Commit Graph

4158 Commits

Author SHA1 Message Date
Roy Zang f6155c6fbb 85xx: Add pci/pcie E1000 ethernet support for MPC8544DS and MPC8536 boards
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-22 09:43:47 -05:00
Kumar Gala 6bb5b41229 85xx: Report which "bank" of NOR flash we are booting from on FSL boards
The p2020DS, MPC8536DS, MPC8572DS, MPC8544DS boards are capable of
swizzling the upper address bits of the NOR flash we boot out of which
creates the concept of "virtual" banks.  This is useful in that we can
flash a test of image of u-boot and reset to one of the virtual banks
while still maintaining a working image in "bank 0".

The PIXIS FPGA exposes registers on LBC which we can use to determine
which "bank" we are booting out of (as well as setting which bank to
boot out of).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-22 09:42:22 -05:00
Kumar Gala 9af9c6bdc1 86xx: Report which "bank" of NOR flash we are booting from on MPC8641HPCN
The MPC8641HPCN board is capable of swizzling the upper address bit of
the NOR flash we boot out of which creates the concept of "virtual"
banks.  This is useful in that we can flash a test of image of u-boot
and reset to one of the virtual banks while still maintaining a
working image in "bank 0".

The PIXIS FPGA exposes registers on LBC which we can use to determine
which "bank" we are booting out of (as well as setting which bank to
boot out of).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-22 09:08:50 -05:00
Luigi 'Comio' Mantellini caf72ff329 Refresh LZMA-lib to v4.65
Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
2009-07-22 09:43:27 +02:00
Wolfgang Denk 70ebf31633 AT91: factor out ROUND() macro
A large number of boards (all AT91 based) duplicated the ROUND()
macro in their board specific config files. Add the definition to
include/common.h and clean up the board config files.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-22 09:30:31 +02:00
Kumar Gala 89188a6233 85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
We have always mapped at least 16M in the kernel and we have seen cases
with new kernel features that a kernel image needs more than 8M of
memory.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-21 09:02:40 -05:00
Heiko Schocher af1d7d984a 83xx, kmeter: fix compile error
CONFIG_SYS_MALLOC_LEN is defined in the board config, and
the keymile-common.h, which collects common options used
by all keymile-boards. This results in a compile error
when compiling the kmeter1 board. So remove this define
in the board config file.

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-07-21 09:22:23 +02:00
Heiko Schocher 39df00d9ae i2c, mpc83xx: add CONFIG_SYS_I2C_INIT_BOARD for fsl_i2c
This patch adds the possibility to call a board specific
i2c bus reset routine for the fsl_i2c bus driver, and adds
this option for the keymile kmeter1 board.

The deblock sequence for this board is implemented and
tested in the following way:

CR = 0x20 (release SDA and SCL pin)
CR = 0xa0 (start read)
dummy read
dummy read
if 2. dummy read == 0x00
	3. dummy read

CR = 0x80 (SDA and SCL now 1 SR = 0x86)
CR = 0x00 (Modul reset SR=0x81)
CR = 0x80 (SDA and SCL = 1, SR = 0x81)

Signed-off-by: Heiko Schocher <hs@denx.de>
2009-07-21 07:06:26 +02:00
Heiko Schocher dc71b248ef powerpc: updates for the keymile boards
- CONFIG_SYS_MAX_I2C_BUS changed to 1
  We use only one I2C hardwarecontroller on this boards, so
  change the CONFIG_SYS_MAX_I2C_BUS to 1.
- common: dont print errormsg if second IVM Block lacks.
- 82xx, mgcoge: fix double mtdpart entry in environment
- 82xx, mgcoge: activate on second Flash the second bank.
- common: CONFIG_ENV_SIZE 0x4000 for all keymile boards
- common: Change malloc size to 1MByte for all Keymile boards
    We need a bigger malloc area for the environment support (128k)
    on some Keymile boards (kmeter1) and the upcoming UBI support.
    Change it to 1MB for all Keymile boards to be on the save side.
    Also define CONFIG_SYS_64BIT_VSPRINTF which is needed for
    UBI/UBIFS support.
- Add UBI support to all Keymile boards
- change manner of writing "/localbus/ranges" node
    instead of writting the complete "/localbus/ranges" node
    before booting Linux, only update the ranges entries
    which gets dynamical detected (size of flashes).
    This is needed, because keymile adds in the DTS
    "/localbus/ranges" node entries, which u-boot must
    not overwrite/delete.
- kmeter, mgcoge: define 2 seperate regions needed for the Intel P30 chips
    The Intel P30 chip has 2 non-identical chips on
    one die, so we need to define 2 seperate regions
    that are scanned by physmap_of independantly.
- kmeter1: Add MTD concat support to Keymile boards
- 82xx, mgcoge: add "unlock=yes" to default environment
- added CONFIG_MTD_DEVICE to get in sync with mainline code

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-21 00:06:11 +02:00
Simon Kagstrom 20938e54a2 Add unaligned.h for arm
This patch adds unaligned.h for ARM (needed to build with LZO
compression). The file is taken from the linux kernel, but includes
u-boot headers instead.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Acked-by: Stefan Roese <sr@denx.de>
2009-07-20 23:54:58 +02:00
Peter Tyser 433ea8abd6 Remove last remanants of unused CONFIG_I2C_CMD_TREE
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-07-20 23:54:57 +02:00
Wolfgang Denk 725e53a70d Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2009-07-20 22:55:29 +02:00
Wolfgang Denk 23b5b1d3e1 Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx 2009-07-20 22:52:31 +02:00
Grzegorz Bernacki a781de1270 digsy mtc: Enable command line history.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2009-07-19 21:43:00 +02:00
Mike Frysinger 3756609076 compiler.h: unify system ifdef cruft here
Shove a lot of the HOSTCC and related #ifdef checking crap into the new
compiler.h header so that we can keep all other headers nice and clean.

Also introduce custom uswap functions so we don't have to rely on the non
standard implementations that a host may (or may not in the case of OS X)
provide.  This allows mkimage to finally build cleanly on an OS X system.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-19 21:41:46 +02:00
Jean-Christophe PLAGNIOL-VILLARD 60a3f404ac malloc.h: protect it against multiple include
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-19 21:34:45 +02:00
Wolfgang Denk 7640f41988 Fix boards broken after removal of legacy NAND and DoC support
Commit 2419169f removed support for legacy NAND and disk on chip but
missed to update the code for a few boards. This patch fixes the
resulting build issues.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-19 19:37:24 +02:00
Simon Kagstrom 8bf29b59fc Add unaligned.h for arm
This patch adds unaligned.h for ARM (needed to build with LZO
compression). The file is taken from the linux kernel, but includes
u-boot headers instead.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Acked-by: Stefan Roese <sr@denx.de>
2009-07-19 11:56:34 +02:00
Kazuaki Ichinohe e405afab1d Canyonlands SATA harddisk driver
This patch adds a SATA harddisk driver for the canyonlands.
This patch is kernel driver's porting.
This patch corresponded to not cmd_scsi but cmd_sata.
This patch divided an unused member with ifndef __U_BOOT__ in the structure.

