Commit graph

27 commits

Author SHA1 Message Date
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Axel Lin
b98bfeb667 hwmon: lm63: Use ARRAY_SIZE at appropriate place
Signed-off-by: Axel Lin <axel.lin@ingics.com>
2013-06-26 10:26:06 -04:00
Heiko Schocher
780f13a9e1 hwmon: do not init sensors on startup
The U-Boot Design Principles[1] clearly say:

  Initialize devices only when they are needed within U-Boot, i.e. don't
  initialize the Ethernet interface(s) unless U-Boot performs a download
  over Ethernet; don't initialize any IDE or USB devices unless U-Boot
  actually tries to load files from these, etc. (and don't forget to
  shut down these devices after using them - otherwise nasty things may
  happen when you try to boot your OS).

So, do not initialize and read the sensors on startup.

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Holger Brunck <holger.brunck@keymile.com>
2011-08-04 23:30:38 +02:00
Dirk Eibach
31c1bdd93d hwmon: Extend lm63.c to support LM64
This patch adds support for the National LM64 temperature
sensor with integrated fan control to lm63.c.
Main difference between LM63 and LM64 is 16°C offset in sensor
readings.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
2011-05-12 23:01:34 +02:00
Sebastien Carlier
6d8962e814 Switch from archive libraries to partial linking
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
2010-11-17 21:02:18 +01:00
Jeff Dischler
7d85f1dc5c ds1621: Fix negative temperature readings
Fix bug where signed data was processed as unsigned.  The bug previously
resulted in negative temperature readings wrapping around, eg -10 became
245.

Signed-off-by: Jeff Dischler <jdischler@xes-inc.com>
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-10-06 23:01:22 +02:00
Peter Tyser
9a6c80b0cf ds1621: Clean up coding style
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-10-06 23:01:21 +02:00
Peter Tyser
c3e5fa0b53 ds1621: Poll for register write completion
Poll the ds1621 NV Memory Busy bit instead of waiting a static amount of
time for register writes.

Also add config retister bit defines.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-10-06 23:01:19 +02:00
Graeme Russ
8907b8dbc5 Misc ds1722 fixups
This patch is based on a patch submitted by Jean-Christophe PLAGNIOL-VILLARD
on 18th May 2008 as part of a general i386 / sc520 fixup which was never
applied

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2009-09-04 21:54:52 +02:00
Heiko Schocher
3426d65daa dtt, lm81: move unneccessary printf into a debug printf
Signed-off-by: Heiko Schocher <hs@denx.de>
2009-08-11 21:59:08 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Heiko Schocher
8e442df438 lm75: Make the LM75 MULTI_BUS compatible.
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:01 +02:00
Heiko Schocher
12f1678127 lm75: fix Codingstyle issues.
Signed-off-by: Heiko Schocher <hs@denx.de>
2008-10-18 21:54:01 +02:00
Dirk Eibach
1c6fe6eac7 hwmon: Add LM63 support
This patch adds support for the National LM63 temperature
sensor with integrated fan control. It's used on the GDSys
Neo board (405EP) which will be submitted later.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Acked-by: Stefan Roese <sr@denx.de>
2008-10-18 21:54:01 +02:00
Peter Tyser
81e612014c Remove CFG_EEPROM_PAGE* dependencies for temperature sensors
The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and
CFG_EEPROM_PAGE_WRITE_BITS in various temperature
sensor drivers are not necessary

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-10-14 14:39:56 +02:00
Victor Gallardo
9ebbb54f7a ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
and glacier.

Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
2008-09-10 11:08:45 +02:00
Wolfgang Denk
b734e5556a Minor code cleanup: keep lists sorted.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-08-18 23:50:20 +02:00
Ricardo Ribalda Delgado
d0039d4ed2 Add support for ADT7460 I2C monitor chip
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2008-08-18 23:47:01 +02:00
Michal Simek
18c8a28aad hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722
Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>
2008-07-13 15:35:02 +02:00
Michal Simek
6ecbb45bb0 hwmon: Cleaning hwmon devices
Clean Makefile
Move device specific values to driver for better reading

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>
2008-07-13 15:26:18 +02:00
Stefan Roese
4d91d1df2f DTT: Issue one-shot command on AD7414 (LM75 code) to read temp
On AD7414 the first value upon bootup is not read correctly.
This is most likely because of the 800ms update time of the
temp register in normal update mode. To get current values
each time we issue the "dtt" command including upon powerup
we switch into one-short mode.

This patch fixes the problem on AD7414 equipped boards (Sequoia,
Canyonlands etc), that temp value printed in the bootup log was
incorrect.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-06-03 21:00:00 +02:00
Larry Johnson
7754f33c6f LM73 bug fix for negative temperatures and cleanup
When the LM73 temperature sensor measures a temperature below 0 C, the
current driver does not perform sign extension, so the result returned is
512 C too high.  This patch fixes the problem, and does general cleanup
of the code.

Signed-off-by: Larry Johnson <lrj@acm.org>
2008-04-13 08:58:36 -07:00
Larry Johnson
d01b847c5c LM75 bug fix for negative temperatures
When the LM75 temperature sensor measures a temperature below 0 C, the
current driver does not perform sign extension, so the result returned is
256 C too high.  This patch fixes the problem.

Signed-off-by: Larry Johnson <lrj@acm.org>
2008-02-22 16:33:09 +01:00
Larry Johnson
92fa37eac5 Remove superfluous preprocessor conditionals from LM73 driver
(1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".

(2) Use conditional Makefile.o.

Signed-off-by: Larry Johnson <lrj@acm.org>
2008-01-12 00:26:47 +01:00
Larry Johnson
9e2c347151 Add driver for National Semiconductor LM73 temperature sensor
This driver is based on the driver for the LM75.

Signed-off-by: Larry Johnson <lrj@acm.org>
2007-12-27 19:35:35 +01:00
Stefan Roese
9caeaadf50 Merge commit 'u-boot/master' into for-1.3.1
Conflicts:

	drivers/rtc/Makefile
2007-12-11 11:34:54 +01:00
Jean-Christophe PLAGNIOL-VILLARD
f868cc5a50 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-25 23:28:50 +01:00