Commit graph

16 commits

Author SHA1 Message Date
Haiying Wang
dfb49108e4 Pass dimm parameters to populate populate controller options
Because some dimm parameters like n_ranks needs to be used with the board
frequency to choose the board parameters like clk_adjust etc. in the
board_specific_paramesters table of the board ddr file, we need to pass
the dimm parameters to the board file.

* move ddr dimm parameters header file from /cpu to /include directory.
* add ddr dimm parameters to populate board specific options.
* Fix fsl_ddr_board_options() for all the 8xxx boards which call this function.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2008-10-18 21:54:04 +02:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Kumar Gala
9bd4e5911b FSL DDR: Convert SBC8641D to new DDR code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-27 02:06:04 +02:00
Wolfgang Denk
c8a3b109f0 Cleanup out-or-tree building for some boards (.depend)
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-07-02 23:49:18 +02:00
Becky Bruce
9973e3c614 Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 08:50:18 +02:00
Kumar Gala
859a86a25c 85xx/86xx: Move to dynamic mgmt of LAWs
With the new LAW interface (set_next_law) we can move to letting the
system allocate which LAWs are used for what purpose.  This makes life
a bit easier going forward with the new DDR code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-11 01:52:23 -05:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00
Kumar Gala
45239cf415 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
All the 85xx and 86xx UM describe the register as timing_cfg_3
not as ext_refrec.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-29 11:44:29 -05:00
Jon Loeliger
a30a549a35 Remove erroneous or extra spd.h #includers.
Many of the spd.h #includers don't need it,
and wanted to have spd_sdram() declared instead.
Since they didn't get that, some also had open
coded extern declarations of it instead or as well.
Fix it all up by using spd_sdram.h where needed.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-05 00:17:43 +01:00
Jon Loeliger
33fa5c0bfa 86xx: Fix renamed GUR symbols in sbc8641d board.
Back in commit a551cee99a
(86xx: Fix GUR PCI config registers properly), we should have
changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
symbols in the sbc8641d board as well.  Fix this oversight.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-25 13:18:12 -06:00
Jon Loeliger
13f5433f70 86xx: Convert sbc8641d to use libfdt.
This is the proper fix for a missing closing brace in the function
ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
The ft_cpu_setup() function in mpc8641hpcn.c should have been
removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
but was missed.  Only, the sbc8641d was nominally still using it.
It all got ripped out, and the funcality that was in ft_board_setup()
was refactored to remove the CPU portions into the new file
cpu/mpc86xx/fdt.c instead.  Make sbc8641d use this now.

Based loosely on an original patch from joe.hamman@embeddedspecialties.com

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-02-18 14:01:56 -06:00
Becky Bruce
9cd32426f2 86xx: Remove old-style law setup code
This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-24 12:12:40 -06:00
Becky Bruce
713d818664 86xx: Convert sbc8641d to use new law setup code.
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-01-24 12:12:36 -06:00
Wolfgang Denk
64134f0112 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
With recent toolchain versions, some boards would not build because
or errors like this one (here for ocotea board when building with
ELDK 4.2 beta):
ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]

For many boards, the .bss section is big enough that it wraps around
at the end of the address space (0xFFFFFFFF), so the problem will not
be visible unless you use a 64 bit tool chain for development. On
some boards however, changes to the code size (due to different
optimizations) we bail out with section overlaps like above.

The fix is to add the NOLOAD attribute to the .bss and .sbss
sections, telling the linker that .bss does not consume any space in
the image.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-01-12 20:31:39 +01:00
Joe Hamman
cca34967cb Modify SBC8641D to use new Freescale PCI routines
PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
adapter.

Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
Signde-off-by: Jon Loeliger <jdl@freescale.com>
2007-08-13 10:54:44 -05:00
Joe Hamman
8ac273271d Add support for SBC8641D. Board files.
Add support for Wind River's SBC8641D reference board.

Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Jon Loeliger <jdl@freescale.com>
2007-08-10 14:30:30 -05:00