Commit graph

42 commits

Author SHA1 Message Date
Tom Rini
219f4788d3 hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c
Exactly one board has defined CONFIG_SYS_PROMPT_HUSH_PS2 to a value
different than "> " which is vision2.  I have Cc'd the maintainer here
as I strongly suspect this is a bug rather than intentional behavior.

Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-06-20 20:36:51 +02:00
Wolfgang Denk
085ecde156 5xxx: Cleanup for partial linking and --gc-sections
Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
2010-11-27 23:35:11 +01:00
Wolfgang Denk
25ddd1fb0a Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new <asm-offsets.h> file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26 21:05:30 +02:00
Wolfgang Denk
553f09823c Rename CONFIG_SYS_INIT_RAM_END into CONFIG_SYS_INIT_RAM_SIZE
CONFIG_SYS_INIT_RAM_END was a misnomer as it suggests this might be
some end address; to make the meaning more clear we rename it into
CONFIG_SYS_INIT_RAM_SIZE

No other code changes are performed in this patch, only minor editing
of white space (due to the changed length) and the comments was done,
where noticed.

Note that the code for the PATI and cmi_mpc5xx board configurations
looks seriously broken.  Last known maintainers on Cc:

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Denis Peter <d.peter@mpl.ch>
Cc: Martin Winistoerfer <martinwinistoerfer@gmx.ch>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26 21:03:25 +02:00
Peter Tyser
d98b0523cf powerpc: Cleanup BOOTFLAG_* references
Now that warm booting is not supported, there isn't a need for the
BOOTFLAG_COLD and BOOTFLAG_WARM defines, so remove them.

Note that this change makes the board info bd_bootflags field useless.
It will always be set to 0, but we leave it around so that we don't
break the board info structure that some OSes are expecting to be passed
from U-Boot.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-10-18 22:38:56 +02:00
Wolfgang Denk
2ae1824196 Makefile: move all Power Architecture boards into boards.cfg
Clean up Makefile, and drop a lot of the config.mk files on the way.

We now also automatically pick all boards that are listed in
boards.cfg (and with all configurations), so we can drop the redundant
entries from MAKEALL to avoid building these twice.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-18 22:12:04 +02:00
Wolfgang Denk
14d0a02a16 Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE
The change is currently needed to be able to remove the board
configuration scripting from the top level Makefile and replace it by
a simple, table driven script.

Moving this configuration setting into the "CONFIG_*" name space is
also desirable because it is needed if we ever should move forward to
a Kconfig driven configuration system.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-18 22:07:10 +02:00
Wolfgang Denk
efd988ebaa mcc200: fix build error
Fix compile error:
include/configs/mcc200.h:401:6: error: #elif with no expression

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-10-19 09:18:57 +02:00
Ben Warren
86321fc112 net: removed board-specific CONFIGs from MPC5xxx FEC driver
Added new CONFIG options for the three type of MAC-PHY interconnect and
applied them all relevant board config files

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2009-02-09 23:01:40 -08:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Jean-Christophe PLAGNIOL-VILLARD
0e8d158664 rename CFG_ENV macros to CONFIG_ENV
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:06 +02:00
Jean-Christophe PLAGNIOL-VILLARD
5a1aceb068 rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:04 +02:00
Jean-Christophe PLAGNIOL-VILLARD
00b1883a4c drivers/mtd: Move conditional compilation to Makefile
rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-08-13 01:40:42 +02:00
Becky Bruce
31d8267224 PPC: Create and use CONFIG_HIGH_BATS
Change all code that conditionally operates on high bat
registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
instead of the myriad ways this is done now.  Define the option
for every config for which high bats are supported (and
enabled by early boot, on parts where they're not always
enabled)

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-03 17:48:41 +02:00
Detlev Zundel
a99715b8eb Realining some header definitions.
Signed-off-by: Detlev Zundel <dzu@denx.de>
2008-04-25 00:09:53 +02:00
Wolfgang Denk
32bf3d143a Fix quoting problem (preboot setting) in many board config files.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-03-03 12:37:53 +01:00
Wolfgang Denk
a4d2636f2a Adapt board configuration and fix kernel crash on MCC200 board.
The update procedure was modified to turn off the USB subsystem
before exit for MCC200 and TRAB. This is necessary as otherwise the
USB controller continues to write periodically to system memory!

