Commit graph

41 commits

Author SHA1 Message Date
Adrian Alonso
0782a8803d imx: tools: imximage: fix CLR bit command
Fix incorrect parametr in CMD_CHECK_BITS_CLR command
Pass CLR parameter to DCD header for CMD_CHECK_BITS_CLR

Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
2016-05-17 17:52:19 +02:00
Troy Kisky
61903b759a imximage: fix commands other than write_data
When CHECK_BITS_SET was added, they forgot to add
a new command table, and instead overwrote the
previous table.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-10-07 13:43:15 +02:00
Troy Kisky
835c30e368 imximage: header.length of 4 is valid
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2015-10-07 13:24:35 +02:00
Baruch Siach
b893c9898c tools/imximage: set DCD pointer to NULL when its length is 0
When dcd_len is 0 the Write Data command that the set_dcd_rst_v2() routine
generates is empty. This causes HAB to complain that the command is invalid.

--------- HAB Event 1 -----------------
event data:
	0xdb 0x00 0x0c 0x41 0x33 0x06 0xc0 0x00
	0xcc 0x00 0x04 0x04

To fix this set the DCD pointer in the IVT to NULL in this case. The DCD header
itself is still needed for detect_imximage_version() to determine the image
version.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-09-02 15:25:27 +02:00
Adrian Alonso
0b7f7c339c imx: imximage: add new CHECK/CLR BIT command
* Extend imximage DCD version 2 to support DCD commands
  CMD_WRITE_CLR_BIT 4 [address] [mask bit] means:
    while ((*address & ~mask) != 0);
  CMD_CHECK_BITS_SET 4 [address] [mask bit] means:
    while ((*address & mask) != mask);
  CMD_CHECK_BITS_CLR 4 [address] [mask bit] means:
    *address = *address & ~mask;
* Add set_dcd_param_v2 helper function to set DCD
  command parameters

Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-07-26 12:07:14 +02:00
Tom Rini
307367eaff Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-02-10 10:40:43 -05:00
Ye.Li
9598f8c30c imx: imximage: Add QuadSPI boot support
Add QuadSPI boot support to imximage tool.

Note: The QuadSPI configuration parameters at offset 0x400 are not
included in this patch. Need other tools to generate the parameters
part.

Signed-off-by: Ye.Li <B37916@freescale.com>
2015-02-10 12:48:49 +01:00
Guilherme Maciel Ferreira
a93648d197 imagetool: replace image registration function by linker_lists feature
The registration was introduced in commit f86ed6a8d5

This commit also removes all registration functions, and the member "next"
from image_type_params struct

Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
2015-01-29 13:38:41 -05:00
Ye.Li
de97980478 imximage: Fix the bootdata.size calculation
In system boot chapter of i.MX6 reference manual, the "Image Vector Table"
figure shows the bootdata.start points to the beginning of the destination
memory. It means the bootdata.size should contain the IVT offset part,
but the calculation in imximage tool does not have.

We found this issue when booting from QuadSPI NOR on i.MX6SX. The u-boot
runs into abnormal (crash or stop) after booting. After checked the destination
memory where the image is loaded to, there are hundreds of bytes at
the image end are not loaded into memory. Since there is a 4096 bytes
round in the calculation, for the booting devices using smaller IVT offset,
such as SD and SPI booting, they are not easy to reproduce.

Signed-off-by: Ye.Li <B37916@freescale.com>
2014-11-03 10:33:01 +01:00
Ye.Li
03ea24b2a9 imximage: Fix imximage IVT bug for EIM-NOR boot
The load region size of EIM-NOR are defined to 0. For this case,
the parameter "imximage_init_loadsize" must be calculated.
The imximage tool implements the calculation in the "imximage_generate"
function, but the following function "imximage_set_header" resets the value
and not calculate. This bug cause some fields of IVT head are not
correct, for example the boot_data and DCD overlay the application area.

Signed-off-by: Ye.Li <B37916@freescale.com>
2014-09-09 16:39:02 +02:00
Guilherme Maciel Ferreira
f86ed6a8d5 tools: moved code common to all image tools to a separated module.
In order to avoid duplicating code and keep only one point of modification,
the functions, structs and defines useful for "dumpimage" were moved from
"mkimage" to a common module called "imagetool".

