Commit graph

13 commits

Author SHA1 Message Date
Masahiro Yamada
499785b970 ARM: UniPhier: enable Driver Model and UART on SPL
Enable CONFIG_SPL_DM and CONFIG_SPL_SERIAL_SUPPORT, which provide
Driver Model UART support on SPL.

CONFIG_SYS_SPL_MALLOC_{START,SIZE} should be dropped because simple
malloc is preferred on SPL.  Dlmalloc requires some static variables
on .data section that is not available yet for NOR boot mode etc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-03-24 00:15:35 +09:00
Masahiro Yamada
afed8c1b6a ARM: UniPhier: switch to 1CS support card
The 3CS support card (CONFIG_DCC_MICRO_SUPPORT_CARD) used to be used
very often before, but it is recently getting a minority.  Swith to
the 1CS support card (CONFIG_PFC_MICRO_SUPPORT_CARD).

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:03:08 +09:00
Masahiro Yamada
c8bc166124 ARM: UniPhier: update defconfigs using savedefconfig
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:02:20 +09:00
Masahiro Yamada
e02ee2548a kconfig: switch to single .config configuration
When Kconfig for U-boot was examined, one of the biggest issues was
how to support multiple images (Normal, SPL, TPL).  There were
actually two options, "single .config" and "multiple .config".
After some discussions and thought experiments, I chose the latter,
i.e. to create ".config", "spl/.config", "tpl/.config" for Normal,
SPL, TPL, respectively.

It is true that the "multiple .config" strategy provided us the
maximum flexibility and helped to avoid duplicating CONFIGs among
Normal, SPL, TPL, but I have noticed some fatal problems:

[1] It is impossible to share CONFIG options across the images.
  If you change the configuration of Main image, you often have to
  adjust some SPL configurations correspondingly.  Currently, we
  cannot handle the dependencies between them.  It means one of the
  biggest advantages of Kconfig is lost.

[2] It is too painful to change both ".config" and "spl/.config".
  Sunxi guys started to work around this problem by creating a new
  configuration target.  Commit cbdd9a9737 (sunxi: kconfig: Add
  %_felconfig rule to enable FEL build of sunxi platforms.) added
  "make *_felconfig" to enable CONFIG_SPL_FEL on both images.
  Changing the configuration of multiple images in one command is a
  generic demand.  The current implementation cannot propose any
  good solution about this.

[3] Kconfig files are getting ugly and difficult to understand.
  Commit b724bd7d63 (dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to
  Kconfig) has sprinkled "if !SPL_BUILD" over the Kconfig files.

[4] The build system got more complicated than it should be.
  To adjust Linux-originated Kconfig to U-Boot, the helper script
  "scripts/multiconfig.sh" was introduced.  Writing a complicated
  text processor is a shell script sometimes caused problems.

Now I believe the "single .config" will serve us better.  With it,
all the problems above would go away.  Instead, we will have to add
some CONFIG_SPL_* (and CONFIG_TPL_*) options such as CONFIG_SPL_DM,
but we will not have much.  Anyway, this is what we do now in
scripts/Makefile.spl.

I admit my mistake with my apology and this commit switches to the
single .config configuration.

It is not so difficult to do that:

 - Remove unnecessary processings from scripts/multiconfig.sh
  This file will remain for a while to support the current defconfig
  format.  It will be removed after more cleanups are done.

 - Adjust some makefiles and Kconfigs

 - Add some entries to include/config_uncmd_spl.h and the new file
   scripts/Makefile.uncmd_spl.  Some CONFIG options that are not
   supported on SPL must be disabled because one .config is shared
   between SPL and U-Boot proper going forward.  I know this is not
   a beautiful solution and I think we can do better, but let's see
   how much we will have to describe them.

 - update doc/README.kconfig

More cleaning up patches will follow this.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-02-24 17:06:23 -05:00
Masahiro Yamada
3bf447655b ARM: UniPhier: enable I2C for UniPhier SoCs
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:49 -07:00
Masahiro Yamada
992e874885 ARM: UniPhier: select CONFIG_SPL
Now UniPhier platform is only supported with SPL.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-18 23:34:27 +09:00
Masahiro Yamada
3201455d6a ARM: UniPhier: move support card select to Kconfig
There are two kinds of expansion boards which are often used for
the UniPhier platform and they are only exclusively selectable.
It can be better described by the "choice" menu of Kconfig.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-12-08 01:25:44 +09:00
Masahiro Yamada
25e274e202 ARM: UniPhier: move CONFIG_CMD_* and CONFIG_FIT* defines to defconfig
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-28 02:21:02 +09:00
Masahiro Yamada
b5e57fc786 ARM: UniPhier: enable Device Tree control
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-28 02:21:01 +09:00
Masahiro Yamada
495deb44f2 ARM: UniPhier: enable USB features
FAT-formated USB storage device access is available.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-12 00:21:41 +09:00
Masahiro Yamada
ff247b7a0d serial: uniphier: move CONFIG_UNIPHIER_SERIAL to Kconfig
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23 21:43:09 -06:00
Masahiro Yamada
d064cbffff dm: serial: use Driver Model for UniPhier serial driver
This commit converts UniPhier on-chip serial driver to driver model.

Since UniPhier SoCs do not have Device Tree support, some board files
should be added under arch/arm/cpu/armv7/uniphier/ph1-*/ directories.
(Device Tree support for UniPhier platform is still under way.)

Now the base address and master clock frequency are passed from
platform data, so CONFIG_SYS_UNIPHIER_SERIAL_BASE* and
CONFIG_SYS_UNIPHIER_UART_CLK should be removed.

Tested on UniPhier PH1-LD4 ref board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23 21:43:09 -06:00
Masahiro Yamada
66cba041fe ARM: UniPhier: add Kconfig and defconfig
This commit allows to build Panasonic UniPhier family:
PH1-LD4, PH1-Pro4, PH1-sLD8

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-05 14:10:09 +09:00