Commit graph

264 commits

Author SHA1 Message Date
Maxime Ripard
3d4ef38de2 sparse: Rename the file and header
The Android sparse image format is currently supported through a file
called aboot, which isn't really such a great name, since the sparse image
format is only used for transferring data with fastboot.

Rename the file and header to a file called "sparse", which also makes it
consistent with the header defining the image structures.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-12 13:18:59 -05:00
Maxime Ripard
bf8940d35b fastboot: Implement NAND backend
So far the fastboot code was only supporting MMC-backed devices for its
flashing operations (flash and erase).

Add a storage backend for NAND-backed devices.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-11-12 13:18:58 -05:00
Simon Glass
af6bbd4dae Move board_init_f_mem() into a common location
This function will be used by both SPL and U-Boot proper. So move it into
a common place. Also change the #ifdef so that the early malloc() area is
not set up in SPL if CONFIG_SYS_SPL_MALLOC_START is defined. In that case
it would never actually be used, and just chews up stack space.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-10-24 13:50:34 -04:00
Nishanth Menon
ddf56bc7e3 drivers: Introduce a simplified remoteproc framework
Many System on Chip(SoC) solutions are complex with multiple processors
on the same die dedicated to either general purpose of specialized
functions. Many examples do exist in today's SoCs from various vendors.
Typical examples are micro controllers such as an ARM M3/M0 doing a
offload of specific function such as event integration or power
management or controlling camera etc.

Traditionally, the responsibility of loading up such a processor with a
firmware and communication has been with a High Level Operating
System(HLOS) such as Linux. However, there exists classes of products
where Linux would need to expect services from such a processor or the
delay of Linux and operating system being able to load up such a
firmware is unacceptable.

To address these needs, we need some minimal capability to load such a
system and ensure it is started prior to an Operating System(Linux or
any other) is started up.

NOTE: This is NOT meant to be a solve-all solution, instead, it tries to
address certain class of SoCs and products that need such a solution.

A very simple model is introduced here as part of the initial support
that supports microcontrollers with internal memory (no MMU, no
execution from external memory, or specific image format needs). This
basic framework can then (hopefully) be extensible to other complex SoC
processor support as need be.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-22 14:18:38 -04:00
Codrin Ciubotariu
4ea54e3f23 common/cmd_ethsw: Add generic commands for Ethernet Switches
This patch creates a flexible parser for Ethernet Switch
configurations that should support complex commands.
The parser searches for predefined keywords in the command
and calls the proper function when a match is found.
Also, the parser allows for optional keywords, such as
"port", to apply the command on a port
or on all ports. For now, the defined commands are:
ethsw [port <port_no>] { enable | disable | show }

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-09-21 08:29:47 -07:00
Lukasz Majewski
c7ff552843 update: tftp: dfu: Extend update_tftp() function to support DFU
This code allows using DFU defined mediums for storing data received via
TFTP protocol.

It reuses and preserves functionality of legacy code at common/update.c.

The update_tftp() function now accepts parameters - namely medium device
name and its number (e.g. mmc 1).

Without this information passed old behavior is preserved.

Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-09-07 13:41:05 +02:00
Simon Glass
e76cb9272d dm: tpm: Add a 'tpmtest' command
These tests come from Chrome OS code. They are not particularly tidy but can
be useful for checking that the TPM is behaving correctly. Some knowledge of
TPM operation is required to use these.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Christophe Ricard<christophe-h.ricard@st.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2015-08-31 07:57:29 -06:00
Heiko Schocher
80402f34f8 spl, common, serial: build SPL without serial support
This patch enables building SPL without
CONFIG_SPL_SERIAL_SUPPORT support.

