03-12 17:04:57 -04:00
Dustin Byford
4b774ff114 fw_env: correct writes to devices with small erase blocks
Some NOR flash devices have a small erase block size.  For example, the
Micron N25Q512 can erase in 4K blocks.  These devices expose a bug in
fw_env.c where flash_write_buf() incorrectly calculates bytes written
and attempts to write past the environment sectors.  Luckily, a range
check prevents any real damage, but this does cause fw_setenv to fail
with an error.

This change corrects the write length calculation.

The bug was introduced with commit 56086921 from 2008 and only affects
configurations where the erase block size is smaller than the total
environment data size.

Signed-off-by: Dustin Byford <dustin@cumulusnetworks.com>
2014-03-12 17:04:29 -04:00
Dustin Byford
23869bf80b fw_env: calculate default number of env sectors
The assumed number of environment sectors (always 1) leads to an
incorrect top_of_range calculation in fw.env.c when a flash device has
an erase block size smaller than the environment data size (number of
environment sectors > 1).

This change updates the default number of environment sectors to at
least cover the size of the environment.

Also corrected a false statement about the number of sectors column in
fw_env.config.

Signed-off-by: Dustin Byford <dustin@cumulusnetworks.com>
2014-03-12 17:04:28 -04:00
Masahiro Yamada
603f51cbd2 kbuild: tools: fix a bug that always builds Denx logo
LOGO_BMP was never overwritten by board-specific or
vendor-specific logos.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Reported-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
2014-03-04 12:15:31 -05:00
Masahiro Yamada
db5b339cca kbuild: add "cross_tools" target to build tools for the target
Programs in tools/ directory are usually built for the host.
But some of them (mkimage, dumpimge, gen_eth_addr, etc.) are
useful on the target OS too.

Actually, prior to Kbuild, U-Boot could build tools for
the target like follows:

  $ make <target_board>_config
  $ export CROSS_COMPILE=<cross_gcc_prefix>
  $ make HOSTCC=${CROSS_COMPILE}gcc HOSTSTRIP=${CROSS_COMPILE}strip tools

In Kbuild, we can no longer replace HOSTCC at the command line.

In order to get back that feature, this commit adds "cross-tools" target.

Usage:

  Build tools for the host
  $ make CROSS_COMPILE=<cross_gcc_prefix> tools

  Build tools for the target
  $ make CROSS_COMPILE=<cross_gcc_prefix> cross_tools

Besides, "make cross_tools" strip tools programs because we
generally expect smaller storages on embedded systems.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Reported-by: Heiko Schocher <hs@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Tom Rini <trini@ti.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
2014-03-04 12:15:31 -05:00
Masahiro Yamada
6a44d80634 kbuild: move asm-offsets.h rules to ./Kbuild
Generate include/generated/generic-asm-offsets.h and
include/generated/asm-offsets.h in ./Kbuild.

This commit also changes the include guard.

Before this commit, __ASM_OFFSETS_H__ was used for both of them.
So we could not include generic-asm-offsets.h and asm-offsets.h
at the same time.

This commit renames the include guard of the former to
__GENERIC_ASM_OFFSETS_H__.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-25 11:01:28 -05:00
Masahiro Yamada
8fac9c7b7d kernel-doc: move kernel-doc tools to scripts/
tools/kernel-doc/docproc.c and tools/kernel-doc/kernel-doc are
files imported from Linux Kernel.

They originally resided under scripts/ directory in Linux Kernel.

This commit moves them to the original location.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19 11:10:04 -05:00
Masahiro Yamada
79fc0c5f49 tools/env: cross-compile fw_printenv without setting HOSTCC
fw_printenv is a program which mostly runs on the target Linux.

Before switching to Kbuild, we needed to set HOSTCC at the
command line like this:
    make HOSTCC=<your CC cross-compiler> env

Going forward we can cross compile it by specifying CROSS_COMPILE:
    make CROSS_COMPILE=<your cross-compiler prefix> env
This looks more natural.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Gerhard Sittig <gsi@denx.de>
2014-02-19 11:10:04 -05:00
Masahiro Yamada
2887c47338 Makefile: refactor tools-all targets
- Move "easylogo", "gdb" tagets to tools/Makefile
 - Delete "gdbtools" target (same as "gdb")

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-19 11:10:04 -05:00
Masahiro Yamada
6825a95b0b kbuild: use Linux Kernel build scripts
Now we are ready to switch over to real Kbuild.

