Commit graph

72 commits

Author SHA1 Message Date
Vignesh R
30e3ea4c79 dfu: dfu_sf: Pass duplicate devstr to parse_dev
parse_dev() alters the string pointed by devstr parameter. Due to this
subsequent parsing of sf entities will fail, as string pointed by devstr
is no longer valid sf dev arguments.
Fix this by passing pointer to the copy of the string to parse_dev
instead of pointer to the actual devstr.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-03 17:29:33 +01:00
Fabio Estevam
2727f3bfba dfu: dfu_sf: Take the start address into account
The dfu_alt_info_spl variable allows passing a starting point
for the binary to be flashed in the SPI NOR.

For example, if we have 'dfu_alt_info_spl=spl raw 0x400', this means
that we want to flash the binary starting at address 0x400.

In order to do so we need to erase the entire sector and write to
the the subsequent SPI NOR sectors taking such start address
into account for the address calculations.

Tested by succesfully writing SPL binary into 0x400 offset and
the u-boot.img at offset 64 kiB of a SPL NOR.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
[trini: Use lldiv for the math]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-10-19 17:05:13 -04:00
Fabio Estevam
f4c9258213 dfu: dfu_sf: Use the erase sector size for erase operations
SPI NOR flashes need to erase the entire sector size and we cannot pass
any arbitrary length for the erase operation.

To illustrate the problem:

Copying data from PC to DFU device
Download    [=========================] 100%       478208 bytes
Download done.
state(7) = dfuMANIFEST, status(0) = No error condition is present
state(10) = dfuERROR, status(14) = Something went wrong, but the
device does not know what it was
Done!

In this case, the binary has 478208 bytes and the M25P32 SPI NOR
has an erase sector of 64kB.

478208  = 7 entire sectors of 64kiB + 19456 bytes.

Erasing the first seven 64 kB sectors works fine, but when trying
to erase the remainding 19456 causes problem and the board hangs.

Fix the issue by always erasing with the erase sector size.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2015-10-19 13:47:06 -04:00
Stephen Warren
411c5e57e8 dfu: mmc: buffer file reads too
When writing to files in a filesystem on MMC, dfu_mmc.c buffers up the
entire file content until the end of the transaction, at which point the
file is written in one go. This allows writing files larger than the USB
transfer size (CONFIG_SYS_DFU_DATA_BUF_SIZE); the maximum written file
size is CONFIG_SYS_DFU_MAX_FILE_SIZE (the size of the temporary buffer).

The current file reading code does not do any buffering, and so limits
the maximum read file size to the USB transfer size. Enhance the code to
do the same kind of buffering as the write path, so the same file size
limits apply.

Remove the size checking code from dfu_read() since all read paths now
support larger files than the USB transfer buffer.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2015-09-11 17:15:23 -04:00
Stephen Warren
806bd245b1 dfu: don't keep freeing/reallocating
DFU currently allocates buffer memory at the start of each data transfer
operation and frees it at the end. Especially since memalign() is used to
allocate the buffer, and various other allocations happen during the
transfer, this can expose the code to heap fragmentation, which prevents
the allocation from succeeding on subsequent transfers.

Fix the code to allocate the buffer once when DFU mode is initialized,
and free the buffer once when DFU mode is exited, to reduce the exposure
to heap fragmentation.

The failure mode is:

// Internally to memalign(), this allocates a lot more than s to guarantee
// that alignment can occur, then returns chunks of memory at the start/
// end of the allocated buffer to the heap.
p = memalign(a, s);
// Various other malloc()s occur here, some of which allocate the RAM
// immediately before/after "p".
//
// DFU transfer is complete, so buffer is released.
free(p);
// By chance, no other malloc()/free() here, in DFU at least.
//
// A new DFU transfer starts, so the buffer is allocated again.
// In theory this should succeed since we just free()d a buffer of the
// same size. However, this fails because memalign() internally attempts
// to allocate much more than "s", yet free(p) above only free()d a
// little more than "s".
p = memalign(a, s);

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
2015-09-11 17:15:23 -04:00
Lukasz Majewski
585a696e4e dfu: tftp: Kconfig: Add Kconfig entry for dfu tftp feature
The dfu tftp feature can be now enabled via Kconfig. This
commit provides necessary code for it.

Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-09-07 13:41:05 +02:00
Lukasz Majewski
2092e46104 dfu: tftp: update: Add dfu_write_from_mem_addr() function
This function allows writing via DFU data stored from fixed buffer address
(like e.g. loadaddr env variable).

Such predefined buffers are used in the update_tftp() code. In fact this
function is a wrapper on the dfu_write() and dfu_flush().

Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-09-07 13:41:04 +02:00
Lukasz Majewski
2d50d68a4c dfu: tftp: update: Provide tftp support for the DFU subsystem
This commit adds initial support for using tftp for downloading and
upgrading firmware on the device.

Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-09-07 13:41:04 +02:00
Lukasz Majewski
a7e6892ffb dfu: Delete superfluous initialization of the dfu_buf_size static variable
After extension of the dfu_get_buf() to also setup (implicitly) the dfu_buf_size
variable it is not needed to set dfu_buf_size to CONFIG_SYS_DFU_DATA_BUF_SIZE.

This variable is set in the dfu_get_buf() by not only considering
CONFIG_SYS_DFU_DATA_BUF but more importantly the "dfu_bufsiz" env variable.
Therefore, dfu_get_buf() should be used for initialization.

Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
Reviewed-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-09-07 13:41:04 +02:00
Stephen Warren
e621c7ab9a dfu: fix 64-bit compile warnings
Use %p to print pointers.

The max value of (i_buf - i_buf_start) should be dfu_buf_size, which is
an unsigned long, so cast the pointer difference to that type to print.

Change-Id: Iee242df9f8eb091aecfe0cea4c282b28b547acfe
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-07-27 15:53:52 -07:00
Paul Kocialkowski
01acd6abbd usb: USB download gadget and functions config options coherent naming
This introduces a coherent scheme for naming USB download gadget and functions
config options. The download USB gadget config option is moved to
CONFIG_USB_GADGET_DOWNLOAD for better consistency with other gadgets and each
function's config option is moved to a CONFIG_USB_FUNCTION_ prefix.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>

Test HW: Odroid_XU3 (Exynos5422), trats (Exynos4210)
2015-07-22 08:57:53 +02:00
Peter Tyser
9ac71f112e dfu: nand: Verify writes
Previously NAND writes were not verified and could fail silently.  Add
a verification step after all writes to NAND.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
2015-03-30 23:24:38 -05:00
Przemyslaw Marczak
41ac233c61 dfu: mmc: file buffer: remove static allocation
For writing files, DFU implementation requires the file buffer
with the len at least of file size. For big files it requires
the same big buffer.

Previously the file buffer was allocated as a static variable,
so it was a part of U-Boot .bss section. For 32MiB len of buffer
we have 32MiB of additional space, required for this section.

The .bss needs to be cleared after the relocation.
This introduces an additional boot delay at every start, but usually
the dfu feature is not required at the standard boot, so the buffer
should be allocated only if required.

This patch removes the static allocation of this buffer,
and alloc it with memalign after first call of function:
- dfu_fill_entity_mmc()
and the buffer is freed on dfu_free_entity() call.

This was tested on Trats2.
A quick test with trace. Boot time from start to main_loop() entry:
- ~888ms - before this change (arch memset enabled for .bss clear)
- ~464ms - after this change

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
2015-03-09 11:13:28 -04:00
Przemyslaw Marczak
899a528215 dfu: samsung: move call to set_dfu_alt_info() to dfu common code
This common call can be used for setting proper entities based
on dfu command arguments.
The config: CONFIG_SET_DFU_ALT_INFO, was used only for few configs,
and now it is common.

The board file should implement:
- set_dfu_alt_info() function

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
[Test HW: Odroid U3 (Exynos 4412)]
2015-02-25 17:47:02 +01:00
Przemyslaw Marczak
f597fc3d4c dfu: dfu_get_buf: check the value of env dfu_bufsiz before use
In function dfu_get_buf(), the size of allocated buffer could
be defined by the env variable. The size from this variable
was passed for memalign() without checking its value.
And the the memalign will return non null pointer for size 0.