This modification also weakens the coupling between image types (FIT, IMX, MXS,
and so on) and image tools (mkimage and dumpimage). Any tool may initialize the
"imagetool" through register_image_tool() function, while the image types
register themselves within an image tool using the register_image_type()
function:

                                                      +---------------+
                                               +------|   fit_image   |
 +--------------+          +-----------+       |      +---------------+
 |    mkimage   |--------> |           | <-----+
 +--------------+          |           |              +---------------+
                           | imagetool | <------------|    imximage   |
 +--------------+          |           |              +---------------+
 |  dumpimage   |--------> |           | <-----+
 +--------------+          +-----------+       |      +---------------+
                                               +------| default_image |
                                                      +---------------+

          register_image_tool()           register_image_type()

Also, the struct "mkimage_params" was renamed to "image_tool_params" to make
clear its general purpose.

Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2013-12-13 09:15:32 -05:00
Wolfgang Denk
3765b3e7bd Coding Style cleanup: remove trailing white space
Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-10-14 16:06:53 -04:00
York Sun
72048bc3f1 tools/imximage.c: Fix compiling warning
Convert set_hdr_func(struct imx_header *imxhdr) to set_hdr_func(void)
to get rid of the warning

warning: ‘imxhdr’ is used uninitialized in this function

Signed-off-by: York Sun <yorksun@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2013-09-27 13:53:35 +02:00
Albert ARIBAUD
19d829fa60 Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Conflicts:
	drivers/serial/serial.c

The conflict above was a trivial case of adding one init
function in each branch, and manually resolved in merge.
2013-09-05 11:15:26 +02:00
Stefano Babic
0187c985aa tools: add support for setting the CSF into imximage
Add support for setting the CSF (Command Sequence File) pointer
which is used for HAB (High Assurance Boot) in the imximage by
adding e.g.

CSF 0x2000

in the imximage.cfg file.

This will set the CSF pointer accordingly just after the padded
data image area. The boot_data.length is adjusted with the
value from the imximage.cfg config file.

The resulting u-boot.imx can be signed with the FSL HAB tooling.
The generated CSF block needs to be appended to the u-boot.imx.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-08-31 15:06:29 +02:00
Stefano Babic
01390aff25 tools: add padding of data image file for imximage
Implement function vrec_header to be able to pad the final
data image file according the what has been calculated for
boot_data.length.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-08-31 15:06:29 +02:00
Stefano Babic
377e367a85 tools: dynamically allocate imx_header in imximage
Change to dynamically allocate the imx_header to correctly
allocate the IVT, Boot Data and DCD at correct locations
depending on the boot media.

Also check that the Image Vector Table Offset + IVT +
Boot Data + DCD <= Initial Load Region Size.

Previously struct imx_header was always 4096 bytes and was
not dealing correctly with the Image Vector Table Offset.

Now, the memory allocation looks for e.g. SD boot like this

 Storage   u-boot.imx                             RAM
 Device

 00000000                                         177ff000 <--------------
                                                                         |
 00000400  00000000  d1 00 20 40 IVT.header       177ff400 <-------      |
 00000404  00000004  00 00 80 17 IVT.entry        177ff404 -----------   |
 00000408  00000008  00 00 00 00 IVT.reserved1    177ff408        |  |   |
 0000040C  0000000C  2c f4 7f 17 IVT.dcd          177ff40C ------ |  |   |
 00000410  00000010  20 f4 7f 17 IVT.boot         177ff410 ---- | |  |   |
 00000414  00000014  00 f4 7f 17 IVT.self         177ff414 --------  |   |
 00000418  00000018  00 00 00 00 IVT.csf          177ff418    | |    |   |
 0000041C  0000001C  00 00 00 00 IVT.reserved2    177ff41C    | |    |   |
 00000420  00000020  00 f0 7f 17 BootData.start   177ff420 <--- |    | ---
 00000424  00000024  00 60 03 00 BootData.length  177ff424      |    |
 00000428  00000028  00 00 00 00 BootData.plugin  177ff428      |    |
 0000042C  0000002C  d2 03 30 40 DCD.header       177ff42C <-----    |
 ...                                                                 |
 00001000  00000c00  13 00 00 ea U-Boot Start     17800000 <----------

While at it also remove the unused #define HEADER_OFFSET.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-08-31 15:06:28 +02:00
Stefano Babic
3150f92c29 tools: rename mximage_flash_offset to imximage_ivt_offset
This better reflects the naming from the Reference Manual
as well as fits better since "flash" is not really applicabe
for SATA.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-08-31 15:06:28 +02:00
Stefano Babic
4655d40f34 tools: imx_header should not include flash_offset
Doing a  make distclean; make mx6qsabresd_config; make
and      hexdump -C u-boot.imx | less

 ...
 00000360  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
 *
 000003f0  00 00 00 00 00 00 00 00  00 00 00 00 00 04 00 00  |................|
                                                ^^^^^^^^^^^
 00000400  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
 *
 00001000  13 00 00 ea 14 f0 9f e5  14 f0 9f e5 14 f0 9f e5  |...ê.ð.å.ð.å.ð.å|
 ...

shows the flash_offset value being written into the final
generated image, wich is not correct.