[environment variable, boot script]
setenv bootargs root=/dev/sda7 rw
setenv bootargs ${bootargs} console=ttyS0,115200
ext2load sata 0:2 0x400000 /canyonlands/uImage
ext2load sata 0:2 0x800000 /canyonlands/canyonlands.dtb
fdt addr 0x800000 0x4000
bootm 0x400000 - 0x800000

If you drive SATA-2 disk on Canyonlands, you must change parts from
PI2PCIE212 to PI2PCIE2212 on U25. We confirmed to boot by using
following disks:

1.Vendor: Fujitsu	 Type: MHW2040BS
2.Vendor: Fujitsu	 Type: MHW2060BK
3.Vendor: HAGIWARA SYS-COM:HFD25S-032GT
4.Vendor: WesternDigital Type: WD3200BJKT (CONFIG_LBA48 required)
5.Vendor: WesternDigital Type: WD3200BEVT (CONFIG_LBA48 required)
6.Vendor: Hitachi	 Type: HTS543232L9A300 (CONFIG_LBA48 required)
7.Vendor: Seagate	 Type: ST31000333AS (CONFIG_LBA48 required)
8.Vendor: Transcend	 Type: TS32GSSD25S-M
9.Vendor: MTRON		 Type: MSD-SATA1525-016

Signed-off-by: Kazuaki Ichinohe <kazuichi at fsi.co.jp>
2009-07-19 11:24:09 +02:00
Reinhard Arlt 52a0e2dee9 Add support for the Tundra TSI148 VME-bridge
From: Reinhard Arlt <reinhard.arlt@esd-electronics.com>

This patch adds support for the Tundra TSI148 VME-bridge. It's used on
the upcoming esd VME8349 board.

Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-19 11:21:08 +02:00
Mike Frysinger 8d1fea2c40 Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDR
MAC addresses should not be hardcoded in boards to avoid random link level
conflicts.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-18 21:16:08 -04:00
Mike Frysinger baf3570503 Blackfin: bf533-stamp: back down SCLK a bit
While the 1.0 and 1.2 spin of the bf533-stamp boards can handle the higher
SCLK speeds just fine, the 1.1 spin cannot due to the bugs introduced with
the shortened SDRAM traces.  So lower the SCLK speed down to a value that
all three can handle.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-18 21:16:01 -04:00
Mike Frysinger 909878fd3f Blackfin: add os log functions
Part of the mini Blackfin ABI with operating systems is that they can use
0x4f0-0x4f8 to pass log buffers to/from bootloaders.  So add support to
U-Boot for reading the log buffer.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-18 21:15:50 -04:00
Kim Phillips 9993e196da mpc83xx: convert all remaining boards over to 83XX_GENERIC_PCI
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-18 19:43:04 -05:00
Jean-Christophe PLAGNIOL-VILLARD 7e3be7cf3b console: unify printing current devices
Create stdio_print_current_devices() for this purpose

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-19 01:02:46 +02:00
Wolfgang Denk a694610d33 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2009-07-19 00:38:23 +02:00
Wolfgang Denk 2eb99ca802 NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
Commit 8d2effea added a warning for configurations that use NAND
without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
failed to fix the affected boards.

This patch covers the non-PPC boards that were missed in the previous
patch (commit 170c1972).

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 21:56:15 +02:00
Wolfgang Denk 7024aa14df at91cap9adk: fix #ifdef/#endif pairing
The #ifdef/#endif pairing in this file was obviously messed up.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 20:46:38 +02:00
Prafulla Wadaskar 4abc5bffea Marvell MV88F6281GTW_GE Board support
This is Marvell's 88F6281_A0 based custom board developed
for wireless access point product

This patch is tested for-
1. Boot from DRAM/SPI flash/NFS
2. File transfer using tftp and loadb
3. SPI flash read/write/erase
4. Booting Linux kernel and RFS from SPI flash
5. Boot from USB supported

Reviewed-by: Ronen Shitrit <rshitrit@marvell.com>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2009-07-18 20:41:42 +02:00
Prafulla Wadaskar 55dd4ba541 Marvell Sheevaplug Board support
Reference:
http://plugcomputer.org/
http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support

This patch is tested for-
1. Boot from DRAM/NAND flash
2. File transfer using tftp
3. NAND flash read/write/erase
4. Linux kernel and RFS Boot from NAND
5. Enabled USB PHY init for kernel need
6. Boot from USB supported

Note: to boot Kirkwood kernel with USB support,
	you should add "usb start" in the boot sequence

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2009-07-18 18:46:09 +02:00
Wolfgang Denk 9ff59601c7 MPC837XERDB: fix warning: "CONFIG_SYS_MONITOR_LEN" redefined
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 16:36:11 +02:00
Wolfgang Denk 2b5243fc24 8xxx: fix warning: implicit declaration of function 'uec_standard_init'
Commit 8e55258f created function uec_standard_init() to initialize
all UEC interfaces for 83xx and 85xx but failed to provide a
prototype for it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 16:13:18 +02:00
Wolfgang Denk 170c19725e NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
Commit 8d2effea added a warning for configurations that use NAND
without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
failed to fix the affected boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 15:32:10 +02:00
Jean-Christophe PLAGNIOL-VILLARD 52cb4d4fb3 stdio/device: rework function naming convention
So far the console API uses the following naming convention:

	======Extract======
	typedef struct device_t;

	int	device_register (device_t * dev);
	int	devices_init (void);
	int	device_deregister(char *devname);
	struct list_head* device_get_list(void);
	device_t* device_get_by_name(char* name);
	device_t* device_clone(device_t *dev);
	=======

which is too generic and confusing.

Instead of using device_XX and device_t we change this
into stdio_XX and stdio_dev

This will also allow to add later a generic device mechanism in order
to have support for multiple devices and driver instances.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Edited commit message.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 00:27:46 +02:00
Peter Tyser f732a7598f ppc: Fix compile error for boards with CONFIG_DDR_ECC
A bug was introduced by commit e94e460c6e
which affected non-MPC83xx/85xx/86xx ppc boards which had CONFIG_DDR_ECC
defined and resulted in errors such as:

Configuring for canyonlands board...
fsl_dma.c:50:2: error: #error "Freescale DMA engine not supported on your
processor"
make[1]: *** No rule to make target `.depend', needed by `libdma.a'.  Stop.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-07-17 23:44:42 +02:00
Prafulla Wadaskar 18e067de9b include/config_cmd_default.h cleanup
arranged configurations in alphabetical order
CONFIG_CMD_FLASH moved under ifndef CONFIG_SYS_NO_FLASH

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2009-07-17 23:25:51 +02:00
Wolfgang Denk dcf728a6af Merge branch 'master' of git://git.denx.de/u-boot-video 2009-07-17 23:05:41 +02:00
Scott Wood 2419169f57 Remove legacy NAND and disk on chip references from boards.
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-17 15:03:28 -05:00
Anatolij Gustschin cce99b2a7d video: mb862xx: use macros instead of magic numbers
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2009-07-17 15:23:40 +02:00
Michal Simek 292ed489db microblaze: Remove ignored return type for __arch__swab16 function
This change remove compilation warnings.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-17 08:02:52 +02:00
Scott Wood be33b046b5 Remove legacy NAND and disk on chip code.
Legacy NAND had been scheduled for removal.  Any boards that use this
were already not building in the previous release due to an #error.

