Commit graph

17 commits

Author SHA1 Message Date
Michal Simek
b72894f14d ARM64: zynqmp: Add support for standard distro boot commands
Nand and QSPI are not defined now but this will be extended.
Based on selected bootmode boot_targets are rewritten.
Patch also contains detection if variables are saved. If yes don't
rewrite boot_targets variable.

Also move variable setup to the end of file because SCSI needs to be
defined before others macros are using it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
2016-06-06 11:23:28 +02:00
Michal Simek
58ed7f6693 ARM64: zynqmp: Use i2c cadence DM driver
Use i2c cadence DM driver for all zynqmp targets except ZCU102
because I2C muxes and PCA953x are not supported in the tree yet.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2016-04-13 18:29:07 +02:00
Siva Durga Prasad Paladugu
407b76f970 ARM64: zynqmp: Move kernel and fdt offsets and sizes to board config file
Move kernel and fdt offsets and sizes to board config file
as the flash size varies across boards

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:02 +02:00
Michal Simek
8d59d7f63b ARM64: zynqmp: Read RAM information from DT
Read information about memory from DT. This patch simplify life with
synchronization between DT and board files.

dram_init() only needs maximum RAM size below 4GB that's why please sort
banks in memory node.
dram_init_banksize() copies memory setup to bi_dram[].
This will avoid reading information from DT twice.

Memory test start/end were changed to DDR location to let memtest still
compiled.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-04 20:28:38 +02:00
Michal Simek
ce0335f2b4 mmc: Kconfig: Add Arasan SDHCI entry
Add Arasan SDHCI entry to Kconfig and fix all references.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22 16:21:02 +01:00
Michal Simek
713b616459 ARM64: zynqmp: Setup correct COUNTER_FREQUENCY for silicon
When U-Boot runs from EL3 system timer is setup based on this macro.
Software default freq for silicon is 100MHz but enable opton to rewrite
it. Emulation platform is using 4MHz.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:57 +01:00
Michal Simek
99cb9ce029 ARM64: zynqmp: Move memory setup to board file
Setup memory size for ep108 in ep108 config file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:57 +01:00
Michal Simek
d041e3e157 ARM64: zynqmp: Remove incorrect link to common config file
Link to zynqmp common file is incorrect. Fix it by removing the whole
link because it is visible from the file where to look at it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:56 +01:00
Siva Durga Prasad Paladugu
c061d5b3dd ARM64: zynqmp: ep: Define minimum sdhci frequency for ep
Define minimum sdhci frequency for ep, as not defining
it causes the divisor to be 2048 as per sd version but
keeping clock very low on ep causes command failures.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:55 +01:00
Tom Rini
dcf4cb068e Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze 2015-12-07 08:13:02 -05:00
Michal Simek
596e5782e7 net: gem: Move gem to Kconfig
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-12-07 10:14:28 +01:00
Siva Durga Prasad Paladugu
f4dd69ca82 usb: zynqmp: Add XHCI driver support
Added USB XHCI driver support for zynqmp.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2015-12-07 00:14:59 +01:00
Michal Simek
f3bd72801a zynq: sdhci: Define max clock by macro
zc1571 with silicon can operate on 200MHz maximum frequency. Setup this
frequency by default and fix setting for ep108.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-19 14:03:05 +01:00
Simon Glass
42800ffa79 arm: zynq: Move serial driver to driver model
Update this driver to use driver model and change all users.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:53 +01:00
Michal Simek
bb446b7a98 ARM: zynqmp_ep: Enable ethernet for EP
Enable gem0 and setup phy addr for EP.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:26:23 +02:00
Michal Simek
6fe6f13509 ARM: zynqmp: Wire up SATA for the board
Enable SATA for the ZynqMP targets.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:27 +02:00
Siva Durga Prasad Paladugu
0b54a9dd09 zynqmp: Define ep config for ZynqMP
Define a new config "zynqmp_ep" for ZynqMP instead
of xilinx_zynqmp. This defconfig supports all emulation
platforms of ZynqMP. Also renamed TARGET_XILINX_ZYNQMP
to ARCH_ZYNQMP.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:19 +02:00