Commit graph

58 commits

Author SHA1 Message Date
Masahiro Yamada
44e32c7144 drivers: usb: convert makefiles to Kbuild style
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-31 13:25:38 -04:00
Troy Kisky
449697f14e usb: udc: add udc.h include file
Move common definitions to udc.h
This allows musb_udc.h to be removed as well.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-10-20 23:46:38 +02:00
Troy Kisky
06d513ecb6 usb: add enum usb_init_type parameter to usb_lowlevel_init
This parameter will later be used to verify OTG ports.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2013-10-20 23:45:26 +02:00
Andrew Murray
99b4eaa68e usb: Prevent using reserved registers on DM36x usb
The musb driver defines and uses MUSB_CSR0_H_DIS_PING, however this
bit is reserved on the DM36x. Thus this patch ensures that the
reserved bit is not accesssed.

It has been observed that some USB devices will fail to enumerate
with errors such as 'error in inquiry' without this patch.

See http://www.ti.com/litv/pdf/sprufh9a for details.

Cc: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Andrew Murray <amurray@embedded-bits.co.uk>
Acked-by: Marek Vasut <marex@denx.de>
2013-10-10 07:58:00 -04:00
Andrew Murray
ddd025bb6e usb: Fix error handling in musb_hcd.c
The wait_until_[rx|tx]ep_ready functions return a u8 to indicate success
containing the value 0, 1 or -1. This patch changes the return type to an
int to accommodate the negative return values.

These functions are used in the file using calls such as if (!wait_until...
Where a -1 is returned it is mishandled and treated as success instead of
a CRC error. This patch addresses this.

Cc: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Andrew Murray <amurray@embedded-bits.co.uk>
Acked-by: Marek Vasut <marex@denx.de>
2013-10-07 07:43:46 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Axel Lin
e31dc61e7d usb: musb: Use ARRAY_SIZE at appropriate places
Signed-off-by: Axel Lin <axel.lin@ingics.com>
2013-06-26 10:26:06 -04:00
Lokesh Vutla
9239f5b625 ARM: OMAP4+: Cleanup header files
After having the u-boot clean up series, there are
many definitions that are unused in header files.
Removing all those unused ones.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2013-06-10 08:43:09 -04:00
Ilya Yanok
c60795f41d usb: use linux/usb/ch9.h instead of usbdescriptors.h
Linux usb/ch9.h seems to have all the same information (and more)
as usbdescriptors.h so use the former instead of the later one.

As a consequense of this change USB_SPEED_* values don't correspond
directly to EHCI speed encoding anymore, I've added necessary
recoding in EHCI driver. Also there is no point to put speed into
pipe anymore so it's removed and a bunch of host drivers fixed to
look at usb_device->speed instead.

Old usbdescriptors.h included is not removed as it seems to be
used by old USB device code.

This makes usb.h and usbdevice.h incompatible. Fortunately the
only place that tries to include both are the old MUSB code and
it needs usb.h only for USB_DMA_MINALIGN used in aligned attribute
on musb_regs structure but this attribute seems to be unneeded
(old MUSB code doesn't support any DMA at all).

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-11-20 00:16:06 +01:00
Pankaj Bharadiya
3f0be8ea92 USB: musb_udc: Make musb_peri_rx_ep check for MUSB_RXCSR_RXPKTRDY
The endpoint rx count register value will be zero if it is read before
receive packet ready bit (PERI_RXCSR:RXPKTRDY) is set.

Check for the receive packet ready bit (PERI_RXCSR:RXPKTRDY) before
reading endpoint rx count register. Proceed with rx count read and
FIFO read only if RXPKTRDY bit is set.

Signed-off-by: Pankaj Bharadiya <pankaj.bharadiya@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
2012-10-23 08:33:17 -07:00
Lucas Stach
c7e3b2b586 usb: lowlevel interface change to support multiple controllers
Carry an index in the lowlevel usb functions to make specify the
respective usb controller.

