Commit graph

11 commits

Author SHA1 Message Date
Simon Glass
c51212332a exynos: Drop old exynos5420-specific board code
Now that exynos5420 boards can use the generic exynos5 code, switch over to
it and remove the old code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-08-05 21:06:16 -06:00
Simon Glass
bf637ea5e4 exynos: config: Move common options to the common headers and tidy up
Many options are duplicated on the exynos5 boards. Move these to the common
files. Also some options are not used so can be removed.

Tidy this up to make the files easier to maintain.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-08-05 21:06:16 -06:00
Simon Glass
3db02b1b31 exynos: cros_ec: Drop unnecessary init
Since driver model will probe the EC when it is first used, we do not
need to init it explicitly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:15 -06:00
Akshay Saraswat
1a8aae9b94 Exynos542x: Config: Add various configs
This patch adds "iRAM, CPU state and low power" configs
which are the addresses acting as flag registers.

iROM code checks CONFIG_LOWPOWER_FLAG address. If it is equal
to CONFIG_LOWPOWER_EN then it jumps to the address (0x02020000+CPUID*4).
This is a part of iROM logic. Rest other flags are being used at
various places during kernel switching and reset.
They are nowhere documented because they are part programming.
These configs are serving as flags for us because they are
representing the addresses in iRAM which we are using for
storing and extracting CPU Status and GIC status.

Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-02-28 18:03:46 +09:00
Sjoerd Simons
6622378786 Exynos: Move down common USB configuration
USB is a pretty common feature on exynos 5 board, so it seems sensible
to configure it directly from exynos5-common. As a side-effect this
makes USB available from u-boot on exynos 5420 based boards.

While there enable support for common USB ethernet cards to make it more
likely the default config allows booting for network and enable XHCI on
SMDK5420 which has it defined in the dts but not in its config.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-30 17:04:02 +09:00
Hyungwon Hwang
43900da886 config: exynos5420: move non common configs to specific board files
The media for boot and environment is a board-specific feature, not a
processor-specific. This is same to console port number and  some
other addresses. This patch moves the that kinds of configs to each
board-specific files from the common config file for Exynos5420.

Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-22 20:37:10 +09:00
Ian Campbell
e6825e0362 exynos5: Use config_distro_bootcmd.h
This replaces the existing CONFIG_BOOTCOMMAND for exynos5250 and 5420.

exynos4 platforms seem to have existing complex extra env configuration for
booting and so are excluded here. Hence the bootcmd.h is added to
exynos5-common.h.

I have build tested on all exynos platforms (MAKEALL -s exynos), but only boot
tested on arndale.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Guillaume GARDET <guillaume.gardet@free.fr>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-11-17 19:11:03 +09:00
Akshay Saraswat
43581c8338 Config: Exynos5420: Refactor SDRAM Bank and Size
Since, not every board may have all memory channels configured
and all available banks of DMC used, we wish to refactor configs
for Memory Bank size and numbers as per board memory config.
For Example, Peach-Pit has 2GB memory and will be using only 4 banks
but Peach-Pi has 3.5GB memory and will be using all 7 available
SDRAM banks.

Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-11-17 19:03:38 +09:00
Akshay Saraswat
79043d84da Config: Exynos5800: Enable build for Peach-Pi
This adds following things :
- New config and defconfig for Peach-Pi board.
- Alterations in Kconfig and MAINTAINERS.
- Addition of CONFIG_EXYNOS5800.
- ADdition of exynos5800-peach-pi in dts list.

Signed-off-by: Akshay Saraswat <akshay.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-11-17 19:03:38 +09:00
Simon Glass
f94de733df config: Move arndale to use common exynos5250 file
Most of the arndale features are common with other exynos5250 boards. To
permit easier addition of driver model support, use the common file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-10-08 17:25:47 +09:00
Simon Glass
87033d4d97 exynos: Move common smdk5420 things to common file
A few things are common but are not in the common file. Fix this and
rename the file to fit with the other exynos*-common files.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-10-08 17:25:47 +09:00
Renamed from include/configs/exynos5420.h (Browse further)