Commit graph

18 commits

Author SHA1 Message Date
Peter Tyser
0d595f76bc fsl_dma: Break out common memory initialization function
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-01 23:12:01 -05:00
Peter Tyser
79f4333ceb 8xxx: Move dma_init() call to common code
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-01 23:12:00 -05:00
Peter Tyser
7892f619d4 8xxx: Rename dma_xfer() to dmacpy()
Also update dmacpy()'s argument order to match memcpy's and use
phys_addr_t/phy_size_t for address/size arguments

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-01 23:07:47 -05:00
Wolfgang Denk
1fbcbe9a95 85xx: Fix compile breakage with sbc8540 and sbc8560
This fixes an error which raises just a warning:
sbc8560.c:250: warning: passing argument 2 of 'strmhz' makes integer from pointer without a cast

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-01-28 23:10:32 +01:00
Wolfgang Denk
8ed44d91c8 Cleanup: fix "MHz" spelling
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-21 11:25:39 +02:00
Wolfgang Denk
08ef89ecd1 Use strmhz() to format clock frequencies
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-10-21 11:25:38 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Kumar Gala
8e55313b7a FSL DDR: Convert SBC8560 to new DDR code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 11:43:52 -05:00
Paul Gortmaker
d04e76edf9 sbc8560: add in ft_board_setup()
Add in for the sbc8560, the ft_board_setup() routine, based on what is
in use for the Freescale MPC8560ADS board.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2008-07-14 19:53:39 -05:00
Paul Gortmaker
0ec436d2f9 sbc8560: properly set cs0_bnds for 512MB
The sbc8560 board ships with 512MB of memory installed,
but the current cs0_bnds is hard coded for 256MB.  Set the
value based on CFG_SDRAM_SIZE.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2008-07-14 19:35:03 -05:00
Becky Bruce
9973e3c614 Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 08:50:18 +02:00
Jon Loeliger
a30a549a35 Remove erroneous or extra spd.h #includers.
Many of the spd.h #includers don't need it,
and wanted to have spd_sdram() declared instead.
Since they didn't get that, some also had open
coded extern declarations of it instead or as well.
Fix it all up by using spd_sdram.h where needed.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-05 00:17:43 +01:00
Kumar Gala
04db400892 Stop using immap_t on 85xx
In the future the offsets to various blocks may not be in same location.
Move to using CFG_MPC85xx_*_ADDR as the base of the registers
instead of getting it via &immap.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:20 -06:00
Kumar Gala
f59b55a5b8 Stop using immap_t for guts offset on 85xx
In the future the offsets to various blocks may not be in same location.
Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
instead of getting it via &immap->im_gur.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-11 22:34:19 -06:00
Marian Balakowicz
63ff004c4f Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
wdenk
c15f3120ec * Patch by Michael Bendzick, 30 Aug 2004:
- Improve platform.S code for omap1510inn that detects whether code
    is running from SDRAM or not. Patch allows SDRAM to be configured
    if code is running out of SRAM at 0x20000000.

* Patch by Frederick Klatt, 30 Aug 2004:
  Add support for the Wind River SBC8540/SBC8560 boards
2004-10-10 22:44:24 +00:00
wdenk
281e00a3be * Code cleanup
* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)
2004-08-01 22:48:16 +00:00
wdenk
8b07a1103d * Patch by Fred Klatt, 25 Jun 2004:
Add support for WindRiver's SBC8560 board

* Patch by Nicolas Lacressonniere, 24 Jun 2004
  Small Bugs fixes for "at91rm9200dk" board:
  - Timing modifications for SPI DataFlash access
  - Fix NAND flash detection bug

* Patch by Nicolas Lacressonniere, 24 Jun 2004:
  Add Support for Flash AT49BV6416 for AT91RM9200DK board
2004-07-10 21:45:47 +00:00