This commit disables temporary scripts:
  scripts/{Makefile.build.tmp, Makefile.host.tmp}
and enables real Kbuild scripts:
  scripts/{Makefile.build,Makefile.host,Makefile.lib}.

This switch is triggered by the line in scripts/Kbuild.include
  -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj
  +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj

We need to adjust some build scripts for U-Boot.
But smaller amount of modification is preferable.

Additionally, we need to fix compiler flags which are
locally added or removed.

In Kbuild, it is not allowed to change CFLAGS locally.
Instead, ccflags-y, asflags-y, cppflags-y,
CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o
are prepared for that purpose.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Gerhard Sittig <gsi@denx.de>
2014-02-19 11:07:50 -05:00
Masahiro Yamada
9e4140329e kbuild: change out-of-tree build
This commit changes the working directory
where the build process occurs.

Before this commit, build process occurred under the source
tree for both in-tree and out-of-tree build.

That's why we needed to add $(obj) prefix to all generated
files in makefiles like follows:
  $(obj)u-boot.bin:  $(obj)u-boot

Here, $(obj) is empty for in-tree build, whereas it points
to the output directory for out-of-tree build.

And our old build system changes the current working directory
with "make -C <sub-dir>" syntax when descending into the
sub-directories.

On the other hand, Kbuild uses a different idea
to handle out-of-tree build and directory descending.

The build process of Kbuild always occurs under the output tree.
When "O=dir/to/store/output/files" is given, the build system
changes the current working directory to that directory and
restarts the make.

Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj=<sub-dir>"
syntax for descending into sub-directories.
(We can write it like "make $(obj)=<sub-dir>" with a shorthand.)
This means the current working directory is always the top
of the output directory.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Gerhard Sittig <gsi@denx.de>
2014-02-19 11:07:50 -05:00
Masahiro Yamada
fea1ca8e34 Makefile: refactor include path settings
This commit merges commonly-used header include paths
to UBOOTINCLUDE and NOSTDINC_FLAGS variables, which are placed
at the top Makefile.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-19 11:07:50 -05:00
Masahiro Yamada
34bd050709 Makefile: move BFD_ROOT_DIR to tools/gdb/Makefile
BFD_ROOT_DIR is used only in tools/gdb/Makefile

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-19 11:07:50 -05:00
Masahiro Yamada
940db16d2e tools: convert makefiles to kbuild style
Before this commit, makefiles under tools/ directory
were implemented with their own way.

This commit refactors them by using "hostprogs-y" variable.

Several C sources have been added to wrap other C sources
to simplify Makefile.
For example, tools/crc32.c includes lib/crc32.c

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-19 11:07:49 -05:00
Ian Campbell
054c838834 tools: correct proftool build rule
The incorrect substitution made it rebuild every time.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-02-19 10:47:38 -05:00
Masahiro Yamada
e60cfd531a relocate-rela: replace a magic number with sizeof(Elf64_Rela)
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: David Feng <fenghua@phytium.com.cn>
Acked-by: Scott Wood <scottwood@freescale.com>
2014-02-13 15:16:47 +01:00
Masahiro Yamada
901d0ea1fc tools: move kermit files to tools/kermit directory
The script files, define2mk.sed and make-asm-offsets
are used to create autoconf.mk and asm-offsets.h
while build.

Whereas README, dot.kermrc, flash_param, send_cmd, send_image
are files useful for kermit.

We should not put files which have the totally different purpose
into the same directory.

This commit creates a new directory, tools/kermit,
and move kermit files into it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
2014-01-24 16:59:07 -05:00
Masahiro Yamada
26d2857485 cosmetic: tools/scripts/README: insert only one space between words
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-01-24 16:59:07 -05:00
Masahiro Yamada
84977e44eb .gitignore: ignore u-boot.elf and tools/relocate-rela
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-01-20 10:09:51 -05:00
Tom Rini
7f673c99c2 Merge branch 'master' of git://git.denx.de/u-boot-arm
Bringing in the MMC tree means that CONFIG_BOUNCE_BUFFER needed to be
added to include/configs/exynos5-dt.h now.

