Commit graph

44 commits

Author SHA1 Message Date
Alexander Graf
7985cdf74b arm64: Remove non-full-va map code
By now the code to only have a single page table level with 64k page
size and 42 bit address space is no longer used by any board in tree,
so we can safely remove it.

To clean up code, move the layerscape mmu code to the new defines,
removing redundant field definitions.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-15 15:13:10 -04:00
Alexander Graf
96519f31cb zymqmp: Replace home grown mmu code with generic table approach
Now that we have nice table driven page table creating code that gives
us everything we need, move to that.

Signed-off-by: Alexander Graf <agraf@suse.de>
2016-03-15 15:13:03 -04:00
Simon Glass
69e173eb57 Move CONFIG_OF_LIBFDT to Kconfig
Move this option to Kconfig and tidy up existing boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-03-14 14:50:25 -04:00
Michal Simek
636ac181fa ARM: zynq: zynqmp: Enable DCC serial driver by default
Compile DCC serial driver by default.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-25 19:06:37 -05:00
Michal Simek
ce0335f2b4 mmc: Kconfig: Add Arasan SDHCI entry
Add Arasan SDHCI entry to Kconfig and fix all references.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-02-22 16:21:02 +01:00
Siva Durga Prasad Paladugu
78cb965af0 zynqmp: nand: Add Nand driver support for zynqmp
Add nand driver support for zynqmp. The Nand
controller used in ZynqMP is Arasan Nand Flash
controller.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
[scottwood: Fix checkpatch warning]
Signed-off-by: Scott Wood <oss@buserror.net>
2016-02-12 17:27:28 -06:00
Siva Durga Prasad Paladugu
e2928f32e0 ARM64: zynqmp: Define auto negotiation timeout
Define auto negotiation timeout as 20secs
the default 4secs might not be sufficient
always and hence defined for worst case.
It is observed that autoneg takes moretime
if connected to outside network and hence
increase it to 20secs.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:58 +01:00
Michal Simek
0cf0ef6af9 ARM64: zynqmp: Do not setup bootargs
Bootargs will be taken from DTS files.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:58 +01:00
Siva Durga Prasad Paladugu
0e43140bb1 ARM64: zynqmp: Dont use shortcut for setenv
Dont use shortcut command for setenv as
it wont work now due introduction of new
command setexpr.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:57 +01:00
Siva Durga Prasad Paladugu
1b19daf407 ARM64: zynqmp: Modify the autoboot commands
Modify DFU commands to use latest kernel offsets and sizes
as per modified partitions in the linux device tree.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:57 +01:00
Michal Simek
c4c96f2b3f ARM64: zynqmp: Include GbE speed/duplex detection
Get right speed/duplex via mii info.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:57 +01:00
Michal Simek
f96fe2c0a8 ARM64: zynqmp: Enable NATSEMI phys
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:57 +01:00
Michal Simek
15c3eb53a9 ARM64: zynqmp: Allow overwrite identification string
Keep default option there but allow overwrite it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:57 +01:00
Michal Simek
713b616459 ARM64: zynqmp: Setup correct COUNTER_FREQUENCY for silicon
When U-Boot runs from EL3 system timer is setup based on this macro.
Software default freq for silicon is 100MHz but enable opton to rewrite
it. Emulation platform is using 4MHz.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:57 +01:00
Michal Simek
99cb9ce029 ARM64: zynqmp: Move memory setup to board file
Setup memory size for ep108 in ep108 config file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:57 +01:00
Michal Simek
d759512fc2 ARM64: zynqmp: Enable advance memory test by default
Temp space in at the beginning of OCM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:57 +01:00
Michal Simek
2d9925bce3 ARM64: zynqmp: Fix bootmode SD_MODE1
When only sdhci1 IP is enabled and SD_MODE1 bootmode is selected
U-Boot using sdboot1 variable which refers to mmc dev 1.
But this device doesn't exist because only one controller is available.

This patch fix logic around sdboot mode with using sdbootdev internal
variable.

Reported-by: Chris Kohn <ckohn@xilinx.com>
Acked-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27 15:55:57 +01:00
Michal Simek
7bccc75a2b net: gem: Add driver dependencies to PHYLIB
Clear driver dependecies via Kconfig. Remove PHYLIB dependency from
the driver.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-18 13:15:58 +01:00
Tom Rini
dcf4cb068e Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze 2015-12-07 08:13:02 -05:00
Michal Simek
a7159e204b ARM64: zynqmp: Enable FIT config option via Kconfig
Remove configuration options from board file.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-07 10:14:29 +01:00
Michal Simek
596e5782e7 net: gem: Move gem to Kconfig
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-12-07 10:14:28 +01:00
Siva Durga Prasad Paladugu
0f676767b6 usb: zynqmp: Enable USB XHCI support
Enable USB XHCI support for ZynqMP

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2015-12-07 00:14:59 +01:00
Bin Meng
68d5342017 sf: Move SPI flash drivers to defconfig
There are already Kconfig options for SPI flash drivers, but we
have not moved them from config.h to defconfig files. This commit
does this in a batch.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-25 10:06:05 -05:00
Michal Simek
f3bd72801a zynq: sdhci: Define max clock by macro
zc1571 with silicon can operate on 200MHz maximum frequency. Setup this
frequency by default and fix setting for ep108.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-19 14:03:05 +01:00
Michal Simek
bf146325a3 ARM64: zynqmp: Enable TI phy by default
Enable TI phy for Xilinx ZynqMP platform.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-19 13:09:21 +01:00
Simon Glass
42800ffa79 arm: zynq: Move serial driver to driver model
Update this driver to use driver model and change all users.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04 14:49:53 +01:00
Masahiro Yamada
09f3ca3dd5 arm, powerpc: select SYS_GENERIC_BOARD
We have finished Generic Board conversion for ARM and PowerPC, i.e.
all the boards have been converted except OpenRISC, SuperH, SPARC,
which have not supported Generic Board framework yet.

Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro
defines in include/configs/*.h.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-10-24 13:50:38 -04:00
Bin Meng
a726075911 cmd: Convert CONFIG_CMD_ELF to Kconfig
Convert CONFIG_CMD_ELF to Kconfig and tidy up affected boards.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21 07:46:25 -06:00
Siva Durga Prasad Paladugu
16fa00a711 zynqmp: usb: Add usb dwc3 driver support for zynqmp
Added usb dwc3 driver support for zynqmp
this also supports the DFU and LTHOR to download
the linux images on to RAM and cen be booted from
those linux images.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19 11:27:30 +02:00
Nikita Kiryanov
181bd9dc61 kconfig: add config option for shell prompt
Add option to set shell prompt string from menuconfig and migrate
boards globally.

The migration is done as follows:
- Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the
  entry moved to their defconfig files.
- Boards that defined some kind of #ifdef logic which selects the
  CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT
  right before the #ifdef logic and were left alone.
- This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus
  CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h
  files. This results in a streamlined default value across platforms, and
  includes the following files: spear-common, sunxi-common, mv-common,
  ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common.
- Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were
  not updated in their respective defconfig files under the assumption that
  since they did not explicitly define a value, they're fine with whatever
  the default is.
- On the other hand, boards that relied on a value defined in some
  <boards>_common.h file such as woodburn_common, rpi-common,
  bur_am335x_common, ls2085a_common, siemens_am33x_common, and
  omap3_evm_common, had their values moved to the respective defconfig files.
- The define V_PROMPT was removed, since it is not used anywhere except for
  assigning a value for CONFIG_SYS_PROMPT.

Cc: Tom Rini <trini@konsulko.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
[trini: Add spring, sniper, smartweb to conversion]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-08-13 07:19:33 -04:00
Michal Simek
6fe6f13509 ARM: zynqmp: Wire up SATA for the board
Enable SATA for the ZynqMP targets.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:27 +02:00
Michal Simek
cb7ea82059 ARM: zynqmp: Wire up ethernet controllers
Wire up ethernet controllers and enable MII and BOOTP options.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:27 +02:00
Siva Durga Prasad Paladugu
b0d18beedb zynqmp: Provide option to enable uart dcc support for zynqmp
Provide option to enable uart dcc support for zynqmp
This config can be enabled as per board config file.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:20 +02:00
Siva Durga Prasad Paladugu
f994bdfe13 Kconfig: zynqmp: Move CONFIG_SYS_TEXT_BASE to defconfig
Move CONFIG_SYS_TEXT_BASE of ZynqMP_ep to its
respective defconfig

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:19 +02:00
Siva Durga Prasad Paladugu
0b54a9dd09 zynqmp: Define ep config for ZynqMP
Define a new config "zynqmp_ep" for ZynqMP instead
of xilinx_zynqmp. This defconfig supports all emulation
platforms of ZynqMP. Also renamed TARGET_XILINX_ZYNQMP
to ARCH_ZYNQMP.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:19 +02:00
Joe Hershberger
ef0f2f5752 Move defaults from config_cmd_default.h to Kconfig
This sets the default commands Kconfig to match
include/config_cmd_default.h commands in the common/Kconfig and removes
them from include/configs.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-25 22:18:34 -04:00
Joe Hershberger
c9bb942e2f Move default y configs out of arch/board Kconfig
Some archs/boards specify their own default by pre-defining the config
which causes the Kconfig system to mix up the order of the configs in
the defconfigs... This will cause merge pain if allowed to proliferate.

Remove the configs that behave this way from the archs.

A few configs still remain, but that is because they only exist as
defaults and do not have a proper Kconfig entry. Those appear to be:

SPIFLASH
DISPLAY_BOARDINFO

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-25 22:17:55 -04:00
Michal Simek
31137acb27 zynqmp: Enable SDHCI0 options
Enable SDHCI0 for zynqmp.
Add empty gpio.h because of sdhci requirement.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29 11:19:04 +02:00
Siva Durga Prasad Paladugu
5af37bd070 zynqmp: Enable FS_GENERIC option
Provide an option to write filesystem independend commands.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29 11:19:04 +02:00
Siva Durga Prasad Paladugu
48d7260d19 zynqmp: Add SPI driver support for ZynqMP
Added the SPI driver support for ZynqMP
The controller is same as zynq SPI controller

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2015-04-29 11:19:04 +02:00
Siva Durga Prasad Paladugu
2594e03c64 zynqmp: i2c: Enable i2c driver for zynqMP
Enable the i2c driver for ZynqMP
Also enable the eeprom for read and writes
to eeprom on ZynqMP
ZynqMP uses the same i2c controller as in Zynq

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29 11:19:04 +02:00
Michal Simek
5cb2420037 zynqmp: Add support for R5 sw loading
Add support for loading sw for R5 with enabling for zynqmp.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
2015-04-29 11:19:03 +02:00
Siva Durga Prasad Paladugu
222b212937 zynqmp: caches: Enable dcache for zynqmp
Define the mmu table till 2MB granularity
enable dcaches for zynqmp.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-04-29 11:19:02 +02:00
Michal Simek
84c7204bd1 arm64: Add Xilinx ZynqMP support
Add basic Xilinx ZynqMP arm64 support.
Serial and SD is supported.
It supports emulation platfrom ep108 and QEMU.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-03-02 18:41:54 +01:00