Signed-off-by: Heiko Schocher <hs@denx.de>
[trini: Ensure we build arch/arm/imx-common on mx28]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-12 20:47:13 -04:00
Simon Glass
f1a0bafb58 efi: Add a command to display the memory map
The EFI memory map is passed from the stub to U-Boot in a table. Add a
command to display it in a vaguely readable fashion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested on QEMU
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:07 -06:00
Przemyslaw Marczak
6262b72b8b dm: regulator: add regulator command
This command is based on driver model regulator's API.
The user interface provides:
- list UCLASS regulator devices
- show or [set] operating regulator device
- print constraints info
- print operating status
- print/[set] voltage value [uV] (force)
- print/[set] current value [uA]
- print/[set] operating mode id
- enable the regulator output
- disable the regulator output

The 'force' option can be used for setting the value which exceeds
the constraints min/max limits.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:37 -06:00
Przemyslaw Marczak
d89fdcf9cf dm: pmic: add pmic command
This is new command for the PMIC devices based on driver model PMIC API.
Command features are unchanged:
- list UCLASS pmic devices
- show or [set] operating pmic device (NEW)
- dump registers
- read byte of register at address
- write byte to register at address

The only one change for this command is 'dev' subcommand.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-05-14 18:49:37 -06:00
Simon Glass
8e2fac051a Add a 'cpu' command to print CPU information
Add a simple command which provides access to a list of available CPUs along
with descriptions and basic information.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-04-29 21:02:33 -06:00
Tom Rini
1733259d25 Merge branch 'master' of git://git.denx.de/u-boot-video 2015-04-20 09:13:52 -04:00
Sjoerd Simons
bacfb1df95 sandbox: Renamed sb command to host
As suggested by Simon Glass, rename the sb command to host but keep the
old sb command as an alias

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-19 14:45:57 -06:00
Hannes Petermaier
604c7d4a5a common/lcd_console: introduce display/framebuffer rotation
Sometimes, for example if the display is mounted in portrait mode or even if it
is mounted landscape but rotated by 180 degrees, we need to rotate our content
of the display respectively the framebuffer, so that user can read the messages
which are printed out.

For this we introduce the feature called "CONFIG_LCD_ROTATION", this may be
defined in the board-configuration if needed. After this the lcd_console will
be initialized with a given rotation from "vl_rot" out of "vidinfo_t" which is
provided by the board specific code.

If CONFIG_LCD_ROTATION is not defined, the console will be initialized with
0 degrees rotation.

Signed-off-by: Hannes Petermaier <hannes.petermaier@br-automation.com>
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
[agust: fixed 'struct vidinfo' has no member named 'vl_rot' errors]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2015-04-18 17:40:37 +02:00
Linus Walleij
4bb6650632 common/armflash: Support for ARM flash images
The ARM reference designs all use a special flash image format
that stores a footer (two versions exist) at the end of the last
erase block of the image in flash memory.

Version one of the footer is indicated by the magic number
0xA0FFFF9F at 12 bytes before the end of the flash block and
version two is indicated by the magic number 0x464F4F54 0x464C5348
(ASCII for "FLSHFOOT") in the very last 8 bytes of the erase block.

This command driver implements support for both versions of the
AFS images (the name comes from the Linux driver in drivers/mtd/afs.c)
and makes it possible to list images and load an image by name into
the memory with these commands:

afs - lists flash contents
afs load <image> - loads image to address indicated in the image
afs load <image> <addres> - loads image to a specified address

This image scheme is used on the ARM Integrator family, ARM
Versatile family, ARM RealView family (not yet supported in U-Boot)
and ARM Versatile Express family up to and including the new
Juno board for 64 bit development.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-10 11:54:08 -04:00
Tom Rini
0dac731d19 Merge branch 'master' of git://git.denx.de/u-boot-video
Conflicts:
	include/splash.h

Signed-off-by: Tom Rini <trini@ti.com>
2015-02-10 10:41:54 -05:00
Tom Rini
307367eaff Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-02-10 10:40:43 -05:00
Nikita Kiryanov
033167c4c5 lcd: dt: extract simplefb support
We now have api functions that can support compiling simplefb code as its own
module. Since this code is not part of the display functionality, extract it
to its own file.

Raspberry Pi is updated to accommodate the changes.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bo Shen <voice.shen@atmel.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>
2015-02-10 13:31:26 +01:00
Masahiro Yamada
0365ffcc0b generic-board: show model name in board_init_f() too
The common/board_r.c has show_model_r() to display the model name
if the DTB has a "model" property.  It sounds useful to have a similar
function in common/board_f.c too because most of the boards show
their board name before relocation.