Also pass through an controller struct from lowlevel_init to the
creation of the root usb device of this controller.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2012-10-15 11:54:00 -07:00
Wolfgang Denk
7cdcaef0b2 Merge branch 'master' of git://git.denx.de/u-boot-usb
* 'master' of git://git.denx.de/u-boot-usb:
  MUSB driver: Timeout is never detected as the while loop does not end
  usb: fix ulpi_set_vbus prototype
  pxa25x: Add UDC registers definitions
  USB: Fix strict aliasing in ohci-hcd
  usb: Optimize USB storage read/write
  ehci: Optimize qTD allocations
  usb_stor_BBB_transport: Do not delay when not required
  usb_storage: Remove EHCI constraints
  usb_storage: Restore non-EHCI support
  ehci-hcd: Boost transfer speed
  ehci: cosmetic: Define used constants
  ehci: Fail for multi-transaction interrupt transfers
  arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS
  arm:trats: Support for USB UDC driver at TRATS board.
  dfu:cmd: Support for DFU u-boot command
  dfu: MMC specific routines for DFU operation
  dfu: DFU backend implementation
  dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
  dfu:usb: Support for g_dnl composite download gadget.
  ehci: cosmetic: Define the number of qt_buffers

Signed-off-by: Wolfgang Denk <wd@denx.de>
2012-09-02 16:38:48 +02:00
Matej Frančeškin
8c86501819 MUSB driver: Timeout is never detected as the while loop does not end
Timeout variable is decremented once more when while condition is not met.
Following "if" does not detect correctly that timeout has occurred.
Because of this bug the "usb start" command on AM335X-EVM board did not detect correctly that USB device was not attached.

	timeout = musb_cfg.timeout;
	while (timeout--)
		if (readb(&musbr->devctl) & MUSB_DEVCTL_HM)
 			break;
	/* if musb core is not in host mode, then return */
	if (!timeout)
		return -1;

Signed-off-by: Matej Franceskin <Matej.Franceskin@comtrade.com>
CC: Marek Vasut <matex@denx.de>?
2012-09-01 16:21:53 +02:00
Sughosh Ganu
25f8bf6eff da8xx/hawkboard: Add support for ohci host controller
Also enable the ohci port on hawkboard. These additions result in an
increased u-boot size -- adjust the same accordingly in the board's
config.

Move the usb header for da8xx platforms under arch-davinci.

Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
2012-09-01 14:58:19 +02:00
Tom Rini
71c5de4f4a ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
The USB spec says that 32 bytes is the minimum required alignment.
However on some platforms we have a larger minimum requirement for cache
coherency.  In those cases, use that value rather than the USB spec
minimum.  We add a cpp check to <usb.h> to define USB_DMA_MINALIGN and
make use of it in ehci-hcd.c and musb_core.h.  We cannot use MAX() here
as we are not allowed to have tests inside of align(...).

Signed-off-by: Tom Rini <trini@ti.com>
[marek.vasut]: introduce some crazy macro voodoo
Signed-off-by: Marek Vasut <marex@denx.de>
[ilya.yanok]: moved external buffer fixes to separate patch,
we use {ALLOC,DEFINE}_ALIGN_BUFFER macros with alignment of USB_DMA_MINALIGN
for qh_list, qh and qtd structures to make sure they are proper aligned
for both controller and cache operations.
Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
2012-07-18 14:43:29 +02:00
Mike Frysinger
b974308105 usb: musb: fix printf warning
musb_hcd.c: In function 'musb_submit_rh_msg':
musb_hcd.c:827:2: warning: format '%d' expects type 'int',
	but argument 3 has type 'long unsigned int'

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-19 00:08:16 +01:00
amartin@nvidia.com
f9636e8d38 USB: move keyboard polling into kbd driver
This moves keyboard polling logic from USB HCD drivers into USB
keyboard driver.  Remove usb_event_poll() as keyboard polling was
the only user of this API.  With this patch USB keyboard works with
EHCI controllers again.  Tested on a tegra2 seaboard.

