Commit graph

16 commits

Author SHA1 Message Date
Pavel Machek
2a72dcce24 ext4load: fix help text
Fix ext4load help text.

Signed-off-by: Pavel Machek <pavel@denx.de>
2014-08-09 11:17:03 -04:00
Stephen Warren
cf6598193a fs: implement size/fatsize/ext4size
These commands may be used to determine the size of a file without
actually reading the whole file content into memory. This may be used
to determine if the file will fit into the memory buffer that will
contain it. In particular, the DFU code will use it for this purpose
in the next commit.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09 11:16:57 -04:00
Wolfgang Denk
f7740f7712 EXT4: Fix number base handling of "ext4write" command
Unlike other commands (for example, "fatwrite"), ext4write would
interpret the "sizebytes" as decimal number.  This is not only
inconsistend and unexpected to most users, it also breaks usage
like this:

	tftp ${addr} ${name}
	ext4write mmc 0:2 ${addr} ${filename} ${filesize}

Change this to use the standard notation of base 16 input format.
See also commit b770e88

WARNING: this is a change to the user interface!!

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Uma Shankar <uma.shankar@samsung.com>
Cc: Stephen Warren <swarren@nvidia.com>
2014-02-19 10:47:36 -05:00
Wolfgang Denk
b770e88a6c Fix number base handling of "load" command
As documented, almost all U-Boot commands expect numbers to be entered
in hexadecimal input format. (Exception: for historical reasons, the
"sleep" command takes its argument in decimal input format.)

This rule was broken for the "load" command; for details please see
especially commits 045fa1e "fs: add filesystem switch libary,
implement ls and fsload commands" and 3f83c87 "fs: fix number base
behaviour change in fatload/ext*load".  In the result, the load
command would always require an explicit "0x" prefix for regular
(i. e. base 16 formatted) input.

Change this to use the standard notation of base 16 input format.
While strictly speaking this is a change of the user interface, we
hope that it will not cause trouble.  Stephen Warren comments (see
[1]):

        I suppose you can change the behaviour if you want; anyone
        writing "0x..." for their values presumably won't be
        affected, and if people really do assume all values in U-Boot
        are in hex, presumably nobody currently relies upon using
        non-prefixed values with the generic load command, since it
        doesn't work like that right now.

[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/171172

Acked-by: Tom Rini <trini@ti.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-10-07 15:54:18 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Tom Rini
0171d52c41 cmd_ext4: BREAK and correct ext4write parameter order
The ext4write command was taking the in-memory address and filename path
in reverse order from the rest of the filesystem read and write
commands.  This corrects the order to be the same as fatload, etc.

Signed-off-by: Tom Rini <trini@ti.com>
2013-03-27 15:30:11 -04:00
Stephen Warren
f9b55e2285 fs: rename fsload command to load
When the generic filesystem load command "fsload" was written, I felt
that "load" was too generic of a name for it, since many other similar
commands already existed. However, it turns out that there is already
an "fsload" command, so that name cannot be used. Rename the new
"fsload" to plain "load" to avoid the conflict. At least anyone who's
used a Basic interpreter should feel familiar with the name!

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-04 11:00:34 -07:00
Stephen Warren
3f83c87ee5 fs: fix number base behaviour change in fatload/ext*load
Commit 045fa1e "fs: add filesystem switch libary, implement ls and
fsload commands" unified the implementation of fatload and ext*load
with the new command fsload. However, this altered the interpretation
of command-line numbers from always being base-16, to requiring a "0x"
prefix for base-16 numbers. Enhance do_fsload() to allow commands to
specify which base to use.

Use base 0, thus requiring a "0x" prefix for the new fsload command.
This feels much cleaner than assuming base 16.

Use base 16 for the pre-existing fatload and ext*load to prevent a
change in behaviour.

Use base 16 exclusively for the loadaddr environment variable, since
that variable is interpreted in multiple places, so we don't want the
behaviour to change.

