Commit graph

22 commits

Author SHA1 Message Date
Simon Glass
24b852a7a2 Move console definitions into a new console.h file
The console includes a global variable and several functions that are only
used by a small subset of U-Boot files. Before adding more functions, move
the definitions into their own header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:50 -07:00
Sonic Zhang
d6a320d5bb blackfin: add spi and i2c specific get clock functions
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2014-02-20 06:46:56 +01:00
Axel Lin
727cbe14b2 spi: bfin_spi: Remove unnecessary test for bus and pins[bus]
For invalid bus number, current code returns NULL in the default case of
switch-case statements. In additional, pins[bus] is always not NULL because
it is the address of specific row of the two-dimensional array.
Thus this patch removes these unnecessary test.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-12-06 16:06:51 +08:00
Jagannadha Sutradharudu Teki
e7b1e452ff spi: Add GPL-2.0+ SPDX-License-Identifier for missing files
Added GPL-2.0+ SPDX-License-Identifier for missed spi
source files.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2013-10-16 00:14:01 +05:30
Axel Lin
327b5c9f7c spi: bfin_spi: Use DIV_ROUND_UP instead of open-coded
Use DIV_ROUND_UP to simplify the code.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-07-31 16:56:04 +08:00
Scott Jiang
d4d4f90377 bfin: discard invalid data and clear RXS in bf5xx spi driver
There may be dirty data in RDBR, so we should discard invalid data.
This operation also clears RXS bit in STAT register.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13 16:26:27 +08:00
Scott Jiang
e76276df74 bfin: Remove spi dma function in bf5xx.
BF5xx rx dma causes spi flash random read error.
Accually spi controller has problems both on tx and rx dma.
So remove spi dma support in u-boot.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
2013-05-13 16:26:27 +08:00
Simon Glass
d3504fee73 spi: Use spi_alloc_slave() in each SPI driver
Rather than each driver having its own way to allocate a SPI slave,
use the new allocation function everywhere. This will make it easier
to extend the interface without breaking drivers.

Signed-off-by: Simon Glass <sjg@chromium.org>
2013-03-19 08:45:36 -07:00
Mike Frysinger
e2f014503e Blackfin: bfin_spi: fix build error when DEBUG is defined
The new debug() changes pointed out debug code that rotted a little.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-16 14:22:19 -04:00
Thomas Chou
6c3eb43a0f bfin_spi: add spi_set_speed
The new speed will be applied by spi_claim_bus.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-25 01:45:42 -04:00
Mike Frysinger
cca07417d5 Blackfin: BF50x: new processor port
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:26 -04:00
Mike Frysinger
6f070e1867 Blackfin: bfin_spi: add optional DMA support
This moves the last piece from the old spi_flash driver to the new SPI
framework -- optional DMA RX support.  This typically cuts speeds by ~40%
at the cost of additional ~300 bytes.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-02 16:00:36 -04:00
Mike Frysinger
55fed6fd0b Blackfin: bfin_spi: use same gpio cs define as Linux
Linux uses an offset of 8 to switch from hardware cs to a gpio cs,
so have u-boot use the same value.  Also make sure it is public
for boards to access.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-09-21 18:22:14 -04:00
Mike Frysinger
37a4b75d4c Blackfin: bfin_spi: support gpios as chip selects
Rather than only support the pins dedicated as chip selects, utilize the
gpio framework to support any gpio pin.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13 17:50:50 -04:00
Mike Frysinger
f3732edf46 Blackfin: bfin_spi: convert to portmux framework
Rather than bang MMRs directly, use the new portmux framework to handle
the details.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-07-13 17:50:50 -04:00
Cliff Cai
581d92eefc Blackfin: bfin_spi: round up clock divider
If the requested clock cannot be exactly obtained, round it up so that we
err on the side of slightly slower rather than slightly faster.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:27 -05:00
Cliff Cai
17ebd5bf33 Blackfin: bfin_spi: let boards control idle value
Some SPI devices like to see high idle values rather than low.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-17 09:17:27 -05:00
Mike Frysinger
7d6900ebe1 Blackfin: spi: fix pin handling of SPI0 SSEL4
CS4 on SPI0 has a dedicated PH8 pin which needs to be enabled as a
peripheral in order to work.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-05-29 17:11:33 -04:00
Todor I Mollov
d04371a116 Blackfin: spi: make cs deassert function deterministic
Blackfin SPI driver was not driving the SPI chip-select high before
putting the chip-select signals into tri-state mode.  This is probably
something that slipped by unnoticed in most designs.  If the signals are
put directly into a tri-state mode, then the board is relying on the
pull-up resistors to pull up the chip-select before the next transaction.
Most of the time this is fine, except when you have two transactions that
follow each other very closely, such as the flash erase and read status
register commands.  In this case I was seeing a 500ns separation between
the transactions.  In my setup, with a 10kOhm pull-up, it would meet
timing spec about half the time and resulted in intermittent errors.  (A
stronger pull up would fix this, but our design is targeted for low power
consumption and a 3.3kOhm @ 3.3v is 3.3mW of needless power consumption.)
I modified the spi_cs_deactivate() function in bfin_spi.c to drive the
chip-selects high before putting them into tri-state.  For me, this
resulted in a rise time of 5ns instead of the previous rise time of about
1us, and fully satisfied the timing spec of the chip.

Signed-off-by: Todor I Mollov <tmollov@ucsd.edu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-06 03:49:31 -04:00
Mike Frysinger
bc72f50a65 Blackfin: add BF538/BF539 SPI portmux handling
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-04-02 06:42:18 -04:00
Sonic Zhang
974473caa7 Blackfin: spi: there is no PORTJ_FER MMR on BF537
Since the PORTJ on the BF537 is peripheral-only (no GPIO functionality),
then there is no PORTJ_FER register for us to worry about.

Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-03-23 15:14:52 -04:00
Mike Frysinger
400f5778f3 Blackfin: add driver for on-chip SPI controller
This fills out the SPI backend for the Blackfin on-chip SPI peripheral.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-02-02 12:24:30 -05:00