This could possibly cause data abort, so now the value of var
is checked before use. And if this variable is set to 0 then
the default size will be used.

This commit also changes the base passed to simple_strtoul()
to 0. Now decimal and hex values can be used for the variable
dfu_bufsiz.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
[TestHW: Exynos4412-Trats2]
2014-12-18 12:26:06 +01:00
Przemyslaw Marczak
7da6fa2716 dfu: mmc: check if mmc device exists in mmc_block_op()
The function mmc_block_op() is the last function before
the physicall data write, but the mmc device pointer is not
checked. If mmc device not exists, then data abort will occur.
To avoid this, first the mmc device pointer is checked.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
[TestHW: Exynos4412-Trats2]
2014-12-18 12:26:06 +01:00
Rob Herring
fe1b28c9f0 usb, g_dnl: generalize DFU detach functions
In order to add detach functions for fastboot, make the DFU detach related
functions common so they can be shared.

Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
[TestHW: Exynos4412-Trats2]
2014-12-18 12:26:05 +01:00
Tom Rini
fc9b0b8043 Merge branch 'master' of git://git.denx.de/u-boot-usb
Conflicts:
	board/freescale/mx6sxsabresd/mx6sxsabresd.c

Signed-off-by: Tom Rini <trini@ti.com>
2014-12-11 18:40:49 -05:00
Masahiro Yamada
b41411954d linux/kernel.h: sync min, max, min3, max3 macros with Linux
U-Boot has never cared about the type when we get max/min of two
values, but Linux Kernel does.  This commit gets min, max, min3, max3
macros synced with the kernel introducing type checks.

Many of references of those macros must be fixed to suppress warnings.
We have two options:
 - Use min, max, min3, max3 only when the arguments have the same type
   (or add casts to the arguments)
 - Use min_t/max_t instead with the appropriate type for the first
   argument

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Pavel Machek <pavel@denx.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
[trini: Fixup arch/blackfin/lib/string.c]
Signed-off-by: Tom Rini <trini@ti.com>
2014-11-23 06:48:30 -05:00
Lukasz Majewski
5610b05789 dfu: thor: fix: Modify dfu_get_alt() function to support absolute paths
Recently the ext4 file system imposed passing absolute path with its file
name parameter.
As a result dfu_alt_info env variable has been modified to provide absolute
path when ext4 file system is accessed (e.g. /uImage ext4 0 2;).

Unfortunately, lthor flashing program provides plain file name (like uImage)
and hence those two file names do not match anymore.

Presented commit also allows lthor to write files to sub directories (like
/boot/bin/uImage).

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
2014-11-14 21:09:06 +01:00
Simon Glass
843c9e8796 dm: Add spi.h header to a few files
Some files are using SPI functions but not explitly including the SPI
header file. Fix this, since driver model needs it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-22 10:36:47 -06:00
Masahiro Yamada
ed36323f6d kconfig: add blank Kconfig files
This would be useful to start moving various config options.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2014-09-24 18:30:28 -04:00
Lukasz Majewski
1cc03c5c53 dfu: Provide means to find difference between dfu-util -e and -R
This commit provides distinction between DFU device detach and reset.
The -R behavior is preserved with proper handling of the dfu-util's -e
switch, which detach the DFU device.

By running dfu-util -e; one can force device to finish the execution of
dfu command on target and execute some other scripted commands.

Moreover, some naming has been changed - the dfu_reset() method now is known
as dfu_detach(). New name better reflects the purpose of the code.

It was also necessary to increase the number of usb_gadget_handle_interrupts()
calls since we also must wait for detection of the USB reset event.

Example usage:
1. -e (detach) switch
 dfu-util -a0 -D file1.bin;dfu-util -a3 -D uImage;dfu-util -e

 access to u-boot prompt.

