Commit graph

80 commits

Author SHA1 Message Date
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Dirk Eibach
b8eee4354f Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM
MAKEALL is fine for ppc4xx and mpc85xx.
Run checks were done on our controlcenterd hardware.

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-07-16 17:44:30 -05:00
Simon Glass
7af26b1669 blackfin: x86: bootm: Handle PREP stage of bootm
The OS function is now always called with the PREP stage. Adjust the
remaining bootm OS functions to deal with this correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-07-12 10:32:39 -04:00
Simon Glass
d8819f94d5 x86: Support tracing function
Some changes are needed to x86 timer functions to support tracing. Add
these so that the feature works correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-26 10:18:56 -04:00
Simon Glass
bdc7d5cda3 x86: Correct missing local variable in bootm
Enabling FIT produces a compile error. Fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-06-26 10:16:41 -04:00
Simon Glass
d0b6f247a1 x86: Re-enable PCAT timer 2 for beeping
While we don't want PCAT timers for timing, we want timer 2 so that we can
still make a beep. Re-purpose the PCAT driver for this, and enable it in
coreboot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13 13:33:21 -07:00
Simon Glass
f9083bbe78 x86: Remove ISR timer
This is no longer used since we prefer the more accurate TSC timer, so
remove the dead code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13 13:33:21 -07:00
Simon Glass
e761ecdbb8 x86: Add TSC timer
This timer runs at a rate that can be calculated, well over 100MHz. It is
ideal for accurate timing and does not need interrupt servicing.

Tidy up some old broken and unneeded implementations at the same time.

To provide a consistent view of boot time, we use the same time
base as coreboot. Use the base timestamp supplied by coreboot
as U-Boot's base time.

Signed-off-by: Simon Glass <sjg@chromium.org>base
Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13 13:33:21 -07:00
Simon Glass
7949703a95 x86: Rationalise kernel booting logic and bootstage
The 'Starting linux' message appears twice in the code, but both call
through the same place. Unify these and add calls to bootstage to
mark the occasion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Michael Spang <spang@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13 13:33:20 -07:00
Simon Glass
7282d834cd x86: Declare global_data pointer when it is used
Several files use the global_data pointer without declaring it. This works
because the declaration is currently a NOP. But still it is better to
fix this so that x86 lines up with other archs.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-05-13 13:33:20 -07:00
Simon Glass
fa790fa0a9 x86: Remove legacy board init code
Since we use CONFIG_SYS_GENERIC_BOARD on x86, we don't need this anymore.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13 13:33:20 -07:00
Simon Glass
dfdedd9c2e x86: Remove unused bios/pci code
Graeme Russ pointed out that this code is no longer used. Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-05-13 13:31:18 -07:00
Andreas Bießmann
d2eae43ba8 lib: consolidate hang()
Delete all occurrences of hang() and provide a generic function.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
[trini: Modify check around puts() in hang.c slightly]
Signed-off-by: Tom Rini <trini@ti.com>
2013-05-01 16:41:08 -04:00
Simon Glass
192868b061 x86: Move PCI init before SPI init
It is possible that our PCI bus will provide the SPI controller, so change
the init order to make this work.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-19 08:45:37 -07:00
Simon Glass
e424c15c1f x86: Enable generic board support
This enables generic board support so that x86 boards can define
CONFIG_SYS_GENERIC_BOARD.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15 16:14:00 -04:00
Simon Glass
86cfb6bdec x86: Use sections header to obtain link symbols
These are defined in asm-generic/sections.h, so remove them from
architecture-specific files.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-15 16:14:00 -04:00
Simon Glass
1938f4a5b6 Introduce generic pre-relocation board_f.c
This file handles common pre-relocation init for boards which use
the generic framework.

It starts up the console, DRAM, performs relocation and then jumps
to post-relocation init.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Wolfgang Denk <wd@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
2013-03-15 16:13:59 -04:00
Simon Glass
62f7970a5a x86: Add error checking to x86 relocation code
This does not actually change normal behaviour, but adds a check that
should detect corruption of relocation data (e.g. by using BSS data
prior to relocation).

Also add additional debugging output when enabled.

During this investigation, two situations have been seen:
1. calculate_relocation_address():
	uintptr_t size = (uintptr_t)&__bss_end - (uintptr_t)&__text_start;

turns into
     111166f:	b8 83 c4 17 01       	mov    $0x117c483,%eax

whih is beyond the end of bss:

0117b484 g       .bss	00000000 __bss_end

Somehow the __bss_end here is 255 bytes ahead.