The disk on chip code in common/cmd_doc.c relies on legacy NAND,
and it has also been removed.  There is newer disk on chip code
in drivers/mtd/nand; someone with access to hardware and sufficient
time and motivation can try to get that working, but for now disk
on chip is not supported.

Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-16 19:07:47 -05:00
Stefan Roese fbdaafaee7 nand: Change NAND_MAX_OOBSIZE to 218 as needed for some 4k page devices
This is needed for the MPC512x NAND driver (fsl_nfc_nand.c) which already
defines such a 4k plus 218 bytes ECC layout.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-16 17:52:03 -05:00
Anton Vorontsov b8b71ffbc3 mpc83xx: MPC8315ERDB: Use hwconfig for board type selection
This patch simply converts the board to the hwconfig infrastructure.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-16 22:47:01 +02:00
Anton Vorontsov c78c678354 mpc83xx: MPC837XEMDS: Fixup eSDHC nodes in device tree
fdt_fixup_esdhc() will either disable or enable eSDHC nodes, and
also will fixup clock-frequency property.

Plus, since DR USB and eSDHC are mutually exclusive, we should
only configure the eSDHC if asked through hwconfig.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-16 22:25:43 +02:00
Anton Vorontsov c9646ed758 mpc83xx: MPC837XERDB: Add support for FSL eSDHC
This patch adds support for eSDHC on MPC837XERDB boards. The WP
switch doesn't seem to work on RDB boards though, the WP pin is
always asserted (can see the pin state when it's in GPIO mode).

FSL DR USB and FSL eSDHC are mutually exclusive because of pins
multiplexing, so user should specify 'esdhc' or 'dr_usb' options
in the hwconfig environment variable to choose between the
devices.

p.s.
Now we're very close to a monitor len limit (196 bytes left using
gcc-4.2.0), so also increase the monitor len by one sector (64 KB).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-16 22:25:34 +02:00
Anton Vorontsov b33433a63f fsl_esdhc: Add device tree fixups
This patch implements fdt_fixup_esdhc() function that is used to fixup
the device tree.

The function adds status = "disabled" propery if esdhc pins muxed away,
otherwise it fixups clock-frequency for esdhc nodes.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-16 22:24:06 +02:00
Anton Vorontsov 93f9dcf9e8 Add simple hwconfig infrastructure
This patch implements simple hwconfig infrastructure: an
interface for software knobs to control a hardware.

This is very simple implementation, i.e. it is implemented
via `hwconfig' environment variable. Later we could write
some "hwconfig <enable|disable|list>" commands, ncurses
interface for Award BIOS-like interface, and frame-buffer
interface for AMI GUI[1] BIOS-like interface with mouse
support[2].

Current implementation details/limitations:

1. Doesn't support options dependencies and mutual exclusion.
   We can implement this by integrating apt-get[3] into the
   u-boot. But I didn't bother yet.

2. Since we don't implement hwconfig command, i.e. we're working
   with the environement directly, there is no way to tell that
   toggling a particular option will need a reboot to take
   an effect. So, for now it's advised to always reboot the
   target after modifying hwconfig variable.

3. We support hwconfig options with arguments. For example,

   set hwconfig dr_usb:mode=peripheral,phy_type=ulpi

   That means:
   - dr_usb - enable Dual-Role USB controller;
   - dr_usb:mode=peripheral - USB in Function mode;
   - dr_usb:phy_type=ulpi - USB should work with ULPI PHYs;

The purpose of this simple implementation is to define some
internal API and then we can continue improving user experience
by adding more mature interface, like hwconfig command with
bells and whistles. Or not adding, if we feel that current
interface fits its needs.

[1] http://en.wikipedia.org/wiki/American_Megatrends
[2] Regarding ncurses and GUI with mouse support -- I'm just
    kidding.
[3] The comment regarding apt-get is also a joke, meaning that
    dependency tracking could be non-trivial. For example, for
    enabling HW feature X we may need to disable Y, and turn Z
    into reduced mode (like RMII-only interface for ethernet,
    no MII).

    It's quite trivial to implement simple cases though.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-16 22:23:53 +02:00
Wolfgang Denk 10faafd5ff Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx 2009-07-16 22:13:45 +02:00
Wolfgang Denk 6973fb414c Merge branch 'asm-generic' of git://git.denx.de/u-boot-microblaze 2009-07-16 21:53:15 +02:00
Kim Phillips 4a9932a436 mpc83xx: increase MONITOR_LEN to offset growing pains
Saving the environment leads to overwriting u-boot itself,
bricking boards.  Increase u-boot's image size so the environment
base address doesn't end up overlapping u-boot text.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-14 14:58:39 -05:00
Valeriy Glushkov c31e13260b usb: mpx8349itx: added support of loading images from USB storage (MPH/DR)
Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-14 14:55:46 -05:00
Valeriy Glushkov d89e1c3689 usb: mpc834x: added support of the MPH USB controller in addition to the DR one
Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-14 14:53:52 -05:00
Kim Phillips d9ac3d5a17 mpc83xx: set 64BIT_VSPRINTF for boards using nand_util
When enabling NAND support for a board, one must also define
CONFIG_SYS_64BIT_VSPRINTF because this is needed in nand_util.c
for correct output.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Dave Liu <daveliu@freescale.com>
Cc: Ron Madrid <ron_madrid@sbcglobal.net>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-07-14 14:47:21 -05:00
TsiChung Liew 052c089165 ColdFire: Update bootargs
Add a bootargs for M53017EVB and update bootargs
for M54451EVB

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
2009-07-14 09:46:42 -05:00
TsiChung Liew ee0a846246 ColdFire: Add DSPI support for MCF5227x and MCF5445x
Remove individual CPU specific DSPI driver.
Add required feature for the common DSPI driver in cpu_init and
in platform configuration file.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
2009-07-14 09:46:34 -05:00
TsiChung Liew 4567c7bff2 ColdFire: Fix M53017EVB flash size
Increase the flash size from 8MB to 16MB

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
2009-07-14 09:27:20 -05:00
TsiChung Liew bf9a521529 ColdFire: Add M5208EVB and MCF520x CPU support
Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
2009-07-14 09:27:17 -05:00
TsiChung Liew 709b384b64 ColdFire: Update for M54451EVB
Update serial boot DRAM's Internal RAM, vector table and DRAM in
start.S, serial flash's read status command over SPI and NOR
flash.