Signed-off-by: Allen Martin <amartin@nvidia.com>
2012-03-03 16:56:29 +01:00
Anatolij Gustschin
c594a8de4e drivers/usb/musb/musb_udc.c: Fix GCC 4.6 warning
Fix:
musb_udc.c: In function 'musb_peri_softconnect':
musb_udc.c:166:14: warning: variable 'intrtx' set but not used
[-Wunused-but-set-variable]
musb_udc.c:166:6: warning: variable 'intrrx' set but not used
[-Wunused-but-set-variable]
musb_udc.c:165:5: warning: variable 'intrusb' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Acked-by: Remy Bohmer <linux@bohmer.net>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
2011-12-09 10:36:33 +01:00
Anatolij Gustschin
94191960cb drivers/usb/musb/musb_hcd.c: Fix GCC 4.6 warning
Fix:
musb_hcd.c: In function 'submit_control_msg':
musb_hcd.c:851:6: warning: variable 'csr' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-23 08:14:27 +01:00
Heiko Schocher
1fa892c67b arm, usb, davinci: make USBPHY_CTL register configurable
Define CONFIG_DV_USBPHY_CTL for setting the USB PHY control
register.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Remy Bohmer <linux@bohmer.net>
cc: Sandeep Paulraj <s-paulraj@ti.com>
cc: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-03 22:56:24 +01:00
Heiko Schocher
4ebe208097 usb, davinci: add enable_vbus() weak function
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-11-03 22:56:24 +01:00
Laurence Withers
0bf98f1d13 DaVinci: rename gpio_defs.h to gpio.h
In preparation for a generic GPIO driver for the DA8xx processors,
rename <asm/arch/gpio_defs.h> to <asm/arch/gpio.h> and fix up all files
which include it.

Signed-off-by: Laurence Withers <lwithers@guralp.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-08-03 12:49:19 +02:00
Cliff Cai
b17ce92a42 musb: process control messages after roothub accepted it
When dealing with non-multipoint devices, if the software root hub code
accepted the message, then we still need to process it normally.  So only
return quickly when the root hub skipped the message or is otherwise in
an error state.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-25 09:53:10 +02:00
Mike Frysinger
081b59e453 usb: musb: blackfin: check anomaly workarounds at runtime too
The anomaly workarounds we need for older silicon might break things
if used on newer versions where the anomalies don't exist.  So check
the silicon rev at runtime too.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-02 09:38:24 +02:00
Mike Frysinger
38e0745e4d usb: musb: blackfin: make clkin configurable
Not everyone has a 24MHz clkin to the USB, so let board porters override.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-02 09:38:24 +02:00
Sebastien Carlier
6d8962e814 Switch from archive libraries to partial linking
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
2010-11-17 21:02:18 +01:00
Mike Frysinger
0228348e9c usb: musb: constify a bit
These ep and root hub structures need not be writable.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 21:41:46 +02:00
Bryan Wu
4ee691f6ac usb: musb: only write CLRDATATOG when appropriate
This is a change similar to what is already in the Linux driver.  We
should only program the CLRDATATOG bit when the current mode indicates
that it is needed.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-13 12:08:43 +02:00
Mike Frysinger
70fccb3f24 usb: musb: stub out MUSB_TXCSR_MODE for Blackfin parts
The MUSB_TXCSR_MODE register setting isn't supported on Blackfin musb
parts, so stub it out to 0.  This matches Linux behavior.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-20 21:56:42 +02:00
Bryan Wu
93ceb4790d usb: musb: set target address for non-multipoint devices
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-11 09:49:22 +02:00
Bryan Wu
8dd7a23007 usb: musb: setup TXCOUNT for Blackfin musb
The Blackfin implementation of musb has a TXCOUNT register that needs to
be programmed when transmitting data.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-11 09:49:21 +02:00
Ajay Kumar Gupta
5689f4b5b4 musb: am35x: Workaround for fifo read issue
AM35x supports only 32bit read operations so we need to have
workaround for 8bit and 16bit read operations.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
2010-08-12 16:40:00 +02:00
Ajay Kumar Gupta
dbea324200 musb: MSC host support for AM35x
Tested MSC Host on AM3517EVM.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
2010-08-12 16:40:00 +02:00
Steve Sakoman
9b16757758 ARMV7: Restructure omap3 musb driver to allow code sharing between OMAP3 and OMAP4
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-08-05 10:11:34 -04:00
Ajay Kumar Gupta
900c0c6b0a musb: fix compilation warning
Fixes below compilation warning
omap3.c: In function 'musb_platform_init':
omap3.c:123: warning: implicit declaration of function
			'omap3_evm_need_extvbus'

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-07-15 16:11:01 -04:00
Ajay Kumar Gupta
944a4894c0 musb: Program extvbus for OMAP3EVM Rev >= E
OMAP3EVM Rev >=E uses external Vbus supply so setting 'extvbus'
to '1' for OMAP3EVM Rev >=E runtime based on EVM revision.

