Commit graph

30933 commits

Author SHA1 Message Date
Stefan Roese
2cc1aa2e00 block: ahci: Don't enable port interrupts
This patch changes the initialization of the AHCI controller to not
enable the default interrupts (DEF_PORT_IRQ). As interrupts are
not used in U-Boot in general, this should not break the common AHCI
driver operation.

This change is needed to support the Marvell Armada 38x AHCI
controller. With interrupts enabled, this results in timeouts in
ahci_device_data_io(). Not enabling these interrupts fixes this
problem and the common AHCI driver works fine.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10 14:55:25 +02:00
Stefan Roese
e80f1e85d6 arm: mvebu: db-88f6820-gp: Add MMC/SDIO support
This patch adds MMC/SDIO support to the Marvell DB-88F6820-GP board
configuration. Including support for the common partitions and
filesystems.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10 14:54:12 +02:00
Stefan Roese
7f1adcd74f arm: mvebu: Add SDIO/SDHCI support for Armada A38x
Armada A38x implements an SDHCI compatible SDIO controller. This patch
enables the Marvell driver to support this SoC. And enables the
SDIO controller if selected by the board configuration.

Tested on Marvell DB-88F6820-GP board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10 14:54:09 +02:00
Stefan Roese
492d3223b0 mmc: sdhci.c: Add config option to use a fixed buffer for transfers
While implementing SDIO/MMC SPL booting for the Marvell Armada 38x, the
following problem occured. The SPL runs in internal SRAM which is
the L2 cache locked to memory. When the MMC buffers now are located
on the stack (or bss), the SDIO controller (SDHCI) can't write into
this L2 cache memory.

This patch introduces a method to use a fixed buffer that will be
used for all transfers by defining CONFIG_FIXED_SDHCI_ALIGNED_BUFFER.
This way, the board can use this buffer address located in SDRAM
for all transfers. This solves this SPL problem on the A38x and
should only be used in the SPL U-Boot version.

Tested for SPL booting on Marvell Armada 38x DB-88F6820-GP board.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10 14:54:05 +02:00
Stefan Roese
29905a451b mmc: sdhci: Use timer based timeout detection in sdhci_send_command()
The loop counter based timeout detection does not work on the Armada
38x based board (DB-88F6820-GP). At least with dcache enabled a
timeout is detected. Without dcache enabled, the timeout does not
occur. Increasing the loop counter solves this issue. But a better
solution is to use a timer based timeout detection instead. This
patch now implements this timer based detection.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2015-07-10 14:54:00 +02:00
Stefan Roese
fca6105200 arm: mvebu: db-88f6820-gp: Add MAINTAINERS file
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2015-07-10 14:51:31 +02:00
Bin Meng
f3edfd3054 net: designware: Program MAC address to hardware after soft reset
commit f566c99 "net: Update hardware MAC address if it changes in env"
removes writing MAC address to designware controller after soft reset.
This makes designware ethernet port fail to work. Actually the MAC
address should always be programmed after soft reset.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-07-08 13:43:19 -04:00
Hans de Goede
8fa2e20913 sunxi: Adjust Ippo_q8h_v1_2_a33_1024x600 dts filename to match the upstream kernel
sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts has been merged into the upstream
Linux kernel as sun8i-a33-ippo-q8h-v1.2.dts, adjust u-boot to follow.

Note we've never shipped a final u-boot version with the old name, so this
is safe todo.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-08 16:21:27 +02:00
Mugunthan V N
0a888f584c ARM: DRA72x: fix io delay calibration for ethernet
we currently use in-development IODelay values for DRA72x which are
proposed in the data sheet, however, DRA72x EVM uses DP83865 ethernet
Phy over RGMII. The PHY characteristics and routing choices made on
the EVM, make the current iodelay values fail ethernet communication.

Instead, we need to choose custom values for DRA72x-evm specifically
designed for the PHY and routing on the platform for ethernet to
function.

Cc: Nishanth Menon <nm@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2015-07-07 20:15:52 -04:00
Tom Rini
3cbb15d04f Merge branch 'master' of git://git.denx.de/u-boot-arm 2015-07-07 08:42:35 -04:00
Yegor Yefremov
abe8f9a934 board: baltos - add maintainer information
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2015-07-07 11:39:55 +02:00
Masahiro Yamada
64b77ed234 ARM: disable HAVE_PRIVATE_LIBGCC for ARM64
We have not supported the private library for ARM 64bit.
Prohibit ARM64 boards from enabling it until we make things ready.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-07-07 11:39:51 +02:00
Lokesh Vutla
1c94578e7a board: am43xx: Add maintainer information
am43xx_evm_ethboot/usbhost_boot_defconfig entries are
missing in MAINTAINER file. Adding entries for them.