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
2009-07-14 09:27:14 -05:00
TsiChung Liew bbf6bbffca ColdFire: Update configuration file to use flash buffer write
Update M52277EVB, M53017EVB and M54455EVB platform configuration
file to use flash buffer write

Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
2009-07-14 09:27:10 -05:00
Wolfgang Denk 7d4450a977 mpc5121ads: add JFFS2 and MTDPARTS support; adjust flash map
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-14 00:02:49 +02:00
Wolfgang Denk 1f1f82f3de aria: add JFFS2 and MTDPARTS support; adjust flash map
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-14 00:02:47 +02:00
Wolfgang Denk a6d6d46a4f aria: enable NAND flash support
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-14 00:02:45 +02:00
Wolfgang Denk 13946925e8 MPC512x: fix typo in comment listing the NAND driver name
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2009-07-14 00:02:44 +02:00
Wolfgang Denk 2ca6f74d09 mecp5123: cleanup - remove dead code
Remove dead code that was obviously a left-over from copy & paste.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2009-07-14 00:02:43 +02:00
Wolfgang Denk 25671c8672 aria: adjust memory controller initialization
Needed for Rev. 2 silicon at 400 MHz

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-14 00:02:42 +02:00
Wolfgang Denk 7629f1c06b MPC512x: factor out common code
Now that we have 3 boards for the MPC512x it turns out that they all
use the very same fixed_sdram() code.

This patch factors out this common code into cpu/mpc512x/fixed_sdram.c
and adds a new header file, include/asm-ppc/mpc512x.h, with some
macros, inline functions and prototype definitions specific to MPC512x
systems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2009-07-14 00:02:41 +02:00
Wolfgang Denk a9905db5d2 MPC512x: Add MSCAN1...4 Clock Control Registers
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2009-07-14 00:01:32 +02:00
Wolfgang Denk f5489c4200 MPC512x: enabling NAND support requires CONFIG_SYS_64BIT_VSPRINTF
When enabling NAND support for a board, one must also define
CONFIG_SYS_64BIT_VSPRINTF because this is needed in nand_util.c
for correct output.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2009-07-14 00:00:39 +02:00
Wolfgang Denk 87abce6e91 Merge branch 'master' of /home/wd/git/u-boot/master 2009-07-14 00:00:04 +02:00
Wolfgang Denk bb272ec8df Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-07-13 23:45:10 +02:00
Wolfgang Denk c3ae126c2c Merge branch 'master' of git://git.denx.de/u-boot-arm 2009-07-13 23:45:02 +02:00
Wolfgang Denk 4b96cb6777 Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-07-13 23:37:59 +02:00
Wolfgang Denk ed01c4f59d Merge branch 'master' of git://git.denx.de/u-boot-sh 2009-07-13 23:37:55 +02:00
Wolfgang Denk 17f098bd4a Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-07-13 23:34:33 +02:00
Wolfgang Denk 5db1dcce91 Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx 2009-07-13 23:34:30 +02:00
Wolfgang Denk 70ad83376d Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-07-13 23:33:20 +02:00
Wolfgang Denk 116a0a544d Merge branch 'master' of git://git.denx.de/u-boot-blackfin 2009-07-13 23:33:16 +02:00
Wolfgang Denk 6a6bf27f26 Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-07-13 23:32:08 +02:00
Jean-Christophe PLAGNIOL-VILLARD 986922714f versatile: update config and merge to cfi flash driver
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Peter Pearse <peter.pearse@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
2009-07-12 21:59:52 +02:00
Jean-Christophe PLAGNIOL-VILLARD d6e8ed832b versatile: specify the board type on the prompt
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Peter Pearse <peter.pearse@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
2009-07-12 21:59:50 +02:00
Sedji Gaouaou 5ccc2d99d6 at91: Introduction of at91sam9g10 SOC.
AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
faster clock speed: 266/133MHz.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
2009-07-12 17:56:11 +02:00
Sedji Gaouaou 22ee647380 at91: Introduction of at91sam9g45 SOC.
AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of
peripherals.

The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES.
On the board you can find 2 USART, USB high speed,
a 480*272 LG lcd, ethernet, gpio/joystick/buttons.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
2009-07-12 17:43:34 +02:00
Daniel Mack c33c5990ce pxa: fix CKEN_B register bits
The current defition for CKEN_B register bits is nonsense. Adding 32 to
the shifted value is equal to '| (1 << 5)', and this bit is marked
'reserved' in the PXA docs.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
2009-07-12 17:43:32 +02:00
Daniel Mack bd876be46f pxa: add clock for system bus 2 arbiter
This clock is needed for systems using the USB2 device unit or the 2d
graphics accelerator.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
2009-07-12 17:43:31 +02:00
Prafulla Wadaskar b996165f5a arm: Kirkwood: bugfix: UART1 bar correction
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2009-07-12 17:43:15 +02:00
Nobuhiro Iwamatsu 04366d070a sh: Update pci config for Renesas r7780mp board
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2009-07-11 09:03:41 +09:00
Nobuhiro Iwamatsu 74d9c16a68 sh: Add support ESPT-GIGA borad
ESPT-Giga is SH7763-based reference board.
Board support is relatively sparse, presently supporting serial,
gigabit ethernet, USB host, and MTD.

More information (in Japanese) available at:
http://www.cente.jp/product/cente_hard/ESPT-Giga.html

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2009-07-11 09:02:21 +09:00
Matthias Fuchs dae4e0148a Add ESD PCI vendor ID
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
2009-07-11 01:02:20 +02:00
Timur Tabi 890d242fac remove _IO_BASE and KSEG1ADDR from board configuration files
The KSEG1ADDR macro used to be necessary for the RTL8139 Ethernet
driver, but the code that used that macro was removed over a year
ago, so board configuration files no longer need to define it.

The _IO_BASE macro is also automatically defined to 0 if it isn't
already set, so there's no need to define that macro either in the
board configuration files.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Andy Fleming <afleming@freescale.com>
Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
2009-07-11 00:19:16 +02:00
Jon Smirl c9969947a4 board support patch for phyCORE-MPC5200B-tiny
Add support for the Phytec phyCORE-MPC5200B-tiny.
Code originally from Pengutronix.de.
Created CONFIG_SYS_ATA_CS_ON_TIMER01 define for when IDE CS is on
Timer 0/1

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
2009-07-10 23:21:32 +02:00
Harald Krapfenbauer ed540f07b8 Blackfin: cm-bf561: add example settings for EXT-BF5xx-USB-ETH2 add-on
The cm-bf561 module can easily hook up to the EXT-BF5xx-USB-ETH2 extender
board, so add a simple example of how to do that in the board config.

Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-10 02:36:30 -04:00
Mike Frysinger f8bf54b408 Blackfin: blackstamp: update spi flash settings
The latest blackstamp boards can only run the SPI flash at 15MHz before
they start to crap out, so lower the max speeds accordingly.  The new SPI
flash also has different sector requirements, so update the environment
sizes as well.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-10 02:36:28 -04:00
Matthias Fuchs c71103f9dc ppc4xx: Make is_pci_host() available for all 440 and 405 CPUs
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-10 08:25:55 +02:00
Kim Phillips 4e04f16020 usb: fix CONFIG_SYS_MPC83xx_USB_ADDR not defined error
fix a stray CONFIG_MPC83XX that escaped commit
0f89860494.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
2009-07-09 21:33:14 +02:00
Michal Simek bc0d3296f1 asm-generic: Consolidate errno.h to asm-generic/errno.h
This patch use blackfin errno.h implementation which
correspond Linux kernel one.

MIPS implemetation is different that's why I keep it.

I removed ppc_error_no.h from Marvell boards which
was the same too.

I have got ack from ppc40x, blackfin, arm, coldfire and avr custodians.

Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-09 14:07:11 +02:00
Wolfgang Denk a350d0d37d Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-07-08 22:01:54 +02:00
Wolfgang Denk d073aeea4f Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx 2009-07-08 22:01:50 +02:00
Wolfgang Denk 23bca26ab0 Merge branch 'master' of /home/wd/git/u-boot/custodians 2009-07-08 21:51:17 +02:00
Heiko Schocher efbf14e9a2 all platforms: make show_boot_progress() work again
Signed-off-by: Heiko Schocher <hs@denx.de>
2009-07-08 21:38:35 +02:00
Felix Radensky 26d37f0061 ppc4xx: Fix FDT EBC mappings on Canyonlands
This patch fixes 2 problems with FDT EBC mappings on Canyonlands.
First, NAND EBC mapping was missing, making Linux NAND driver
unusable on this board. Second, NOR remapping code assumed that
NOR is always on CS0, however when booting from NAND NOR is on CS3.

Signed-off-by: Felix Radensky <felix@embedded-sol.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-08 10:59:06 +02:00
Nobuhiro Iwamatsu baa9f9ba43 sh: Revised the build with newest compiler
The check of data became severe from newest gcc.
This patch checked in gcc-4.2 and 4.3 .

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2009-07-08 11:43:16 +09:00
Jean-Christophe PLAGNIOL-VILLARD be45c63256 sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2009-07-08 11:43:16 +09:00
Jean-Christophe PLAGNIOL-VILLARD 8dd29c87ba sh3/sh4: fix CONFIG_SYS_HZ to 1000
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2009-07-08 11:43:15 +09:00
Jean-Christophe PLAGNIOL-VILLARD add380f51f sh: introduce clock framework
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2009-07-08 11:43:15 +09:00
Guennadi Liakhovetski b74ab73736 nand_spl: read environment early, when booting from NAND using nand_spl
Currently, when booting from NAND using nand_spl, in the beginning the default
environment is used until later in boot process the dynamic environment is read
out. This way environment variables that must be interpreted early, like the
baudrate or "silent", cannot be modified dynamically and remain at their
default values. Fix this problem by reading out main and redundand (if used)
copies of the environment in the nand_spl code.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-07 17:58:07 -05:00
Jean-Christophe PLAGNIOL-VILLARD 378adfcdf4 mtd: nand: use loff_t for offset
nand_util currently uses size_t which is arch dependent and not always a
unsigned long.  Now use loff_t, as does the linux mtd layer.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-07 17:58:06 -05:00
Mike Frysinger cd84423a09 mtd: nand: new base driver for memory mapped nand devices
The BF537-STAMP Blackfin board had a driver for working with NAND devices
that are simply memory mapped.  Since there is nothing Blackfin specific
about this, generalize the driver a bit so that everyone can leverage it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-07 17:58:04 -05:00
David Brownell 154b5484ac davinci_nand chipselect/init cleanup
Update chipselect handling in davinci_nand.c so that it can
handle 2 GByte chips the same way Linux does:  as one device,
even though it has two halves with independent chip selects.
For such chips the "nand info" command reports:

  Device 0: 2x nand0, sector size 128 KiB

Switch to use the default chipselect function unless the board
really needs its own.  The logic for the Sonata board moves out
of the driver into board-specific code.  (Which doesn't affect
current build breakage if its NAND support is enabled...)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-07 17:58:03 -05:00
Sandeep Paulraj 496863b244 NAND DaVinci: Update to ALE/CLE Mask values
All DaVinci SOC's use a CLE mask of 0x10 and an ALE mask of 0x8
except the DM646x. This was decided by the design team driving the design.
This patch updates the CLE and ALE values for DM646x.
Updated patches for DM646x will be sent shortly.
This applies to u-boot-nand-flash git

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-07 17:58:02 -05:00
Sandeep Paulraj 0c1684437e ARM DaVinci: Changing ALE Mask Value
The ALE mask used by DaVinci SOCs is wrong. The patch changes the mask value
from '0xa' to '0x8'. This is the mask we use for all TI releases.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-07 17:58:02 -05:00
David Brownell 6e29ed8e57 davinci_nand: cleanup II (CONFIG_SYS_DAVINCI_BROKEN_ECC)
Remove CONFIG_SYS_DAVINCI_BROKEN_ECC option.  It's not just nasty;
it's also unused by any current boards, and doesn't even match the
main U-Boot distributions from TI (which use soft ECC, or 4-bit ECC
on newer chips that support it).

DaVinci GIT kernels since 2.6.24, and mainline Linux since 2.6.30,
match non-BROKEN code paths for 1-bit HW ECC.  The BROKEN code paths
do seem to partially match what MontaVista/TI kernels (4.0/2.6.10,
and 5.0/2.6.18) do ... but only for small pages.  Large page support
is really broken (and it's unclear just what software it was trying
to match!), and the ECC layout was making three more bytes available
for use by filesystem (or whatever) code.

Since this option itself seems broken, remove it.  Add a comment
about the MV/TI compat issue, and the most straightforward way to
address it (should someone really need to solve it).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-07 17:58:01 -05:00
David Brownell fcb7747775 davinci_nand: cleanup I (minor)
Minor cleanup for DaVinci NAND code:

 - Use I/O addresses from nand_chip; CONFIG_SYS_NAND_BASE won't
   be defined when there are multiple chipselect lines in use
   (as with common 2 GByte chips).