Instead create flash_offset as static variable such that the
generated image is "clean".

 00000360  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
 *
 00001000  13 00 00 ea 14 f0 9f e5  14 f0 9f e5 14 f0 9f e5  |...ê.ð.å.ð.å.ð.å|

Signed-off-by: Stefano Babic <sbabic@denx.de>
2013-08-31 15:06:28 +02:00
York Sun
2db1c3fc67 tools/Makefile: Move _GNU_SOURCE to Makefile
Commit 669dfc2e adds libfdt_env.h to HOSTCPPFLAGS. It causes stdio.h
to be included before _GNU_SOURCE is defined in C files. On some old hosts
some prototypes are protected by #ifdef __USE_GNU, which is set when
_GNU_SOURCE is defined.

Signed-off-by: York Sun <yorksun@freescale.com>
Acked-by: Simon Glass <sjg@chromium.org>
2013-08-16 13:45:15 -04:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Marek Vasut
895d996676 imx: Align the imximage header and payload to multiples of 4k
The MX53 ROM loads the data from NAND in multiples of pages and
supports maximum page size of 4k. Thus, align the image and header
to 4k to be safe from ROM bugs.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
2013-05-05 17:45:04 +02:00
Marek Vasut
6cb83829a0 tools: arm: imx: Implement BOOT_OFFSET command for imximage
Implement BOOT_OFFSET command for imximage. This command is parallel
to current BOOT_FROM command, but allows more flexibility in configuring
arbitrary image header offset. Also add an imximage.cfg with default
offset values into arm/arch/imx-common/ so the board-specific imximage.cfg
can include this file to avoid magic constants.

The syntax of BOOT_OFFSET command is "BOOT_OFFSET <u32 offset>".

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
2013-04-28 11:18:03 +02:00
Fabio Estevam
6e08385715 tools: imximage: Let .name field be more generic
Since this structure is not i.MX5x specific, remove the '5x' to make it more
generic.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-28 06:49:51 +01:00
Fabio Estevam
1411fb37b5 tools: imximage: Load a size that is multiple of 512
In order to mx53 ROM to properly load the U-boot image, its header size should
be multiple of 512 bytes.

This issue was observed with gcc 4.6.2/4.7.3, which caused data aborts:

U-Boot 2013.01-rc2-00172-gf8cfcf1-dirty (Dec 26 2012 - 13:13:28)

Board: MX53 LOCO
I2C:   ready
DRAM:  1 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
In:    serial
Out:   serial
Err:   serial
CPU:   Freescale i.MX53 family rev2.1 at 1000 MHz
Reset cause: WDOG
Net:   FEC
Warning: FEC using MAC address from net device

Hit any key to stop autoboot:  0
data abort

    MAYBE you should read doc/README.arm-unaligned-accesses

pc : [<aff72220>]          lr : [<aff721fc>]
sp : af565e20  ip : af566918     fp : 00000000
r10: 00000003  r9 : affabb5b     r8 : af565f58
r7 : 00000000  r6 : 36747fff     r5 : af5668e8  r4 : 36747fff
r3 : af5668ec  r2 : af5668eb     r1 : 00000000  r0 : af5668e8
Flags: NzcV  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...

,and this patch fixes it.

Also, even though the ROUND macro is already defined in common.h,
the reason for redefining it in image.h is explained by Stefano Babic:

"I will remark a previous comment - even if including common.h seems a
good idea to avoid duplications, it makes tools like mkimage to depend
on the selected board, because <board>_config must run. Even if this is
not a problem for us u-boot developers, it becomes an issue when these
tools are included in distros (like u-boot-tools in Ubuntu) and cannot
be packaged."