Conflicts:
	include/configs/exynos5250-dt.h

Signed-off-by: Tom Rini <trini@ti.com>
2014-01-10 10:56:00 -05:00
Scott Wood
8137af19e7 arm64: Add tool to statically apply RELA relocations
ARM64 uses the newer RELA-style relocations rather than the older REL.
RELA relocations have an addend in the relocation struct, rather than
expecting the loader to read a value from the location to be updated.

While this is beneficial for ordinary program loading, it's problematic
for U-Boot because the location to be updated starts out with zero,
rather than a pre-relocation value.  Since we need to be able to run C
code before relocation, we need a tool to apply the relocations at
build time.

In theory this tool is applicable to other newer architectures (mainly
64-bit), but currently the only relocations it supports are for arm64,
and it assumes a 64-bit little-endian target.  If the latter limitation
is ever to be changed, we'll need a way to tell the tool what format
the image is in.  Eventually this may be replaced by a tool that uses
libelf or similar and operates directly on the ELF file.  I've written
some code for such an approach but libelf does not make it easy to poke
addresses by memory address (rather than by section), and I was
hesitant to write code to manually parse the program headers and do the
update outside of libelf (or to iterate over sections) -- especially
since it wouldn't get test coverage on things like binaries with
multiple PT_LOAD segments.  This should be good enough for now to let
the manual relocation stuff be removed from the arm64 patches.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Feng <fenghua@phytium.com.cn>
2014-01-09 16:08:22 +01:00
Albert ARIBAUD
4b0561d841 Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' 2014-01-06 09:32:42 +01:00
Albert ARIBAUD
a891601ce5 Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Conflicts:
	include/micrel.h

The conflict above was trivial, caused by four lines being
added in both branches with different whitepace.
2014-01-06 08:49:58 +01:00
Rajeshwari Birje
0fcac1abde SPL: EXYNOS: Prepare for variable size SPL support
When variable size SPL is used, the BL1 expects the SPL to be
encapsulated differently: instead of putting the checksum at a fixed
offset in the SPL blob, prepend the blob with a header including the
size and the checksum.

The enhancements include
	- adding a command line option, '--vs' to indicate the need for the
	variable size encapsulation
	- padding the fixed size encapsulated blob with 0xff instead of random
	memory contents
	- do not silently truncate the input file, report error instead
	- no need to explicitly closing files/freeing memory, this all happens
	on exit; removing cleanups it makes code clearer
	- profuse commenting
	- modify Makefile to allow enabling the new feature per board

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-30 16:50:35 +09:00
Rajeshwari Birje
e106bd9b9d Exynos5420: Add base patch for SMDK5420
Adding the base patch for Exynos based SMDK5420.
This shall enable compilation and basic boot support for
SMDK5420.

Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-12-30 16:50:34 +09:00
Marek Vasut
5b5a82eb70 ARM: mxs: tools: Fix errno handling in strtoul() invocation
According to NOTE in strtoul(3), the errno must be zeroed before strtoul()
is called. Zero the errno. The NOTE reads as such:

  Since strtoul() can legitimately return 0 or ULONG_MAX (ULLONG_MAX for
  strtoull()) on both success and failure, the calling program should set
  errno  to  0  before the call, and then determine if an error occurred
  by checking whether errno has a nonzero value after the call.

This issue was detected on Fedora 19 with glibc 2.17 .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
2013-12-17 18:38:43 +01:00
Masahiro Yamada
475c506d08 Makefile, .gitignore: Cleanup non-existing binaries
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-12-16 08:59:43 -05:00
Masahiro Yamada
dd88ab325c Makefile: Move some scripts imported from Linux
We have some scripts imported from Linux Kernel:
setlocalversion, checkstack.pl, checkpatch.pl, cleanpatch

They are located under tools/ directory in U-Boot now.
But they were originally located under scripts/ directory
in Linux Kernel.

This commit moves them to the original location.

It is true that binutils-version.sh and dtc-version.sh
do not originate in Linux Kernel, but they should
be moved by analogy to gcc-version.sh.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-12-13 09:18:45 -05:00