 - Cleanup handling of EMIF control registers
    * Only need one pointer pointing to them
    * Remove incorrect and unused struct supersetting them

 - Use the standard waitfunc; we don't need a custom version

 - Partial legacy cleanup:
    * Don't initialize every board like it's a DM6446 EVM
    * #ifdef a bit more code for BROKEN_ECC

Sanity checked with small page NAND on dm355 and dm6446 EVMs;
and large page on dm355 EVM (packaged as two devices, not one).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2009-07-07 17:44:55 -05:00
Wolfgang Denk 8e5e9b940c Coding style cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-07 22:35:02 +02:00
Wolfgang Denk a48ecc969f Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
	drivers/spi/Makefile

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-07 22:22:05 +02:00
Wolfgang Denk bec9cab929 Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx 2009-07-07 21:06:07 +02:00
Magnus Lilja d08e5ca301 MX31: Add NAND SPL boot support to i.MX31 PDK board.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2009-07-06 21:53:18 +02:00
Prafulla Wadaskar 78eabb90b7 arm: Kirkwood: arch specific updated for ehci-Kirkwood driver support
This patch abstracts Kirkwood arch specific changes to support ehci-kirkwood driver

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2009-07-06 21:53:15 +02:00
Alessandro Rubini 095a460b49 arm nomadik: use 1000 as HZ value and rewrite timer code
This sets CONFIG_SYS_HZ to 1000 as required, and completely rewrites
timer code, which is now both correct and much smaller.  Unused
functions like udelay_masked() have been removed as no driver uses
them, even the ones that are not currently active for this board.
mtu.h is copied literally from the kernel sources.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-06 21:53:08 +02:00
Alessandro Rubini f7aa59b29a arm nomadik: allow Nand and OneNand to coexists
The evaluation kit has both Nand and OneNand, both drivers are there
and the two configurations only select a different default for the
jffs partition. This adds the OneNand driver and cleans up storage.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
2009-07-06 21:53:06 +02:00
Alessandro Rubini fd14c41a86 arm nomadik: cleanup reset
There is only one public release of the Nomadik chip, so the ifdef
in reset code as well as a define in the config file are not needed

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
2009-07-06 21:53:03 +02:00
Alessandro Rubini ee1363f2da arm nomadik: rename board to nhk8815
This is an error in my side in the initial submission: nobody
calls it ""nmdk8815", it's "nomadik hardware kit", nhk8815, instead.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
2009-07-06 21:53:00 +02:00
Stefano Babic 040f8f63e9 xscale: add support for the polaris board
The Polaris board is based on the TrizepsIV module of
Keith & Koep (http://www.keith-koep.com).

Signed-off-by: Stefano Babic <sbabic@denx.de>
2009-07-06 21:52:58 +02:00
Daniel Gorsulowski 33b1d3f43a at91: Add esd gmbh MEESC board support
This patch adds support for esd gmbh MEESC board.
The MEESC is based on an Atmel AT91SAM9263 SoC.

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2009-07-06 21:52:50 +02:00
Jean-Christophe PLAGNIOL-VILLARD 21761540b4 ARM: Update mach-types
update against linux v2.6.30

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-06 21:52:47 +02:00
Daniel Gorsulowski 45627fce18 at91: Add CAN init function
To enable CAN init, CONFIG_CAN has to be defined in the board config file
and at91_can_hw_init() has to be called in the board specific code.

CAN is available on AT91SAM9263 and AT91CAP9 SoC.

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2009-07-06 21:52:43 +02:00
Simon Kagstrom 2e23008e5d arm: Kirkwood: Correct header define
Correct define typo (. -> ,)

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
2009-07-06 21:52:41 +02:00
Magnus Lilja 8449f287f5 MX31: Add basic support for Freescale i.MX31 PDK board.
Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board).

This patch assumes that some other program performs the actual
NAND boot.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Acked-by: Fabio Estevam <fabioestevam@yahoo.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-06 21:52:38 +02:00
Jean-Christophe PLAGNIOL-VILLARD 8d460a573e S3C24x0: extract interrupts from timer
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-06 21:52:35 +02:00
Jean-Christophe PLAGNIOL-VILLARD c8badbe500 dm355/pm9261: add missing CONFIG_NET_MULTI
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-06 21:52:33 +02:00
Kim, Heung Jun 06e758e75c move L2 cache enable/disable function to cache.c in the omap3 SoC directory
Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
CC: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-07-06 21:52:25 +02:00
Jean-Christophe PLAGNIOL-VILLARD 2600b8571a versatile: config coding style cleanup
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Peter Pearse <peter.pearse@arm.com>
2009-07-06 21:52:19 +02:00
Prafulla Wadaskar 4efb77d41f arm: Kirkwood: Basic SOCs support
Kirkwood family controllers are highly integrated SOCs
based on Feroceon-88FR131/Sheeva-88SV131/arm926ejs cpu core.

SOC versions supported:-
1) 88F6281-A0       define CONFIG_KW88F6281_A0
2) 88F6192-A0       define CONFIG_KW88F6192_A0

Other supported features:-
1) get_random_hex() fucntion
2) PCI Express port initialization
3) NS16550 driver support

Contributors:
Yotam Admon <yotam@marvell.com>
Michael Blostein <michaelbl@marvell.com

Reviewed-by: Ronen Shitrit <rshitrit@marvell.com>
Acked-by: Stefan Rose <sr@denx.de>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2009-07-06 21:52:17 +02:00
Prafulla Wadaskar 5c3d5817e5 arm: generic cache.h for ARM architectures
This patch is required for Kirkwood SoC support
may be used by other ARM architectures

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2009-07-06 21:52:15 +02:00
Matthias Ludwig 9c8c706c92 OMAP3EVM: fix typo. replace CS6 by CS5, no functionality change
Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
2009-07-06 21:52:12 +02:00
Peter Tyser e94e460c6e 83xx: Add support for fsl_dma driver
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Reviewed-by: Ira W. Snyder <iws@ovro.caltech.edu>
Tested-by: Ira W. Snyder <iws@ovro.caltech.edu>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-02 11:15:57 -05:00
Poonam Aggrwal 039594a430 8xxx: Second UART port added for MPC85xx, MPC83xx, MPC86xx processors
Defining the next two configs allows to switch the serial port from the
console using the setenv stdin and stdout
  1. #define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */
  2. #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-02 08:34:13 -05:00
Poonam Aggrwal 546b103290 85xx: Adds GPIO registers to MPC85xx Memory Map.
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-02 08:33:20 -05:00
Peter Tyser 5da6f806b4 86xx: XPedite5170 board support
Initial support for Extreme Engineering Solutions XPedite5170 -
a MPC8640-based 3U VPX single board computer with a PMC/XMC
site.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-01 23:25:48 -05:00
Peter Tyser 0d595f76bc fsl_dma: Break out common memory initialization function
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-01 23:12:01 -05:00
Peter Tyser 191c711859 fsl_dma: Move dma function prototypes to common header file
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-01 23:11:52 -05:00
Peter Tyser 9c06071a60 fsl_dma: Add bitfield definitions for common registers
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-01 23:01:55 -05:00
Peter Tyser 017f11f68e 8xxx: Break out DMA code to a common file
DMA support is now enabled via the CONFIG_FSL_DMA define instead of the
previous CONFIG_DDR_ECC

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-01 23:01:51 -05:00
Roy Zang 29c3518246 85xx: Add pci e1000 Ethernet support for P2020 board
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-30 08:26:34 -05:00
Kumar Gala 156984a361 8xxx: Fix PCI bus address setup for 36-bit configs
We want the outbound PCI memory map to end at the 4G boundary so we
can maximize the amount of space available for inbound mappings if
we have large amounts of memory.