Update command help text to make it clear where numbers are assumed to
be hex, and where an explicit "0x" prefix is required.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2012-11-04 11:00:31 -07:00
Stephen Warren
b6a3044436 cmd_ext4: remove TABs from command help text
TABs in the help text won't line up in the same place on the console as
in a source editor. Replace them with spaces to make ensuring correct
alignment easier.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2012-11-04 11:00:27 -07:00
Simon Glass
b9dc49412d ext4: Fix printf() format string error
Fix the following error in the ext4 command:

cmd_ext4.c:110:3: error: format '%lu' expects argument of type
'long unsigned int', but argument 4 has type 'int' [-Werror=format]

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-29 14:21:20 -07:00
Stephen Warren
045fa1e114 fs: add filesystem switch libary, implement ls and fsload commands
Implement "ls" and "fsload" commands that act like {fat,ext2}{ls,load},
and transparently handle either file-system. This scheme could easily be
extended to other filesystem types; I only didn't do it for zfs because
I don't have any filesystems of that type to test with.

Replace the implementation of {fat,ext[24]}{ls,load} with this new code
too.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-29 14:21:20 -07:00
Stephen Warren
10a37fd7a4 disk: get_device_and_partition() "auto" partition and cleanup
Rework get_device_and_partition() to:
a) Implement a new partition ID of "auto", which requests that U-Boot
   search for the first "bootable" partition, and fall back to the first
   valid partition if none is found. This way, users don't need to
   specify an explicit partition in their commands.
b) Make use of get_device().
c) Add parameter to indicate whether returning a whole device is
   acceptable, or whether a partition is mandatory.
d) Make error-checking of the user's device-/partition-specification
   more complete. In particular, if strtoul() doesn't convert all
   characters, it's an error rather than just ignored.

The resultant device/partition returned by the function will be as
follows, based on whether the disk has a partition table (ptable) or not,
and whether the calling command allows the whole device to be returned
or not.

(D and P are integers, P >= 1)

D
D:
  No ptable:
    !allow_whole_dev: error
    allow_whole_dev: device D
  ptable:
    device D partition 1
D:0
  !allow_whole_dev: error
  allow_whole_dev: device D
D:P
  No ptable: error
  ptable: device D partition P
D:auto
  No ptable:
    !allow_whole_dev: error
    allow_whole_dev: device D
  ptable:
    first partition in device D with bootable flag set.
    If none, first valid paratition in device D.

Note: In order to review this patch, it's probably easiest to simply
look at the file contents post-application, rather than reading the
patch itself.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
[swarren: Rob implemented scanning for bootable partitions. I fixed a
couple of issues there, switched the syntax to ":auto", added the
error-checking rework, and ":0" syntax for the whole device]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-25 14:58:48 -07:00
Rob Herring
81180819b8 cmd_extX: use common get_device_and_partition function
Convert ext2/4 load, ls, and write functions to use common device and
partition parsing function. With the common function "dev:part" can come
from the environment and a '-' can be used in that case.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-09-25 14:46:55 -07:00
Rob Herring
9450106296 ext4: remove init_fs/deinit_fs
There's no real need to expose this and it can be removed by using a static
allocation.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-09-25 14:46:35 -07:00
Uma Shankar
ed34f34dba ext4fs write support
Signed-off-by: Uma Shankar <uma.shankar@samsung.com>
Signed-off-by: Manjunatha C Achar <a.manjunatha@samsung.com>
Signed-off-by: Iqbal Shareef <iqbal.ams@samsung.com>
Signed-off-by: Hakgoo Lee <goodguy.lee@samsung.com>
2012-08-09 23:48:02 +02:00
Uma Shankar
a1596438a6 ext4fs ls load support
Signed-off-by: Uma Shankar <uma.shankar@samsung.com>
Signed-off-by: Manjunatha C Achar <a.manjunatha@samsung.com>
Signed-off-by: Iqbal Shareef <iqbal.ams@samsung.com>
Signed-off-by: Hakgoo Lee <goodguy.lee@samsung.com>
2012-08-09 23:47:43 +02:00