Instead of implementing the same function in both common/board_f.c
and common/board_r.c, let's split it up into common/show_board_info.c.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:49 -07:00
Nikita Kiryanov
f82eb2fa5d common: convert compulab splash load code to common code
Move board/compulab/common/splash.c code to
common/splash_source.c to make it available for everybody. This move
renames cl_splash_screen_prepare() to splash_source_load(), and
the compilation of this code is conditional on CONFIG_SPLASH_SOURCE.

splash_source features:
* Provide a standardized way for declaring board specific splash screen
  locations
* Provide existing routines for auto loading the splash image from the
  locations as declared by the board
* Introduce the "splashsource" environment variable, which makes it
  possible to select the splash image source.

cm-t35 and cm-fx6 are updated to use the modified version.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-01-29 17:44:08 +01:00
Nikita Kiryanov
904672ee48 lcd: refactor lcd console stuff into its own file
common/lcd.c is a mix of code portions that do different but related
things. To improve modularity, the various code portions should be split
into their own modules. Separate lcd console code into its own file.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-01-10 17:53:59 +01:00
Alison Wang
ed39218238 common: spl: Add interactive DDR debugger support for SPL image
To support interactive DDR debugger, cli_simple.o, cli.o, cli_readline.o,
command.o, s_record.o, xyzModem.o and cmd_disk.o are all needed for
drivers/ddr/fsl/interactive.c.

In current common/Makefile, the above .o files are only produced when
CONFIG_SPL_BUILD is disabled.

For LS102xA, interactive DDR debugger is needed in SD/NAND boot too, and
I enabled CONFIG_FSL_DDR_INTERACTIVE. But according to the current
common/Makfile, all the above .o files are not produced in SPL part
because CONFIG_SPL_BUILD is enabled in SPL part, the following error
will be shown,

drivers/ddr/fsl/built-in.o: In function `fsl_ddr_interactive':
/home/wangh/layerscape/u-boot/drivers/ddr/fsl/interactive.c:1871:
undefined reference to `cli_readline_into_buffer'
/home/wangh/layerscape/u-boot/drivers/ddr/fsl/interactive.c:1873:
undefined reference to `cli_simple_parse_line'
make[1]: *** [spl/u-boot-spl] Error 1
make: *** [spl/u-boot-spl] Error 2

So this patch fixed this issue and the above .o files will be produced
no matter CONFIG_SPL_BUILD is enabled or disabled.

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-05 08:05:52 -08:00
Tom Rini
1739564e75 Merge git://git.denx.de/u-boot-dm
Conflicts:
	drivers/serial/serial-uclass.c

Signed-off-by: Tom Rini <trini@ti.com>
2014-11-24 12:01:48 -05:00
Christian Gmeiner
59e890ef7b fs: make it possible to read the filesystem UUID
Some filesystems have a UUID stored in its superblock. To
allow using root=UUID=... for the kernel command line we
need a way to read-out the filesystem UUID.

changes rfc -> v1:
 - make the environment variable an option parameter. If not
   given, the UUID is printed out. If given, it is stored in the env
   variable.
 - corrected typos
 - return error codes

changes v1 -> v2:
 - fix return code of do_fs_uuid(..)
 - document do_fs_uuid(..)
 - implement fs_uuid_unsuported(..) be more consistent with the
   way other optional functionality works

changes v2 -> v3:
 - change ext4fs_uuid(..) to make use of #if .. #else .. #endif
   construct to get rid of unreachable code

Hit any key to stop autoboot:  0
=> fsuuid
fsuuid - Look up a filesystem UUID

Usage:
fsuuid <interface> <dev>:<part>
    - print filesystem UUID
fsuuid <interface> <dev>:<part> <varname>
    - set environment variable to filesystem UUID

=> fsuuid mmc 0:1
d9f9fc05-45ae-4a36-a616-fccce0e4f887
=> fsuuid mmc 0:2
eb3db83c-7b28-499f-95ce-9e0bb21cda81
=> fsuuid mmc 0:1 uuid1
=> fsuuid mmc 0:2 uuid2
=> printenv uuid1
uuid1=d9f9fc05-45ae-4a36-a616-fccce0e4f887
=> printenv uuid2
uuid2=eb3db83c-7b28-499f-95ce-9e0bb21cda81
=>

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2014-11-23 06:49:01 -05:00
Simon Glass
c9356be307 dm: Split the simple malloc() implementation into its own file
The simple malloc() implementation is used when memory is tight. It provides
a simple buffer with an incrementing pointer.