2. do_elf_reloc_fixups():

	uintptr_t size = (uintptr_t)&__bss_end - (uintptr_t)&__text_start;

Here the __text_start is 0 in the file:

 1111d9f:	bb a0 e0 13 01       	mov    $0x113e0a0,%ebx
1111da4:	81 ef 00 00 00 00    	sub    $0x0,%edi

As it happens, both of these are in pre-relocation code.

For these reasons we silent check and ignore bad relocations.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-04 15:57:48 -08:00
Simon Glass
f697d528ca x86: Support relocation of FDT on start-up
With CONFIG_OF_CONTROL we may have an FDT in the BSS region. Relocate
it up with the rest of U-Boot to keep the rest of memory free.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-04 15:57:47 -08:00
Simon Glass
4b491b8dde x86: Add an __end symbol to signal the end of the U-Boot binary
With this symbol we can easy append something (e.g. an FDT) to the U-Boot
binary and access it from within U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-04 15:57:38 -08:00
Simon Glass
bc2df1afb9 x86: Permit bootstage and timer data to be used prior to relocation
It is useful to be able to access the timer before U-Boot has relocated
so that we can fully support bootstage.

Add new global_data members to support this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-04 15:57:36 -08:00
Simon Glass
5e98947f9b x86: Add function to get top of usable ram
The memory layout calculations are done in calculate_relocation_address(),
and coreboot has its own version of this function. But in fact all we
really need is to set the top of usable RAM, and then the base version
will work as is.

So instead of allowing the whole calculate_relocation_address() function
to be replaced, create board_get_usable_ram_top() which can be used by
a board to specify the top of the area where U-Boot relocations to.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-04 15:56:46 -08:00
Simon Glass
96dfc0633a x86: Remove unused real mode code
This code is pretty old and we want to support only 32-bit systems now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Graeme Russ <graeme.russ@gmail.com>
2013-02-14 20:19:03 -08:00
Simon Glass
058d59b08d x86: Build vga video code only if CONFIG_VIDEO_VGA is defined
When running from coreboot we don't want this code, so make it
optional.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:44 -08:00
Gabe Black
b208c7f1d0 x86: Add support for CONFIG_OF_CONTROL
Allow a device tree to be provided through the standard mechanisms.

Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:42 -08:00
Stefan Reinauer
05b71646a9 x86: Add CONFIG_DELAY_ENVIRONMENT to delay environment loading
This option delays loading of the environment until later, so that only the
default environment will be available to U-Boot.

This can address the security risk of untrusted data being used during boot.

When CONFIG_DELAY_ENVIRONMENT is defined, it is convenient to have a
run-time way of enabling loadinlg of the environment. Add this to the
fdt as /config/delay-environment.

Note: This patch depends on http://patchwork.ozlabs.org/patch/194342/

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
2012-12-06 14:30:42 -08:00
Gabe Black
d65297b64d x86: Make calculate_relocation_address an overridable function
Different systems may have different mechanisms for picking a suitable place
to relocate U-Boot to.

Signed-off-by: Gabe Black <gabeblack@chromium.org>

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:41 -08:00
Gabe Black
842d33874f x86: Make the upper bound on relocated symbols closed instead of open
This seems to be a bug.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:41 -08:00
Gabe Black
32f98735f9 x86: Reorder x86's post relocation memory layout
This changes the layout in decreasing addresses from:

1. Stack
2. Sections in the image
3. Heap

to

1. Sections in the image
2. Heap
3. Stack

This allows the stack to grow significantly more since it isn't constrained by
the other u-boot areas. More importantly, the generic memory wipe code assumes
that the stack is the lowest addressed area used by the main part of u-boot.
In the original layout, that means that u-boot tramples all over itself. In
the new layout, it works.

Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:41 -08:00
Gabe Black
8313315b9a x86: Initialise SPI if enabled
If we have SPI support, make sure that we init it.

Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Vic Yang <victoryang@chromium.org>
2012-12-06 14:30:41 -08:00
Gabe Black
ac31a7b81c x86: Implement arch_phys_memset so that it can wipe memory above 4GB
Implement arch_phys_memset so that it can set memory at physical addresses
above 4GB using PAE paging. Because there are only 5 page tables in PAE mode,
1 PDPT and 4 PDTs, those tables are statically allocated in the BSS. The
tables must be 4K page aligned and are declared that way, and because U-Boot
starts as 4K aligned and the relocation code relocates it to a 4K aligned
address, the tables work as intended.

While paging is turned on, all 4GB are identity mapped except for one 2MB
page which is used as the window into high memory. This way, U-Boot will
continue to work as expected when running code that expects to access memory
freely, but the code can still get at high memory through its window.

The window is put at 2MB so that it's 2MB page aligned, low in memory to be
out of the way of things U-Boot is likely to care about, and above the lowest
1MB where lots of random things live.

