Commit graph

26 commits

Author SHA1 Message Date
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Peter Tyser
abbb90666d Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2008-10-14 14:45:31 +02:00
Jean-Christophe PLAGNIOL-VILLARD
0e8d158664 rename CFG_ENV macros to CONFIG_ENV
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:06 +02:00
Jean-Christophe PLAGNIOL-VILLARD
5a1aceb068 rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-09-10 22:48:04 +02:00
Stefan Roese
f2302d4430 Fix merge problems
Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-06 14:05:38 +02:00
Jean-Christophe PLAGNIOL-VILLARD
4e62041023 Use config_cmd_default.h instead of config_cmd_all.h
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2007-11-03 22:12:01 +01:00
Wolfgang Denk
67c31036ac TQM8xx[LM]: Fix broken environment alignment.
With recent toolchains, the environment sectors were no longer aligned to
sector boundaries. The reason was a combination of two bugs:

1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
   for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
   this gets defined, is not included here (and cannot be included
   without causing lots of problems).

   Added a new #define CFG_USE_PPCENV for all boards which really
   want to put the environment is a ".ppcenv" section.

2) The linker scripts just include environment.o, silently assuming
   that the objects in that file are really in the order in which
   they are coded in the C file, i. e. "environment" first, then
   "redundand_environment", and "env_size" last. However, current
   toolchains (GCC-4.x) reorder the objects, causing the environment
   data not to start on a flash sector boundary:

   Instead of:					we got:

	40008000 T environment			40008000 T env_size
	4000c000 T redundand_environment	40008004 T redundand_environment
	40010000 T env_size			4000c004 T environment

   Note: this patch fixes just the first part, and cures the alignment
   problem by making sure that "env_size" gets placed correctly. However,
   we still have a potential issue because primary and redundant
   environment sectors are actually swapped, i. e. we have now:

	40008000 T redundand_environment
	4000c000 T environment
	40010000 T env_size

   This shall be fixed in the next version.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-09-16 17:20:37 +02:00
Wolfgang Denk
cdd917a43d Fix build errors and warnings / code cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-08-02 00:48:45 +02:00
Jon Loeliger
7f5c015774 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
used to be included but CONFIG_BOOTP_MASK was not defined.

Remove lingering references to CFG_CMD_* symbols.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-10 09:38:02 -05:00
Jon Loeliger
639221c76c include/: Remove obsolete references to CONFIG_COMMANDS
Mostly removed from comments here.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 17:15:49 -05:00
Jon Loeliger
48d5d102a2 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-05 11:04:55 +02:00
Wolfgang Denk
2b792afcc5 * Fix PHY address argument passing with mii info command
Patch by Andrew Dyer, 28 Dec 2004

* Cleanup: fix broken builds
2005-09-24 21:54:50 +02:00
Wolfgang Denk
700a0c648d Add common (with Linux) MTD partition scheme and "mtdparts" command
Old, obsolete and duplicated code was cleaned up and replace by the
new partitioning method. There are two possible approaches now:
* define a single, static partition
* use mtdparts command line option and dynamic partitioning
Default is static partitioning.
2005-08-08 01:03:24 +02:00
Jon Loeliger
9c4c5ae3e1 * Patch by Jon Loeliger, Kumar Gala 2005-02-08
- Convert the CPM2 based functionality to use new CONFIG_CPM2
    option rather than a myriad of CONFIG_MPC8560-like variants.
    Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
    Eliminates the CONFIG_MPC8560 option entirely.  Distributes the
    new CONFIG_CPM2 option to each 8260 board.
2005-07-23 10:37:35 -05:00
wdenk
e2ffd59b4d * Code cleanup, mostly for GCC-3.3.x
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
  pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
  additional ethernet addresses.