2. -R (reset) switch
 dfu-util -a0 -D file1.bin;dfu-util -R -a3 -D uImage

 target board reset

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
2014-09-02 14:29:28 +02:00
Stephen Warren
67ab0a5e9f dfu: fix readback buffer overflow test
The buffer is too small if it's < size to read, not if it's <= the size.
This fixes the 1MB test case on Tegra, which has a 1MB buffer.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09 11:17:01 -04:00
Stephen Warren
6f12ebf6ea dfu: add SF backend
This allows SPI Flash to be programmed using DFU.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09 11:16:59 -04:00
Stephen Warren
cb7bd2e07e dfu: add free_entity() to struct dfu_entity
This allows the backend to free any resources allocated during the
relevant dfu_fill_entity_*() call. This will soon be used by the
SF backend.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09 11:16:59 -04:00
Stephen Warren
7ac1b410ac dfu: allow backend to specify a maximum buffer size
CONFIG_SYS_DFU_DATA_BUF_SIZE may be large to allow for FAT/ext layouts
to transfer large files. However, this means that individual write
operations will take a long time. Allow backends to specify a maximum
buffer size, so that each write operation is limited to a smaller data
block. This prevents the DFU protocol from timing out when e.g. writing
to SPI flash. I would guess that NAND might benefit from setting this
value too, but I can't test that.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09 11:16:58 -04:00
Stephen Warren
dd64827eb6 dfu: defer parsing of device string to IO backend
Devices are not all identified by a single integer. To support
this, defer the parsing of the device string to the IO backed, so that
it can apply the appropriate rules.

SPI devices are specified as controller:chip_select. SPI/SF support will
be added soon.

MMC devices can also be specified as controller[.hwpart][:partition] in
many commands, although we don't support that syntax in DFU.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09 11:16:58 -04:00
Stephen Warren
3ee9593fce dfu: add write error handling
Fix calls to dfu_write() and dfu_flush() to detect errors in the I/O
itself. This could happen due to problems with the storage medium, or
simply when trying to write a FAT/ext file that is larger than the buffer
dfu_mmc.c maintains for this purpose.

Signal the error by switching the DFU state/status. This will be picked
up by the DFU client when it sends the next DFU request. Note that errors
can't simply be returned from e.g. dnload_request_complete(), since that
function has no way to pass errors back to the DFU client; a call to
dnload_request_complete() simply means that a USB OUT completed.

This error state/status needs to be cleared when the next DFU client
connects. While there is a DFU_CLRSTATUS request, no DFU client seems to
send this. Hence, clear this when selecting the USB alternate setting on
the USB interface.

Finally, dfu.c relies on a call to dfu_flush() to clear up the internal
state of the write transaction. Now that errors in dfu_write() are
detected, dfu_flush() may no longer be called for every transaction.
Separate out the cleanup code into a new function, and call it whenever
dfu_write() fails, as well as from any call to dfu_flush().

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09 11:16:58 -04:00
Stephen Warren
0e285b503c dfu: fix some issues with reads/uploads
DFU read support appears to rely upon dfu->read_medium() updating the
passed-by-reference len parameter to indicate the remaining size
available for reading.

dfu_read_medium_mmc() never does this, and the implementation of
dfu_read_medium_nand() will only work if called just once; it hard-codes
the value to the total size of the NAND device irrespective of read
offset.

I believe that overloading dfu->read_medium() is confusing. As such,
this patch introduces a new function dfu->get_medium_size() which can
be used to explicitly find out the medium size, and nothing else.
dfu_read() is modified to use this function to set the initial value for
dfu->r_left, rather than attempting to use the side-effects of
dfu->read_medium() for this purpose.

Due to this change, dfu_read() must initially set dfu->b_left to 0, since
no data has been read.

dfu_read_buffer_fill() must also be modified not to adjust dfu->r_left
when simply copying data from dfu->i_buf_start to the upload request
buffer. r_left represents the amount of data left to be read from HW.
That value is not affected by the memcpy(), but only by calls to
dfu->read_medium().

After this change, I can read from either a 4MB or 1.5MB chunk of a 4MB
eMMC boot partion with CONFIG_SYS_DFU_DATA_BUF_SIZE==1MB. Without this
change, attempting to do that would result in DFU read returning no data
at all due to r_left never being set.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-08-09 11:16:58 -04:00
Lukasz Majewski
3d83e6752d dfu: Disable default calculation of CRC32
Patch (SHA1: bd694244db)
dfu: Introduction of the "dfu_hash_algo" env variable for checksum method
setting

already introduced more generic handling of the crc32 calculation.
Up till now the CRC32 of received data was calculated unconditionally.
This patch changes this and from now - by default the crc32 is NOT
calculated anymore.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2014-06-11 02:31:48 +02:00
Lukasz Majewski
bd694244db dfu: Introduction of the "dfu_hash_algo" env variable for checksum method setting
Up till now the CRC32 of received data was calculated unconditionally.
The standard crc32 implementation causes long delay when large images
were uploaded.