Reported-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-07-07 11:39:45 +02:00
Albert ARIBAUD \(3ADEV\)
4c3832cc95 cairo: add missing MAINTAINERS file
This removes the following two warnings from buildman:

	WARNING: no status info for 'cairo'
	WARNING: no maintainers for 'cairo'

Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2015-07-07 11:39:41 +02:00
Siva Durga Prasad Paladugu
e05412f5ec arm: dcc: Add uart dcc support for armv8
Added UART DCC support for armv8

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-07-07 11:39:39 +02:00
Simon Glass
b69969be5d Revert "break build if it would produce broken binary"
The root cause of this problem should now be fixed.

This reverts commit a6a4c542d3.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Pavel Machek <pavel@denx.de>
Tested-by: Pavel Machek <pavel@denx.de>
2015-07-07 11:39:36 +02:00
Simon Glass
1251d51ca5 arm: Add ENTRY/ENDPROC to private libgcc functions
When CONFIG_SYS_THUMB_BUILD is defined these functions may be called from
Thumb code. Add the required ENTRY and ENDPROC bracketing so that BLX is
used to call these ARM functions, instead of plain BL, which will fail.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Pavel Machek <pavel@denx.de>
2015-07-07 11:39:22 +02:00
Albert ARIBAUD
6f43ba70d1 Merge branch 'u-boot/master' into 'u-boot-arm/master' 2015-07-07 11:38:44 +02:00
Pavel Machek
003b09dad4 armv7: better comment in start.S
Fix big/small letters in comment.

Signed-off-by: Pavel Machek <pavel@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
2015-07-07 08:04:03 +02:00
Axel Lin
1f9e5e228c gpio: lpc32xx: Use priv_data instead of platdata
The LPC32XX GPIO driver platdata currently contains GPIO state information,
which should go into priv_data. Thus rename lpc32xx_gpio_platdata to
lpc32xx_gpio_priv and convert to use dev_get_priv() instead.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
2015-07-07 08:03:56 +02:00
Tom Rini
37f4d0ec34 Merge branch 'master' of http://git.denx.de/u-boot-sunxi 2015-07-05 21:22:22 -04:00
Chen-Yu Tsai
4e87398fcc sunxi: Add Sinlinx SinA33 defconfig
Sinlinx SinA33 is a core/daughter board SDK kit from Sinlinx. It has
the A33 SoC, USB host, USB OTG, audio input/output, LCD, camera, SDIO
and GPIO headers.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-05 11:32:11 +02:00
Chen-Yu Tsai
d8656b6297 sunxi: Sync sun8i dts files with the linux kernel
Copy over all the latest dts changes from mripard/sunxi/dt-for-4.2.
This adds a dts file for Sinlinx SinA33 dev board, and the required
changes in the .dtsi files.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-05 11:32:11 +02:00
Chen-Yu Tsai
e506889c96 sunxi: Add support for UART0 in PB pin group on A33
The A33 adds a pinmux function for UART0 in the PB pin group.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-05 11:32:11 +02:00
Chen-Yu Tsai
dec7c84227 sunxi: rsb: Enable R_PIO clock before configuring external pins
The original code was configuring the external pins after enabling
the R_PIO clock, which meant the configuration never made it to
the pin controller the first time in SPL.

Why this was working before is uncertain. Maybe the state was left
from a previous boot sequence, or RSB just happened to be the default
configuration. However with some A33 chips, SPL failed to configure
the PMIC. This was seen by me and Maxime on the Sinlinx SinA33 dev
board.

Reordering the calls fixed this.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-05 11:32:11 +02:00
Chen-Yu Tsai
6ad8c74300 sunxi: hardware-feature-specific function index defines for PORT F UART0
Commit 487b327 ("sunxi: GPIO pin mux hardware-feature-specific function
index defines") renamed all GPIO index defines, but missed the PORT F
UART0 setup functions.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-07-05 11:32:11 +02:00
Tom Rini
808bf7cf65 Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Conflicts:
	configs/tbs2910_defconfig
	configs/tqma6q_mba6_mmc_defconfig
	configs/tqma6q_mba6_spi_defconfig
	configs/tqma6s_mba6_mmc_defconfig
	configs/tqma6s_mba6_spi_defconfig
	include/configs/mx6_common.h