At present the implementation is inside dlmalloc. Move it into its own file
so that it is easier to find.

Rather than using relocation as a signal that the full malloc() is
available, add a special GD_FLG_FULL_MALLOC_INIT flag. This signals that the
simple malloc() should no longer be used.

In some cases, such as SPL, even the code space used by the full malloc() is
wasteful. Add a CONFIG_SYS_MALLOC_SIMPLE option to provide only the simple
malloc. In this case the full malloc is not available at all. It saves about
1KB of code space and about 0.5KB of data on Thumb 2.

Acked-by: Tom Rini <trini@ti.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-21 08:12:28 +01:00
Felipe Balbi
41f1d40d92 common: Makefile: allow for spl builds with env_fat
If CONFIG_SPL_BUILD and CONFIG_ENV_IS_IN_FAT are
defined, u-boot spl will fail to build. Fix that.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-10-23 11:53:01 -04:00
Ruchika Gupta
c5de15cbc8 crypto/fsl: Add command for encapsulating/decapsulating blobs
Freescale's SEC block has built-in Blob Protocol which provides
a method for protecting user-defined data across system power
cycles. SEC block protects data in a data structure called a Blob,
which provides both confidentiality and integrity protection.

Encapsulating data as a blob
Each time that the Blob Protocol is used to protect data, a
different randomly generated key is used to encrypt the data.
This random key is itself encrypted using a key which is derived
from SoC's non volatile secret key and a 16 bit Key identifier.
The resulting encrypted key along with encrypted data is called a blob.
The non volatile secure key is available for use only during secure boot.

During decapsulation, the reverse process is performed to get back
the original data.

Commands added
--------------
    blob enc - encapsulating data as a cryptgraphic blob
    blob dec - decapsulating cryptgraphic blob to get the data

Commands Syntax
---------------
	blob enc src dst len km

	Encapsulate and create blob of data $len bytes long
	at address $src and store the result at address $dst.
	$km is the 16 byte key modifier is also required for
	generation/use as key for cryptographic operation. Key
	modifier should be 16 byte long.

	blob dec src dst len km

	Decapsulate the  blob of data at address $src and
	store result of $len byte at addr $dst.
	$km is the 16 byte key modifier is also required for
	generation/use as key for cryptographic operation. Key
	modifier should be 16 byte long.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-10-16 14:20:40 -07:00
Masahiro Yamada
f494e0a184 kbuild: refactor some makefiles
[1] Move driver/core/, driver/input/ and drivers/input/ entries
    from the top Makefile to drivers/Makefile

[2] Remove the conditional by CONFIG_DM in drivers/core/Makefile
    because the whole drivers/core directory is already selected
    by CONFIG_DM in the upper level

[3] Likewise for CONFIG_DM_DEMO in drivers/demo/Makefile

[4] Simplify common/Makefile - both CONFIG_DDR_SPD and
    CONFIG_SPD_EEPROM are boolean macros so they can directly
    select objects

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Marek Vasut <marex@denx.de>
2014-09-24 18:30:29 -04:00
Steve Rae
e5bf9878ea usb/gadget: fastboot: implement sparse format
- add capability to "fastboot flash" with sparse format images

Signed-off-by: Steve Rae <srae@broadcom.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
2014-09-24 18:30:27 -04:00
Steve Rae
c0aebb3382 usb/gadget: fastboot: add eMMC support for flash command
- add support for 'fastboot flash' command for eMMC devices

Signed-off-by: Steve Rae <srae@broadcom.com>
2014-09-24 18:30:27 -04:00
Tom Rini
00e385325f common/Makefile: Consolidate SPL ENV options, correct inclusion
CONFIG_SPL_NET_SUPPORT is not the only time we want SPL to ahve
environment, CONFIG_SPL_ENV_SUPPORT is when we want it.

Signed-off-by: Tom Rini <trini@ti.com>
2014-08-25 08:52:34 -04:00
Simon Glass
aa53233a15 Add an I/O tracing feature
When debugging drivers it is useful to see what I/O accesses were done
and in what order.

Even if the individual accesses are of little interest it can be useful to
verify that the access pattern is consistent each time an operation is
performed. In this case a checksum can be used to characterise the operation
of a driver. The checksum can be compared across different runs of the
operation to verify that the driver is working properly.