The "dfu_hash_algo" environment variable gives the opportunity to
disable on demand the hash (crc32) calculation.
It can be done without the need to recompile the u-boot binary.

By default the crc32 is calculated, which means that legacy behavior
has been preserved.

Tests results:
400 MiB ums.img file
With 		crc32 calculation: 65 sec [avg 6.29 MB/s]
Without 		crc32 calculation: 25 sec [avg 16.17 MB/s]

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Marek Vasut <marex@denx.de>
2014-06-01 19:18:00 +02:00
Lukasz Majewski
c8151b4a5d dfu: mmc: Provide support for eMMC boot partition access
Before this patch it was only possible to access the default eMMC HW
partition. By partition selection I mean the access to eMMC via the
ext_csd[179] register programming.

It sometimes happens that it is necessary to write to other partitions.
This patch adds extra attribute to "raw" sub type of the dfu_alt_info
environment variable (e.g. boot-mmc.bin raw 0x0 0x200 mmcpart 1;)

It saves the original boot value and restores it after storing the file.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2014-05-15 00:24:24 +02:00
Przemyslaw Marczak
1aa4bdc82d drivers:dfu: dfu_flush(): add raw data flush to complete dfu write
Before dfu write and flush operations separation,
dfu write data was flushed by host download request
with len of zero size.

Since above change manually calling dfu write with zero
size has non sense (e.g. in THOR). This should be done by
flush operation.
So now dfu_write_buffer_drain() is called in dfu_flush().
If there is any raw data to flush (like it can be in thor)
then it will be physically written to medium.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Marek Vasut <marex@denx.de>
2014-05-15 00:23:56 +02:00
Heiko Schocher
fc25fa27e5 dfu, nand: add medium specific polltimeout function
add a possibility to add a medium specific polltimeout
function. So it is possible to define different
poll timeouts.

Used on nand medium, for setting the DFU_MANIFEST_POLL_TIMEOUT
only on nand ubi partitions, which is currently the only
usecase.

Change-Id: If1db5f49b32d93fefa7481e8dfe5b7ccc0e65af4
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2014-05-08 10:38:30 +02:00
Mateusz Zalega
b7d4259af2 dfu: mmc: change offset base handling
Previously offsets handled by dfu_fill_entity_mmc(), defined in boards'
CONFIG_DFU_ALT were treated as hexadecimal regardless of their prefix,
which sometimes led to confusion. This patch forces usage of explicit
numerical base prefixes.

Signed-off-by: Mateusz Zalega <m.zalega@samsung.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Tom Rini <trini@ti.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
2014-05-05 08:20:56 +02:00
Mateusz Zalega
711b931f90 dfu: mmc: raw data write fix
When user attempted to perform a raw write using DFU (vide
dfu_fill_entity_mmc) with MMC interface not initialized before,
get_mmc_blk_size() reported invalid (zero) block size - it wasn't
possible to write ie. a new u-boot image.

This commit fixes that by initializing MMC device before use in
dfu_fill_entity_mmc().

While fixing initialization sequence, I had to change about half of
dfu_fill_entity_mmc's body, so I refactored it on the way to make it,
IMHO, considerably more comprehensible.

Being left as dead code, get_mmc_blk_size() was removed.

Tested on Samsung Goni.

Signed-off-by: Mateusz Zalega <m.zalega@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Tom Rini <trini@ti.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
2014-05-05 08:00:28 +02:00
Lukasz Majewski
672ad18c27 dfu:fix: Replace wrong return value with proper one
This patch remove always false (since we tested ret = 0) ternary operator
with ret value returned.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2014-04-30 10:30:57 +02:00
Albert ARIBAUD
519fdde9e6 Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
	arch/arm/cpu/arm926ejs/mxs/Makefile
	include/configs/trats.h
	include/configs/trats2.h
	include/mmc.h
2014-04-08 09:25:08 +02:00
Łukasz Majewski
7d0b605abb dfu: mmc: Replace calls to u-boot commands with native mmc API
For some time we have been using the run_command() with properly crafted
string. Such approach turned to be unreliable and error prone.