CC: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
2010-06-30 21:37:37 +02:00
Ajay Kumar Gupta
9bb47abf0d musb: Add Phy programming for using external Vbus
MUSB PHY on OMAP3EVM Rev >= E uses external Vbus supply to support
500mA of power.We need to program MUSB PHY to use external Vbus
for this purpose.

Adding 'extvbus' member in musb_config structure which should be set
by all the boards where MUSB interface is using external Vbus supply.

Also added ULPI bus control register read/write abstraction for
Blackfin processor as it doesn't have ULPI registers.

CC: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-06-30 21:37:37 +02:00
Ajay Kumar Gupta
bbf4c01efc musb: Use name based initialization for musb_config
Changed musb_config initialization for omap3.c, davinci.c
and da8xx.c using name of structure fields. This would cause
the uninitialized field to be null by default and thus would
help in avoiding to init some flags required to be set only
for a few selected platforms.

CC: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
2010-06-30 21:37:37 +02:00
Wolfgang Denk
93910edb59 Prepare v2010.03-rc1
Coding style cleanup, update CHANGELOG.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-03-12 23:06:04 +01:00
Prathap Srinivas
6e20e64f5c musb: Add host support for DM365 EVM
Add support for musb host on DM365 EVM.

Signed-off-by: Prathap Srinivas <msprathap@ti.com>
2010-02-03 22:06:59 +01:00
Cliff Cai
ec2aadb408 usb: musb: fix Blackfin DMA register padding
The conversion from offsets to C structs lost a little padding in the DMA
register map.  Accessing endpoints other than ep0 with DMA would fail as
the addresses wouldn't be adjusted correctly.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-02-03 22:06:59 +01:00
Peter Tyser
64917ca389 PCIe, USB: Replace 'end point' references with 'endpoint'
When referring to PCIe and USB 'endpoint' is the standard naming
convention.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Remy Bohmer <linux@bohmer.net>
2010-01-17 23:06:44 +01:00
Bryan Wu
321790f61b usb: musb: add virtual root hub control support
For MUSB devices that do not support multipoint (hubs), we have to emulate
a root hub so that we can support core operations like resetting ports.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-12 20:11:27 +01:00
Sanjeev Premi
b301be0599 omap3: fix compile warning
This patch fixes this warning during compile:

omap3.c: In function 'musb_platform_init':
omap3.c:126: warning: label 'end' defined but not used

Problem reported by: Dirk Behme[dirk.behme@googlemail.com]

Signed-off-by: Sanjeev Premi <premi@ti.com>
2010-01-09 10:25:09 +01:00
Bryan Wu
e608f221c1 usb: musb: add support for Blackfin MUSB
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2010-01-09 10:25:09 +01:00
Bryan Wu
bc72a919e0 usb: musb: change rxcsr register from write to read/modify/write
The RX Control/Status register has bits that we want to preserve, so don't
just write out a single bit.  Preserve the others bits in the process.

The original code posted to the u-boot list had this behavior, but looks
like it was lost somewhere along the way to merging.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2010-01-09 10:25:09 +01:00
Bryan Wu
8868fd443b usb: musb: make multipoint optional
The multipoint handling under MUSB is optional, and some parts (like the
Blackfin processor) do not implement support for it.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2010-01-09 10:25:08 +01:00
Bryan Wu
df402ba381 usb: musb: make fifo support configurable
The dynamic FIFO handling under MUSB is optional, and some parts (like
the Blackfin processor) do not implement support for it.

Due to this, the FIFO reading/writing steps need special handling, so
mark the common versions weak so drivers can override.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2010-01-09 10:25:08 +01:00
Mike Frysinger
dc2cd05c91 usb: musb: make sure the register layout is packed
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2010-01-09 10:25:08 +01:00
Ajay Kumar Gupta
7359273d94 DA8xx: Add MUSB host support
Tested USB host functionality on DA830 EVM.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
2010-01-09 10:25:07 +01:00