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2013-01-05 18:09:00 +01:00
Troy Kisky
ab857f2613 imximage: make set_imx_hdr_v1/v2 easier to read
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-10-20 17:13:02 +02:00
Troy Kisky
ad0826dcd8 imximage: change parameters to set_imx_hdr
Call with the value the function will use
instead of going through a pointer.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-10-20 17:13:02 +02:00
Troy Kisky
243319825f imximage: delay setting of image size
When later we change to variable length
header, we won't know the file size when
set_imx_hdr is called. So this is prep work.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-10-20 17:13:02 +02:00
Troy Kisky
348ca8efb7 imximage: fix size of image to load.
sbuf->st_size already includes sizeof(struct imx_header),
so remove extra addition.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-10-20 17:13:01 +02:00
Troy Kisky
8d8cc828f4 imximage: move flash_offset check to common location
Both set_imx_hdr_v1 and set_imx_hdr_v2 perform the
same check. Move check to before the set_imx_hdr call.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-10-20 17:13:01 +02:00
Troy Kisky
f14e6258f3 imximage: remove redundant setting of app_dest_ptr
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-10-20 17:13:01 +02:00
Troy Kisky
4d5fa98536 imximage: check dcd_len as entries added
Before the len was checked after the entire file
was processed, so it could have already overflowed.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
2012-10-20 17:13:01 +02:00
Dirk Behme
49d3e27211 imximage: Remove overwriting of flash_offset
The flash header supports different flash offsets for different
boot devices. E.g. parallel NOR or OneNAND use a different offset
than FLASH_OFFSET_STANDARD (== 0x400).

The flash offset is correctly read from the configuration in
parse_cfg_cmd(). But is then overwritten wrongly in set_imx_hdr_v1/2().

Fix this by removing this overwriting. Use the flash offset
correctly read from the configuration, instead.

If there is no flash_offset read from the configuration file, i.e.
the BOOT_FROM tag is missing, exit with an error message.

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
CC: Jason Liu <liu.h.jason@gmail.com>
CC: Stefano Babic <sbabic@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
2012-03-27 09:41:14 +02:00
Dirk Behme
bd25864cc7 imximage: Sort bootops alphabetically
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
CC: Fabio Estevam <festevam@gmail.com>
CC: Stefano Babic <sbabic@denx.de>
CC: Jason Liu <jason.hui@linaro.org>
Acked-by: Jason Liu <jason.hui@linaro.org>
2012-02-12 10:11:25 +01:00
Dirk Behme
19b409c007 imximage: Add support for i.MX6
The i.MX6 processor can boot from NOR flash and SATA disks,
additionally. Add the flash offsets for these additional
boot modes.

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
CC: Stefano Babic <sbabic@denx.de>
CC: Jason Liu <jason.hui@linaro.org>
Acked-by: Jason Liu <jason.hui@linaro.org>
2012-02-12 10:11:25 +01:00
Liu Hui-R64343
8a1edd7d54 imximage: Add MX53 boot image support
This patch add the MX53 boot image support.

This patch has been tested on Freescale MX53EVK board
and MX51EVK board.

Signed-off-by: Jason Liu <r64343@freescale.com>
2011-02-02 00:54:42 +01:00
Stefano Babic
f581e3a215 mkimage: correct spelling error in imximage
Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-04-30 05:23:25 -05:00
Kim Phillips
0ad22703f0 tools: fix imximage warning
Fix build warning:

Configuring for MPC837XEMDS board...
imximage.c: In function `imximage_parse_cfg_file':
imximage.c:146: warning: passing argument 2 of `getline' from incompatible pointer type
/usr/include/bits/stdio.h:116: note: expected `size_t *' but argument is of type `uint32_t *'

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-02-24 00:06:18 +01:00
Stefano Babic
5b28e913f4 mkimage: SEGFAULT with imximage on 64 bit systems
Running mkimage to generate an imximage produces a SEGFAULT
on 64 bit machines due to pointer arithmetic limited to 32 bit.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
2010-02-24 00:04:03 +01:00
Kumar Gala
249d4dec69 Fix compiler warning in imximage.c due to getline prototype
imximage.c: In function 'imximage_parse_cfg_file':
imximage.c:142: warning: implicit declaration of function 'getline'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-27 20:10:01 +01:00
Stefano Babic
8edcde5e4e mkimage: Add Freescale imx Boot Image support (imximage)
This patch adds support for "imximage" (MX Boot Image)
to the mkimage utility. The imximage is used on the Freescales's
MX.25, MX.35 and MX.51 processors.

Further details under doc/README.imximage.

This patch was tested on a Freescale mx51evk board.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-01-25 23:58:29 +01:00