Signed-off-by: Tom Rini <trini@konsulko.com>
2015-07-03 08:41:02 -04:00
Sanchayan Maity
aa5a0d9894 colibri_vf: Increase console IO buffer size to 1024
Increase console IO buffer size to 1024 from the previous value of 256.
The previous value was too short for editing environment variables like
ubiboot from the console.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
2015-07-03 09:38:10 +02:00
Tom Rini
891b487098 Merge branch 'master' of git://git.denx.de/u-boot-spi 2015-07-01 15:38:12 -04:00
Tom Rini
6762ae6888 Merge branch 'master' of git://git.denx.de/u-boot-uniphier 2015-07-01 15:37:56 -04:00
Angelo Dureghello
8aa5f1d971 spi: cf_qspi: fix clamp macro type check compilation warnings
Fix compilation warnings for redefined 'clamp' macro and non-uniform
clamp macro types.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
2015-07-01 22:58:50 +05:30
Jagan Teki
23cbd16db6 README: Remove CONFIG_SPI_FLASH_DATAFLASH help text
Since the help text is added in drivers/mtd/spi/Kconfig

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01 21:39:06 +05:30
Jagan Teki
afdfe387cd README: Remove CONFIG_SPI_FLASH_BAR help text
Since the help text is added in drivers/mtd/spi/Kconfig

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01 21:39:06 +05:30
Jagan Teki
84d31b3b8f sf: Kconfig: Add SPI_FLASH_BAR entry
Added SPI_FLASH_BAR entry on Kconfig with help description

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01 21:39:06 +05:30
Jagan Teki
9cb528de48 defconfig: Move CONFIG_SPI_FLASH_BAR from configs
This commit moves:
- CONFIG_SPI_FLASH_BAR

from include/configs/*.h into configs/*_defconfigs

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01 21:39:06 +05:30
Jagan Teki
0c79bde479 README: Remove CONFIG_SPI_FLASH_MTD help text
Since the help text is added in drivers/mtd/spi/Kconfig

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01 21:39:05 +05:30
Jagan Teki
4495830c58 spi: Kconfig: Add TEGRA20_SLINK entry
Added TEGRA20_SLINK entry on Kconfig with help description.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
2015-07-01 21:39:05 +05:30
Jagan Teki
2f3e6f8cc1 spi: Kconfig: Add TEGRA20_SFLASH entry
Added TEGRA20_SFLASH entry on Kconfig with help description.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
2015-07-01 21:39:05 +05:30
Jagan Teki
5bf9a2d3dd spi: Kconfig: Add TEGRA114_SPI entry
Added TEGRA114_SPI entry on Kconfig with help description.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
2015-07-01 21:39:05 +05:30
Jagan Teki
456360102c spi: Kconfig: Add ICH_SPI entry
Added ICH_SPI entry on Kconfig with help description.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-01 21:39:05 +05:30
Jagan Teki
c354eee8d0 spi: Kconfig: Add EXYNOS_SPI entry
Added EXYNOS_SPI entry on Kconfig with help description.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-07-01 21:39:05 +05:30
Jagan Teki
91c22d046c spi: Kconfig: Add FSL_QSPI entry
Added FSL_QSPI entry on Kconfig with help description.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Peng Fan <Peng.Fan@freescale.com>
Cc: Haikun Wang <haikun.wang@freescale.com>
2015-07-01 21:39:04 +05:30
Jagan Teki
3debffa704 spi: Kconfig: Add FSL_ESPI entry
Added FSL_ESPI entry on Kconfig with help description.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Haikun Wang <haikun.wang@freescale.com>
2015-07-01 21:39:04 +05:30
Jagan Teki
94ea308d75 spi: Kconfig: Add FSL_DSPI entry
Added FSL_DSPI entry on Kconfig with help description.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Haikun Wang <haikun.wang@freescale.com>
2015-07-01 21:39:04 +05:30
Jagan Teki
e4976af865 spi: Kconfig: Show dm-spi drivers if DM_SPI set
DM supported spi drivers are enbled only when DM_SPI enabled,
so added DM_SPI if condition in Kconfig to show thoese only
when it enabled.

Also re-order the config items as incresing alphabetic order.

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01 21:39:04 +05:30
Jagan Teki
1360004233 spi: Makefile: Use object file alphabetic order
Use object files as incresing alphabetic order, so-that it's
easy for readability.

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01 21:39:04 +05:30
Jagan Teki
f924a20908 spi: Kconfig: Add TI_QSPI entry
Added TI_QSPI entry on Kconfig with help description.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-07-01 21:39:04 +05:30
Jagan Teki
075143d3cf spi: Kconfig: Add XILINX_SPI entry
Added XILINX_SPI entry on Kconfig with help description.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Michal Simek <michal.simek@xilinx.com>
2015-07-01 21:39:03 +05:30
Jagan Teki
de8230535b spi: Add Kconfig menu entry
Added Kconfig menu ... endmenu enties for spi support.

Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-07-01 21:39:03 +05:30
Masahiro Yamada
8101b98298 ARM: UniPhier: add IDs for PH1-Pro5, ProXstream2, PH1-LD6b
This prepares for new SoCs support.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-07-02 01:07:25 +09:00