This matches the device tree setup in the kernel for the 36-bit physical
configs for the platforms that have one (MPC8641 HPCN & MPC8572 DS).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-30 08:24:22 -05:00
Kumar Gala 480f617905 86xx: Add CPU_TYPE_ENTRY support
Unify with 83xx and 85xx and use CPU_TYPE_ENTRY.  We are going to use
this to convey the # of cores and DDR width in the near future so its
good to keep in sync.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-30 08:24:22 -05:00
Prafulla Wadaskar 5710de4580 spi: Add Marvell Kirkwood SPI driver
This patch adds a SPI driver for the Marvell Kirkwood SoC's.

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2009-06-26 00:59:09 +02:00
Jean-Christophe PLAGNIOL-VILLARD 46937b2742 integratorap/cp: use cfi driver
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Peter Pearse <peter.pearse@arm.com>
2009-06-23 00:10:04 +02:00
Ilya Yanok 47d19da4d3 serial_mx31: allow it to work with mx27 too and rename to serial_mxc
UART hardware on i.MX27 is the same as on the i.MX31 so we just
need to provide the driver with correct address of the registers.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-06-21 16:18:13 +02:00
Ilya Yanok 1dc4da749d mx27: basic cpu support
This patch adds generic code to support Freescale's i.MX27 SoCs.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-06-21 16:18:13 +02:00
Magnus Lilja dd2f6965a6 i.MX31: Create a common device file.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2009-06-21 16:18:13 +02:00
Jean-Christophe PLAGNIOL-VILLARD 958f7da788 ARM: Add macros.h to be used in assembler file.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-21 16:18:12 +02:00
Magnus Lilja 40c642bc19 MX31: Add NAND SPL for i.MX31.
This patch adds the NAND SPL framework needed to boot i.MX31 boards
from NAND.

It has been tested on a i.MX31 PDK board with large page NAND. Small
page NANDs should work as well, but this has not been tested.

Note: The i.MX31 NFC uses a non-standard layout for large page NANDs,
whether this is compatible with a particular setup depends on how
the NAND device is programmed by the flash programmer (e.g. JTAG
debugger).

The patch is based on the work by Maxim Artamonov.

Signed-off-by: Maxim Artamonov <scn1874@yandex.ru>
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
2009-06-21 16:18:12 +02:00
Jean-Christophe PLAGNIOL-VILLARD 8096c51fd4 at91: unify nor boot support
the lowlevel init sequence is the same so unify it

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-21 16:18:12 +02:00
Jean-Christophe PLAGNIOL-VILLARD 1b3b7c640d at91sam9263ek: add nor flash support
this will allow you to store use it for the env and to boot directly U-Boot from

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-21 16:18:11 +02:00
Ilko Iliev 3294923297 at91: add support for the PM9261 board of Ronetix GmbH
The PM9261 board is based on the AT91SAM9261-EK board.

Here is the page on Ronetix website:
http://www.ronetix.at/starter_kit_9261.html

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-21 16:18:11 +02:00
Jean-Christophe PLAGNIOL-VILLARD 01550a2b65 pm9263: use macro instead of hardcode value for the lowlevel_init
optimize a few the RAM init

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-21 16:18:11 +02:00
Jean-Christophe PLAGNIOL-VILLARD 7a11c7f974 pm9263: lowlevel init update
move PSRAM init to pm9263.c
this will allow us after to make the nor lowlevel_init generic

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-06-21 16:18:11 +02:00
Mike Frysinger afac8b0717 Blackfin: fix SPI flash speed define name
The SPI flash define is named CONFIG_SF_DEFAULT_SPEED, not
CONFIG_SF_DEFAULT_HZ, so fix the typos in the Blackfin boards.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-15 13:30:21 -04:00
Mike Frysinger fea63e2a44 Blackfin: bf548-ezkit: bump up monitor size
The latest version of U-Boot got a bit fatter in the BSS section which
caused overflows in the RAM region, so increase the monitor size.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-15 13:30:18 -04:00
Vivi Li bc43a8d899 Blackfin: bf533-stamp/bf537-stamp: fix env settings for SPI flash
The SPI flash layer is much stricter about sector usage than the eeprom
layer we used to use, so update the env settings to better match the
sector alignment of the flashes we use.

Signed-off-by: Vivi Li <vivi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-15 13:30:16 -04:00
Wolfgang Denk c9005a72fe Merge branch 'master' of git://git.denx.de/u-boot-net 2009-06-15 11:15:54 +02:00
Remy Bohmer 60f61e6d76 Convert DM9000 driver for CONFIG_NET_MULTI
All drivers need to be converted to CONFIG_NET_MULTI.
This patch converts the dm9000 driver.

Signed-off-by: Thomas Smits <ts.smits@gmail.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-15 00:13:55 -07:00
Prafulla Wadaskar 9131589ada net: Add Marvell Kirkwood gigabit ethernet driver
This patch adds a egiga driver for the Marvell Kirkwood SoC's.

Contributors:
Yotam Admon <yotam@marvell.com>
Michael Blostein <michaelbl@marvell.com

Reviewed-by: Ronen Shitrit <rshitrit@marvell.com>
Acked-by: Stefan Rose <sr@denx.de>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-15 00:13:55 -07:00
s-paulraj@ti.com 7835f4b949 DaVinci Network Driver Updates
Different flavours of DaVinci SOC's have differences in their EMAC IP
This patch does the following
1) Updates base addresses for DM365
2) Updates MDIO frequencies for DM365 and DM646x
3) Update EMAC wrapper registers for DM365 and DM646x

Patch applies to u-boot-net git. the EMAC driver itself
will be updated shortly to add support for DM365 and DM646x

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-15 00:13:55 -07:00
Ben Warren 8453587ef9 Switched davinci_emac Ethernet driver to use newer API
Added CONFIG_NET_MULTI to all Davinci boards
Removed all calls to Davinci network driver from board code
Added cpu_eth_init() to cpu/arm926ejs/cpu.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-15 00:13:54 -07:00
Prafulla Wadaskar 6f51deb7f2 Marvell MV88E61XX Switch Driver support
Chips supported:-
1. 88E6161 6 port gbe swtich with 5 integrated PHYs
2. 88E6165 6 port gbe swtich with 5 integrated PHYs
2. 88E6132 3 port gbe swtich with 2 integrated PHYs
Platform specific configuration supported for:-
default or router port vlan configuration
led_init configuration
mdip/n polarity reversal configuration

Note: This driver is supported and tested against
kirkwood egiga interface

Contributors:
Yotam Admon <yotam@marvell.com>
Michael Blostein <michaelbl@marvell.com