Switch to "native" mmc subsystem API would allow better type checking and
shall improve speed.

Also, it seems that this API is changing less often than u-boot commands.
The approach similar to env operations on the eMMC has been reused.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2014-03-23 02:20:10 +01:00
Heiko Schocher
001a831986 usb: dfu: introduce dfuMANIFEST state
on nand flash using ubi, after the download of the new image into
the flash, the "rest" of the nand sectors get erased while flushing
the medium. With current u-boot version dfu-util may show:

Starting download: [##################################################] finished!
state(7) = dfuMANIFEST, status(0) = No error condition is present
unable to read DFU status

as get_status is not answered while erasing sectors, if erasing
needs some time.

So do the following changes to prevent this:

- introduce dfuManifest state
  According to dfu specification
  ( http://www.usb.org/developers/devclass_docs/usbdfu10.pdf ) section 7:
  "the device enters the dfuMANIFEST-SYNC state and awaits the solicitation
   of the status report by the host. Upon receipt of the anticipated
   DFU_GETSTATUS, the device enters the dfuMANIFEST state, where it
   completes its reprogramming operations."

- when stepping into dfuManifest state, sending a PollTimeout
  DFU_MANIFEST_POLL_TIMEOUT in ms, to the host, so the host
  (dfu-util) waits the PollTimeout before sending a get_status again.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-03-23 02:20:09 +01:00
Heiko Schocher
a2199afea1 usb, dfu: extract flush code into seperate function
move the flushing code into an extra function dfu_flush(),
so it can be used from other code.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-03-23 02:20:09 +01:00
Przemyslaw Marczak
b627eb461b usb: dfu: add static alt num count in dfu_config_entities()
Thanks to this multiple call of function dfu_config_entities()
gives continuous dfu alt numbering until call dfu_free_entities().

This allows to store dfu entities in multiple variables.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Łukasz Majewski <l.majewski@samsung.com>
Tested-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-03-13 10:30:56 +09:00
Lukasz Majewski
17eb1d8f57 dfu: mmc: fs: Fix format accepted by ext4write command
The commit:

"EXT4: Fix number base handling of "ext4write" command"
 SHA1: f7740f7712

Cleaned up the ext4write command format.

This commit shall be regarded as a follow up, since the DFU subsystem is
using those commands for its normal operation.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2014-02-20 12:00:27 -05:00
Lukasz Majewski
4fb127898e dfu: Export allocated dfu buffer size
The method for exporting size of allocated buffer is provided.
It is afterwards used by USB's dfu function code.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2013-12-18 19:53:19 +01:00
Bo Shen
47d79deb99 usb: dfu: make nand upload working
Nowhere pass a value to len, which always 0, make no transfer which
cause uploading failed.

This patch make nand upload working. However it needs enough malloc
buffer to store read data, that means the buffer at least equal to
the upload partition size, or else it doesn't work.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2013-11-08 20:46:20 +01:00
Bo Shen
31bae4c5d9 usb: dfu: correct dfu buffer inited value
After dfu buffer is initialized, the buffer should be all available,
while not 0. Initialize its value to min(dfu_buf_size, dfu->r_left).

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2013-11-08 20:46:20 +01:00
Bo Shen
c2617bc773 usb: dfu: decrease dfu->r_left along with the transfer
The value of dfu->r_left need decrease along with the transfer

Signed-off-by: Bo Shen <voice.shen@atmel.com>
2013-11-08 20:46:20 +01:00
Masahiro Yamada
710f1d3d5f drivers: convert makefiles to Kbuild style
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-10-31 13:26:01 -04:00
Lukasz Majewski
d42782631d dfu:core: Export dfu_{get|free}_buf functions
Define the dfu_get_buf() and dfu_free_buf() as global functions.
They are necessary for zero copy buffer management, when DFU backend is
used for storing data.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
2013-10-20 23:42:40 +02:00