* Cleanup drivers/i82365.c - avoid duplication of code

* Fix bogus "cannot span across banks" flash error message

* Add support for CompactFlash for the CPC45 Board.
2004-12-31 09:32:47 +00:00
wdenk
48abe7bfab Patch by Robert Schwebel, 13 May 2004:
Add 'imgextract' command: extract one part of a multi file image.
2004-06-09 10:15:00 +00:00
wdenk
b79a11cc2b Code cleanup 2004-03-25 15:14:43 +00:00
wdenk
c837dcb1a3 * The PS/2 mux on the BMS2003 board needs 450 ms after power on
before we can access it; add delay in case we are faster (with no
  CF card inserted)

* Cleanup of some init functions

* Make sure SCC Ethernet is always stopped by the time we boot Linux
  to avoid Linux crashes by early packets coming in.

* Accelerate flash accesses on LWMON board by using buffered writes
2004-01-20 23:12:12 +00:00
wdenk
592c5cabe7 Patch by Murray Jensen, 20 Jun 2003:
- hymod update
- cleanup (especially for gcc-3.x compilers)
2003-06-21 00:17:24 +00:00
wdenk
6dd652fa4d Patches by Murray Jensen, 17 Jun 2003:
- Hymod board database mods: add "who" field and new xilinx chip types
- provide new "init_cmd_timeout()" function so code external to
  "common/main.c" can use the "reset_cmd_timeout()" function before
  entering the main loop
- add DTT support for adm1021 (new file dtt/adm1021.c; config
  slightly different. see include/configs/hymod.h for an example
  (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
  CFG_DTT_ADM1021 defined)
- add new "eeprom_probe()" function which has similar args and
  behaves in a similar way to "eeprom_read()" etc.
- add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
  function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
- gdbtools copyright update
- ensure that set_msr() executes the "sync" and "isync" instructions
  after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
- 8260 I/O ports fix: Open Drain should be set last when configuring
- add SIU IRQ defines for 8260
- allow LDSCRIPT override and OBJCFLAGS initialization: change to
  config.mk to allow board configurations to override the GNU
  linker script, selected via the LDSCRIPT, make variable, and to
  give an initial value to the OBJCFLAGS make variable
- 8260 i2c enhancement:
  o correctly extends the timeout depending on the size of all
    queued messages for both transmit and receive
  o will not continue with receive if transmit times out
  o ensures that the error callback is done for all queued tx
    and rx messages
  o correctly detects both tx and rx timeouts, only delivers one to
    the callback, and does not overwrite an earlier error
  o logic in i2c_probe now correct
- add "vprintf()" function so that "panic()" function can be
  technically correct
- many Hymod board changes
2003-06-19 23:40:20 +00:00
wdenk
71f9511803 * Fix CONFIG_NET_MULTI support in include/net.h
* Patches by Kyle Harris, 13 Mar 2003:
  - Add FAT partition support
  - Add command support for FAT
  - Add command support for MMC
  ----
  - Add Intel PXA support for video
  - Add Intel PXA support for MMC
  ----
  - Enable MMC and FAT for lubbock board
  - Other misc changes for lubbock board
2003-06-15 22:40:42 +00:00
wdenk
824a1ebffe Compile fixes 2003-04-20 16:49:37 +00:00
wdenk
ac6dbb85b7 Make compile clean, fix the usual small problems. 2003-03-26 11:42:53 +00:00
wdenk
2262cfeef9 * Patch by Daniel Engström, 13 Nov 2002:
Add support for i386 architecture and AMD SC520 board

* Patch by Pierre Aubert, 12 Nov 2002:
  Add support for DOS filesystem and booting from DOS floppy disk
2002-11-18 00:14:45 +00:00
wdenk
1d0350ed0b * Patch by Jim Sandoz, 07 Nov 2002:
Increase number of network RX buffers (PKTBUFSRX in
  "include/net.h") for EEPRO100 based boards (especially SP8240)
  which showed "Receiver is not ready" errors when U-Boot was
  processing the receive buffers slower than the network controller
  was filling them.

* Get rid of obsolete include/mpc74xx.h
2002-11-11 21:14:20 +00:00
wdenk
8966f33788 Initial revision 2002-10-31 23:30:59 +00:00