MCC200-specific notes:
- the patch disables the magic key check for MCC200
- the patch contains the configuration changes made
  for the new revision of the board.

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-08-12 15:11:38 +02:00
Jon Loeliger
7f5c015774 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
used to be included but CONFIG_BOOTP_MASK was not defined.

Remove lingering references to CFG_CMD_* symbols.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 09:38:02 -05:00
Jon Loeliger
5dc11a5119 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-05 11:05:02 +02:00
Wolfgang Denk
19bf91f962 Merge with /home/tur/git/u-boot#motionpro 2007-05-28 01:11:11 +02:00
Bartlomiej Sieka
c99512d6bd MPC5xxx: Change names of defines related to IPB and PCI clocks.
Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
them does not cause PCI or IPB clocks to run at the specified speed.
Instead, they configure divisors used to calculate said clocks. This
patch renames the defines according to their real function.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
2007-05-27 16:53:43 +02:00
Sergei Poselenov
638dd1458b MCC200 update - add LCD Progress Indicator 2007-02-27 14:17:09 +01:00
Andrei Safronov
cdb97a6678 automatic update mechanism 2006-12-08 16:23:08 +01:00
Wolfgang Denk
360b410367 Fixed problems on PRS200 board caused by adding splash screen on MCC200 2006-09-03 18:17:46 +02:00
Wolfgang Denk
e8143e72e1 Add splashscreen support for MCC200 board. 2006-08-30 23:09:00 +02:00
Wolfgang Denk
0fd30252c8 Make the serial driver framework work with CONFIG_SERIAL_MULTI enabled 2006-08-30 23:02:10 +02:00
Wolfgang Denk
21a9cc028d Fix typo. 2006-08-29 10:49:11 +02:00
Wolfgang Denk
3b0ff842bf Fix typo in MCC200/PRS200 configuration 2006-08-25 11:47:06 +02:00
Wolfgang Denk
113f64e09a Update for MCC200 / PRS200 boards:
- auto-adjust console device for Linux.
- fix typos.
2006-08-25 01:38:04 +02:00
Wolfgang Denk
ed1cf8456f Updates for MCC200 / PRS200 boards:
- support for configurations with SDRAM or DDR memory,
- support for highboot and lowboot
- adjusting environment definitions
2006-08-24 00:26:42 +02:00
Wolfgang Denk
463764c893 Add debug console on COM12 for MCC200 board 2006-08-17 00:36:51 +02:00
Wolfgang Denk
d22d102808 Cleanup duplicate definitions in MCC200 config file. 2006-07-13 16:29:40 +02:00
Wolfgang Denk
87791f3bf2 MCC200 board: support console on any one of the Quad UART ports. 2006-07-11 00:23:54 +02:00
Wolfgang Denk
a874c8c65f MCC200: map the 2nd Quad UART into the processor's address space. 2006-07-06 22:31:16 +02:00
Wolfgang Denk
f149d8643e Fix lowboot support on MCC200 board 2006-05-05 00:59:28 +02:00
Wolfgang Denk
b81a4630a3 Fix Quad UART mapping on MCC200 board due to new HW revision 2006-04-13 16:35:22 +02:00
Wolfgang Denk
05d8dce9d0 Enable Quad UART om MCC200 board. 2006-03-23 17:10:30 +01:00
Wolfgang Denk
5725f94aac Cleanup MCC200 board configuration; omit non-existent stuff. 2006-03-21 01:58:07 +01:00
Wolfgang Denk
bfc81252c0 Minor code cleanup 2006-03-06 13:03:37 +01:00
Wolfgang Denk
82f2e33a8d Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
use hush shell.
2006-02-28 18:39:20 +01:00
Stefan Roese
58ad497833 Convert mcc200 to use common CFI flash driver
Patch by Stefan Roese, 28 Feb 2006
2006-02-28 15:33:28 +01:00
Wolfgang Denk
86ea5f93d7 Initial port to MCC200 board (work in progress)
Minimally modified patch by Bluetechnix, Vienna
2006-02-22 00:43:16 +01:00