In particular, when performing major refactoring of the driver, where the
access pattern should not change, the checksum provides assurance that the
refactoring work has not broken the driver.

Add an I/O tracing feature and associated commands to provide this facility.
It works by sneaking into the io.h heder for an architecture and redirecting
I/O accesses through its tracing mechanism.

For now no commands are provided to examine the trace buffer. The format is
fairly simple, so 'md' is a reasonable substitute.

Note: The checksum feature is only useful for I/O regions where the contents
do not change outside of software control. Where this is not suitable you can
fall back to manually comparing the addresses. It might be useful to enhance
tracing to only checksum the accesses and not the data read/written.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-20 11:54:29 -06:00
Simon Glass
b639640371 bootm: Split out code from cmd_bootm.c
This file has code in three different categories:
- Command processing
- OS-specific boot code
- Locating images and setting up to boot

Only the first category really belongs in a file called cmd_bootm.c.

Leave the command processing code where it is. Split out the OS-specific
boot code into bootm_os.c. Split out the other code into bootm.c

Header files and extern declarations are tidied but otherwise no code
changes are made, to make it easier to review.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-06-19 11:18:58 -04:00
Simon Glass
0098e179e1 Move bootretry code into bootretry.c and clean up
This code is only used by one board, so it seems a shame to clutter up
the readline code with it. Move it into its own file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-05-29 17:48:21 -04:00
Simon Glass
30354978ff Move command line API into cli.c
We now have a single entry point to the CLI, whether simple or hush. Put
this in its own file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-05-29 17:48:21 -04:00
Simon Glass
66ded17dfc Move autoboot code to autoboot.c
The autoboot code is complex and long. It deserves its own file with
a simple interface from main.c.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-05-29 17:45:31 -04:00
Simon Glass
6493ccc7cf Split out simple parser and readline into separate files
It doesn't make sense to have the simple parser and the readline code
all in main. Split them out into separate files.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-05-29 17:45:31 -04:00
Simon Glass
eca86fad3d Rename hush to cli_hush
Hush is a command-line interpreter, so rename it to make that clearer.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-05-29 17:45:31 -04:00
Sebastian Siewior
3aab70afc5 usb/gadget: add the fastboot gadget
This patch contains an implementation of the fastboot protocol on the
device side and documentation. This is based on USB download gadget
infrastructure. The fastboot function implements the getvar, reboot,
download and reboot commands. What is missing is the flash handling i.e.
writting the image to media.

v3 (Rob Herring):
This is based on http://patchwork.ozlabs.org/patch/126798/ with the
following changes:
- Rebase to current mainline and updates for current gadget API
- Use SPDX identifiers for licenses
- Traced the history and added missing copyright to cmd_fastboot.c
- Use load_addr/load_size for transfer buffer
- Allow vendor strings to be optional
- Set vendor/product ID from config defines
- Allow Ctrl-C to exit fastboot mode
v4:
- Major re-write to use the USB download gadget. Consolidated function
code to a single file.
- Moved globals into single struct.
- Use puts and putc as appropriate.
- Added CONFIG_USB_FASTBOOT_BUF_ADDR and CONFIG_USB_FASTBOOT_BUF_SIZE to
set the fastboot transfer buffer.
v5:
- Add CONFIG option documentation to README
- Rebase using new downloader registration

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
2014-05-08 10:38:30 +02:00
Sebastian Siewior
9ace3fc814 image: add support for Android's boot image format
This patch adds support for the Android boot-image format. The header
file is from the Android project and got slightly alterted so the struct +
its defines are not generic but have something like a namespace. The
header file is from bootloader/legacy/include/boot/bootimg.h. The header
parsing has been written from scratch and I looked at
bootloader/legacy/usbloader/usbloader.c for some details.
The image contains the physical address (load address) of the kernel and
ramdisk. This address is considered only for the kernel image.
The "second image" defined in the image header is currently not
supported. I haven't found anything that is creating this.

v3 (Rob Herring):
This is based on http://patchwork.ozlabs.org/patch/126797/ with the
following changes:
- Rebased to current mainline
- Moved android image handling to separate functions in
  common/image-android.c
- s/u8/char/ in header to fix string function warnings
- Use SPDX identifiers for licenses
- Cleaned-up file source information:
  android_image.h is from file include/boot/bootimg.h in repository:
  https://android.googlesource.com/platform/bootable/bootloader/legacy
  The git commit hash is 4205b865141ff2e255fe1d3bd16de18e217ef06a
  usbloader.c would be from the same commit, but it does not appear
  to have been used for any actual code.
v4:
- s/andriod/android/
- Use a separate flag ep_found to track if the entry point has been set
rather than using a magic value.

Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tom Rini <trini@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2014-05-08 10:38:29 +02:00
Tom Rini
0f507779ca Merge branch 'next' 2014-04-17 14:33:25 -04:00
Patrice Bouchand
5527f832c0 Add lzmadec command
I needed to be able to uncompress lzma files. I did this command
based on unzip command and propose it if it could help.

Signed-off-by: Patrice Bouchand <pbfwdlist@gmail.com>
Changed to work with sandbox
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-22 14:47:22 -06:00
Marek Vasut
b401b73d02 aes: Add 'aes' command to access AES-128-CBC
Add simple 'aes' command, which allows using the AES-128-CBC encryption
and decryption functions from U-Boot command line.

Signed-off-by: Marek Vasut <marex@denx.de>
2014-03-21 16:43:58 -04:00
Vadim Bendebury
41364f0fbe cros_ec: Move EC interface into common library
Add a common library for obtaining access to the Chrome OS EC. This is
used by boards which need to talk to the EC.

Reviewed-by: Vadim Bendebury <vbendeb@google.com>
Tested-by: Vadim Bendebury <vbendeb@google.com>
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-17 20:05:46 -06:00
Simon Glass
39f7611fec dm: Add a demonstration/example driver
As an example of how to write a uclass and a driver, provide a demo version
of each, accessible through the 'demo' command.

To use these with driver model, define CONFIG_CMD_DEMO and CONFIG_DM_DEMO.

The two demo drivers are enabled with CONFIG_DM_DEMO_SIMPLE and
CONFIG_DM_DEMO_SHAPE.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: Viktor Křivák <viktor.krivak@gmail.com>
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
2014-03-04 12:15:29 -05:00
Tom Rini
eeb72e6761 Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
	arch/arm/cpu/armv7/config.mk
	board/ti/am43xx/mux.c
	include/configs/am43xx_evm.h

Signed-off-by: Tom Rini <trini@ti.com>
2014-02-26 16:49:58 -05:00
Tom Rini
1551df35f2 arm: Switch to -mno-unaligned-access when supported by the compiler
When we tell the compiler to optimize for ARMv7 (and ARMv6 for that
matter) it assumes a default of SCTRL.A being cleared and unaligned
accesses being allowed and fast at the hardware level.  We set this bit
and must pass along -mno-unaligned-access so that the compiler will
still breakdown accesses and not trigger a data abort.

To better help understand the requirements of the project with respect
to unaligned memory access, the
Documentation/unaligned-memory-access.txt file has been added as
doc/README.unaligned-memory-access.txt and is taken from the v3.14-rc1
tag of the kernel.

Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tom Rini <trini@ti.com>
2014-02-26 21:19:32 +01:00
Tom Rini
1530f6f51a fs/fdos: Remove
We have an unused FAT implementation in fs/fdos, remove.

Signed-off-by: Tom Rini <trini@ti.com>
2014-02-21 08:42:47 -05:00
Masahiro Yamada
6825a95b0b kbuild: use Linux Kernel build scripts
Now we are ready to switch over to real Kbuild.

This commit disables temporary scripts:
  scripts/{Makefile.build.tmp, Makefile.host.tmp}
and enables real Kbuild scripts:
  scripts/{Makefile.build,Makefile.host,Makefile.lib}.

This switch is triggered by the line in scripts/Kbuild.include
  -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build.tmp obj
  +build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj

We need to adjust some build scripts for U-Boot.
But smaller amount of modification is preferable.

Additionally, we need to fix compiler flags which are
locally added or removed.

In Kbuild, it is not allowed to change CFLAGS locally.
Instead, ccflags-y, asflags-y, cppflags-y,
CFLAGS_$(basetarget).o, CFLAGS_REMOVE_$(basetarget).o
are prepared for that purpose.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Gerhard Sittig <gsi@denx.de>
2014-02-19 11:07:50 -05:00