Reviewed by: Ronen Shitrit <rshitrit@marvell.com>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-15 00:13:54 -07:00
Zach LeRoy 091dc9f6ad tsec: Add support for BCM5482S PHY
Signed-off-by: Zach LeRoy <zleroy@xes-inc.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-06-15 00:13:54 -07:00
Mike Frysinger 9ff67e5e4c Blackfin: unify u-boot linker scripts
All the Blackfin linker scripts were duplicated across the board dirs with
no difference save from the semi-often used ENV_IS_EMBEDDED option.  So
unify all of them in the lib_blackfin/ dir and for the few boards that
need to embedded the environment directly, add a LDS_BOARD_TEXT define for
them to customize via their board config file.  This is much simpler than
forcing them to duplicate the rest of the linker script.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:14 -04:00
Mike Frysinger f52efcae98 Blackfin: bf518f-ezbrd: enable SST SPI flash driver
The BF51xF parts have an internal SST SPI flash, so make sure the driver is
enabled by default so we can access it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:13 -04:00
Mike Frysinger f348ab85f7 Blackfin: convert specific pre/post config headers to common method
The Blackfin port was using asm/blackfin-config-{pre,post}.h to setup
common Blackfin board defines.  The common method now is to use config.h,
so convert blackfin-config-post.h to that.  Rename the still Blackfin
specific blackfin-config-pre.h to config-pre.h so the naming conventions
at least line up.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:13 -04:00
Mike Frysinger 7c7503ee6c Blackfin: enable LZMA for all ADI boards
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:12 -04:00
Mike Frysinger 0e63dc0679 Blackfin: make default ADI env more flexible
Allow boards to easily override the root= and default bootcmd, allow
people to tweak the file used in default bootcmds at runtime via one env
var, and add a stock nandboot command.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:12 -04:00
Hoan Hoang 0f52b560f1 Blackfin: ibf-dsp561: new board port
Signed-off-by: Hoan Hoang <hnhoan@i-syst.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:11 -04:00
Mike Frysinger 3088189a15 Blackfin: blackstamp: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:11 -04:00
Mike Frysinger 59ac972970 Blackfin: bf537-srv1: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:10 -04:00
Mike Frysinger d7fdc1410b Blackfin: bf537-minotaur: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:09 -04:00
Mike Frysinger cb4b5e874f Blackfin: bf537-pnav: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:08 -04:00
Mike Frysinger 59e4be945b Blackfin: cm-bf527: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:07 -04:00
Mike Frysinger 8b219cf07c Blackfin: cm-bf548: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:07 -04:00
Mike Frysinger 9417d9a213 Blackfin: tcm-bf537: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:06 -04:00
Mike Frysinger e548321af0 Blackfin: cm-bf561: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:06 -04:00
Mike Frysinger 8a9bab08a6 Blackfin: cm-bf537e: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:05 -04:00
Mike Frysinger e82d8a1f02 Blackfin: cm-bf533: new board port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:04 -04:00
Mike Frysinger dd14af7640 Blackfin: new spibootldr command
Newer Blackfin parts can an on-chip ROM that can boot LDRs over SPI flashes,
so add a new 'spibootldr' command to take advantage of it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-14 20:01:04 -04:00
Grzegorz Bernacki 1260233982 digsy mtc: Add description to GPIO initial configuration.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2009-06-14 23:06:03 +02:00
Grzegorz Bernacki f1f66edfc7 digsy MTC: Add SPI support.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2009-06-14 23:03:57 +02:00
Grzegorz Bernacki 6325b7780d mpc52xx: Add SPI driver.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
2009-06-14 23:01:38 +02:00
Peter Tyser 6442b71b52 85xx: Add PORBMSR and PORDEVSR shift defines
Add defines similar to those already used for the the 86xx architecture.
This will ease sharing of PCI code between the 85xx and 86xx
architectures.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:20:52 -05:00
Peter Tyser 2f21ce4d54 fsl/85xx, 86xx: Sync up DMA code
The following changes were made to sync up the DMA code between the 85xx
and 86xx architectures which will make it easier to break out common
8xxx DMA code:

85xx:
- Don't set STRANSINT and SPCIORDER fields in SATR register.  These bits
  only have an affect when the SBPATMU bit is set.
- Write 0xffffffff instead of 0xfffffff to clear errors in the DMA
  status register.  We may as well clear all 32 bits of the register...

86xx:
- Add CONFIG_SYS_MPC86xx_DMA_ADDR define to address DMA registers
- Add clearing of errors in the DMA status register when initializing
  the controller
- Clear the channel start bit in the DMA mode register after a transfer

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:17:58 -05:00
Peter Tyser b1f12650d3 fsl: Create common fsl_dma.h for 85xx and 86xx cpus
Break out DMA structures for the Freescale MPC85xx and MPC86xx cpus to
reduce a large amount of code duplication

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:17:45 -05:00
Haiying Wang 3bd8e532b5 85xx: Add UEC6 and UEC8 at SGMII mode for MPC8569MDS
On MPC8569MDS board, UCC6 and UCC8 can be configured to work at SGMII mode via
UEM on PB board. Since MPC8569 supports up to 4 Gigabit Ethernet ports, we
disable UEC6 and UEC8 by default.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:17:02 -05:00
Haiying Wang f82107f637 85xx: Add RMII support for MPC8569MDS
This patch supports UCC working at RMII mode on PIB board, fixup fdt blob to
support rmii in kernel. It also changes the name of enable_mpc8569mds_qe_mdio to
enalbe_mpc8569mds_qe_uec which is  more accurate.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:17:01 -05:00
Haiying Wang 750098d33b 85xx: Add UEC3 and UEC4 support for MPC8569MDS
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:17:00 -05:00
Haiying Wang 4e7b25e4fe drivers/qe: Add more SNUM number for QE
Some QE chips like 8569 need more SNUM numbers for supporting 4 UECs in RGMII-
1000 mode.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:17:00 -05:00
Haiying Wang 7211fbfa18 drivers/qe: Change QE RISC ALLOCATION to support 4 RISCs
Also define the QE_RISC_ALLOCATION_RISCs to MACROs instead of using enum, and
define MAX_QE_RISC for QE based silicons.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:16:59 -05:00
Haiying Wang b3d7f20f43 85xx: Add QE clk support
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Acked-by: Timur Tabi <Timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:16:59 -05:00
Kumar Gala 71b358cc26 85xx: Added MPC8535/E identifiers
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:16:26 -05:00
Srikanth Srinivasan feb7838f97 85xx: Add P2020DS support
The patch adds support for P2020DS reference platform.
DDR3 interface uses hard-coded initialization rather than SPD
for now and was tested at 667Mhz. Some PIXIS register
definitions and associated code sections need to be fixed.
TSEC1/2/3, NOR flash, MAC/SYS ID EEPROM, PCIE1/2/3 are all
tested under u-boot.

Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Travis Wheatley <Travis.Wheatley@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-12 17:16:25 -05:00
Stefan Roese 229549a56d mpc512x: MPC5121ADS: Add NAND support
This patch adds NAND support to the MPC5121ADS board. Please
note that the image size increased since NAND support didn't
fit in the current image size (256k).

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
2009-06-12 20:47:19 +02:00
Stefan Roese e53b507cee mpc512x: Add esd gmbh mecp5123 board support
MECP5123 is a MPC5121E based module by esd gmbh.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2009-06-12 20:47:19 +02:00