Signed-off-by: Gabe Black <gabeblack@chromium.org>

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:41 -08:00
Duncan Laurie
0c3929092d x86: Fix off-by-one error in do_elf_reloc_fixups()
The use of post-increment with a do-while loop results in
the loop going one step too far when handling relocation fixups.

In about 1/100 cases this would cause it to hang.

Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:40 -08:00
Simon Glass
1484311286 x86: Fix indirect jmp warning in zimage.c
This fixes the following warning:

zimage.c:312: Warning: indirect jmp without `*'

Also fixed these warnings to keep checkpatch quiet:

warning: arch/x86/lib/zimage.c,311: unnecessary whitespace before a quoted newline
warning: arch/x86/lib/zimage.c,312: unnecessary whitespace before a quoted newline
warning: arch/x86/lib/zimage.c,313: unnecessary whitespace before a quoted newline

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:40 -08:00
Stefan Reinauer
61e0ea900a x86: Provide a function to clean up just before booting a zimage
This function can be used by boards which want to do some clean-up
before booting a zImage.

Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:39 -08:00
Vadim Bendebury
3cdc18a8de x86: Add a CBMEM timestamp generated right before the kernel startup.
To maintain the initialization state of the timestamp facility, thesq
pointer to the CBMEM section containing the timestamp table should be
kept in the .data section (so that it is maintained across u-boot
relocation).

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:39 -08:00
Vadim Bendebury
2f899e03a9 x86: Add function to read time stamp counter
Put this function in the u-boot-x86.h header file. We could instead create
timer.h perhaps.

We support setting a base time, and reading the time relative to this base.

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:38 -08:00
Stefan Reinauer
5b1be1bd01 x86: Fix typo in pcat_timer.c
Fix a small comment typo.

Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30 13:44:05 -08:00
Gabe Black
5b5ece9ef4 x86: Allow compiling out realmode/bios code
We don't want this for coreboot, so provide a way of compiling it out.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-30 13:44:04 -08:00
Graeme Russ
c73c6de60c x86: Remove duplicate PCI init
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28 11:40:03 -08:00
Graeme Russ
8d61625d6a x86: Put global data on the stack
Putting global data on the stack simplifies the init process (and makes it
slightly quicker). During the 'flash' stage of the init sequence, global
data is in the CAR stack. After SDRAM is initialised, global data is copied
from CAR to the SDRAM stack

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2012-11-28 11:40:03 -08:00
Graeme Russ
e4fb611649 x86: Forward declare gd_t
So it can be used as a type in struct global_data and remove an ugly typecast

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2012-11-28 11:40:03 -08:00
Marek Vasut
036036d79c serial: Remove CONFIG_SERIAL_MULTI from remaining sources
Remove the parts depending either on disabled CONFIG_SERIAL_MULTI
or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI
is now enabled by default.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
2012-10-15 11:53:59 -07:00
Mike Frysinger
de30122bb5 net: move bootfile init into eth_initialize
All arches init this the same way, so move the logic into the core
net code to avoid duplicating it everywhere else.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-15 17:32:33 -05:00
Mike Frysinger
50a47d0523 net: punt bd->bi_ip_addr
This field gets read in one place (by "bdinfo"), and we can replace
that with getenv("ipaddr").  After all, the bi_ip_addr field is kept
up-to-date implicitly with the value of the ipaddr env var.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-15 17:32:05 -05:00
Graeme Russ
a1d57b7aba x86: Convert board_init_f_r to a processing loop
Create an init function array for board_init_f_r - This finalises the
migration to a purely array based initialisation mechanism

Also tweak a few comments while we are at it so everything is 'correct'

--
Changes for v2:
 - Renamed to a more apt name
 - Fix bug in set_reloc_flag_r
 - Re-instate gd->flags = boot_flags; in board_init_f
 - Added commit message
2012-01-04 22:53:14 +11:00
Graeme Russ
d47ab0ecde x86: Split init functions out of board.c
This patch moves towards reducing board.c to simply a set of init cores for
the three initialisation phases (Flash, Flash/RAM, and RAM), a set of three
init function arrays and a init function array processing function
2012-01-04 22:41:32 +11:00
Graeme Russ
b156ff09aa x86: Move relocation code out of board.c 2012-01-04 22:39:06 +11:00
Graeme Russ
8e18e6e173 x86: Move setup_pcat_compatibility() out of board.c
This function simply does not belong in board.c

--
Changes for v2:
 - Added commit message
2012-01-04 22:37:20 +11:00
Graeme Russ
d13640b7c4 x86: Move do_go_exec() out of board.c
--
Changes for v2:
 - None
2012-01-04 22:35:20 +11:00
Graeme Russ
b843f31193 CHECKPATCH: arch/x86/lib/* 2012-01-04 22:33:59 +11:00